提交 50d6ec55 编写于 作者: B Ben Hutchings 提交者: David S. Miller

sfc: QT2025C: Add error message for suspected bad SFP+ cables

Some cables have EEPROMs that conflict with the PHY's on-board EEPROM
so it cannot load firmware.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 1a1284ef
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
......@@ -87,8 +87,14 @@ static int qt2025c_wait_heartbeat(struct efx_nic *efx)
old_counter = counter;
else if (counter != old_counter)
break;
if (time_after(jiffies, timeout))
if (time_after(jiffies, timeout)) {
/* Some cables have EEPROMs that conflict with the
* PHY's on-board EEPROM so it cannot load firmware */
EFX_ERR(efx, "If an SFP+ direct attach cable is"
" connected, please check that it complies"
" with the SFP+ specification\n");
return -ETIMEDOUT;
}
msleep(QT2025C_HEARTB_WAIT);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部