提交 40a3a915 编写于 作者: R Ramkrishna Vepa 提交者: David S. Miller

Neterion: New driver: Hardware init & configuration

This patch takes care of Initialization and configuration steps of
Neterion Inc's X3100 Series 10GbE PCIe I/O Virtualized Server Adapter.
- Device Initialization.
- Verification and setting of device config parameters.
- Allocation of Tx FIFO and Rx Ring descriptors (DTR).
- APIs to get various type of hw stats
- APIs to configure RTS (Receive Traffic Steering)

- Changes in this submission -
        - Include vmalloc header without which a compilation error occured
          on sparc64, ppc64 and IA64 plaforms.
	- Fixed compilation warning in register_poll, write32_upper,
          write32_lower and the special write64 functions on ppc64.
        - General cleanup - removed redundant includes and defines.

- Changes in previous submissions -
        - Add readq/writeq implementation for the driver for 32 bit systems -
          reported by Dave Miller.
- Incorporated following comments from Ben Hutchings
        - Start a comment with "/**" to make it a kernel-doc comment.
        - Use prefix, "__vxge" in front of hw functions to make them globally
          unique.
        - Fixed unnecessary clearing members of *channel just before freeing
        - Use backslashes only for macro definitions and not in multi-line
          statements.
        - Used pci_find_capability instead of redefining it.
        - Used device and revision ids that are already in pdev - no need to
          read them again.
        - Used pci_save_state() and pci_restore_state() around resets.
        - Used udelay and mdelay directly instead of wrapper.
        - In __vxge_hw_device_register_poll() reset i to 0 after the
          microsecond delay loop to commence the millisecond delay loop.
        - Corrected spelling "sapper" - should be "swapper"
        - Remove too much vertical whitespace.
        - Replaced magic numbers with appropriate macros
- Incorporated following comments from Andi Kleen [andi@firstfloor.org]
        - Reduced the arguments in functions or refactored them into smaller
        functions.
        - Allocate page sized memories used in slow path with vmalloc.
        - Use asserts where necessary.
        - Use macros instead of magic numbers.
        - Use the pci layer code instead of defining own functions
        - Remove driver wrappers such as xge_hw_device_private_set().
        - Fixed sparse warnings.
Signed-off-by: NSivakumar Subramani <sivakumar.subramani@neterion.com>
Signed-off-by: NRastapur Santosh <santosh.rastapur@neterion.com>
Signed-off-by: NRamkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 66d97fed
master alk-4.19.24 alk-4.19.30 alk-4.19.34 alk-4.19.36 alk-4.19.43 alk-4.19.48 alk-4.19.57 ck-4.19.67 ck-4.19.81 ck-4.19.91 github/fork/deepanshu1422/fix-typo-in-comment github/fork/haosdent/fix-typo linux-next v4.19.91 v4.19.90 v4.19.89 v4.19.88 v4.19.87 v4.19.86 v4.19.85 v4.19.84 v4.19.83 v4.19.82 v4.19.81 v4.19.80 v4.19.79 v4.19.78 v4.19.77 v4.19.76 v4.19.75 v4.19.74 v4.19.73 v4.19.72 v4.19.71 v4.19.70 v4.19.69 v4.19.68 v4.19.67 v4.19.66 v4.19.65 v4.19.64 v4.19.63 v4.19.62 v4.19.61 v4.19.60 v4.19.59 v4.19.58 v4.19.57 v4.19.56 v4.19.55 v4.19.54 v4.19.53 v4.19.52 v4.19.51 v4.19.50 v4.19.49 v4.19.48 v4.19.47 v4.19.46 v4.19.45 v4.19.44 v4.19.43 v4.19.42 v4.19.41 v4.19.40 v4.19.39 v4.19.38 v4.19.37 v4.19.36 v4.19.35 v4.19.34 v4.19.33 v4.19.32 v4.19.31 v4.19.30 v4.19.29 v4.19.28 v4.19.27 v4.19.26 v4.19.25 v4.19.24 v4.19.23 v4.19.22 v4.19.21 v4.19.20 v4.19.19 v4.19.18 v4.19.17 v4.19.16 v4.19.15 v4.19.14 v4.19.13 v4.19.12 v4.19.11 v4.19.10 v4.19.9 v4.19.8 v4.19.7 v4.19.6 v4.19.5 v4.19.4 v4.19.3 v4.19.2 v4.19.1 v4.19 v4.19-rc8 v4.19-rc7 v4.19-rc6 v4.19-rc5 v4.19-rc4 v4.19-rc3 v4.19-rc2 v4.19-rc1 ck-release-21 ck-release-20 ck-release-19.2 ck-release-19.1 ck-release-19 ck-release-18 ck-release-17.2 ck-release-17.1 ck-release-17 ck-release-16 ck-release-15.1 ck-release-15 ck-release-14 ck-release-13.2 ck-release-13 ck-release-12 ck-release-11 ck-release-10 ck-release-9 ck-release-7 alk-release-15 alk-release-14 alk-release-13.2 alk-release-13 alk-release-12 alk-release-11 alk-release-10 alk-release-9 alk-release-7
无相关合并请求
此差异已折叠。
此差异已折叠。
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部