Kconfig 19.7 KB
Newer Older
1 2 3 4
#
# Multifunction miscellaneous devices
#

5 6
menuconfig MFD_SUPPORT
	bool "Multifunction device drivers"
7
	depends on HAS_IOMEM
8 9
	default y
	help
10 11 12 13 14 15 16 17 18 19
	  Multifunction devices embed several functions (e.g. GPIOs,
	  touchscreens, keyboards, current regulators, power management chips,
	  etc...) in one single integrated circuit. They usually talk to the
	  main CPU through one or more IRQ lines and low speed data busses (SPI,
	  I2C, etc..). They appear as one single device to the main system
	  through the data bus and the MFD framework allows for sub devices
	  (a.k.a. functions) to appear as discrete platform devices.
	  MFDs are typically found on embedded platforms.

	  This option alone does not add any kernel code.
20 21

if MFD_SUPPORT
B
Ben Dooks 已提交
22

23 24 25 26
config MFD_CORE
	tristate
	default n

27 28
config MFD_88PM860X
	bool "Support Marvell 88PM8606/88PM8607"
29
	depends on I2C=y && GENERIC_HARDIRQS
30 31 32 33 34 35 36
	select MFD_CORE
	help
	  This supports for Marvell 88PM8606/88PM8607 Power Management IC.
	  This includes the I2C driver and the core APIs _only_, you have to
	  select individual components like voltage regulators, RTC and
	  battery-charger under the corresponding menus.

B
Ben Dooks 已提交
37 38 39 40 41
config MFD_SM501
	tristate "Support for Silicon Motion SM501"
	 ---help---
	  This is the core driver for the Silicon Motion SM501 multimedia
	  companion chip. This device is a multifunction device which may
M
Matt LaPlante 已提交
42 43
	  provide numerous interfaces including USB host controller, USB gadget,
	  asynchronous serial ports, audio functions, and a dual display video
B
Ben Dooks 已提交
44 45 46
	  interface. The device may be connected by PCI or local bus with
	  varying functions enabled.

B
Ben Dooks 已提交
47 48
config MFD_SM501_GPIO
	bool "Export GPIO via GPIO layer"
49
	depends on MFD_SM501 && GPIOLIB
B
Ben Dooks 已提交
50 51 52 53 54
	 ---help---
	 This option uses the gpio library layer to export the 64 GPIO
	 lines on the SM501. The platform data is used to supply the
	 base number for the first GPIO line to register.

S
Samuel Ortiz 已提交
55 56
config MFD_ASIC3
	bool "Support for Compaq ASIC3"
57
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
P
Philipp Zabel 已提交
58
	select MFD_CORE
S
Samuel Ortiz 已提交
59 60 61 62
	 ---help---
	  This driver supports the ASIC3 multifunction chip found on many
	  PDAs (mainly iPAQ and HTC based ones)

63 64
config MFD_SH_MOBILE_SDHI
	bool "Support for SuperH Mobile SDHI"
M
Magnus Damm 已提交
65
	depends on SUPERH || ARCH_SHMOBILE
66
	select MFD_CORE
67
	select TMIO_MMC_DMA
68 69 70 71
	 ---help---
	  This driver supports the SDHI hardware block found in many
	  SuperH Mobile SoCs.

M
Miguel Aguilar 已提交
72 73 74 75
config MFD_DAVINCI_VOICECODEC
	tristate
	select MFD_CORE

D
David Brownell 已提交
76 77
config MFD_DM355EVM_MSP
	bool "DaVinci DM355 EVM microcontroller"
78
	depends on I2C=y && MACH_DAVINCI_DM355_EVM
D
David Brownell 已提交
79 80 81 82 83
	help
	  This driver supports the MSP430 microcontroller used on these
	  boards.  MSP430 firmware manages resets and power sequencing,
	  inputs from buttons and the IR remote, LEDs, an RTC, and more.

84 85
config HTC_EGPIO
	bool "HTC EGPIO support"
M
Michael Buesch 已提交
86
	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
87 88 89 90 91
	help
	    This driver supports the CPLD egpio chip present on
	    several HTC phones.  It provides basic support for input
	    pins, output pins, and irqs.

92 93
config HTC_PASIC3
	tristate "HTC PASIC3 LED/DS1WM chip support"
94
	select MFD_CORE
95 96 97 98 99 100
	help
	  This core driver provides register access for the LED/DS1WM
	  chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
	  HTC Magician devices, respectively. Actual functionality is
	  handled by the leds-pasic3 and ds1wm drivers.

C
Cory Maccarrone 已提交
101 102
config HTC_I2CPLD
	bool "HTC I2C PLD chip support"
103
	depends on I2C=y && GPIOLIB
C
Cory Maccarrone 已提交
104 105 106 107 108 109
	help
	  If you say yes here you get support for the supposed CPLD
	  found on omap850 HTC devices like the HTC Wizard and HTC Herald.
	  This device provides input and output GPIOs through an I2C
	  interface to one or more sub-chips.

110 111
config UCB1400_CORE
	tristate "Philips UCB1400 Core driver"
112
	depends on AC97_BUS
A
Andrew Morton 已提交
113
	depends on GPIOLIB
114 115 116 117 118 119 120
	help
	  This enables support for the Philips UCB1400 core functions.
	  The UCB1400 is an AC97 audio codec.

	  To compile this driver as a module, choose M here: the
	  module will be called ucb1400_core.

121 122 123 124 125 126 127 128 129 130 131 132 133
config TPS65010
	tristate "TPS6501x Power Management chips"
	depends on I2C && GPIOLIB
	default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
	help
	  If you say yes here you get support for the TPS6501x series of
	  Power Management chips.  These include voltage regulators,
	  lithium ion/polymer battery charging, and other features that
	  are often used in portable devices like cell phones and cameras.

	  This driver can also be built as a module.  If so, the module
	  will be called tps65010.

T
Todd Fischer 已提交
134 135 136 137 138 139 140 141 142 143 144 145
config TPS6507X
	tristate "TPS6507x Power Management / Touch Screen chips"
	select MFD_CORE
	depends on I2C
	help
	  If you say yes here you get support for the TPS6507x series of
	  Power Management / Touch Screen chips.  These include voltage
	  regulators, lithium ion/polymer battery charging, touch screen
	  and other features that are often used in portable devices.
	  This driver can also be built as a module.  If so, the module
	  will be called tps6507x.

146 147
config MENELAUS
	bool "Texas Instruments TWL92330/Menelaus PM chip"
148
	depends on I2C=y && ARCH_OMAP2
149 150 151
	help
	  If you say yes here you get support for the Texas Instruments
	  TWL92330/Menelaus Power Management chip. This include voltage
152
	  regulators, Dual slot memory card transceivers, real-time clock
153 154 155
	  and other features that are often used in portable devices like
	  cell phones and PDAs.

D
David Brownell 已提交
156
config TWL4030_CORE
157
	bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
158
	depends on I2C=y && GENERIC_HARDIRQS
D
David Brownell 已提交
159
	help
160
	  Say yes here if you have TWL4030 / TWL6030 family chip on your board.
D
David Brownell 已提交
161 162 163 164 165 166 167 168 169
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

	  These multi-function chips are found on many OMAP2 and OMAP3
	  boards, providing power management, RTC, GPIO, keypad, a
	  high speed USB OTG transceiver, an audio codec (on most
	  versions) and many other features.

170 171 172 173 174 175 176 177 178 179 180 181 182
config TWL4030_POWER
	bool "Support power resources on TWL4030 family chips"
	depends on TWL4030_CORE && ARM
	help
	  Say yes here if you want to use the power resources on the
	  TWL4030 family chips.  Most of these resources are regulators,
	  which have a separate driver; some are control signals, such
	  as clock request handshaking.

	  This driver uses board-specific data to initialize the resources
	  and load scripts controling which resources are switched off/on
	  or reset when a sleep, wakeup or warm reset event occurs.

183 184 185 186 187 188
config TWL4030_CODEC
	bool
	depends on TWL4030_CORE
	select MFD_CORE
	default n

H
Hemanth V 已提交
189 190 191 192 193 194 195 196 197
config TWL6030_PWM
	tristate "TWL6030 PWM (Pulse Width Modulator) Support"
	depends on TWL4030_CORE
	select HAVE_PWM
	default n
	help
	  Say yes here if you want support for TWL6030 PWM.
	  This is used to control charging LED brightness.

198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220
config MFD_STMPE
	bool "Support STMicroelectronics STMPE"
	depends on I2C=y && GENERIC_HARDIRQS
	select MFD_CORE
	help
	  Support for the STMPE family of I/O Expanders from
	  STMicroelectronics.

	  Currently supported devices are:

		STMPE811: GPIO, Touchscreen
		STMPE1601: GPIO, Keypad
		STMPE2401: GPIO, Keypad
		STMPE2403: GPIO, Keypad

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the functionality
	  of the device.  Currently available sub drivers are:

		GPIO: stmpe-gpio
		Keypad: stmpe-keypad
		Touchscreen: stmpe-ts

221 222
config MFD_TC3589X
	bool "Support Toshiba TC35892 and variants"
223 224 225
	depends on I2C=y && GENERIC_HARDIRQS
	select MFD_CORE
	help
226
	  Support for the Toshiba TC35892 and variants I/O Expander.
227 228 229 230 231

	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

232 233 234 235
config MFD_TMIO
	bool
	default n

236 237 238 239 240
config TMIO_MMC_DMA
	bool
	select DMA_ENGINE
	select DMADEVICES

241 242
config MFD_T7L66XB
	bool "Support Toshiba T7L66XB"
243
	depends on ARM && HAVE_CLK
244
	select MFD_CORE
245
	select MFD_TMIO
246 247 248
	help
	  Support for Toshiba Mobile IO Controller T7L66XB

249 250
config MFD_TC6387XB
	bool "Support Toshiba TC6387XB"
251
	depends on ARM && HAVE_CLK
252
	select MFD_CORE
253
	select MFD_TMIO
254 255 256
	help
	  Support for Toshiba Mobile IO Controller TC6387XB

257 258
config MFD_TC6393XB
	bool "Support Toshiba TC6393XB"
A
Adrian Bunk 已提交
259
	depends on GPIOLIB && ARM
260
	select MFD_CORE
261
	select MFD_TMIO
262 263 264
	help
	  Support for Toshiba Mobile IO Controller TC6393XB

265 266 267 268 269 270 271 272 273 274
config PMIC_DA903X
	bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
	depends on I2C=y
	help
	  Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
	  ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
	  usually found on PXA processors-based platforms. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, voltage regulators,
	  LEDs and battery-charger under the corresponding menus.
275 276 277 278 279 280 281 282 283 284

config PMIC_ADP5520
	bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
	depends on I2C=y
	help
	  Say yes here to add support for Analog Devices AD5520 and ADP5501,
	  Multifunction Power Management IC. This includes
	  the I2C driver and the core APIs _only_, you have to select
	  individual components like LCD backlight, LEDs, GPIOs and Kepad
	  under the corresponding menus.
285

H
Haojian Zhuang 已提交
286
config MFD_MAX8925
287
	bool "Maxim Semiconductor MAX8925 PMIC Support"
288
	depends on I2C=y && GENERIC_HARDIRQS
H
Haojian Zhuang 已提交
289
	select MFD_CORE
H
Haojian Zhuang 已提交
290 291 292 293 294 295
	help
	  Say yes here to support for Maxim Semiconductor MAX8925. This is
	  a Power Management IC. This driver provies common support for
	  accessing the device, additional drivers must be enabled in order
	  to use the functionality of the device.

296
config MFD_MAX8998
K
Kyungmin Park 已提交
297
	bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
298
	depends on I2C=y && GENERIC_HARDIRQS
299 300
	select MFD_CORE
	help
K
Kyungmin Park 已提交
301 302 303 304 305
	  Say yes here to support for Maxim Semiconductor MAX8998 and
	  National Semiconductor LP3974. This is a Power Management IC.
	  This driver provies common support for accessing the device,
	  additional drivers must be enabled in order to use the functionality
	  of the device.
306

307 308
config MFD_WM8400
	tristate "Support Wolfson Microelectronics WM8400"
M
Mark Brown 已提交
309
	select MFD_CORE
310
	depends on I2C
311 312
	help
	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
313
	  CODEC.  This driver provides common support for accessing
314 315 316
	  the device, additional drivers must be enabled in order to use
	  the functionality of the device.

M
Mark Brown 已提交
317
config MFD_WM831X
318 319 320 321 322
	bool
	depends on GENERIC_HARDIRQS

config MFD_WM831X_I2C
	bool "Support Wolfson Microelectronics WM831x/2x PMICs with I2C"
M
Mark Brown 已提交
323
	select MFD_CORE
324
	select MFD_WM831X
325
	depends on I2C=y && GENERIC_HARDIRQS
M
Mark Brown 已提交
326
	help
327 328 329 330
	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
	  when controlled using I2C.  This driver provides common support
	  for accessing the device, additional drivers must be enabled in
	  order to use the functionality of the device.
M
Mark Brown 已提交
331

M
Mark Brown 已提交
332 333 334 335 336 337 338 339 340 341 342
config MFD_WM831X_SPI
	bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
	select MFD_CORE
	select MFD_WM831X
	depends on SPI_MASTER && GENERIC_HARDIRQS
	help
	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
	  when controlled using SPI.  This driver provides common support
	  for accessing the device, additional drivers must be enabled in
	  order to use the functionality of the device.

343
config MFD_WM8350
344
	bool
345
	depends on GENERIC_HARDIRQS
346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362

config MFD_WM8350_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8350_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

M
Mark Brown 已提交
363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378
config MFD_WM8351_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8351_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

M
Mark Brown 已提交
379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394
config MFD_WM8352_CONFIG_MODE_0
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_1
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_2
	bool
	depends on MFD_WM8350

config MFD_WM8352_CONFIG_MODE_3
	bool
	depends on MFD_WM8350

395
config MFD_WM8350_I2C
396
	bool "Support Wolfson Microelectronics WM8350 with I2C"
397
	select MFD_WM8350
398
	depends on I2C=y && GENERIC_HARDIRQS
399 400 401 402 403 404 405
	help
	  The WM8350 is an integrated audio and power management
	  subsystem with watchdog and RTC functionality for embedded
	  systems.  This option enables core support for the WM8350 with
	  I2C as the control interface.  Additional options must be
	  selected to enable support for the functionality of the chip.

M
Mark Brown 已提交
406
config MFD_WM8994
407
	bool "Support Wolfson Microelectronics WM8994"
M
Mark Brown 已提交
408
	select MFD_CORE
409
	depends on I2C=y && GENERIC_HARDIRQS
M
Mark Brown 已提交
410 411 412 413 414 415 416 417
	help
	  The WM8994 is a highly integrated hi-fi CODEC designed for
	  smartphone applicatiosn.  As well as audio functionality it
	  has on board GPIO and regulator functionality which is
	  supported via the relevant subsystems.  This driver provides
	  core support for the WM8994, in order to use the actual
	  functionaltiy of the device other drivers must be enabled.

B
Balaji Rao 已提交
418 419 420 421 422 423 424 425 426
config MFD_PCF50633
	tristate "Support for NXP PCF50633"
	depends on I2C
	help
	  Say yes here if you have NXP PCF50633 chip on your board.
	  This core driver provides register access and IRQ handling
	  facilities, and registers devices for the various functions
	  so that function-specific drivers can bind to them.

S
Sascha Hauer 已提交
427
config MFD_MC13783
428 429 430 431
	tristate

config MFD_MC13XXX
	tristate "Support Freescale MC13783 and MC13892"
S
Sascha Hauer 已提交
432 433
	depends on SPI_MASTER
	select MFD_CORE
434
	select MFD_MC13783
S
Sascha Hauer 已提交
435
	help
436 437
	  Support for the Freescale (Atlas) PMIC and audio CODECs
	  MC13783 and MC13892.
S
Sascha Hauer 已提交
438 439 440 441
	  This driver provides common support for accessing  the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

B
Balaji Rao 已提交
442 443 444 445 446 447 448
config PCF50633_ADC
	tristate "Support for NXP PCF50633 ADC"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support for ADC in the
	 NXP PCF50633 chip.

B
Balaji Rao 已提交
449 450 451 452 453 454 455
config PCF50633_GPIO
	tristate "Support for NXP PCF50633 GPIO"
	depends on MFD_PCF50633
	help
	 Say yes here if you want to include support GPIO for pins on
	 the PCF50633 chip.

456 457
config ABX500_CORE
	bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
458
	default y if ARCH_U300 || ARCH_U8500
459 460 461 462 463 464 465
	help
	  Say yes here if you have the ABX500 Mixed Signal IC family
	  chips. This core driver expose register access functions.
	  Functionality specific drivers using these functions can
	  remain unchanged when IC changes. Binding of the functions to
	  actual register access is done by the IC core driver.

466
config AB3100_CORE
467
	bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
468
	depends on I2C=y && ABX500_CORE
469
	select MFD_CORE
470 471 472 473 474 475 476 477 478 479 480
	default y if ARCH_U300
	help
	  Select this to enable the AB3100 Mixed Signal IC core
	  functionality. This connects to a AB3100 on the I2C bus
	  and expose a number of symbols needed for dependent devices
	  to read and write registers and subscribe to events from
	  this multi-functional IC. This is needed to use other features
	  of the AB3100 such as battery-backed RTC, charging control,
	  LEDs, vibrator, system power and temperature, power management
	  and ALSA sound.

L
Linus Walleij 已提交
481 482 483 484 485 486 487 488 489
config AB3100_OTP
	tristate "ST-Ericsson AB3100 OTP functions"
	depends on AB3100_CORE
	default y if AB3100_CORE
	help
	  Select this to enable the AB3100 Mixed Signal IC OTP (one-time
	  programmable memory) support. This exposes a sysfs file to read
	  out OTP values.

D
Daniel Ribeiro 已提交
490 491 492 493 494 495 496
config EZX_PCAP
	bool "PCAP Support"
	depends on GENERIC_HARDIRQS && SPI_MASTER
	help
	  This enables the PCAP ASIC present on EZX Phones. This is
	  needed for MMC, TouchScreen, Sound, USB, etc..

R
Rabin Vincent 已提交
497 498
config AB8500_CORE
	bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
499
	depends on GENERIC_HARDIRQS && ABX500_CORE && SPI_MASTER && ARCH_U8500
R
Rabin Vincent 已提交
500
	select MFD_CORE
S
Srinidhi Kasagar 已提交
501
	help
R
Rabin Vincent 已提交
502
	  Select this option to enable access to AB8500 power management
503 504 505
	  chip. This connects to U8500 either on the SSP/SPI bus
	  or the I2C bus via PRCMU. It also adds the irq_chip
	  parts for handling the Mixed Signal chip events.
S
Srinidhi Kasagar 已提交
506 507
	  This chip embeds various other multimedia funtionalities as well.

508 509 510 511 512 513 514 515 516 517
config AB8500_I2C_CORE
	bool "AB8500 register access via PRCMU I2C"
	depends on AB8500_CORE && UX500_SOC_DB8500
	default y
	help
	  This enables register access to the AB8500 chip via PRCMU I2C.
	  The AB8500 chip can be accessed via SPI or I2C. On DB8500 hardware
	  the I2C bus is connected to the Power Reset
	  and Mangagement Unit, PRCMU.

M
Mattias Wallin 已提交
518 519 520 521 522 523 524 525
config AB8500_DEBUG
       bool "Enable debug info via debugfs"
       depends on AB8500_CORE && DEBUG_FS
       default y if DEBUG_FS
       help
         Select this option if you want debug information using the debug
         filesystem, debugfs.

M
Mattias Wallin 已提交
526 527 528 529 530 531 532 533 534 535 536 537 538 539
config AB3550_CORE
        bool "ST-Ericsson AB3550 Mixed Signal Circuit core functions"
	select MFD_CORE
	depends on I2C=y && GENERIC_HARDIRQS && ABX500_CORE
	help
	  Select this to enable the AB3550 Mixed Signal IC core
	  functionality. This connects to a AB3550 on the I2C bus
	  and expose a number of symbols needed for dependent devices
	  to read and write registers and subscribe to events from
	  this multi-functional IC. This is needed to use other features
	  of the AB3550 such as battery-backed RTC, charging control,
	  LEDs, vibrator, system power and temperature, power management
	  and ALSA sound.

540 541 542
config MFD_TIMBERDALE
	tristate "Support for the Timberdale FPGA"
	select MFD_CORE
543
	depends on PCI && GPIOLIB
544 545 546 547 548 549
	---help---
	This is the core driver for the timberdale FPGA. This device is a
	multifunction device which exposes numerous platform devices.

	The timberdale FPGA can be found on the Intel Atom development board
	for in-vehicle infontainment, called Russellville.
550 551 552 553 554 555 556 557 558

config LPC_SCH
	tristate "Intel SCH LPC"
	depends on PCI
	select MFD_CORE
	help
	  LPC bridge function of the Intel SCH provides support for
	  System Management Bus and General Purpose I/O.

559 560 561 562 563 564 565 566 567
config MFD_RDC321X
	tristate "Support for RDC-R321x southbridge"
	select MFD_CORE
	depends on PCI
	help
	  Say yes here if you want to have support for the RDC R-321x SoC
	  southbridge which provides access to GPIOs and Watchdog using the
	  southbridge PCI device configuration space.

568 569 570 571 572 573 574 575 576 577
config MFD_JANZ_CMODIO
	tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
	select MFD_CORE
	depends on PCI
	help
	  This is the core driver for the Janz CMOD-IO PCI MODULbus
	  carrier board. This device is a PCI to MODULbus bridge which may
	  host many different types of MODULbus daughterboards, including
	  CAN and GPIO controllers.

L
Lars-Peter Clausen 已提交
578 579 580 581 582 583 584 585
config MFD_JZ4740_ADC
	tristate "Support for the JZ4740 SoC ADC core"
	select MFD_CORE
	depends on MACH_JZ4740
	help
	  Say yes here if you want support for the ADC unit in the JZ4740 SoC.
	  This driver is necessary for jz4740-battery and jz4740-hwmon driver.

M
Mike Rapoport 已提交
586
config MFD_TPS6586X
587 588
	bool "TPS6586x Power Management chips"
	depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS
M
Mike Rapoport 已提交
589 590 591 592 593 594 595 596 597 598 599
	select MFD_CORE
	help
	  If you say yes here you get support for the TPS6586X series of
	  Power Management chips.
	  This driver provides common support for accessing the device,
	  additional drivers must be enabled in order to use the
	  functionality of the device.

	  This driver can also be built as a module.  If so, the module
	  will be called tps6586x.

600 601 602 603 604 605 606 607 608
config MFD_VX855
	tristate "Support for VIA VX855/VX875 integrated south bridge"
	depends on PCI
	select MFD_CORE
	help
	  Say yes here to enable support for various functions of the
	  VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
	  and/or vx855_gpio drivers for this to do anything useful.

609 610 611 612 613 614 615 616 617 618
config MFD_WL1273_CORE
	tristate
	depends on I2C
	select MFD_CORE
	default n
	help
	  This is the core driver for the TI WL1273 FM radio. This MFD
	  driver connects the radio-wl1273 V4L2 module and the wl1273
	  audio codec.

619
endif # MFD_SUPPORT
B
Ben Dooks 已提交
620

621
menu "Multimedia Capabilities Port drivers"
622
	depends on ARCH_SA1100
623 624 625 626

config MCP
	tristate

R
Russell King 已提交
627 628 629 630 631 632
# Interface drivers
config MCP_SA11X0
	tristate "Support SA11x0 MCP interface"
	depends on ARCH_SA1100
	select MCP

633 634 635 636 637
# Chip drivers
config MCP_UCB1200
	tristate "Support for UCB1200 / UCB1300"
	depends on MCP

638 639 640 641
config MCP_UCB1200_TS
	tristate "Touchscreen interface support"
	depends on MCP_UCB1200 && INPUT

642
endmenu