提交 e6d8a1b0 编写于 作者: J Joe Eykholt 提交者: James Bottomley

[SCSI] libfc: add host number to lport link up/down messages.

The libfc link up/down messages don't indicate which port is changing.
The Port ID will often be 0.
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>
上级 093bb6a2
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
......@@ -568,8 +568,8 @@ void __fc_linkup(struct fc_lport *lport)
*/
void fc_linkup(struct fc_lport *lport)
{
printk(KERN_INFO "libfc: Link up on port (%6x)\n",
fc_host_port_id(lport->host));
printk(KERN_INFO "host%d: libfc: Link up on port (%6x)\n",
lport->host->host_no, fc_host_port_id(lport->host));
mutex_lock(&lport->lp_mutex);
__fc_linkup(lport);
......@@ -598,8 +598,8 @@ void __fc_linkdown(struct fc_lport *lport)
*/
void fc_linkdown(struct fc_lport *lport)
{
printk(KERN_INFO "libfc: Link down on port (%6x)\n",
fc_host_port_id(lport->host));
printk(KERN_INFO "host%d: libfc: Link down on port (%6x)\n",
lport->host->host_no, fc_host_port_id(lport->host));
mutex_lock(&lport->lp_mutex);
__fc_linkdown(lport);
......@@ -699,8 +699,9 @@ void fc_lport_disc_callback(struct fc_lport *lport, enum fc_disc_event event)
FC_LPORT_DBG(lport, "Discovery succeeded\n");
break;
case DISC_EV_FAILED:
printk(KERN_ERR "libfc: Discovery failed for port (%6x)\n",
fc_host_port_id(lport->host));
printk(KERN_ERR "host%d: libfc: "
"Discovery failed for port (%6x)\n",
lport->host->host_no, fc_host_port_id(lport->host));
mutex_lock(&lport->lp_mutex);
fc_lport_enter_reset(lport);
mutex_unlock(&lport->lp_mutex);
......@@ -791,8 +792,9 @@ static void fc_lport_recv_flogi_req(struct fc_seq *sp_in,
goto out;
remote_wwpn = get_unaligned_be64(&flp->fl_wwpn);
if (remote_wwpn == lport->wwpn) {
printk(KERN_WARNING "libfc: Received FLOGI from port "
"with same WWPN %llx\n", remote_wwpn);
printk(KERN_WARNING "host%d: libfc: Received FLOGI from port "
"with same WWPN %llx\n",
lport->host->host_no, remote_wwpn);
goto out;
}
FC_LPORT_DBG(lport, "FLOGI from port WWPN %llx\n", remote_wwpn);
......@@ -1471,8 +1473,10 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
lport->e_d_tov = e_d_tov;
lport->r_a_tov = 2 * e_d_tov;
fc_lport_set_port_id(lport, did, fp);
printk(KERN_INFO "libfc: Port (%6x) entered "
"point to point mode\n", did);
printk(KERN_INFO "host%d: libfc: "
"Port (%6x) entered "
"point-to-point mode\n",
lport->host->host_no, did);
fc_lport_ptp_setup(lport, ntoh24(fh->fh_s_id),
get_unaligned_be64(
&flp->fl_wwpn),
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部