Kconfig 38.3 KB
Newer Older
1 2 3 4
#
# Multifunction miscellaneous devices
#

A
Arnd Bergmann 已提交
5 6
if HAS_IOMEM
menu "Multifunction device drivers"
B
Ben Dooks 已提交
7

8 9
config MFD_CORE
	tristate
10
	select IRQ_DOMAIN
11 12
	default n

13 14
config MFD_CS5535
	tristate "AMD CS5535 and CS5536 southbridge core functions"
15
	select MFD_CORE
J
Jean Delvare 已提交
16
	depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
17 18 19
	---help---
	  This is the core driver for CS5535/CS5536 MFD functions.  This is
          necessary for using the board's GPIO and MFGPT functionality.
20

21 22 23
config MFD_AS3711
	bool "AMS AS3711"
	select MFD_CORE
Q
Qiao Zhou 已提交
24 25
	select REGMAP_I2C
	select REGMAP_IRQ
26
	depends on I2C=y
Q
Qiao Zhou 已提交
27
	help
28
	  Support for the AS3711 PMIC from AMS
Q
Qiao Zhou 已提交
29

30 31 32 33 34
config MFD_AS3722
	bool "ams AS3722 Power Management IC"
	select MFD_CORE
	select REGMAP_I2C
	select REGMAP_IRQ
35
	depends on I2C=y && OF
36 37 38 39 40 41
	help
	  The ams AS3722 is a compact system PMU suitable for mobile phones,
	  tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
	  controllers, 11 LDOs, RTC, automatic battery, temperature and
	  over current monitoring, GPIOs, ADC and a watchdog.

42 43 44 45 46 47 48 49 50 51 52 53
config PMIC_ADP5520
	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
	depends on I2C=y
	help
	  Say yes here to add support for Analog Devices AD5520 and ADP5501,
	  Multifunction Power Management IC. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, LEDs, GPIOs and Kepad
	  under the corresponding menus.

config MFD_AAT2870_CORE
	bool "AnalogicTech AAT2870"
Q
Qiao Zhou 已提交
54
	select MFD_CORE
55
	depends on I2C=y && GPIOLIB
Q
Qiao Zhou 已提交
56
	help
57 58 59 60
	  If you say yes here you get support for the AAT2870.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.
Q
Qiao Zhou 已提交
61

M
Matt Porter 已提交
62 63 64 65 66 67 68 69
config MFD_BCM590XX
	tristate "Broadcom BCM590xx PMUs"
	select MFD_CORE
	select REGMAP_I2C
	depends on I2C
	help
	  Support for the BCM590xx PMUs from Broadcom

70 71 72 73 74 75 76 77 78 79 80 81
config MFD_AXP20X
	bool "X-Powers AXP20X"
	select MFD_CORE
	select REGMAP_I2C
	select REGMAP_IRQ
	depends on I2C=y
	help
	  If you say Y here you get support for the X-Powers AXP202 and AXP209.
	  This driver include only the core APIs. You have to select individual
	  components like regulators or the PEK (Power Enable Key) under the
	  corresponding menus.

82
config MFD_CROS_EC
83
	tristate "ChromeOS Embedded Controller"
84
	select MFD_CORE
85 86 87
	help
	  If you say Y here you get support for the ChromeOS Embedded
	  Controller (EC) providing keyboard, battery and power services.
88
	  You also need to enable the driver for the bus you are using. The
89
	  protocol for talking to the EC is defined by the bus driver.
B
Ben Dooks 已提交
90

S
Simon Glass 已提交
91 92 93
config MFD_CROS_EC_I2C
	tristate "ChromeOS Embedded Controller (I2C)"
	depends on MFD_CROS_EC && I2C
B
Ben Dooks 已提交
94

95
	help
S
Simon Glass 已提交
96 97 98 99 100
	  If you say Y here, you get support for talking to the ChromeOS
	  EC through an I2C bus. This uses a simple byte-level protocol with
	  a checksum. Failing accesses will be retried three times to
	  improve reliability.

S
Simon Glass 已提交
101 102
config MFD_CROS_EC_SPI
	tristate "ChromeOS Embedded Controller (SPI)"
T
Thierry Reding 已提交
103
	depends on MFD_CROS_EC && SPI && OF
S
Simon Glass 已提交
104 105 106 107 108 109

	---help---
	  If you say Y here, you get support for talking to the ChromeOS EC
	  through a SPI bus, using a byte-level protocol. Since the EC's
	  response time cannot be guaranteed, we support ignoring
	  'pre-amble' bytes before the response actually starts.
110

S
Samuel Ortiz 已提交
111
config MFD_ASIC3
112
	bool "Compaq ASIC3"
113
	depends on GPIOLIB && ARM
P
Philipp Zabel 已提交
114
	select MFD_CORE
S
Samuel Ortiz 已提交
115 116 117 118
	 ---help---
	  This driver supports the ASIC3 multifunction chip found on many
	  PDAs (mainly iPAQ and HTC based ones)

119 120 121
config PMIC_DA903X
	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	depends on I2C=y
Q
Qiao Zhou 已提交
122
	help
123
	  Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
124 125 126 127 128
	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	  usually found on PXA processors-based platforms. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, voltage regulators,
	  LEDs and battery-charger under the corresponding menus.
Q
Qiao Zhou 已提交
129

130 131
config PMIC_DA9052
	bool
M
Miguel Aguilar 已提交
132 133
	select MFD_CORE

134 135 136 137 138
config MFD_DA9052_SPI
	bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
	select REGMAP_SPI
	select REGMAP_IRQ
	select PMIC_DA9052
139
	depends on SPI_MASTER=y
D
David Brownell 已提交
140
	help
141 142 143 144
	  Support for the Dialog Semiconductor DA9052 PMIC
	  when controlled using SPI. This driver provides common support
	  for accessing the device, additional drivers must be enabled in
	  order to use the functionality of the device.
D
David Brownell 已提交
145

146 147 148 149 150
config MFD_DA9052_I2C
	bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
	select REGMAP_I2C
	select REGMAP_IRQ
	select PMIC_DA9052
151
	depends on I2C=y
152 153 154 155 156
	help
	  Support for the Dialog Semiconductor DA9052 PMIC
	  when controlled using I2C. This driver provides common support
	  for accessing the device, additional drivers must be enabled in
	  order to use the functionality of the device.
B
Ben Dooks 已提交
157

158 159 160 161
config MFD_DA9055
	bool "Dialog Semiconductor DA9055 PMIC Support"
	select REGMAP_I2C
	select REGMAP_IRQ
162
	select MFD_CORE
163
	depends on I2C=y
164
	help
165 166 167 168 169
	  Say yes here for support of Dialog Semiconductor DA9055. This is
	  a Power Management IC. This driver provides common support for
	  accessing the device as well as the I2C interface to the chip itself.
	  Additional drivers must be enabled in order to use the functionality
	  of the device.
170

171 172
	  This driver can be built as a module. If built as a module it will be
	  called "da9055"
173

174 175 176 177 178
config MFD_DA9063
	bool "Dialog Semiconductor DA9063 PMIC Support"
	select MFD_CORE
	select REGMAP_I2C
	select REGMAP_IRQ
179
	depends on I2C=y
180 181 182 183 184 185
	help
	  Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
	  This includes the I2C driver and core APIs.
	  Additional drivers must be enabled in order to use the functionality
	  of the device.

186 187
config MFD_MC13XXX
	tristate
188
	depends on (SPI_MASTER || I2C)
189
	select MFD_CORE
190
	select REGMAP_IRQ
191
	help
192 193 194 195
	  Enable support for the Freescale MC13783 and MC13892 PMICs.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.
196

197 198
config MFD_MC13XXX_SPI
	tristate "Freescale MC13783 and MC13892 SPI interface"
199
	depends on SPI_MASTER
200 201 202 203
	select REGMAP_SPI
	select MFD_MC13XXX
	help
	  Select this if your MC13xxx is connected via an SPI bus.
204

205 206
config MFD_MC13XXX_I2C
	tristate "Freescale MC13892 I2C interface"
207
	depends on I2C
208 209
	select REGMAP_I2C
	select MFD_MC13XXX
210
	help
211
	  Select this if your MC13xxx is connected via an I2C bus.
212

213 214
config HTC_EGPIO
	bool "HTC EGPIO support"
215
	depends on GPIOLIB && ARM
216 217 218 219 220
	help
	    This driver supports the CPLD egpio chip present on
	    several HTC phones.  It provides basic support for input
	    pins, output pins, and irqs.

221 222
config HTC_PASIC3
	tristate "HTC PASIC3 LED/DS1WM chip support"
223
	select MFD_CORE
224 225 226 227 228 229
	help
	  This core driver provides register access for the LED/DS1WM
	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	  HTC Magician devices, respectively. Actual functionality is
	  handled by the leds-pasic3 and ds1wm drivers.

C
Cory Maccarrone 已提交
230 231
config HTC_I2CPLD
	bool "HTC I2C PLD chip support"
232
	depends on I2C=y && GPIOLIB
C
Cory Maccarrone 已提交
233 234 235 236 237 238
	help
	  If you say yes here you get support for the supposed CPLD
	  found on omap850 HTC devices like the HTC Wizard and HTC Herald.
	  This device provides input and output GPIOs through an I2C
	  interface to one or more sub-chips.

239 240
config LPC_ICH
	tristate "Intel ICH LPC"
241
	depends on PCI
242
	select MFD_CORE
243
	help
244 245 246 247
	  The LPC bridge function of the Intel ICH provides support for
	  many functional units. This driver provides needed support for
	  other drivers to control these functions, currently GPIO and
	  watchdog.
248

249 250
config LPC_SCH
	tristate "Intel SCH LPC"
251
	depends on PCI
252 253
	select MFD_CORE
	help
254 255
	  LPC bridge function of the Intel SCH provides support for
	  System Management Bus and General Purpose I/O.
256

257 258 259 260 261 262 263 264 265 266 267 268
config INTEL_SOC_PMIC
	bool "Support for Intel Atom SoC PMIC"
	depends on I2C=y
	select MFD_CORE
	select REGMAP_I2C
	select REGMAP_IRQ
	help
	  Select this option to enable support for the PMIC device
	  on some Intel SoC systems. The PMIC provides ADC, GPIO,
	  thermal, charger and related power management functions
	  on these systems.

269 270 271
config MFD_INTEL_MSIC
	bool "Intel MSIC"
	depends on INTEL_SCU_IPC
272
	select MFD_CORE
273
	help
274 275 276
	  Select this option to enable access to Intel MSIC (Avatele
	  Passage) chip. This chip embeds audio, battery, GPIO, etc.
	  devices used in Intel Medfield platforms.
277

278 279 280 281 282 283 284 285 286 287
config MFD_IPAQ_MICRO
	bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
	depends on SA1100_H3100 || SA1100_H3600
	select MFD_CORE
	help
	  Select this to get support for the Microcontroller found in
	  the Compaq iPAQ handheld computers. This is an Atmel
	  AT90LS8535 microcontroller flashed with a special iPAQ
	  firmware using the custom protocol implemented in this driver.

288 289 290
config MFD_JANZ_CMODIO
	tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
	select MFD_CORE
291
	depends on PCI
292
	help
293 294 295 296
	  This is the core driver for the Janz CMOD-IO PCI MODULbus
	  carrier board. This device is a PCI to MODULbus bridge which may
	  host many different types of MODULbus daughterboards, including
	  CAN and GPIO controllers.
297

298 299
config MFD_JZ4740_ADC
	bool "Janz JZ4740 ADC core"
T
Todd Fischer 已提交
300
	select MFD_CORE
301 302
	select GENERIC_IRQ_CHIP
	depends on MACH_JZ4740
T
Todd Fischer 已提交
303
	help
304 305
	  Say yes here if you want support for the ADC unit in the JZ4740 SoC.
	  This driver is necessary for jz4740-battery and jz4740-hwmon driver.
T
Todd Fischer 已提交
306

K
Kevin Strasser 已提交
307 308 309 310 311 312 313 314 315
config MFD_KEMPLD
	tristate "Kontron module PLD device"
	select MFD_CORE
	help
	  This is the core driver for the PLD (Programmable Logic Device) found
	  on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
	  device may provide functions like watchdog, GPIO, UART and I2C bus.

	  The following modules are supported:
316
		* COMe-bHL6
K
Kevin Strasser 已提交
317 318 319
		* COMe-bIP#
		* COMe-bPC2 (ETXexpress-PC)
		* COMe-bSC# (ETXexpress-SC T#)
320
		* COMe-cBT6
K
Kevin Strasser 已提交
321 322
		* COMe-cCT6
		* COMe-cDC2 (microETXexpress-DC)
323
		* COMe-cHL6
K
Kevin Strasser 已提交
324
		* COMe-cPC2 (microETXexpress-PC)
325
		* COMe-mBT10
K
Kevin Strasser 已提交
326
		* COMe-mCT10
327
		* COMe-mTT10 (nanoETXexpress-TT)
K
Kevin Strasser 已提交
328 329 330 331 332
		* ETX-OH

	  This driver can also be built as a module. If so, the module
	  will be called kempld-core.

333 334
config MFD_88PM800
	tristate "Marvell 88PM800"
335
	depends on I2C=y
336
	select REGMAP_I2C
337 338
	select REGMAP_IRQ
	select MFD_CORE
339
	help
340 341 342 343
	  This supports for Marvell 88PM800 Power Management IC.
	  This includes the I2C driver and the core APIs _only_, you have to
	  select individual components like voltage regulators, RTC and
	  battery-charger under the corresponding menus.
344

345 346
config MFD_88PM805
	tristate "Marvell 88PM805"
347
	depends on I2C=y
348
	select REGMAP_I2C
349 350
	select REGMAP_IRQ
	select MFD_CORE
351
	help
352 353 354 355
	  This supports for Marvell 88PM805 Power Management IC. This includes
	  the I2C driver and the core APIs _only_, you have to select individual
	  components like codec device, headset/Mic device under the
	  corresponding menus.
356

357 358
config MFD_88PM860X
	bool "Marvell 88PM8606/88PM8607"
359
	depends on I2C=y
360 361 362 363 364 365 366
	select REGMAP_I2C
	select MFD_CORE
	help
	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
	  This includes the I2C driver and the core APIs _only_, you have to
	  select individual components like voltage regulators, RTC and
	  battery-charger under the corresponding menus.
367

368
config MFD_MAX14577
369
	bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
370 371 372
	depends on I2C=y
	select MFD_CORE
	select REGMAP_I2C
373
	select REGMAP_IRQ
374 375
	select IRQ_DOMAIN
	help
376 377
	  Say yes here to add support for Maxim Semiconductor MAX14577 and
	  MAX77836 Micro-USB ICs with battery charger.
378 379 380 381
	  This driver provides common support for accessing the device;
	  additional drivers must be enabled in order to use the functionality
	  of the device.

382
config MFD_MAX77686
383
	bool "Maxim Semiconductor MAX77686/802 PMIC Support"
384
	depends on I2C=y
385
	select MFD_CORE
386
	select REGMAP_I2C
387
	select REGMAP_IRQ
388
	select IRQ_DOMAIN
389
	help
390 391
	  Say yes here to add support for Maxim Semiconductor MAX77686 and
	  MAX77802 which are Power Management IC with an RTC on chip.
392 393 394
	  This driver provides common support for accessing the device;
	  additional drivers must be enabled in order to use the functionality
	  of the device.
395

396 397
config MFD_MAX77693
	bool "Maxim Semiconductor MAX77693 PMIC Support"
398
	depends on I2C=y
399
	select MFD_CORE
400
	select REGMAP_I2C
401
	select REGMAP_IRQ
402
	help
403
	  Say yes here to add support for Maxim Semiconductor MAX77693.
404 405 406 407 408
	  This is a companion Power Management IC with Flash, Haptic, Charger,
	  and MUIC(Micro USB Interface Controller) controls on chip.
	  This driver provides common support for accessing the device;
	  additional drivers must be enabled in order to use the functionality
	  of the device.
409

410 411
config MFD_MAX8907
	tristate "Maxim Semiconductor MAX8907 PMIC Support"
412
	select MFD_CORE
413
	depends on I2C=y
414
	select REGMAP_I2C
415
	select REGMAP_IRQ
416
	help
417
	  Say yes here to add support for Maxim Semiconductor MAX8907. This is
418 419 420
	  a Power Management IC. This driver provides common support for
	  accessing the device; additional drivers must be enabled in order
	  to use the functionality of the device.
421

422 423
config MFD_MAX8925
	bool "Maxim Semiconductor MAX8925 PMIC Support"
424
	depends on I2C=y
425
	select MFD_CORE
426
	help
427
	  Say yes here to add support for Maxim Semiconductor MAX8925. This is
428 429 430
	  a Power Management IC. This driver provides common support for
	  accessing the device, additional drivers must be enabled in order
	  to use the functionality of the device.
431

432 433
config MFD_MAX8997
	bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
434
	depends on I2C=y
435
	select MFD_CORE
436
	select IRQ_DOMAIN
D
David Brownell 已提交
437
	help
438
	  Say yes here to add support for Maxim Semiconductor MAX8997/8966.
439 440 441 442 443
	  This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
	  MUIC controls on chip.
	  This driver provides common support for accessing the device;
	  additional drivers must be enabled in order to use the functionality
	  of the device.
D
David Brownell 已提交
444

445 446
config MFD_MAX8998
	bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
447
	depends on I2C=y
448
	select MFD_CORE
449
	select IRQ_DOMAIN
K
Keerthy 已提交
450
	help
451
	  Say yes here to add support for Maxim Semiconductor MAX8998 and
452 453 454 455
	  National Semiconductor LP3974. This is a Power Management IC.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the functionality
	  of the device.
K
Keerthy 已提交
456

457 458
config EZX_PCAP
	bool "Motorola EZXPCAP Support"
459
	depends on SPI_MASTER
460
	help
461 462
	  This enables the PCAP ASIC present on EZX Phones. This is
	  needed for MMC, TouchScreen, Sound, USB, etc..
463

464 465
config MFD_VIPERBOARD
        tristate "Nano River Technologies Viperboard"
466
	select MFD_CORE
467
	depends on USB
468
	default n
469 470 471 472 473 474 475 476
	help
	  Say yes here if you want support for Nano River Technologies
	  Viperboard.
	  There are mfd cell drivers available for i2c master, adc and
	  both gpios found on the board. The spi part does not yet
	  have a driver.
	  You need to select the mfd cell drivers separately.
	  The drivers do not support all features the board exposes.
477

478
config MFD_RETU
A
Aaro Koskinen 已提交
479
	tristate "Nokia Retu and Tahvo multi-function device"
480
	select MFD_CORE
481
	depends on I2C
482
	select REGMAP_IRQ
483
	help
A
Aaro Koskinen 已提交
484 485
	  Retu and Tahvo are a multi-function devices found on Nokia
	  Internet Tablets (770, N800 and N810).
486

487 488 489 490
config MFD_PCF50633
	tristate "NXP PCF50633"
	depends on I2C
	select REGMAP_I2C
491
	help
492 493 494 495
	  Say yes here if you have NXP PCF50633 chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.
496

497 498 499
config PCF50633_ADC
	tristate "NXP PCF50633 ADC"
	depends on MFD_PCF50633
500
	help
501 502
	 Say yes here if you want to include support for ADC in the
	 NXP PCF50633 chip.
503

504 505 506
config PCF50633_GPIO
	tristate "NXP PCF50633 GPIO"
	depends on MFD_PCF50633
507
	help
508 509
	 Say yes here if you want to include support GPIO for pins on
	 the PCF50633 chip.
510

511 512 513 514
config UCB1400_CORE
	tristate "Philips UCB1400 Core driver"
	depends on AC97_BUS
	depends on GPIOLIB
515
	help
516 517
	  This enables support for the Philips UCB1400 core functions.
	  The UCB1400 is an AC97 audio codec.
518

519 520
	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_core.
521

522 523
config MFD_PM8XXX
	tristate
524

525 526
config MFD_PM8921_CORE
	tristate "Qualcomm PM8921 PMIC chip"
527
	depends on (ARM || HEXAGON)
528
	select IRQ_DOMAIN
529
	select MFD_CORE
530
	select MFD_PM8XXX
S
Stephen Boyd 已提交
531
	select REGMAP
532
	help
533 534
	  If you say yes to this option, support will be included for the
	  built-in PM8921 PMIC chip.
535

536 537 538 539 540 541 542 543 544
	  This is required if your board has a PM8921 and uses its features,
	  such as: MPPs, GPIOs, regulators, interrupts, and PWM.

	  Say M here if you want to include support for PM8921 chip as a module.
	  This will build a module called "pm8921-core".

config MFD_RDC321X
	tristate "RDC R-321x southbridge"
	select MFD_CORE
545
	depends on PCI
546 547 548 549 550 551 552
	help
	  Say yes here if you want to have support for the RDC R-321x SoC
	  southbridge which provides access to GPIOs and Watchdog using the
	  southbridge PCI device configuration space.

config MFD_RTSX_PCI
	tristate "Realtek PCI-E card reader"
553
	depends on PCI
554 555 556 557 558 559 560
	select MFD_CORE
	help
	  This supports for Realtek PCI-Express card reader including rts5209,
	  rts5229, rtl8411, etc. Realtek card reader supports access to many
	  types of memory cards, such as Memory Stick, Memory Stick Pro,
	  Secure Digital and MultiMediaCard.

561 562 563 564 565 566 567 568 569 570
config MFD_RTSX_USB
	tristate "Realtek USB card reader"
	depends on USB
	select MFD_CORE
	help
	  Select this option to get support for Realtek USB 2.0 card readers
	  including RTS5129, RTS5139, RTS5179 and RTS5170.
	  Realtek card reader supports access to many types of memory cards,
	  such as Memory Stick Pro, Secure Digital and MultiMediaCard.

571 572
config MFD_RC5T583
	bool "Ricoh RC5T583 Power Management system device"
573
	depends on I2C=y
574 575 576 577 578 579 580 581 582 583 584 585 586
	select MFD_CORE
	select REGMAP_I2C
	help
	  Select this option to get support for the RICOH583 Power
	  Management system device.
	  This driver provides common support for accessing the device
	  through i2c interface. The device supports multiple sub-devices
	  like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
	  Additional drivers must be enabled in order to use the
	  different functionality of the device.

config MFD_SEC_CORE
	bool "SAMSUNG Electronics PMIC Series Support"
587
	depends on I2C=y
588 589 590
	select MFD_CORE
	select REGMAP_I2C
	select REGMAP_IRQ
591
	select REGULATOR
592 593 594 595 596 597
	help
	 Support for the Samsung Electronics MFD series.
	 This driver provides common support for accessing the device,
	 additional drivers must be enabled in order to use the functionality
	 of the device

598 599 600 601 602 603 604 605 606 607 608 609 610
config MFD_SI476X_CORE
	tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
	depends on I2C
	select MFD_CORE
	select REGMAP_I2C
	help
	  This is the core driver for the SI476x series of AM/FM
	  radio. This MFD driver connects the radio-si476x V4L2 module
	  and the si476x audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called si476x-core.

611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627
config MFD_SM501
	tristate "Silicon Motion SM501"
	 ---help---
	  This is the core driver for the Silicon Motion SM501 multimedia
	  companion chip. This device is a multifunction device which may
	  provide numerous interfaces including USB host controller, USB gadget,
	  asynchronous serial ports, audio functions, and a dual display video
	  interface. The device may be connected by PCI or local bus with
	  varying functions enabled.

config MFD_SM501_GPIO
	bool "Export GPIO via GPIO layer"
	depends on MFD_SM501 && GPIOLIB
	 ---help---
	 This option uses the gpio library layer to export the 64 GPIO
	 lines on the SM501. The platform data is used to supply the
	 base number for the first GPIO line to register.
628

629
config MFD_SMSC
630
       bool "SMSC ECE1099 series chips"
631
       depends on I2C=y
632 633 634 635 636 637 638 639 640
       select MFD_CORE
       select REGMAP_I2C
       help
        If you say yes here you get support for the
        ece1099 chips from SMSC.

        To compile this driver as a module, choose M here: the
        module will be called smsc.

641 642 643
config ABX500_CORE
	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
	default y if ARCH_U300 || ARCH_U8500
644
	help
645 646 647 648 649
	  Say yes here if you have the ABX500 Mixed Signal IC family
	  chips. This core driver expose register access functions.
	  Functionality specific drivers using these functions can
	  remain unchanged when IC changes. Binding of the functions to
	  actual register access is done by the IC core driver.
650

651 652
config AB3100_CORE
	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
653
	depends on I2C=y && ABX500_CORE
654
	select MFD_CORE
655
	default y if ARCH_U300
656
	help
657 658 659 660 661 662 663 664
	  Select this to enable the AB3100 Mixed Signal IC core
	  functionality. This connects to a AB3100 on the I2C bus
	  and expose a number of symbols needed for dependent devices
	  to read and write registers and subscribe to events from
	  this multi-functional IC. This is needed to use other features
	  of the AB3100 such as battery-backed RTC, charging control,
	  LEDs, vibrator, system power and temperature, power management
	  and ALSA sound.
665

666 667 668 669
config AB3100_OTP
	tristate "ST-Ericsson AB3100 OTP functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
670
	help
671 672 673
	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	  programmable memory) support. This exposes a sysfs file to read
	  out OTP values.
674

675 676
config AB8500_CORE
	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
677
	depends on ABX500_CORE && MFD_DB8500_PRCMU
678
	select POWER_SUPPLY
A
Ashish Jangam 已提交
679
	select MFD_CORE
680 681 682 683 684 685 686
	select IRQ_DOMAIN
	help
	  Select this option to enable access to AB8500 power management
	  chip. This connects to U8500 either on the SSP/SPI bus (deprecated
	  since hardware version v1.0) or the I2C bus via PRCMU. It also adds
	  the irq_chip parts for handling the Mixed Signal chip events.
	  This chip embeds various other multimedia funtionalities as well.
A
Ashish Jangam 已提交
687

688 689
config AB8500_DEBUG
       bool "Enable debug info via debugfs"
690
       depends on AB8500_GPADC && DEBUG_FS
691 692 693 694 695 696 697 698 699
       default y if DEBUG_FS
       help
         Select this option if you want debug information using the debug
         filesystem, debugfs.

config AB8500_GPADC
	bool "ST-Ericsson AB8500 GPADC driver"
	depends on AB8500_CORE && REGULATOR_AB8500
	default y
700
	help
701
	  AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
702

703 704 705 706
config MFD_DB8500_PRCMU
	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
	depends on UX500_SOC_DB8500
	select MFD_CORE
A
Ashish Jangam 已提交
707
	help
708 709 710 711
	  Select this option to enable support for the DB8500 Power Reset
	  and Control Management Unit. This is basically an autonomous
	  system controller running an XP70 microprocessor, which is accessed
	  through a register map.
A
Ashish Jangam 已提交
712

713 714
config MFD_STMPE
	bool "STMicroelectronics STMPE"
715
	depends on (I2C=y || SPI_MASTER=y)
716
	depends on OF
A
Ashish Jangam 已提交
717 718
	select MFD_CORE
	help
719 720
	  Support for the STMPE family of I/O Expanders from
	  STMicroelectronics.
A
Ashish Jangam 已提交
721

722
	  Currently supported devices are:
A
Ashish Jangam 已提交
723

724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741
		STMPE811: GPIO, Touchscreen
		STMPE1601: GPIO, Keypad
		STMPE1801: GPIO, Keypad
		STMPE2401: GPIO, Keypad
		STMPE2403: GPIO, Keypad

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the functionality
	  of the device.  Currently available sub drivers are:

		GPIO: stmpe-gpio
		Keypad: stmpe-keypad
		Touchscreen: stmpe-ts

menu "STMicroelectronics STMPE Interface Drivers"
depends on MFD_STMPE

config STMPE_I2C
M
Masanari Iida 已提交
742
	bool "STMicroelectronics STMPE I2C Interface"
743
	depends on I2C=y
744
	default y
745
	help
746
	  This is used to enable I2C interface of STMPE
747

748
config STMPE_SPI
M
Masanari Iida 已提交
749
	bool "STMicroelectronics STMPE SPI Interface"
750
	depends on SPI_MASTER
M
Milo Kim 已提交
751
	help
752 753
	  This is used to enable SPI interface of STMPE
endmenu
M
Milo Kim 已提交
754

755 756
config MFD_STA2X11
	bool "STMicroelectronics STA2X11"
757
	depends on STA2X11
J
Jonghwa Lee 已提交
758
	select MFD_CORE
759 760
	select REGMAP_MMIO

761 762 763 764 765 766 767 768
config MFD_SUN6I_PRCM
	bool "Allwinner A31 PRCM controller"
	depends on ARCH_SUNXI
	select MFD_CORE
	help
	  Support for the PRCM (Power/Reset/Clock Management) unit available
	  in A31 SoC.

769 770 771
config MFD_SYSCON
	bool "System Controller Register R/W Based on Regmap"
	select REGMAP_MMIO
J
Jonghwa Lee 已提交
772
	help
773 774
	  Select this option to enable accessing system control registers
	  via regmap.
J
Jonghwa Lee 已提交
775

776 777
config MFD_DAVINCI_VOICECODEC
	tristate
C
Chanwoo Choi 已提交
778
	select MFD_CORE
779
	select REGMAP_MMIO
C
Chanwoo Choi 已提交
780

781 782
config MFD_TI_AM335X_TSCADC
	tristate "TI ADC / Touch Screen chip support"
G
Gyungoh Yoo 已提交
783
	select MFD_CORE
784 785
	select REGMAP
	select REGMAP_MMIO
G
Gyungoh Yoo 已提交
786
	help
787 788 789 790
	  If you say yes here you get support for Texas Instruments series
	  of Touch Screen /ADC chips.
	  To compile this driver as a module, choose M here: the
	  module will be called ti_am335x_tscadc.
G
Gyungoh Yoo 已提交
791

792 793 794
config MFD_DM355EVM_MSP
	bool "TI DaVinci DM355 EVM microcontroller"
	depends on I2C=y && MACH_DAVINCI_DM355_EVM
H
Haojian Zhuang 已提交
795
	help
796 797 798
	  This driver supports the MSP430 microcontroller used on these
	  boards.  MSP430 firmware manages resets and power sequencing,
	  inputs from buttons and the IR remote, LEDs, an RTC, and more.
H
Haojian Zhuang 已提交
799

M
Milo Kim 已提交
800 801 802 803 804 805 806 807 808 809 810
config MFD_LP3943
	tristate "TI/National Semiconductor LP3943 MFD Driver"
	depends on I2C
	select MFD_CORE
	select REGMAP_I2C
	help
	  Support for the TI/National Semiconductor LP3943.
	  This driver consists of GPIO and PWM drivers.
	  With these functionalities, it can be used for LED string control or
	  general usage such like a GPIO controller and a PWM controller.

811 812
config MFD_LP8788
	bool "TI LP8788 Power Management Unit Driver"
813
	depends on I2C=y
M
MyungJoo Ham 已提交
814
	select MFD_CORE
815
	select REGMAP_I2C
816
	select IRQ_DOMAIN
M
MyungJoo Ham 已提交
817
	help
818 819
	  TI LP8788 PMU supports regulators, battery charger, RTC,
	  ADC, backlight driver and current sinks.
M
MyungJoo Ham 已提交
820

821 822 823 824
config MFD_OMAP_USB_HOST
	bool "TI OMAP USBHS core and TLL driver"
	depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
	default y
825
	help
826 827 828
	  This is the core driver for the OAMP EHCI and OHCI drivers.
	  This MFD driver does the required setup functionalities for
	  OMAP USB Host drivers.
829

830 831
config MFD_PALMAS
	bool "TI Palmas series chips"
S
Sangbeom Kim 已提交
832 833
	select MFD_CORE
	select REGMAP_I2C
S
Sangbeom Kim 已提交
834
	select REGMAP_IRQ
835
	depends on I2C=y
S
Sangbeom Kim 已提交
836
	help
837 838
	  If you say yes here you get support for the Palmas
	  series of PMIC chips from Texas Instruments.
S
Sangbeom Kim 已提交
839

840 841 842 843
config TPS6105X
	tristate "TI TPS61050/61052 Boost Converters"
	depends on I2C
	select REGULATOR
M
Mark Brown 已提交
844
	select MFD_CORE
845
	select REGULATOR_FIXED_VOLTAGE
M
Mark Brown 已提交
846
	help
847 848 849 850
	  This option enables a driver for the TP61050/TPS61052
	  high-power "white LED driver". This boost converter is
	  sometimes used for other things than white LEDs, and
	  also contains a GPIO pin.
M
Mark Brown 已提交
851

852 853 854 855
config TPS65010
	tristate "TI TPS6501x Power Management chips"
	depends on I2C && GPIOLIB
	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
M
Mark Brown 已提交
856
	help
857 858 859 860
	  If you say yes here you get support for the TPS6501x series of
	  Power Management chips.  These include voltage regulators,
	  lithium ion/polymer battery charging, and other features that
	  are often used in portable devices like cell phones and cameras.
M
Mark Brown 已提交
861

862 863 864 865 866
	  This driver can also be built as a module.  If so, the module
	  will be called tps65010.

config TPS6507X
	tristate "TI TPS6507x Power Management / Touch Screen chips"
M
Mark Brown 已提交
867
	select MFD_CORE
868
	depends on I2C
M
Mark Brown 已提交
869
	help
870 871 872 873 874 875
	  If you say yes here you get support for the TPS6507x series of
	  Power Management / Touch Screen chips.  These include voltage
	  regulators, lithium ion/polymer battery charging, touch screen
	  and other features that are often used in portable devices.
	  This driver can also be built as a module.  If so, the module
	  will be called tps6507x.
M
Mark Brown 已提交
876

877 878 879 880 881
config TPS65911_COMPARATOR
	tristate

config MFD_TPS65090
	bool "TI TPS65090 Power Management chips"
882
	depends on I2C=y
M
Mark Brown 已提交
883
	select MFD_CORE
884 885
	select REGMAP_I2C
	select REGMAP_IRQ
M
Mark Brown 已提交
886
	help
887 888 889 890 891
	  If you say yes here you get support for the TPS65090 series of
	  Power Management chips.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.
M
Mark Brown 已提交
892

893 894
config MFD_TPS65217
	tristate "TI TPS65217 Power Management / White LED chips"
895
	depends on I2C
M
Mark Brown 已提交
896
	select MFD_CORE
M
Mark Brown 已提交
897
	select REGMAP_I2C
898
	help
899 900 901 902 903
	  If you say yes here you get support for the TPS65217 series of
	  Power Management / White LED chips.
	  These include voltage regulators, lithium ion/polymer battery
	  charger, wled and other features that are often used in portable
	  devices.
904

905 906
	  This driver can also be built as a module.  If so, the module
	  will be called tps65217.
907

908 909 910 911 912
config MFD_TPS65218
	tristate "TI TPS65218 Power Management chips"
	depends on I2C
	select MFD_CORE
	select REGMAP_I2C
913
	select REGMAP_IRQ
914 915 916 917 918 919 920 921 922 923
	help
	  If you say yes here you get support for the TPS65218 series of
	  Power Management chips.
	  These include voltage regulators, gpio and other features
	  that are often used in portable devices. Only regulator
	  component is currently supported.

	  This driver can also be built as a module.  If so, the module
	  will be called tps65218.

924 925
config MFD_TPS6586X
	bool "TI TPS6586x Power Management chips"
926
	depends on I2C=y
M
Mark Brown 已提交
927
	select MFD_CORE
928
	select REGMAP_I2C
M
Mark Brown 已提交
929
	help
930 931 932 933 934
	  If you say yes here you get support for the TPS6586X series of
	  Power Management chips.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.
M
Mark Brown 已提交
935

936 937
	  This driver can also be built as a module.  If so, the module
	  will be called tps6586x.
938

939 940
config MFD_TPS65910
	bool "TI TPS65910 Power Management chip"
941
	depends on I2C=y && GPIOLIB
M
Mark Brown 已提交
942
	select MFD_CORE
943
	select REGMAP_I2C
944
	select REGMAP_IRQ
M
Mark Brown 已提交
945
	select IRQ_DOMAIN
M
Mark Brown 已提交
946
	help
947 948
	  if you say yes here you get support for the TPS65910 series of
	  Power Management chips.
M
Mark Brown 已提交
949

950 951 952
config MFD_TPS65912
	bool "TI TPS65912 Power Management chip"
	depends on GPIOLIB
D
David Rientjes 已提交
953
	select MFD_CORE
M
Mark Brown 已提交
954
	help
955 956
	  If you say yes here you get support for the TPS65912 series of
	  PM chips.
M
Mark Brown 已提交
957

958 959 960 961
config MFD_TPS65912_I2C
	bool "TI TPS65912 Power Management chip with I2C"
	select MFD_CORE
	select MFD_TPS65912
962
	depends on I2C=y && GPIOLIB
963 964 965
	help
	  If you say yes here you get support for the TPS65912 series of
	  PM chips with I2C interface.
M
Mark Brown 已提交
966

967 968 969 970
config MFD_TPS65912_SPI
	bool "TI TPS65912 Power Management chip with SPI"
	select MFD_CORE
	select MFD_TPS65912
971
	depends on SPI_MASTER && GPIOLIB
972
	help
973 974
	  If you say yes here you get support for the TPS65912 series of
	  PM chips with SPI interface.
975

976 977
config MFD_TPS80031
	bool "TI TPS80031/TPS80032 Power Management chips"
978
	depends on I2C=y
M
Mark Brown 已提交
979
	select MFD_CORE
980
	select REGMAP_I2C
981
	select REGMAP_IRQ
M
Mark Brown 已提交
982
	help
983 984 985 986 987 988
	  If you say yes here you get support for the Texas Instruments
	  TPS80031/ TPS80032 Fully Integrated Power Management with Power
	  Path and Battery Charger. The device provides five configurable
	  step-down converters, 11 general purpose LDOs, USB OTG Module,
	  ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
	  Power Path from USB, 32K clock generator.
M
Mark Brown 已提交
989

990 991
config TWL4030_CORE
	bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
992
	depends on I2C=y
993
	select IRQ_DOMAIN
994
	select REGMAP_I2C
B
Balaji Rao 已提交
995
	help
996
	  Say yes here if you have TWL4030 / TWL6030 family chip on your board.
B
Balaji Rao 已提交
997 998 999 1000
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

1001 1002 1003 1004
	  These multi-function chips are found on many OMAP2 and OMAP3
	  boards, providing power management, RTC, GPIO, keypad, a
	  high speed USB OTG transceiver, an audio codec (on most
	  versions) and many other features.
1005

1006 1007 1008
config TWL4030_POWER
	bool "TI TWL4030 power resources"
	depends on TWL4030_CORE && ARM
M
Marc Reilly 已提交
1009
	help
1010 1011 1012 1013
	  Say yes here if you want to use the power resources on the
	  TWL4030 family chips.  Most of these resources are regulators,
	  which have a separate driver; some are control signals, such
	  as clock request handshaking.
M
Marc Reilly 已提交
1014

1015 1016 1017
	  This driver uses board-specific data to initialize the resources
	  and load scripts controlling which resources are switched off/on
	  or reset when a sleep, wakeup or warm reset event occurs.
1018

1019 1020
config MFD_TWL4030_AUDIO
	bool "TI TWL4030 Audio"
1021
	depends on TWL4030_CORE
1022
	select MFD_CORE
1023
	default n
D
Daniel Ribeiro 已提交
1024

1025 1026
config TWL6040_CORE
	bool "TI TWL6040 audio codec"
1027
	depends on I2C=y
R
Rabin Vincent 已提交
1028
	select MFD_CORE
1029 1030 1031
	select REGMAP_I2C
	select REGMAP_IRQ
	default n
S
Srinidhi Kasagar 已提交
1032
	help
1033 1034 1035 1036 1037
	  Say yes here if you want support for Texas Instruments TWL6040 audio
	  codec.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device (audio, vibra).
A
Arun Murthy 已提交
1038

1039 1040 1041
config MENELAUS
	bool "TI TWL92330/Menelaus PM chip"
	depends on I2C=y && ARCH_OMAP2
A
Arun Murthy 已提交
1042
	help
1043 1044 1045 1046 1047
	  If you say yes here you get support for the Texas Instruments
	  TWL92330/Menelaus Power Management chip. This include voltage
	  regulators, Dual slot memory card transceivers, real-time clock
	  and other features that are often used in portable devices like
	  cell phones and PDAs.
M
Mattias Wallin 已提交
1048

1049 1050
config MFD_WL1273_CORE
	tristate "TI WL1273 FM radio"
1051
	depends on I2C
1052
	select MFD_CORE
1053
	default n
1054
	help
1055 1056 1057
	  This is the core driver for the TI WL1273 FM radio. This MFD
	  driver connects the radio-wl1273 V4L2 module and the wl1273
	  audio codec.
1058

1059 1060 1061
config MFD_LM3533
	tristate "TI/National Semiconductor LM3533 Lighting Power chip"
	depends on I2C
1062
	select MFD_CORE
1063 1064 1065 1066 1067 1068 1069 1070
	select REGMAP_I2C
	help
	  Say yes here to enable support for National Semiconductor / TI
	  LM3533 Lighting Power chips.

	  This driver provides common support for accessing the device;
	  additional drivers must be enabled in order to use the LED,
	  backlight or ambient-light-sensor functionality of the device.
1071

1072
config MFD_TIMBERDALE
1073
	tristate "Timberdale FPGA"
1074
	select MFD_CORE
J
Jean Delvare 已提交
1075
	depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST)
1076 1077 1078 1079 1080 1081
	---help---
	This is the core driver for the timberdale FPGA. This device is a
	multifunction device which exposes numerous platform devices.

	The timberdale FPGA can be found on the Intel Atom development board
	for in-vehicle infontainment, called Russellville.
1082

1083 1084
config MFD_TC3589X
	bool "Toshiba TC35892 and variants"
1085
	depends on I2C=y
1086 1087
	select MFD_CORE
	help
1088
	  Support for the Toshiba TC35892 and variants I/O Expander.
1089

1090 1091 1092
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.
1093

1094 1095 1096 1097 1098 1099
config MFD_TMIO
	bool
	default n

config MFD_T7L66XB
	bool "Toshiba T7L66XB"
1100
	depends on ARM && HAVE_CLK
1101
	select MFD_CORE
1102
	select MFD_TMIO
1103
	help
1104
	  Support for Toshiba Mobile IO Controller T7L66XB
1105

1106 1107 1108
config MFD_TC6387XB
	bool "Toshiba TC6387XB"
	depends on ARM && HAVE_CLK
1109
	select MFD_CORE
1110
	select MFD_TMIO
1111
	help
1112
	  Support for Toshiba Mobile IO Controller TC6387XB
1113

1114 1115 1116 1117
config MFD_TC6393XB
	bool "Toshiba TC6393XB"
	depends on ARM && HAVE_CLK
	select GPIOLIB
L
Lars-Peter Clausen 已提交
1118
	select MFD_CORE
1119
	select MFD_TMIO
L
Lars-Peter Clausen 已提交
1120
	help
1121
	  Support for Toshiba Mobile IO Controller TC6393XB
L
Lars-Peter Clausen 已提交
1122

1123
config MFD_VX855
1124
	tristate "VIA VX855/VX875 integrated south bridge"
1125
	depends on PCI
1126 1127 1128 1129 1130 1131
	select MFD_CORE
	help
	  Say yes here to enable support for various functions of the
	  VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
	  and/or vx855_gpio drivers for this to do anything useful.

1132 1133 1134
config MFD_ARIZONA
	select REGMAP
	select REGMAP_IRQ
1135
	select MFD_CORE
1136
	bool
1137

1138 1139 1140
config MFD_ARIZONA_I2C
	tristate "Wolfson Microelectronics Arizona platform with I2C"
	select MFD_ARIZONA
1141
	select MFD_CORE
1142
	select REGMAP_I2C
1143
	depends on I2C
1144
	help
1145 1146
	  Support for the Wolfson Microelectronics Arizona platform audio SoC
	  core functionality controlled via I2C.
1147

1148 1149 1150
config MFD_ARIZONA_SPI
	tristate "Wolfson Microelectronics Arizona platform with SPI"
	select MFD_ARIZONA
V
Venu Byravarasu 已提交
1151
	select MFD_CORE
1152
	select REGMAP_SPI
1153
	depends on SPI_MASTER
V
Venu Byravarasu 已提交
1154
	help
1155 1156
	  Support for the Wolfson Microelectronics Arizona platform audio SoC
	  core functionality controlled via I2C.
V
Venu Byravarasu 已提交
1157

1158 1159 1160
config MFD_WM5102
	bool "Wolfson Microelectronics WM5102"
	depends on MFD_ARIZONA
J
Jin Park 已提交
1161
	help
1162
	  Support for Wolfson Microelectronics WM5102 low power audio SoC
J
Jin Park 已提交
1163

1164 1165 1166
config MFD_WM5110
	bool "Wolfson Microelectronics WM5110"
	depends on MFD_ARIZONA
M
Mika Westerberg 已提交
1167
	help
1168
	  Support for Wolfson Microelectronics WM5110 low power audio SoC
M
Mika Westerberg 已提交
1169

1170
config MFD_WM8997
1171
	bool "Wolfson Microelectronics WM8997"
1172 1173 1174 1175
	depends on MFD_ARIZONA
	help
	  Support for Wolfson Microelectronics WM8997 low power audio SoC

1176 1177
config MFD_WM8400
	bool "Wolfson Microelectronics WM8400"
1178
	select MFD_CORE
1179
	depends on I2C=y
1180 1181
	select REGMAP_I2C
	help
1182 1183 1184 1185
	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
	  CODEC.  This driver provides common support for accessing
	  the device, additional drivers must be enabled in order to use
	  the functionality of the device.
1186

1187 1188
config MFD_WM831X
	bool
1189

1190 1191
config MFD_WM831X_I2C
	bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
1192
	select MFD_CORE
1193
	select MFD_WM831X
1194
	select REGMAP_I2C
1195
	select IRQ_DOMAIN
1196
	depends on I2C=y
1197
	help
1198 1199 1200 1201
	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
	  when controlled using I2C.  This driver provides common support
	  for accessing the device, additional drivers must be enabled in
	  order to use the functionality of the device.
1202

1203 1204
config MFD_WM831X_SPI
	bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
L
Lars Poeschel 已提交
1205
	select MFD_CORE
1206 1207 1208
	select MFD_WM831X
	select REGMAP_SPI
	select IRQ_DOMAIN
1209
	depends on SPI_MASTER
L
Lars Poeschel 已提交
1210
	help
1211 1212 1213 1214
	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
	  when controlled using SPI.  This driver provides common support
	  for accessing the device, additional drivers must be enabled in
	  order to use the functionality of the device.
L
Lars Poeschel 已提交
1215

1216 1217 1218 1219 1220 1221
config MFD_WM8350
	bool

config MFD_WM8350_I2C
	bool "Wolfson Microelectronics WM8350 with I2C"
	select MFD_WM8350
1222
	depends on I2C=y
A
Aaro Koskinen 已提交
1223
	help
1224 1225 1226 1227 1228
	  The WM8350 is an integrated audio and power management
	  subsystem with watchdog and RTC functionality for embedded
	  systems.  This option enables core support for the WM8350 with
	  I2C as the control interface.  Additional options must be
	  selected to enable support for the functionality of the chip.
A
Aaro Koskinen 已提交
1229

1230 1231
config MFD_WM8994
	bool "Wolfson Microelectronics WM8994"
1232 1233 1234
	select MFD_CORE
	select REGMAP_I2C
	select REGMAP_IRQ
1235
	depends on I2C=y
1236
	help
1237 1238 1239 1240 1241 1242
	  The WM8994 is a highly integrated hi-fi CODEC designed for
	  smartphone applicatiosn.  As well as audio functionality it
	  has on board GPIO and regulator functionality which is
	  supported via the relevant subsystems.  This driver provides
	  core support for the WM8994, in order to use the actual
	  functionaltiy of the device other drivers must be enabled.
1243

L
Linus Walleij 已提交
1244
config MFD_STW481X
1245
	tristate "Support for ST Microelectronics STw481x"
L
Linus Walleij 已提交
1246 1247 1248 1249 1250 1251 1252 1253
	depends on I2C && ARCH_NOMADIK
	select REGMAP_I2C
	select MFD_CORE
	help
	  Select this option to enable the STw481x chip driver used
	  in various ST Microelectronics and ST-Ericsson embedded
	  Nomadik series.

1254
menu "Multimedia Capabilities Port drivers"
1255
	depends on ARCH_SA1100
1256 1257 1258 1259

config MCP
	tristate

R
Russell King 已提交
1260 1261 1262 1263 1264 1265
# Interface drivers
config MCP_SA11X0
	tristate "Support SA11x0 MCP interface"
	depends on ARCH_SA1100
	select MCP

1266 1267
# Chip drivers
config MCP_UCB1200
1268
	tristate "Support for UCB1200 / UCB1300"
1269 1270
	depends on MCP_SA11X0
	select MCP
1271

1272 1273 1274 1275
config MCP_UCB1200_TS
	tristate "Touchscreen interface support"
	depends on MCP_UCB1200 && INPUT

1276
endmenu
1277

1278 1279
config MFD_VEXPRESS_SYSREG
	bool "Versatile Express System Registers"
1280
	depends on VEXPRESS_CONFIG && GPIOLIB
1281 1282 1283 1284 1285
	default y
	select CLKSRC_MMIO
	select GPIO_GENERIC_PLATFORM
	select MFD_CORE
	select MFD_SYSCON
1286
	help
1287 1288
	  System Registers are the platform configuration block
	  on the ARM Ltd. Versatile Express board.
1289 1290 1291

endmenu
endif