- 25 5月, 2011 2 次提交
-
-
no-one use it and it's nearly impossible get a board to work on it and the Mainline implementation was never finished Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Cc: Andrew Victor <linux@maxim.org.za>
-
no board configure it as 'n' and it's an issue to merge all defconfigs in one On AT91SAM926x boards both types of NAND flash can be present (8 and 16 bit data bus width). so will pass it via system_rev Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
-
- 23 4月, 2011 1 次提交
-
-
由 Uwe Kleine-König 提交于
commit ee621dd6 (net: atmel_macb Kconfig: remove long dependency line) replaced a list of several explicit machines in the dependencies of MACB by a single symbol that is selected by the respective machines. ee621dd6 missed to let ARCH_AT91CAP9 select HAVE_NET_MACB though which is fixed here. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 15 1月, 2011 2 次提交
-
-
由 Igor Plyatov 提交于
The GS_IA18_S (GMS) is a carrier board from GeoSIG Ltd used with the Stamp9G20 SoM from Taskit company. It operate as an internet accelerometer. Signed-off-by: NIgor Plyatov <plyatov@gmail.com> [nicolas.ferre@atmel.com: rm Kconfig, whitespace fixes, change machine name] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
由 Sergio Tanzilli 提交于
Signed-off-by: NSergio Tanzilli <tanzilli@acmesystems.it> [nicolas.ferre@atmel.com: whitespace fixes, change machine name] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 26 10月, 2010 1 次提交
-
-
由 Peter Gsellmann 提交于
Board is a carrier board for Stamp9G20, with additional peripherals for a building automation system Signed-off-by: NPeter Gsellmann <pgsellmann@portner-elektronik.at> [nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io] Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 18 10月, 2010 1 次提交
-
-
由 Justin P. Mattock 提交于
The patch below updates broken web addresses in the arch directory. Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org> Cc: Finn Thain <fthain@telegraphics.com.au> Cc: Randy Dunlap <rdunlap@xenotime.net> Reviewed-by: NFinn Thain <fthain@telegraphics.com.au> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 08 10月, 2010 3 次提交
-
-
Many Atmel SOC are embedding a MACB controller. This patch removes the long dependency line for this Atmel MACB ethernet driver configuration entry. The HAVE_NET_MACB configuration option is located in the net Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: David Miller <davem@davemloft.net> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAndrew Victor <linux@maxim.org.za>
-
The board-sam9g20ek-2slot-mmc.c was a revision of the at91sam9g20ek since board revision C. It contains 2 sd/mmc slots. This merge keep the support of the old machine ID MACH_AT91SAM9G20EK_2MMC for backward compatibility. Now we use the ATAG to pass the hardware functionality to kernel with this board revision encoding bit 0: 0 => 1 sd/mmc slot 1 => 2 sd/mmc slots connectors (board from revision C) system_rev tested on Barebox commit d8f3ee103a9f4bd Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
Today the board use 2 machines id AT91SAM9G45EKES and AT91SAM9M10G45EK now will use only AT91SAM9M10G45EK. The other boards revision will be specified via system_rev. for 9g45ekes, m10g45ekes and m10g45ek boards and revisions Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com> Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
-
- 05 10月, 2010 1 次提交
-
-
由 Maxim Osipov 提交于
This patch adds support for Flexibity Connect platform from http://www.flexibity.com/ (AT91SAM9260 based). Signed-off-by: NMaxim Osipov <maxim.osipov@gmail.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 09 7月, 2010 1 次提交
-
-
由 Ryan Mallon 提交于
Add support for Bluewater Systems Snapper 9260/9G20 modules Signed-off-by: NRyan Mallon <ryan@bluewatersys.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 5月, 2010 1 次提交
-
-
由 Russell King 提交于
GENERIC_TIME is now enabled by default, so 'select GENERIC_TIME' is redundant. Remove them. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 14 4月, 2010 1 次提交
-
-
由 Christian Glindkamp 提交于
Both boards share the same board file, as the PortuxG20 is basically an SBC based on the Stamp9G20. Signed-off-by: NChristian Glindkamp <christian.glindkamp@taskit.de> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 24 3月, 2010 1 次提交
-
-
由 John Stultz 提交于
Convert arm to use GENERIC_TIME via the arch_getoffset() infrastructure, reducing the amount of arch specific code we need to maintain. The arm architecture is the last arch that need to be converted. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org>
-
- 20 1月, 2010 2 次提交
-
-
由 Andrew Victor 提交于
Add support for the Atmel AT572D940HF-EK board (development board for the AT572D940HF processor). Signed-off-by: NAntonio R. Costa <costa.antonior@gmail.com> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Add support for the Atmel AT572D940HF processor (DIOPSIS range). This processor integrates an ARM926 core, a DSP and the SoC peripherals usually found on an AT91 processor (USART, SSC, SPI, TWI, CAN, etc) Signed-off-by: NAntonio R. Costa <costa.antonior@gmail.com> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 11月, 2009 5 次提交
-
-
由 Nicolas Ferre 提交于
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAndrew Victor <linux@maxim.org.za>
-
由 Nicolas Ferre 提交于
Many Atmel SOC are embedding a LCD controller. This patch removes the long dependency line for this Atmel LCD framebuffer driver configuration entry. The HAVE_FB_ATMEL configuration option is located in the video Kconfig file as it may be setup by ARM/AT91 and AVR32 chips. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: NAndrew Victor <linux@maxim.org.za>
-
Instead of adding "depends on" at config level, introduce HAVE_* config variables. Add them at machine or soc level to specify the ability of a particular support. It will ease new board introduction and readability. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAndrew Victor <linux@maxim.org.za>
-
Those "depends on" are a double check as all machine entries are surrounded by "if <ARCH_xxx>" conditions. Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAndrew Victor <linux@maxim.org.za>
-
由 Nicolas Ferre 提交于
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAndrew Victor <linux@maxim.org.za>
-
- 11 11月, 2009 1 次提交
-
-
由 Uwe Kleine-König 提交于
CONFIG_MACH_ECO920 is enabled in at91rm9200dk_defconfig. The name is wrong, but this is better than adding another defconfig or don't get compile coverage at all. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 23 9月, 2009 1 次提交
-
-
由 Rob Emanuele 提交于
Created a modified version of the at91sam9g20 evaluation kit platform (board-sam9g20ek-2slot-mmc.c) and device support to make use of the updated atmel-mci driver. As the use of two slots modify GPIO pin allocation, we create another board file. This requires getting the most updated arch/arm/tools/mach-types from http://www.arm.linux.org.uk/developer/machines/download.php to have the machine type for the at91sam9g20ek-2slot-mmc board. [nicolas.ferre@atmel.com: printk, slot_count modification in at91sam9260_devices.c file] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NRob Emanuele <rob@emanuele.us> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Russell King <rmk@arm.linux.org.uk> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 31 7月, 2009 2 次提交
-
-
由 Eric Bénard 提交于
CPUAT91 is based on Atmel's AT91RM9200 with up to 16MB Strataflash, up to 128MB SDRAM and an ethernet PHY in RMII mode. Signed-off-by: NEric Benard <ebenard@eukrea.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Eric Bénard 提交于
CPU9260 and CPU9G20 share the same PCB populated with either Atmel's AT91SAM9260B or AT91SAM9G20B with up to 64MB Strataflash, up to 128MB SDRAM, up to 2GB NAND and an ethernet PHY in RMII mode. Signed-off-by: NEric Benard <eric@eukrea.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 7月, 2009 1 次提交
-
-
由 Nicolas Ferre 提交于
From: Hong Xu <hong.xu@atmel.com> Here are the modification to at91sam9261 files dedicated to the support of at91sam9g10. This direction has been adopted to minimize code duplication. All at91sam9261 drivers are enabled in _devices and board- files. Modificaton to peripherals that support at91sam9g10 will be added in future patches. Signed-off-by: NHong Xu <hong.xu@atmel.com> Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 6月, 2009 1 次提交
-
-
由 Nicolas Ferre 提交于
Here are the at91 specific files dedicated to the at91sam9g45 series. They mimic the traditional at91 way of managing chips & boards. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. In the future, the main board for this 9g45 series will be the AT91SAM9M10G45-EK (I choose this last name for the board file). Simple drivers are enabled in _devices and board- files. Newer peripheral support will be added in future patches. Incuded peripherals support (for now): - USART - SPI - Ethernet - NAND flash - LCD - gpio/joystick/buttons - leds and pwm Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 12月, 2008 1 次提交
-
-
由 Andrew Victor 提交于
Add support for the Adeneo NeoCore 926 board. Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 27 11月, 2008 1 次提交
-
-
由 Russell King 提交于
Rather than: config CPU_BLAH bool depends on ARCH_FOO || MACH_BAR default y if ARCH_FOO || MACH_BAR arrange for ARCH_FOO and MACH_BAR to select CPU_BLAH directly. Acked-by: NNicolas Pitre <nico@marvell.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Acked-by: NBrian Swetland <swetland@google.com> Acked-by: NEric Miao <eric.miao@marvell.com> Acked-by: NNicolas Bellido <ml@acolin.be> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 22 9月, 2008 1 次提交
-
-
由 Andrew Victor 提交于
This patch adds support for a low(er)-power suspend-to-RAM. In addition to the SDRAM being put into self-refresh mode, the Master Clock is set to the Slow-clock rate (32Khz) and PLLA & PLLB are disabled. Certain peripherals are therefore also disabled, and thus cannot be used as wakeup sources. This patch has been included in the AT91 patches in various forms since 2.6.19 and a number of people have worked or commented on it, most notably: Savin Zlobec (for the original AT91RM9200 support) Anti Sullin (for the SAM9260 version) David Brownell, etc. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 9月, 2008 1 次提交
-
-
由 Sergey Lapin 提交于
This patch adds support for AT91SAM9260-based board AFEB9260 which is a product from both Open Source design which runs Open Source software. Some commertial projects are made with this design. A board is basically AT91SAM9260-EK with some modifications and different peripherals and different parts used. Main purpose of this project is to gain experience in hardware design. More info: http://groups.google.com/group/arm9fpga-evolution-board (In Russian only, sorry). Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb By this patch only basic functionality is provided. Signed-off-by: NSergey Lapin <slapin@ossfans.org> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 01 8月, 2008 1 次提交
-
-
由 Pieter du Preez 提交于
Structs called at91_nand_data where renamed to atmel_nand_data and configs called *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL*. This was unfortunately not done consistently, causing NAND chips not being initialised on several ARM boards. I am aware that the author of the original change did not rename MTD_NAND_AT91_BUSWIDTH to MTD_NAND_ATMEL_BUSWIDTH, for example. All *MTD_NAND_AT91* where renamed to *MTD_NAND_ATMEL* in order to keep naming consistency. This patch was only tested on a MACH_SAM9_L9260, as this is the only ARM board I have to my disposal. Before this patch: $ git-ls-files |xargs grep atmel_nand |wc -l 105 $ git-ls-files |xargs grep at91_nand |wc -l 4 $ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l 8 $ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l 47 After this patch: $ git-ls-files |xargs grep atmel_nand |wc -l 109 $ git-ls-files |xargs grep at91_nand |wc -l 0 $ git-ls-files |xargs grep MTD_NAND_ATMEL |wc -l 55 $ git-ls-files |xargs grep MTD_NAND_AT91 |wc -l 0 Signed-off-by: NPieter du Preez <pdupreez@gmail.com> Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
-
- 10 7月, 2008 1 次提交
-
-
由 sedji gaouaou 提交于
Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. We created a new board for this device but based the chip support directly on 9260 files with little updates. Here is the chip page on Atmel wabsite: http://atmel.com/dyn/products/product_card.asp?part_id=4337Signed-off-by: NSedji Gaouaou <sedji.gaouaou@atmel.com> Signed-off-by: NJustin Waters <justin.waters@timesys.com> Acked-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 02 6月, 2008 2 次提交
-
-
由 Andrew Victor 提交于
Add support for three AT91-based boards available from Calao Systems: USB_A9260, USB_A9263 and QIL_A9260. Signed-off-by: NGrégory Hermant <gregory.hermant@calao-systems.com> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Cleanup the YL9200 board-support file. Other things fixed are: - Use new-style UART initialization - Register all LEDs as gpio_leds. - NOR Flash error noted in comments fixed by increasing YL9200_FLASH_SIZE - The only I2C device is the AT24C eeprom. - Setup of NWAIT pin and programming of SMC controller for the LCD/VGA. - Configure touchscreen interrupt pin. Also adding the board to the KConfig and Makefile. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 4月, 2008 4 次提交
-
-
由 Andrew Victor 提交于
Update AT91SAM9/CAP9 PIT driver to use generic time and clockevent infrastructure: - Clocksource gives sub-microsecond timestamp precision, assuming memory is clocked at over 16 MHz. It's less than a 32 bit counter, unless it's is also generating IRQs. - Clockevent device supports periodic mode only; no oneshot support from this hardware. No IRQs generated unless it's the active clocksource. Later, another timer (probably from a TC module) can provide a oneshot clockevent device to get NO_HZ and High-Res-Timer behavior. This also updates the timekeeping to use the actual master clock rate on the system, instead of compile-time <asm/arch/timex.h> constants matching what Atmel's EK boards use. (Product boards may well differ!) Plus cleanup: rename "*_timer*" symbols to "*_pit*" (there are other timers, but only one PIT); shorter lines; remove needless CPP stuff; make several symbols static; etc. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Support for the emQbit ECB_AT91 board. <http://wiki.emqbit.com/free-ecb-at91> Original patch from Nelson Castillo. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Support for the Olimex SAM9-L9260 board. <http://www.olimex.com/dev/sam9-L9260.html> Original patch from Ivan Vasilev. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Andrew Victor 提交于
Support for the Kwikbyte KB9260 (CAM60) board. <http://www.kwikbyte.com/KB9260.html> Original patch from Kwikbyte. Signed-off-by: NAndrew Victor <linux@maxim.org.za> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-