提交 5284e1b4 编写于 作者: S Steve Capper 提交者: Will Deacon

arm64: xchg: Implement cmpxchg_double

The arm64 architecture has the ability to exclusively load and store
a pair of registers from an address (ldxp/stxp). Also the SLUB can take
advantage of a cmpxchg_double implementation to avoid taking some
locks.

This patch provides an implementation of cmpxchg_double for 64-bit
pairs, and activates the logic required for the SLUB to use these
functions (HAVE_ALIGNED_STRUCT_PAGE and HAVE_CMPXCHG_DOUBLE).

Also definitions of this_cpu_cmpxchg_8 and this_cpu_cmpxchg_double_8
are wired up to cmpxchg_local and cmpxchg_double_local (rather than the
stock implementations that perform non-atomic operations with
interrupts disabled) as they are used by the SLUB.

On a Juno platform running on only the A57s I get quite a noticeable
performance improvement with 5 runs of hackbench on v3.17:

         Baseline | With Patch
 -----------------+-----------
 Mean    119.2312 | 106.1782
 StdDev    0.4919 |   0.4494

(times taken to complete `./hackbench 100 process 1000', in seconds)
Signed-off-by: NSteve Capper <steve.capper@linaro.org>
Signed-off-by: NWill Deacon <will.deacon@arm.com>
上级 70ddb63a
......@@ -34,6 +34,7 @@ config ARM64
select GENERIC_TIME_VSYSCALL
select HANDLE_DOMAIN_IRQ
select HARDIRQS_SW_RESEND
select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KGDB
......@@ -41,6 +42,7 @@ config ARM64
select HAVE_BPF_JIT
select HAVE_C_RECORDMCOUNT
select HAVE_CC_STACKPROTECTOR
select HAVE_CMPXCHG_DOUBLE
select HAVE_DEBUG_BUGVERBOSE
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_API_DEBUG
......
......@@ -19,6 +19,7 @@
#define __ASM_CMPXCHG_H
#include <linux/bug.h>
#include <linux/mmdebug.h>
#include <asm/barrier.h>
......@@ -152,6 +153,51 @@ static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
return oldval;
}
#define system_has_cmpxchg_double() 1
static inline int __cmpxchg_double(volatile void *ptr1, volatile void *ptr2,
unsigned long old1, unsigned long old2,
unsigned long new1, unsigned long new2, int size)
{
unsigned long loop, lost;
switch (size) {
case 8:
VM_BUG_ON((unsigned long *)ptr2 - (unsigned long *)ptr1 != 1);
do {
asm volatile("// __cmpxchg_double8\n"
" ldxp %0, %1, %2\n"
" eor %0, %0, %3\n"
" eor %1, %1, %4\n"
" orr %1, %0, %1\n"
" mov %w0, #0\n"
" cbnz %1, 1f\n"
" stxp %w0, %5, %6, %2\n"
"1:\n"
: "=&r"(loop), "=&r"(lost), "+Q" (*(u64 *)ptr1)
: "r" (old1), "r"(old2), "r"(new1), "r"(new2));
} while (loop);
break;
default:
BUILD_BUG();
}
return !lost;
}
static inline int __cmpxchg_double_mb(volatile void *ptr1, volatile void *ptr2,
unsigned long old1, unsigned long old2,
unsigned long new1, unsigned long new2, int size)
{
int ret;
smp_mb();
ret = __cmpxchg_double(ptr1, ptr2, old1, old2, new1, new2, size);
smp_mb();
return ret;
}
static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{
......@@ -182,6 +228,31 @@ static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
__ret; \
})
#define cmpxchg_double(ptr1, ptr2, o1, o2, n1, n2) \
({\
int __ret;\
__ret = __cmpxchg_double_mb((ptr1), (ptr2), (unsigned long)(o1), \
(unsigned long)(o2), (unsigned long)(n1), \
(unsigned long)(n2), sizeof(*(ptr1)));\
__ret; \
})
#define cmpxchg_double_local(ptr1, ptr2, o1, o2, n1, n2) \
({\
int __ret;\
__ret = __cmpxchg_double((ptr1), (ptr2), (unsigned long)(o1), \
(unsigned long)(o2), (unsigned long)(n1), \
(unsigned long)(n2), sizeof(*(ptr1)));\
__ret; \
})
#define this_cpu_cmpxchg_8(ptr, o, n) \
cmpxchg_local(raw_cpu_ptr(&(ptr)), o, n)
#define this_cpu_cmpxchg_double_8(ptr1, ptr2, o1, o2, n1, n2) \
cmpxchg_double_local(raw_cpu_ptr(&(ptr1)), raw_cpu_ptr(&(ptr2)), \
o1, o2, n1, n2)
#define cmpxchg64(ptr,o,n) cmpxchg((ptr),(o),(n))
#define cmpxchg64_local(ptr,o,n) cmpxchg_local((ptr),(o),(n))
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册