fm10k: do not use CamelCase

Avoid the use of CamelCase for some variable names that previously
slipped through review.
Reported-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NKrishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/fm10k/fm10k_pci.c

@@ -1411,14 +1411,14 @@ static int fm10k_mbx_request_irq_pf(struct fm10k_intfc *interface)
 	}
 
 	/* Enable interrupts w/ no moderation for "other" interrupts */
-	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_PCIeFault), other_itr);
-	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_SwitchUpDown), other_itr);
-	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_SRAM), other_itr);
-	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_MaxHoldTime), other_itr);
-	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_VFLR), other_itr);
+	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_pcie_fault), other_itr);
+	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_switch_up_down), other_itr);
+	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_sram), other_itr);
+	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_max_hold_time), other_itr);
+	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_vflr), other_itr);
 
 	/* Enable interrupts w/ moderation for mailbox */
-	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_Mailbox), mbx_itr);
+	fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_mailbox), mbx_itr);
 
 	/* Enable individual interrupt causes */
 	fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) |

drivers/net/ethernet/intel/fm10k/fm10k_type.h

@@ -388,13 +388,13 @@ struct fm10k_hw;
 #define FM10K_SW_SYSTIME_PULSE(_n)	((_n) + 0x02252)
 
 enum fm10k_int_source {
-	fm10k_int_Mailbox	= 0,
-	fm10k_int_PCIeFault	= 1,
-	fm10k_int_SwitchUpDown	= 2,
-	fm10k_int_SwitchEvent	= 3,
-	fm10k_int_SRAM		= 4,
-	fm10k_int_VFLR		= 5,
-	fm10k_int_MaxHoldTime	= 6,
+	fm10k_int_mailbox		= 0,
+	fm10k_int_pcie_fault		= 1,
+	fm10k_int_switch_up_down	= 2,
+	fm10k_int_switch_event		= 3,
+	fm10k_int_sram			= 4,
+	fm10k_int_vflr			= 5,
+	fm10k_int_max_hold_time		= 6,
 	fm10k_int_sources_max_pf
 };