[ARM] 5570/1: at91: Support for at91sam9g10: core chip & board support

From: Hong Xu <hong.xu@atmel.com>

Here are the modification to at91sam9261 files dedicated to the support of
at91sam9g10. This direction has been adopted to minimize code duplication.

All at91sam9261 drivers are enabled in _devices and board- files. Modificaton
to peripherals that support at91sam9g10 will be added in future patches.
Signed-off-by: NHong Xu <hong.xu@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-at91/Kconfig

@@ -23,6 +23,12 @@ config ARCH_AT91SAM9261
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 
+config ARCH_AT91SAM9G10
+	bool "AT91SAM9G10"
+	select CPU_ARM926T
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
@@ -230,6 +236,21 @@ endif
 
 # ----------------------------------------------------------
 
+if ARCH_AT91SAM9G10
+
+comment "AT91SAM9G10 Board Type"
+
+config MACH_AT91SAM9G10EK
+	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
+	depends on ARCH_AT91SAM9G10
+	help
+	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
+	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
+
+endif
+
+# ----------------------------------------------------------
+
 if ARCH_AT91SAM9263
 
 comment "AT91SAM9263 Board Type"
@@ -337,13 +358,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).

arch/arm/mach-at91/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_AT91_PMC_UNIT)	+= clock.o
 obj-$(CONFIG_ARCH_AT91RM9200)	+= at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
 obj-$(CONFIG_ARCH_AT91SAM9260)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9261)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10)	+= at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9263)	+= at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9RL)	+= at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
 obj-$(CONFIG_ARCH_AT91SAM9G20)	+= at91sam9260.o at91sam926x_time.o at91sam9260_devices.o  sam9_smc.o
@@ -44,6 +45,7 @@ obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 
 # AT91SAM9261 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
+obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o

arch/arm/mach-at91/at91sam9261.c

@@ -16,6 +16,7 @@
 #include <asm/irq.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
+#include <mach/cpu.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91_pmc.h>
 #include <mach/at91_rstc.h>
@@ -30,7 +31,11 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AT91_BASE_SYS),
 		.length		= SZ_16K,
 		.type		= MT_DEVICE,
-	}, {
+	},
+};
+
+static struct map_desc at91sam9261_sram_desc[] __initdata = {
+	{
 		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE,
 		.pfn		= __phys_to_pfn(AT91SAM9261_SRAM_BASE),
 		.length		= AT91SAM9261_SRAM_SIZE,
@@ -38,6 +43,15 @@ static struct map_desc at91sam9261_io_desc[] __initdata = {
 	},
 };
 
+static struct map_desc at91sam9g10_sram_desc[] __initdata = {
+	{
+		.virtual	= AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE,
+		.pfn		= __phys_to_pfn(AT91SAM9G10_SRAM_BASE),
+		.length		= AT91SAM9G10_SRAM_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
 /* --------------------------------------------------------------------
  *  Clocks
  * -------------------------------------------------------------------- */
@@ -263,6 +277,12 @@ void __init at91sam9261_initialize(unsigned long main_clock)
 	/* Map peripherals */
 	iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc));
 
+	if (cpu_is_at91sam9g10())
+		iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc));
+	else
+		iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc));
+
+
 	at91_arch_reset = at91sam9261_reset;
 	pm_power_off = at91sam9261_poweroff;
 	at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)

arch/arm/mach-at91/board-sam9261ek.c

@@ -287,7 +287,11 @@ static void __init ek_add_device_ts(void) {}
  */
 static struct at73c213_board_info at73c213_data = {
 	.ssc_id		= 1,
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 	.shortname	= "AT91SAM9261-EK external DAC",
+#else
+	.shortname	= "AT91SAM9G10-EK external DAC",
+#endif
 };
 
 #if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
@@ -414,6 +418,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_stn_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_stn_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 
 #else
@@ -467,6 +474,9 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data = {
 	.default_monspecs		= &at91fb_default_tft_monspecs,
 	.atmel_lcdfb_power_control	= at91_lcdc_tft_power_control,
 	.guard_time			= 1,
+#if defined(CONFIG_MACH_AT91SAM9G10EK)
+	.lcd_wiring_mode		= ATMEL_LCDC_WIRING_RGB,
+#endif
 };
 #endif
 
@@ -600,7 +610,11 @@ static void __init ek_board_init(void)
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }
 
+#if defined(CONFIG_MACH_AT91SAM9261EK)
 MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
+#else
+MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
+#endif
 	/* Maintainer: Atmel */
 	.phys_io	= AT91_BASE_SYS,
 	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,

arch/arm/mach-at91/pm.c

@@ -201,7 +201,8 @@ static int at91_pm_verify_clocks(void)
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;
 		}
-	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+	} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263()
+			|| cpu_is_at91sam9g20() || cpu_is_at91sam9g10()) {
 		if ((scsr & (AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP)) != 0) {
 			pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
 			return 0;