提交 98916a2f 编写于 作者: F Fabio Estevam 提交者: Shawn Guo

ARM: imx23-olinuxino.dts: Add AUART0 support

Add AUART0 support.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
上级 d9875690
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
......@@ -39,6 +39,12 @@
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
auart0: serial@8006c000 {
pinctrl-names = "default";
pinctrl-0 = <&auart0_2pins_a>;
status = "okay";
};
};
};
};
......@@ -140,6 +140,17 @@
fsl,pull-up = <0>;
};
auart0_2pins_a: auart0-2pins@0 {
reg = <0>;
fsl,pinmux-ids = <
0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */
0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
gpmi_pins_a: gpmi-nand@0 {
reg = <0>;
fsl,pinmux-ids = <
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部