提交 9747e78b 编写于 作者: M Magnus Damm 提交者: Paul Mundt

sh: use in-soc KEYSC on se7724

This patch updates the Solution Engine 7724 board code to use
in-SoC KEYSC resources for the keyboard platform device. Using
the in-SoC key scan controller fixes a crash-during-resume issue.

Without this patch the KEYSC hardware block located in the board
specific FPGA is used together with an external IRQ which is
routed through the FPGA and handled by some board specific demux
code. This board specific FPGA interrupt code does not implement
desc->set_wake() so the enable_irq_wake() call in the sh_keysc
driver will fail at suspend-to-ram time and the disable_irq_wake()
will bomb out when resuming.

Changing the platform data to use the in-SoC KEYSC hardware makes
the se7724 board support code less special which is a good thing.
Also, the board specific KEYSC pin setup code selects in-SoC pin
functions already which makes the current FPGA platform device data
look like a typo.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 f6431732
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
......@@ -238,7 +238,7 @@ static struct platform_device ceu1_device = {
},
};
/* KEYSC */
/* KEYSC in SoC (Needs SW33-2 set to ON) */
static struct sh_keysc_info keysc_info = {
.mode = SH_KEYSC_MODE_1,
.scan_timing = 10,
......@@ -255,12 +255,13 @@ static struct sh_keysc_info keysc_info = {
static struct resource keysc_resources[] = {
[0] = {
.start = 0x1a204000,
.end = 0x1a20400f,
.name = "KEYSC",
.start = 0x044b0000,
.end = 0x044b000f,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ0_KEY,
.start = 79,
.flags = IORESOURCE_IRQ,
},
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册