提交 e29c9bfb 编写于 作者: A Andrew Chew 提交者: Mauro Carvalho Chehab

[media] V4L: ov9740: Reorder video and core ops

This is to avoid needing a forward declaration when ov9740_s_power() (in the
subsequent patch) calls ov9740_s_fmt().
Signed-off-by: NAndrew Chew <achew@nvidia.com>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
上级 970aa9e0
......@@ -573,90 +573,6 @@ static unsigned long ov9740_query_bus_param(struct soc_camera_device *icd)
return soc_camera_apply_sensor_flags(icl, flags);
}
/* Get status of additional camera capabilities */
static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct ov9740_priv *priv = to_ov9740(sd);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
ctrl->value = priv->flag_vflip;
break;
case V4L2_CID_HFLIP:
ctrl->value = priv->flag_hflip;
break;
default:
return -EINVAL;
}
return 0;
}
/* Set status of additional camera capabilities */
static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct ov9740_priv *priv = to_ov9740(sd);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
priv->flag_vflip = ctrl->value;
break;
case V4L2_CID_HFLIP:
priv->flag_hflip = ctrl->value;
break;
default:
return -EINVAL;
}
return 0;
}
/* Get chip identification */
static int ov9740_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *id)
{
struct ov9740_priv *priv = to_ov9740(sd);
id->ident = priv->ident;
id->revision = priv->revision;
return 0;
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int ov9740_get_register(struct v4l2_subdev *sd,
struct v4l2_dbg_register *reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret;
u8 val;
if (reg->reg & ~0xffff)
return -EINVAL;
reg->size = 2;
ret = ov9740_reg_read(client, reg->reg, &val);
if (ret)
return ret;
reg->val = (__u64)val;
return ret;
}
static int ov9740_set_register(struct v4l2_subdev *sd,
struct v4l2_dbg_register *reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
if (reg->reg & ~0xffff || reg->val & ~0xff)
return -EINVAL;
return ov9740_reg_write(client, reg->reg, reg->val);
}
#endif
/* select nearest higher resolution for capture */
static void ov9740_res_roundup(u32 *width, u32 *height)
{
......@@ -863,6 +779,90 @@ static int ov9740_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
return 0;
}
/* Get status of additional camera capabilities */
static int ov9740_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct ov9740_priv *priv = to_ov9740(sd);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
ctrl->value = priv->flag_vflip;
break;
case V4L2_CID_HFLIP:
ctrl->value = priv->flag_hflip;
break;
default:
return -EINVAL;
}
return 0;
}
/* Set status of additional camera capabilities */
static int ov9740_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
struct ov9740_priv *priv = to_ov9740(sd);
switch (ctrl->id) {
case V4L2_CID_VFLIP:
priv->flag_vflip = ctrl->value;
break;
case V4L2_CID_HFLIP:
priv->flag_hflip = ctrl->value;
break;
default:
return -EINVAL;
}
return 0;
}
/* Get chip identification */
static int ov9740_g_chip_ident(struct v4l2_subdev *sd,
struct v4l2_dbg_chip_ident *id)
{
struct ov9740_priv *priv = to_ov9740(sd);
id->ident = priv->ident;
id->revision = priv->revision;
return 0;
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int ov9740_get_register(struct v4l2_subdev *sd,
struct v4l2_dbg_register *reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret;
u8 val;
if (reg->reg & ~0xffff)
return -EINVAL;
reg->size = 2;
ret = ov9740_reg_read(client, reg->reg, &val);
if (ret)
return ret;
reg->val = (__u64)val;
return ret;
}
static int ov9740_set_register(struct v4l2_subdev *sd,
struct v4l2_dbg_register *reg)
{
struct i2c_client *client = v4l2_get_subdevdata(sd);
if (reg->reg & ~0xffff || reg->val & ~0xff)
return -EINVAL;
return ov9740_reg_write(client, reg->reg, reg->val);
}
#endif
static int ov9740_video_probe(struct soc_camera_device *icd,
struct i2c_client *client)
{
......@@ -929,6 +929,15 @@ static struct soc_camera_ops ov9740_ops = {
.num_controls = ARRAY_SIZE(ov9740_controls),
};
static struct v4l2_subdev_video_ops ov9740_video_ops = {
.s_stream = ov9740_s_stream,
.s_mbus_fmt = ov9740_s_fmt,
.try_mbus_fmt = ov9740_try_fmt,
.enum_mbus_fmt = ov9740_enum_fmt,
.cropcap = ov9740_cropcap,
.g_crop = ov9740_g_crop,
};
static struct v4l2_subdev_core_ops ov9740_core_ops = {
.g_ctrl = ov9740_g_ctrl,
.s_ctrl = ov9740_s_ctrl,
......@@ -939,15 +948,6 @@ static struct v4l2_subdev_core_ops ov9740_core_ops = {
#endif
};
static struct v4l2_subdev_video_ops ov9740_video_ops = {
.s_stream = ov9740_s_stream,
.s_mbus_fmt = ov9740_s_fmt,
.try_mbus_fmt = ov9740_try_fmt,
.enum_mbus_fmt = ov9740_enum_fmt,
.cropcap = ov9740_cropcap,
.g_crop = ov9740_g_crop,
};
static struct v4l2_subdev_ops ov9740_subdev_ops = {
.core = &ov9740_core_ops,
.video = &ov9740_video_ops,
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册