mach-ux500: move the DB8500 PRCMU driver to MFD

We have decided that this function arbiter fits better in the MFD
subsystem. Since we need to concatenate the split header files we move
it basically like this:

mv mach-ux500/prcmu-db8500.c drivers/mfd/db8500-prcmu.c
mv mach-ux500/include/mach/prcmu-defs.h include/linux/mfd/db8500-prcmu.h
mv mach-ux500/include/mach/prcmu-regs.h drivers/mfd/db8500-prcmu-regs.h
mach-ux500/include/mach/prcmu.h >> include/linux/mfd/db8500-prcmu.h
rm arch/arm/mach-ux500/include/mach/prcmu.h

Then we update different #include statements and Makefile orders etc
to make the PRCMU driver compile, link and boot in the new place
without really changing any code.
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

arch/arm/mach-ux500/Kconfig

@@ -15,6 +15,7 @@ config UX500_SOC_DB5500
 
 config UX500_SOC_DB8500
 	bool "DB8500"
+	select MFD_DB8500_PRCMU
 
 endmenu
 

arch/arm/mach-ux500/Makefile

@@ -5,7 +5,7 @@
 obj-y				:= clock.o cpu.o devices.o devices-common.o \
 				   id.o usb.o
 obj-$(CONFIG_UX500_SOC_DB5500)	+= cpu-db5500.o dma-db5500.o
-obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o prcmu-db8500.o
+obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_U8500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
 				board-mop500-uib.o board-mop500-stuib.o \

arch/arm/mach-ux500/cpu.c

@@ -8,6 +8,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/mfd/db8500-prcmu.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware/cache-l2x0.h>
@@ -19,7 +20,6 @@
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
-#include <mach/prcmu.h>
 
 #include "clock.h"
 

arch/arm/mach-ux500/cpufreq.c

@@ -17,10 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
+#include <linux/mfd/db8500-prcmu.h>
 
 #include <mach/hardware.h>
-#include <mach/prcmu.h>
-#include <mach/prcmu-defs.h>
 
 #define DRIVER_NAME "cpufreq-u8500"
 #define CPUFREQ_NAME "u8500"

arch/arm/mach-ux500/include/mach/prcmu-defs.h

-/*
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- *
- * License Terms: GNU General Public License v2
- *
- * PRCM Unit definitions
- */
-
-#ifndef __MACH_PRCMU_DEFS_H
-#define __MACH_PRCMU_DEFS_H
-
-enum prcmu_cpu_opp {
-	CPU_OPP_INIT	  = 0x00,
-	CPU_OPP_NO_CHANGE = 0x01,
-	CPU_OPP_100	  = 0x02,
-	CPU_OPP_50	  = 0x03,
-	CPU_OPP_MAX	  = 0x04,
-	CPU_OPP_EXT_CLK	  = 0x07
-};
-enum prcmu_ape_opp {
-	APE_OPP_NO_CHANGE = 0x00,
-	APE_OPP_100	  = 0x02,
-	APE_OPP_50	  = 0x03,
-};
-
-#endif /* __MACH_PRCMU_DEFS_H */

drivers/mfd/Kconfig

@@ -538,7 +538,7 @@ config AB8500_CORE
 
 config AB8500_I2C_CORE
 	bool "AB8500 register access via PRCMU I2C"
-	depends on AB8500_CORE && UX500_SOC_DB8500
+	depends on AB8500_CORE && MFD_DB8500_PRCMU
 	default y
 	help
 	  This enables register access to the AB8500 chip via PRCMU I2C.
@@ -575,6 +575,16 @@ config AB3550_CORE
 	  LEDs, vibrator, system power and temperature, power management
 	  and ALSA sound.
 
+config MFD_DB8500_PRCMU
+	bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
+	depends on UX500_SOC_DB8500
+	select MFD_CORE
+	help
+	  Select this option to enable support for the DB8500 Power Reset
+	  and Control Management Unit. This is basically an autonomous
+	  system controller running an XP70 microprocessor, which is accessed
+	  through a register map.
+
 config MFD_CS5535
 	tristate "Support for CS5535 and CS5536 southbridge core functions"
 	select MFD_CORE

drivers/mfd/Makefile

@@ -74,9 +74,11 @@ obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
 obj-$(CONFIG_AB3100_OTP)	+= ab3100-otp.o
 obj-$(CONFIG_AB3550_CORE)	+= ab3550-core.o
 obj-$(CONFIG_AB8500_CORE)	+= ab8500-core.o ab8500-sysctrl.o
-obj-$(CONFIG_AB8500_I2C_CORE)	+= ab8500-i2c.o
 obj-$(CONFIG_AB8500_DEBUG)	+= ab8500-debugfs.o
 obj-$(CONFIG_AB8500_GPADC)	+= ab8500-gpadc.o
+obj-$(CONFIG_MFD_DB8500_PRCMU)	+= db8500-prcmu.o
+# ab8500-i2c need to come after db8500-prcmu (which provides the channel)
+obj-$(CONFIG_AB8500_I2C_CORE)	+= ab8500-i2c.o
 obj-$(CONFIG_MFD_TIMBERDALE)    += timberdale.o
 obj-$(CONFIG_PMIC_ADP5520)	+= adp5520.o
 obj-$(CONFIG_LPC_SCH)		+= lpc_sch.o

drivers/mfd/ab8500-i2c.c

@@ -11,8 +11,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/mfd/ab8500.h>
-
-#include <mach/prcmu.h>
+#include <linux/mfd/db8500-prcmu.h>
 
 static int ab8500_i2c_write(struct ab8500 *ab8500, u16 addr, u8 data)
 {

arch/arm/mach-ux500/prcmu-db8500.c → drivers/mfd/db8500-prcmu.c

@@ -20,10 +20,11 @@
 #include <linux/jiffies.h>
 #include <linux/bitops.h>
 #include <linux/interrupt.h>
+#include <linux/mfd/db8500-prcmu.h>
 
 #include <mach/hardware.h>
-#include <mach/prcmu-regs.h>
-#include <mach/prcmu-defs.h>
+
+#include "db8500-prcmu-regs.h"
 
 /* Global var to runtime determine TCDM base for v2 or v1 */
 static __iomem void *tcdm_base;

arch/arm/mach-ux500/include/mach/prcmu.h → include/linux/mfd/db8500-prcmu.h

+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit definitions
+ */
+
+#ifndef __MACH_PRCMU_DEFS_H
+#define __MACH_PRCMU_DEFS_H
+
+enum prcmu_cpu_opp {
+	CPU_OPP_INIT	  = 0x00,
+	CPU_OPP_NO_CHANGE = 0x01,
+	CPU_OPP_100	  = 0x02,
+	CPU_OPP_50	  = 0x03,
+	CPU_OPP_MAX	  = 0x04,
+	CPU_OPP_EXT_CLK	  = 0x07
+};
+enum prcmu_ape_opp {
+	APE_OPP_NO_CHANGE = 0x00,
+	APE_OPP_100	  = 0x02,
+	APE_OPP_50	  = 0x03,
+};
+
+#endif /* __MACH_PRCMU_DEFS_H */
+
 /*
  * Copyright (C) STMicroelectronics 2009
  * Copyright (C) ST-Ericsson SA 2010
@@ -12,7 +43,6 @@
  */
 #ifndef __MACH_PRCMU_H
 #define __MACH_PRCMU_H
-#include <mach/prcmu-defs.h>
 
 void __init prcmu_early_init(void);
 int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
@@ -21,7 +51,7 @@ int prcmu_set_ape_opp(enum prcmu_ape_opp opp);
 int prcmu_set_cpu_opp(enum prcmu_cpu_opp opp);
 int prcmu_set_ape_cpu_opps(enum prcmu_ape_opp ape_opp,
 			   enum prcmu_cpu_opp cpu_opp);
-int prcmu_get_ape_opp(void);
+enum prcmu_ape_opp prcmu_get_ape_opp(void);
 int prcmu_get_cpu_opp(void);
 bool prcmu_has_arm_maxopp(void);