AT91: atmel-mci: Platform configuration to the the atmel-mci driver

Created a modified version of the at91sam9g20 evaluation kit platform
(board-sam9g20ek-2slot-mmc.c) and device support to make use of the
updated atmel-mci driver.

As the use of two slots modify GPIO pin allocation, we create another
board file.

This requires getting the most updated arch/arm/tools/mach-types from
http://www.arm.linux.org.uk/developer/machines/download.php to have the machine
type for the at91sam9g20ek-2slot-mmc board.

[nicolas.ferre@atmel.com: printk, slot_count modification in at91sam9260_devices.c file]
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: NRob Emanuele <rob@emanuele.us>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: <linux-mmc@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/arm/mach-at91/Kconfig

@@ -289,6 +289,13 @@ config MACH_NEOCORE926
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
+config MACH_AT91SAM9G20EK_2MMC
+	bool "Atmel AT91SAM9G20-EK Evaluation Kit modified for 2 MMC Slots"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
+	  Rev A or B modified for 2 MMC Slots.
+
 endif
 
 # ----------------------------------------------------------

arch/arm/mach-at91/Makefile

@@ -59,6 +59,7 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK)	+= board-sam9rlek.o
 
 # AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
+obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
 obj-$(CONFIG_MACH_CPU9G20)	+= board-cpu9krea.o
 
 # AT91SAM9G45 board-specific support

arch/arm/mach-at91/at91sam9260_devices.c

@@ -278,6 +278,102 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  MMC / SD Slot for Atmel MCI Driver
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static u64 mmc_dmamask = DMA_BIT_MASK(32);
+static struct mci_platform_data mmc_data;
+
+static struct resource mmc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9260_BASE_MCI,
+		.end	= AT91SAM9260_BASE_MCI + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9260_ID_MCI,
+		.end	= AT91SAM9260_ID_MCI,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9260_mmc_device = {
+	.name		= "atmel_mci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &mmc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &mmc_data,
+	},
+	.resource	= mmc_resources,
+	.num_resources	= ARRAY_SIZE(mmc_resources),
+};
+
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
+{
+	unsigned int i;
+	unsigned int slot_count = 0;
+
+	if (!data)
+		return;
+
+	for (i = 0; i < ATMEL_MCI_MAX_NR_SLOTS; i++) {
+		if (data->slot[i].bus_width) {
+			/* input/irq */
+			if (data->slot[i].detect_pin) {
+				at91_set_gpio_input(data->slot[i].detect_pin, 1);
+				at91_set_deglitch(data->slot[i].detect_pin, 1);
+			}
+			if (data->slot[i].wp_pin)
+				at91_set_gpio_input(data->slot[i].wp_pin, 1);
+
+			switch (i) {
+			case 0:
+				/* CMD */
+				at91_set_A_periph(AT91_PIN_PA7, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_A_periph(AT91_PIN_PA6, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_A_periph(AT91_PIN_PA9, 1);
+					at91_set_A_periph(AT91_PIN_PA10, 1);
+					at91_set_A_periph(AT91_PIN_PA11, 1);
+				}
+				slot_count++;
+				break;
+			case 1:
+				/* CMD */
+				at91_set_B_periph(AT91_PIN_PA1, 1);
+				/* DAT0, maybe DAT1..DAT3 */
+				at91_set_B_periph(AT91_PIN_PA0, 1);
+				if (data->slot[i].bus_width == 4) {
+					at91_set_B_periph(AT91_PIN_PA5, 1);
+					at91_set_B_periph(AT91_PIN_PA4, 1);
+					at91_set_B_periph(AT91_PIN_PA3, 1);
+				}
+				slot_count++;
+				break;
+			default:
+				printk(KERN_ERR
+					"AT91: SD/MMC slot %d not available\n", i);
+				break;
+			}
+		}
+	}
+
+	if (slot_count) {
+		/* CLK */
+		at91_set_A_periph(AT91_PIN_PA8, 0);
+
+		mmc_data = *data;
+		platform_device_register(&at91sam9260_mmc_device);
+	}
+}
+#else
+void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
+#endif
+
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia

arch/arm/mach-at91/board-sam9g20ek-2slot-mmc.c

+/*
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2008 Atmel
+ *  Copyright (C) 2009 Rob Emanuele
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/at73c213.h>
+#include <linux/clk.h>
+
+#include <mach/hardware.h>
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9_smc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91sam9260_initialize(18432000);
+
+	/* DGBU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
+	at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+	at91sam9260_init_interrupts(NULL);
+}
+
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PC5,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info ek_spi_devices[] = {
+#if !defined(CONFIG_MMC_ATMELMCI)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
+	{	/* DataFlash card */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	},
+#endif
+#endif
+};
+
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PC12,
+	.is_rmii	= 1,
+};
+
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name   = "Bootstrap",
+		.offset = 0,
+		.size   = 4 * SZ_1M,
+	},
+	{
+		.name	= "Partition 1",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 60 * SZ_1M,
+	},
+	{
+		.name	= "Partition 2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+/* det_pin is not connected */
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+	.rdy_pin	= AT91_PIN_PC13,
+	.enable_pin	= AT91_PIN_PC14,
+	.partition_info	= nand_partitions,
+#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
+	.bus_width_16	= 1,
+#else
+	.bus_width_16	= 0,
+#endif
+};
+
+static struct sam9_smc_config __initdata ek_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	/* setup bus-width (8 or 16) */
+	if (ek_nand_data.bus_width_16)
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
+	else
+		ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
+
+	/* configure chip-select 3 (NAND) */
+	sam9_smc_configure(3, &ek_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * MCI (SD/MMC)
+ * det_pin and wp_pin are not connected
+ */
+#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
+static struct mci_platform_data __initdata ek_mmc_data = {
+	.slot[0] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+	.slot[1] = {
+		.bus_width	= 4,
+		.detect_pin	= -ENODEV,
+		.wp_pin		= -ENODEV,
+	},
+
+};
+#else
+static struct amci_platform_data __initdata ek_mmc_data = {
+};
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* "bottom" led, green, userled1 to be defined */
+		.name			= "ds5",
+		.gpio			= AT91_PIN_PB12,
+		.active_low		= 1,
+		.default_trigger	= "none",
+	},
+	{	/* "power" led, yellow */
+		.name			= "ds1",
+		.gpio			= AT91_PIN_PB13,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c512", 0x50),
+	},
+};
+
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	at91_add_device_udc(&ek_udc_data);
+	/* SPI */
+	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+	/* NAND */
+	ek_add_device_nand();
+	/* Ethernet */
+	at91_add_device_eth(&ek_macb_data);
+	/* MMC */
+	at91_add_device_mci(0, &ek_mmc_data);
+	/* I2C */
+	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+	/* LEDs */
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+	/* PCK0 provides MCLK to the WM8731 */
+	at91_set_B_periph(AT91_PIN_PC1, 0);
+	/* SSC (for WM8731) */
+	at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
+}
+
+MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
+	/* Maintainer: Rob Emanuele */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91sam926x_timer,
+	.map_io		= ek_map_io,
+	.init_irq	= ek_init_irq,
+	.init_machine	= ek_board_init,
+MACHINE_END

arch/arm/mach-at91/include/mach/board.h

@@ -37,6 +37,7 @@
 #include <linux/leds.h>
 #include <linux/spi/spi.h>
 #include <linux/usb/atmel_usba_udc.h>
+#include <linux/atmel-mci.h>
 #include <sound/atmel-ac97c.h>
 
  /* USB Device */
@@ -64,6 +65,7 @@ struct at91_cf_data {
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
  /* MMC / SD */
+  /* at91_mci platform config */
 struct at91_mmc_data {
 	u8		det_pin;	/* card detect IRQ */
 	unsigned	slot_b:1;	/* uses Slot B */
@@ -73,6 +75,9 @@ struct at91_mmc_data {
 };
 extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
+  /* atmel-mci platform config */
+extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
+
  /* Ethernet (EMAC & MACB) */
 struct at91_eth_data {
 	u32		phy_mask;