i40e: fix for flow director counters not wrapping as expected

An errata with GLQF_PCNT causes it to not wrap as expected. This
can cause an error in flow director statistics. This patch resets
affected counters just after reading.
Signed-off-by: NMariusz Stachura <mariusz.stachura@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -599,6 +599,20 @@ static void i40e_stat_update32(struct i40e_hw *hw, u32 reg,
 		*stat = (u32)((new_data + BIT_ULL(32)) - *offset);
 }
 
+/**
+ * i40e_stat_update_and_clear32 - read and clear hw reg, update a 32 bit stat
+ * @hw: ptr to the hardware info
+ * @reg: the hw reg to read and clear
+ * @stat: ptr to the stat
+ **/
+static void i40e_stat_update_and_clear32(struct i40e_hw *hw, u32 reg, u64 *stat)
+{
+	u32 new_data = rd32(hw, reg);
+
+	wr32(hw, reg, 1); /* must write a nonzero value to clear register */
+	*stat += new_data;
+}
+
 /**
  * i40e_update_eth_stats - Update VSI-specific ethernet statistics counters.
  * @vsi: the VSI to be updated
@@ -1040,18 +1054,15 @@ static void i40e_update_pf_stats(struct i40e_pf *pf)
 			   &osd->rx_jabber, &nsd->rx_jabber);
 
 	/* FDIR stats */
-	i40e_stat_update32(hw,
-			   I40E_GLQF_PCNT(I40E_FD_ATR_STAT_IDX(pf->hw.pf_id)),
-			   pf->stat_offsets_loaded,
-			   &osd->fd_atr_match, &nsd->fd_atr_match);
-	i40e_stat_update32(hw,
-			   I40E_GLQF_PCNT(I40E_FD_SB_STAT_IDX(pf->hw.pf_id)),
-			   pf->stat_offsets_loaded,
-			   &osd->fd_sb_match, &nsd->fd_sb_match);
-	i40e_stat_update32(hw,
-		      I40E_GLQF_PCNT(I40E_FD_ATR_TUNNEL_STAT_IDX(pf->hw.pf_id)),
-		      pf->stat_offsets_loaded,
-		      &osd->fd_atr_tunnel_match, &nsd->fd_atr_tunnel_match);
+	i40e_stat_update_and_clear32(hw,
+			I40E_GLQF_PCNT(I40E_FD_ATR_STAT_IDX(hw->pf_id)),
+			&nsd->fd_atr_match);
+	i40e_stat_update_and_clear32(hw,
+			I40E_GLQF_PCNT(I40E_FD_SB_STAT_IDX(hw->pf_id)),
+			&nsd->fd_sb_match);
+	i40e_stat_update_and_clear32(hw,
+			I40E_GLQF_PCNT(I40E_FD_ATR_TUNNEL_STAT_IDX(hw->pf_id)),
+			&nsd->fd_atr_tunnel_match);
 
 	val = rd32(hw, I40E_PRTPM_EEE_STAT);
 	nsd->tx_lpi_status =