Kconfig 42.3 KB
Newer Older
1
#
2
# Hardware monitoring chip drivers configuration
3 4
#

J
Jan Engelhardt 已提交
5
menuconfig HWMON
6
	tristate "Hardware Monitoring support"
7
	depends on HAS_IOMEM
8 9 10 11 12 13
	default y
	help
	  Hardware monitoring devices let you monitor the hardware health
	  of a system. Most modern motherboards include such a device. It
	  can include temperature sensors, voltage sensors, fan speed
	  sensors and various additional features such as the ability to
14 15 16 17
	  control the speed of the fans.  If you want this support you
	  should say Y here and also to the specific driver(s) for your
	  sensors chip(s) below.

18 19 20 21
	  To find out which specific driver(s) you need, use the
	  sensors-detect script from the lm_sensors package.  Read
	  <file:Documentation/hwmon/userspace-tools> for details.

22 23
	  This support can also be built as a module.  If so, the module
	  will be called hwmon.
24

J
Jan Engelhardt 已提交
25 26
if HWMON

27 28 29 30
config HWMON_VID
	tristate
	default n

31 32 33 34 35 36 37 38 39 40 41
config HWMON_DEBUG_CHIP
	bool "Hardware Monitoring Chip debugging messages"
	default n
	help
	  Say Y here if you want the I2C chip drivers to produce a bunch of
	  debug messages to the system log.  Select this if you are having
	  a problem with I2C support and want to see more of what is going
	  on.

comment "Native drivers"

42
config SENSORS_ABITUGURU
43
	tristate "Abit uGuru (rev 1 & 2)"
J
Jean Delvare 已提交
44
	depends on X86 && DMI && EXPERIMENTAL
45
	help
46 47 48 49 50 51 52
	  If you say yes here you get support for the sensor part of the first
	  and second revision of the Abit uGuru chip. The voltage and frequency
	  control parts of the Abit uGuru are not supported. The Abit uGuru
	  chip can be found on Abit uGuru featuring motherboards (most modern
	  Abit motherboards from before end 2005). For more info and a list
	  of which motherboards have which revision see
	  Documentation/hwmon/abituguru
53 54 55 56

	  This driver can also be built as a module.  If so, the module
	  will be called abituguru.

57 58
config SENSORS_ABITUGURU3
	tristate "Abit uGuru (rev 3)"
J
Jean Delvare 已提交
59
	depends on X86 && DMI && EXPERIMENTAL
60 61 62 63 64 65 66 67 68 69 70
	help
	  If you say yes here you get support for the sensor part of the
	  third revision of the Abit uGuru chip. Only reading the sensors
	  and their settings is supported. The third revision of the Abit
	  uGuru chip can be found on recent Abit motherboards (since end
	  2005). For more info and a list of which motherboards have which
	  revision see Documentation/hwmon/abituguru3

	  This driver can also be built as a module.  If so, the module
	  will be called abituguru3.

S
Sean MacLennan 已提交
71 72 73 74 75 76 77 78 79 80
config SENSORS_AD7414
	tristate "Analog Devices AD7414"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  AD7414 temperature monitoring chip.

	  This driver can also be built as a module. If so, the module
	  will be called ad7414.

81 82
config SENSORS_AD7418
	tristate "Analog Devices AD7416, AD7417 and AD7418"
J
Jan Engelhardt 已提交
83
	depends on I2C && EXPERIMENTAL
84 85 86 87 88 89 90
	help
	  If you say yes here you get support for the Analog Devices
	  AD7416, AD7417 and AD7418 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called ad7418.

M
Marc Pignat 已提交
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106
config SENSORS_ADCXX
	tristate "National Semiconductor ADCxxxSxxx"
	depends on SPI_MASTER && EXPERIMENTAL
	help
	  If you say yes here you get support for the National Semiconductor
	  ADC<bb><c>S<sss> chip family, where
	  * bb  is the resolution in number of bits (8, 10, 12)
	  * c   is the number of channels (1, 2, 4, 8)
	  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
	    kSPS and 101 for 1 MSPS)

	  Examples : ADC081S101, ADC124S501, ...

	  This driver can also be built as a module.  If so, the module
	  will be called adcxx.

107 108
config SENSORS_ADM1021
	tristate "Analog Devices ADM1021 and compatibles"
J
Jan Engelhardt 已提交
109
	depends on I2C
110 111 112
	help
	  If you say yes here you get support for Analog Devices ADM1021
	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
113
	  Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10.
114 115 116 117 118 119

	  This driver can also be built as a module.  If so, the module
	  will be called adm1021.

config SENSORS_ADM1025
	tristate "Analog Devices ADM1025 and compatibles"
J
Jan Engelhardt 已提交
120
	depends on I2C
121
	select HWMON_VID
122 123 124 125 126 127 128 129 130
	help
	  If you say yes here you get support for Analog Devices ADM1025
	  and Philips NE1619 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1025.

config SENSORS_ADM1026
	tristate "Analog Devices ADM1026 and compatibles"
131
	depends on I2C
132
	select HWMON_VID
133 134 135 136 137 138 139
	help
	  If you say yes here you get support for Analog Devices ADM1026
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1026.

140 141
config SENSORS_ADM1029
	tristate "Analog Devices ADM1029"
142
	depends on I2C
143 144 145 146 147 148 149 150
	help
	  If you say yes here you get support for Analog Devices ADM1029
	  sensor chip.
	  Very rare chip, please let us know you use it.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1029.

151 152
config SENSORS_ADM1031
	tristate "Analog Devices ADM1031 and compatibles"
153
	depends on I2C
154 155 156 157 158 159 160 161 162
	help
	  If you say yes here you get support for Analog Devices ADM1031
	  and ADM1030 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1031.

config SENSORS_ADM9240
	tristate "Analog Devices ADM9240 and compatibles"
163
	depends on I2C
164
	select HWMON_VID
165 166 167 168 169 170 171
	help
	  If you say yes here you get support for Analog Devices ADM9240,
	  Dallas DS1780, National Semiconductor LM81 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm9240.

172 173 174 175 176 177 178 179 180 181
config SENSORS_ADT7411
	tristate "Analog Devices ADT7411"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7411 voltage and temperature monitoring chip.

	  This driver can also be built as a module. If so, the module
	  will be called adt7411.

D
Darrick J. Wong 已提交
182 183 184 185 186 187 188 189 190 191
config SENSORS_ADT7462
	tristate "Analog Devices ADT7462"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7462 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7462.

D
Darrick J. Wong 已提交
192 193 194 195 196 197 198 199 200 201
config SENSORS_ADT7470
	tristate "Analog Devices ADT7470"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7470 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7470.

202
config SENSORS_ADT7475
203
	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
204
	depends on I2C
205
	select HWMON_VID
206 207
	help
	  If you say yes here you get support for the Analog Devices
208 209
	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
	  chips.
210 211 212 213

	  This driver can also be build as a module.  If so, the module
	  will be called adt7475.

214 215
config SENSORS_ASC7621
	tristate "Andigilog aSC7621"
216
	depends on I2C
217 218
	help
	  If you say yes here you get support for the aSC7621
219 220
	  family of SMBus sensors chip found on most Intel X38, X48, X58,
	  945, 965 and 975 desktop boards.  Currently supported chips:
221 222 223 224 225 226
	  aSC7621
	  aSC7621a

	  This driver can also be built as a module.  If so, the module
	  will be called asc7621.

R
Rudolf Marek 已提交
227
config SENSORS_K8TEMP
R
Rudolf Marek 已提交
228
	tristate "AMD Athlon64/FX or Opteron temperature sensor"
J
Jan Engelhardt 已提交
229
	depends on X86 && PCI && EXPERIMENTAL
R
Rudolf Marek 已提交
230 231
	help
	  If you say yes here you get support for the temperature
R
Rudolf Marek 已提交
232 233 234
	  sensor(s) inside your CPU. Supported is whole AMD K8
	  microarchitecture. Please note that you will need at least
	  lm-sensors 2.10.1 for proper userspace support.
R
Rudolf Marek 已提交
235 236 237 238

	  This driver can also be built as a module.  If so, the module
	  will be called k8temp.

239
config SENSORS_K10TEMP
240
	tristate "AMD Family 10h+ temperature sensor"
241 242 243 244
	depends on X86 && PCI
	help
	  If you say yes here you get support for the temperature
	  sensor(s) inside your CPU. Supported are later revisions of
245
	  the AMD Family 10h and all revisions of the AMD Family 11h,
246
	  12h (Llano), 14h (Brazos) and 15h (Bulldozer) microarchitectures.
247 248 249 250

	  This driver can also be built as a module.  If so, the module
	  will be called k10temp.

251 252 253 254 255 256 257 258 259 260
config SENSORS_FAM15H_POWER
	tristate "AMD Family 15h processor power"
	depends on X86 && PCI
	help
	  If you say yes here you get support for processor power
	  information of your AMD family 15h CPU.

	  This driver can also be built as a module.  If so, the module
	  will be called fam15h_power.

261 262
config SENSORS_ASB100
	tristate "Asus ASB100 Bach"
J
Jean Delvare 已提交
263
	depends on X86 && I2C && EXPERIMENTAL
264
	select HWMON_VID
265 266 267 268 269 270 271 272 273
	help
	  If you say yes here you get support for the ASB100 Bach sensor
	  chip found on some Asus mainboards.

	  This driver can also be built as a module.  If so, the module
	  will be called asb100.

config SENSORS_ATXP1
	tristate "Attansic ATXP1 VID controller"
J
Jan Engelhardt 已提交
274
	depends on I2C && EXPERIMENTAL
275
	select HWMON_VID
276 277 278 279 280 281 282 283 284 285
	help
	  If you say yes here you get support for the Attansic ATXP1 VID
	  controller.

	  If your board have such a chip, you are able to control your CPU
	  core and other voltages.

	  This driver can also be built as a module.  If so, the module
	  will be called atxp1.

286 287 288 289 290 291 292 293 294 295
config SENSORS_DS620
	tristate "Dallas Semiconductor DS620"
	depends on I2C
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS620 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called ds620.

296 297
config SENSORS_DS1621
	tristate "Dallas Semiconductor DS1621 and DS1625"
J
Jan Engelhardt 已提交
298
	depends on I2C
299 300 301 302 303 304 305
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1621 and DS1625 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1621.

306 307 308 309 310 311 312 313 314 315
config SENSORS_I5K_AMB
	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
	depends on PCI && EXPERIMENTAL
	help
	  If you say yes here you get support for FB-DIMM AMB temperature
	  monitoring chips on systems with the Intel 5000 series chipset.

	  This driver can also be built as a module. If so, the module
	  will be called i5k_amb.

J
Jean Delvare 已提交
316
config SENSORS_F71805F
317
	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
J
Jean Delvare 已提交
318 319
	help
	  If you say yes here you get support for hardware monitoring
320 321
	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
	  Super-I/O chips.
J
Jean Delvare 已提交
322 323 324 325

	  This driver can also be built as a module.  If so, the module
	  will be called f71805f.

326
config SENSORS_F71882FG
327
	tristate "Fintek F71882FG and compatibles"
328
	help
329
	  If you say yes here you get support for hardware monitoring
330 331
	  features of many Fintek Super-I/O (LPC) chips. The currently
	  supported chips are:
332
	    F71808E/A
333 334 335
	    F71858FG
	    F71862FG
	    F71863FG
336
	    F71869F/E/A
337 338
	    F71882FG
	    F71883FG
339
	    F71889FG/ED/A
340 341
	    F8000
	    F81801U
342
	    F81865F
343 344 345 346

	  This driver can also be built as a module.  If so, the module
	  will be called f71882fg.

R
Riku Voipio 已提交
347
config SENSORS_F75375S
348 349
	tristate "Fintek F75375S/SP and F75373"
	depends on I2C
R
Riku Voipio 已提交
350 351 352 353 354 355 356
	help
	  If you say yes here you get support for hardware monitoring
	  features of the Fintek F75375S/SP and F75373

	  This driver can also be built as a module.  If so, the module
	  will be called f75375s.

357
config SENSORS_FSCHMD
358
	tristate "Fujitsu Siemens Computers sensor chips"
359
	depends on X86 && I2C
360
	help
361 362
	  If you say yes here you get support for the following Fujitsu
	  Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
363 364
	  Heimdall, Heracles, Hades and Syleus including support for the
	  integrated watchdog.
365

366 367 368
	  This is a merged driver for FSC sensor chips replacing the fscpos,
	  fscscy and fscher drivers and adding support for several other FSC
	  sensor chips.
369 370 371 372

	  This driver can also be built as a module.  If so, the module
	  will be called fschmd.

373 374 375 376 377 378 379 380 381 382
config SENSORS_G760A
	tristate "GMT G760A"
	depends on I2C
	help
	  If you say yes here you get support for Global Mixed-mode
	  Technology Inc G760A fan speed PWM controller chips.

	  This driver can also be built as a module.  If so, the module
	  will be called g760a.

383 384
config SENSORS_GL518SM
	tristate "Genesys Logic GL518SM"
J
Jan Engelhardt 已提交
385
	depends on I2C
386 387 388 389 390 391 392 393 394
	help
	  If you say yes here you get support for Genesys Logic GL518SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl518sm.

config SENSORS_GL520SM
	tristate "Genesys Logic GL520SM"
J
Jan Engelhardt 已提交
395
	depends on I2C
396
	select HWMON_VID
397 398 399 400 401 402 403
	help
	  If you say yes here you get support for Genesys Logic GL520SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl520sm.

S
Simon Guinot 已提交
404 405 406 407 408 409 410 411 412
config SENSORS_GPIO_FAN
	tristate "GPIO fan"
	depends on GENERIC_GPIO
	help
	  If you say yes here you get support for fans connected to GPIO lines.

	  This driver can also be built as a module.  If so, the module
	  will be called gpio-fan.

R
Rudolf Marek 已提交
413
config SENSORS_CORETEMP
414
	tristate "Intel Core/Core2/Atom temperature sensor"
415
	depends on X86 && PCI && EXPERIMENTAL
R
Rudolf Marek 已提交
416 417
	help
	  If you say yes here you get support for the temperature
418
	  sensor inside your CPU. Most of the family 6 CPUs
419
	  are supported. Check Documentation/hwmon/coretemp for details.
R
Rudolf Marek 已提交
420

421 422 423 424 425 426 427 428 429
config SENSORS_IBMAEM
	tristate "IBM Active Energy Manager temperature/power sensors and control"
	select IPMI_SI
	depends on IPMI_HANDLER
	help
	  If you say yes here you get support for the temperature and
	  power sensors and capping hardware in various IBM System X
	  servers that support Active Energy Manager.  This includes
	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
430
	  and certain HC10/HS2x/LS2x/QS2x blades.
431 432 433 434

	  This driver can also be built as a module.  If so, the module
	  will be called ibmaem.

D
Darrick J. Wong 已提交
435 436 437 438 439 440 441
config SENSORS_IBMPEX
	tristate "IBM PowerExecutive temperature/power sensors"
	select IPMI_SI
	depends on IPMI_HANDLER
	help
	  If you say yes here you get support for the temperature and
	  power sensors in various IBM System X servers that support
442 443 444
	  PowerExecutive.  So far this includes the x3350, x3550, x3650,
	  x3655, and x3755; the x3800, x3850, and x3950 models that have
	  PCI Express; and some of the HS2x, LS2x, and QS2x blades.
D
Darrick J. Wong 已提交
445 446 447 448

	  This driver can also be built as a module.  If so, the module
	  will be called ibmpex.

449 450
config SENSORS_IT87
	tristate "ITE IT87xx and compatibles"
451
	select HWMON_VID
452
	help
J
Jean Delvare 已提交
453
	  If you say yes here you get support for ITE IT8705F, IT8712F,
454 455
	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
	  chips, and the SiS960 clone.
456 457 458 459

	  This driver can also be built as a module.  If so, the module
	  will be called it87.

460 461 462 463 464 465 466 467 468 469
config SENSORS_JZ4740
	tristate "Ingenic JZ4740 SoC ADC driver"
	depends on MACH_JZ4740 && MFD_JZ4740_ADC
	help
	  If you say yes here you get support for reading adc values from the ADCIN
	  pin on Ingenic JZ4740 SoC based boards.

	  This driver can also be build as a module. If so, the module will be
	  called jz4740-hwmon.

470
config SENSORS_JC42
471
	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
R
Randy Dunlap 已提交
472
	depends on I2C
473
	help
474 475 476 477 478
	  If you say yes here, you get support for JEDEC JC42.4 compliant
	  temperature sensors, which are used on many DDR3 memory modules for
	  mobile devices and servers.  Support will include, but not be limited
	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
479 480 481 482

	  This driver can also be built as a module.  If so, the module
	  will be called jc42.

483 484 485 486 487 488 489 490 491 492 493
config SENSORS_LINEAGE
	tristate "Lineage Compact Power Line Power Entry Module"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Lineage Compact Power Line
	  series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
	  CP2000DC, CP2725, and others.

	  This driver can also be built as a module.  If so, the module
	  will be called lineage-pem.

494
config SENSORS_LM63
495
	tristate "National Semiconductor LM63 and LM64"
J
Jan Engelhardt 已提交
496
	depends on I2C
497
	help
498 499 500 501 502
	  If you say yes here you get support for the National
	  Semiconductor LM63 and LM64 remote diode digital temperature
	  sensors with integrated fan control.  Such chips are found
	  on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
	  others.
503 504 505 506

	  This driver can also be built as a module.  If so, the module
	  will be called lm63.

507
config SENSORS_LM70
508
	tristate "National Semiconductor LM70 / Texas Instruments TMP121"
509
	depends on SPI_MASTER
510 511
	help
	  If you say yes here you get support for the National Semiconductor
512 513
	  LM70 and Texas Instruments TMP121/TMP123 digital temperature
	  sensor chips.
514 515 516 517

	  This driver can also be built as a module.  If so, the module
	  will be called lm70.

518 519 520 521 522 523 524 525 526
config SENSORS_LM73
	tristate "National Semiconductor LM73"
	depends on I2C
	help
	  If you say yes here you get support for National Semiconductor LM73
	  sensor chips.
	  This driver can also be built as a module.  If so, the module
	  will be called lm73.

527 528
config SENSORS_LM75
	tristate "National Semiconductor LM75 and compatibles"
J
Jan Engelhardt 已提交
529
	depends on I2C
530
	help
D
David Brownell 已提交
531 532 533 534 535 536
	  If you say yes here you get support for one common type of
	  temperature sensor chip, with models including:

		- Dallas Semiconductor DS75 and DS1775
		- Maxim MAX6625 and MAX6626
		- Microchip MCP980x
537
		- National Semiconductor LM75, LM75A
D
David Brownell 已提交
538 539 540
		- NXP's LM75A
		- ST Microelectronics STDS75
		- TelCom (now Microchip) TCN75
541 542
		- Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
		  TMP275
D
David Brownell 已提交
543

544 545 546 547 548 549
	  This driver supports driver model based binding through board
	  specific I2C device tables.

	  It also supports the "legacy" style of driver binding.  To use
	  that with some chips which don't replicate LM75 quirks exactly,
	  you may need the "force" module parameter.
550 551 552 553 554 555

	  This driver can also be built as a module.  If so, the module
	  will be called lm75.

config SENSORS_LM77
	tristate "National Semiconductor LM77"
J
Jan Engelhardt 已提交
556
	depends on I2C
557 558 559 560 561 562 563 564 565
	help
	  If you say yes here you get support for National Semiconductor LM77
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm77.

config SENSORS_LM78
	tristate "National Semiconductor LM78 and compatibles"
J
Jan Engelhardt 已提交
566
	depends on I2C
567
	select HWMON_VID
568 569 570 571 572 573 574 575 576
	help
	  If you say yes here you get support for National Semiconductor LM78,
	  LM78-J and LM79.

	  This driver can also be built as a module.  If so, the module
	  will be called lm78.

config SENSORS_LM80
	tristate "National Semiconductor LM80"
577
	depends on I2C
578 579 580 581 582 583 584 585
	help
	  If you say yes here you get support for National Semiconductor
	  LM80 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm80.

config SENSORS_LM83
J
Jordan Crouse 已提交
586
	tristate "National Semiconductor LM83 and compatibles"
J
Jan Engelhardt 已提交
587
	depends on I2C
588 589
	help
	  If you say yes here you get support for National Semiconductor
J
Jordan Crouse 已提交
590
	  LM82 and LM83 sensor chips.
591 592 593 594 595 596

	  This driver can also be built as a module.  If so, the module
	  will be called lm83.

config SENSORS_LM85
	tristate "National Semiconductor LM85 and compatibles"
597
	depends on I2C
598
	select HWMON_VID
599 600
	help
	  If you say yes here you get support for National Semiconductor LM85
601
	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
602
	  EMC6D101, EMC6D102, and EMC6D103.
603 604 605 606 607

	  This driver can also be built as a module.  If so, the module
	  will be called lm85.

config SENSORS_LM87
608
	tristate "National Semiconductor LM87 and compatibles"
J
Jan Engelhardt 已提交
609
	depends on I2C
610
	select HWMON_VID
611 612
	help
	  If you say yes here you get support for National Semiconductor LM87
613
	  and Analog Devices ADM1024 sensor chips.
614 615 616 617 618 619

	  This driver can also be built as a module.  If so, the module
	  will be called lm87.

config SENSORS_LM90
	tristate "National Semiconductor LM90 and compatibles"
J
Jan Engelhardt 已提交
620
	depends on I2C
621 622
	help
	  If you say yes here you get support for National Semiconductor LM90,
623 624 625
	  LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
	  Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
	  MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
626
	  Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
627 628 629 630 631 632

	  This driver can also be built as a module.  If so, the module
	  will be called lm90.

config SENSORS_LM92
	tristate "National Semiconductor LM92 and compatibles"
J
Jan Engelhardt 已提交
633
	depends on I2C
634 635 636 637 638 639 640
	help
	  If you say yes here you get support for National Semiconductor LM92
	  and Maxim MAX6635 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm92.

H
Hans-Jürgen Koch 已提交
641 642
config SENSORS_LM93
	tristate "National Semiconductor LM93 and compatibles"
J
Jean Delvare 已提交
643
	depends on I2C
H
Hans-Jürgen Koch 已提交
644 645
	select HWMON_VID
	help
646 647
	  If you say yes here you get support for National Semiconductor LM93,
	  LM94, and compatible sensor chips.
H
Hans-Jürgen Koch 已提交
648 649 650 651

	  This driver can also be built as a module.  If so, the module
	  will be called lm93.

652 653 654 655 656 657 658 659 660 661 662
config SENSORS_LTC4151
	tristate "Linear Technology LTC4151"
	depends on I2C
	default n
	help
	  If you say yes here you get support for Linear Technology LTC4151
	  High Voltage I2C Current and Voltage Monitor interface.

	  This driver can also be built as a module. If so, the module will
	  be called ltc4151.

I
Ira Snyder 已提交
663 664 665 666 667 668 669 670 671 672 673
config SENSORS_LTC4215
	tristate "Linear Technology LTC4215"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for Linear Technology LTC4215
	  Hot Swap Controller I2C interface.

	  This driver can also be built as a module. If so, the module will
	  be called ltc4215.

I
Ira Snyder 已提交
674 675 676 677 678 679 680 681 682 683 684
config SENSORS_LTC4245
	tristate "Linear Technology LTC4245"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for Linear Technology LTC4245
	  Multiple Supply Hot Swap Controller I2C interface.

	  This driver can also be built as a module. If so, the module will
	  be called ltc4245.

685 686 687 688 689 690 691 692 693 694 695
config SENSORS_LTC4261
	tristate "Linear Technology LTC4261"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for Linear Technology LTC4261
	  Negative Voltage Hot Swap Controller I2C interface.

	  This driver can also be built as a module. If so, the module will
	  be called ltc4261.

D
Davide Rizzo 已提交
696 697 698 699 700 701 702 703 704
config SENSORS_LM95241
	tristate "National Semiconductor LM95241 sensor chip"
	depends on I2C
	help
	  If you say yes here you get support for LM95241 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called lm95241.

705 706 707 708 709 710 711 712 713
config SENSORS_MAX1111
	tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
	depends on SPI_MASTER
	help
	  Say y here to support Maxim's MAX1111 ADC chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max1111.

714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729
config SENSORS_MAX16065
	tristate "Maxim MAX16065 System Manager and compatibles"
	depends on I2C
	help
	  If you say yes here you get support for hardware monitoring
	  capabilities of the following Maxim System Manager chips.
	    MAX16065
	    MAX16066
	    MAX16067
	    MAX16068
	    MAX16070
	    MAX16071

	  This driver can also be built as a module.  If so, the module
	  will be called max16065.

730 731
config SENSORS_MAX1619
	tristate "Maxim MAX1619 sensor chip"
J
Jan Engelhardt 已提交
732
	depends on I2C
733 734 735 736 737 738
	help
	  If you say yes here you get support for MAX1619 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called max1619.

D
David George 已提交
739 740 741 742 743 744 745 746 747 748
config SENSORS_MAX1668
	tristate "Maxim MAX1668 and compatibles"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for MAX1668, MAX1989 and
	  MAX1805 chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max1668.

749 750 751 752 753 754 755 756 757 758
config SENSORS_MAX6639
	tristate "Maxim MAX6639 sensor chip"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the MAX6639
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max6639.

P
Per Dalén 已提交
759 760 761 762 763 764 765 766 767 768 769
config SENSORS_MAX6642
	tristate "Maxim MAX6642 sensor chip"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for MAX6642 sensor chip.
	  MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
	  with Overtemperature Alarm from Maxim.

	  This driver can also be built as a module.  If so, the module
	  will be called max6642.

H
Hans-Juergen Koch 已提交
770 771
config SENSORS_MAX6650
	tristate "Maxim MAX6650 sensor chip"
J
Jan Engelhardt 已提交
772
	depends on I2C && EXPERIMENTAL
H
Hans-Juergen Koch 已提交
773 774 775 776 777 778 779
	help
	  If you say yes here you get support for the MAX6650 / MAX6651
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max6650.

D
Donggeun Kim 已提交
780 781 782 783 784 785 786 787 788 789 790 791 792 793
config SENSORS_NTC_THERMISTOR
	tristate "NTC thermistor support"
	depends on EXPERIMENTAL
	help
	  This driver supports NTC thermistors sensor reading and its
	  interpretation. The driver can also monitor the temperature and
	  send notifications about the temperature.

	  Currently, this driver supports
	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.

	  This driver can also be built as a module.  If so, the module
	  will be called ntc-thermistor.

794 795
config SENSORS_PC87360
	tristate "National Semiconductor PC87360 family"
796
	select HWMON_VID
797 798 799 800 801 802 803 804 805 806
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC8736x Super-I/O chips.
	  The PC87360, PC87363 and PC87364 only have fan monitoring and
	  control.  The PC87365 and PC87366 additionally have voltage and
	  temperature monitoring.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87360.

807 808 809 810 811 812 813
config SENSORS_PC87427
	tristate "National Semiconductor PC87427"
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC87427 Super-I/O chip.
	  The chip has two distinct logical devices, one for fan speed
	  monitoring and control, and one for voltage and temperature
814 815
	  monitoring. Fan speed monitoring and control are supported, as
	  well as temperature monitoring. Voltages aren't supported yet.
816 817 818 819

	  This driver can also be built as a module.  If so, the module
	  will be called pc87427.

J
Jean Delvare 已提交
820 821 822 823 824 825 826 827 828 829 830 831 832 833
config SENSORS_PCF8591
	tristate "Philips PCF8591 ADC/DAC"
	depends on I2C
	default n
	help
	  If you say yes here you get support for Philips PCF8591 4-channel
	  ADC, 1-channel DAC chips.

	  This driver can also be built as a module.  If so, the module
	  will be called pcf8591.

	  These devices are hard to detect and rarely found on mainstream
	  hardware.  If unsure, say N.

G
Guenter Roeck 已提交
834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856
config PMBUS
	tristate "PMBus support"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  Say yes here if you want to enable PMBus support.

	  This driver can also be built as a module. If so, the module will
	  be called pmbus_core.

if PMBUS

config SENSORS_PMBUS
	tristate "Generic PMBus devices"
	default n
	help
	  If you say yes here you get hardware monitoring support for generic
	  PMBus devices, including but not limited to BMR450, BMR451, BMR453,
	  BMR454, and LTC2978.

	  This driver can also be built as a module. If so, the module will
	  be called pmbus.

857 858 859 860 861 862 863 864 865 866
config SENSORS_ADM1275
	tristate "Analog Devices ADM1275"
	default n
	help
	  If you say yes here you get hardware monitoring support for Analog
	  Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.

	  This driver can also be built as a module. If so, the module will
	  be called adm1275.

867 868 869 870 871 872 873 874 875 876
config SENSORS_MAX16064
	tristate "Maxim MAX16064"
	default n
	help
	  If you say yes here you get hardware monitoring support for Maxim
	  MAX16064.

	  This driver can also be built as a module. If so, the module will
	  be called max16064.

877 878 879 880 881 882 883 884 885 886
config SENSORS_MAX34440
	tristate "Maxim MAX34440/MAX34441"
	default n
	help
	  If you say yes here you get hardware monitoring support for Maxim
	  MAX34440 and MAX34441.

	  This driver can also be built as a module. If so, the module will
	  be called max34440.

887 888 889 890 891 892 893 894 895 896
config SENSORS_MAX8688
	tristate "Maxim MAX8688"
	default n
	help
	  If you say yes here you get hardware monitoring support for Maxim
	  MAX8688.

	  This driver can also be built as a module. If so, the module will
	  be called max8688.

897 898 899 900 901 902 903 904 905 906 907
config SENSORS_UCD9000
	tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
	default n
	help
	  If you say yes here you get hardware monitoring support for TI
	  UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
	  Controllers.

	  This driver can also be built as a module. If so, the module will
	  be called ucd9000.

908 909 910 911 912
config SENSORS_UCD9200
	tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
	default n
	help
	  If you say yes here you get hardware monitoring support for TI
913 914
	  UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
	  Digital PWM System Controllers.
915 916 917 918

	  This driver can also be built as a module. If so, the module will
	  be called ucd9200.

G
Guenter Roeck 已提交
919 920
endif # PMBUS

921 922 923 924 925 926 927 928 929 930
config SENSORS_SHT15
	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
	depends on GENERIC_GPIO
	help
	  If you say yes here you get support for the Sensiron SHT10, SHT11,
	  SHT15, SHT71, SHT75 humidity and temperature sensors.

	  This driver can also be built as a module.  If so, the module
	  will be called sht15.

931 932 933 934 935 936 937 938 939 940
config SENSORS_SHT21
	tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
	depends on I2C
	help
	  If you say yes here you get support for the Sensiron SHT21, SHT25
	  humidity and temperature sensors.

	  This driver can also be built as a module.  If so, the module
	  will be called sht21.

941
config SENSORS_S3C
942 943
	tristate "Samsung built-in ADC"
	depends on S3C_ADC
944 945
	help
	  If you say yes here you get support for the on-board ADCs of
946
	  the Samsung S3C24XX, S3C64XX and other series of SoC
947 948

	  This driver can also be built as a module. If so, the module
949
	  will be called s3c-hwmon.
950 951 952 953 954 955 956 957

config SENSORS_S3C_RAW
	bool "Include raw channel attributes in sysfs"
	depends on SENSORS_S3C
	help
	  Say Y here if you want to include raw copies of all the ADC
	  channels in sysfs.

958 959
config SENSORS_SIS5595
	tristate "Silicon Integrated Systems Corp. SiS5595"
960
	depends on PCI
961 962 963 964 965 966 967
	help
	  If you say yes here you get support for the integrated sensors in
	  SiS5595 South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called sis5595.

968 969 970 971 972 973 974 975 976 977 978 979 980 981 982
config SENSORS_SMM665
	tristate "Summit Microelectronics SMM665"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for the hardware monitoring
	  features of the Summit Microelectronics SMM665/SMM665B Six-Channel
	  Active DC Output Controller / Monitor.

	  Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
	  Support for those chips is untested.

	  This driver can also be built as a module. If so, the module will
	  be called smm665.

J
Juerg Haefliger 已提交
983
config SENSORS_DME1737
984
	tristate "SMSC DME1737, SCH311x and compatibles"
J
Juerg Haefliger 已提交
985 986 987 988
	depends on I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for the hardware monitoring
989 990
	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
	  Asus A8000 Super-I/O chips.
J
Juerg Haefliger 已提交
991 992 993 994

	  This driver can also be built as a module.  If so, the module
	  will be called dme1737.

995
config SENSORS_EMC1403
996
	tristate "SMSC EMC1403/23 thermal sensor"
997 998
	depends on I2C
	help
999
	  If you say yes here you get support for the SMSC EMC1403/23
1000 1001 1002 1003 1004
	  temperature monitoring chip.

	  Threshold values can be configured using sysfs.
	  Data from the different diodes are accessible via sysfs.

1005 1006 1007 1008 1009 1010 1011 1012 1013 1014
config SENSORS_EMC2103
	tristate "SMSC EMC2103"
	depends on I2C
	help
	  If you say yes here you get support for the temperature
	  and fan sensors of the SMSC EMC2103 chips.

	  This driver can also be built as a module.  If so, the module
	  will be called emc2103.

1015 1016 1017 1018 1019 1020 1021 1022 1023 1024
config SENSORS_EMC6W201
	tristate "SMSC EMC6W201"
	depends on I2C
	help
	  If you say yes here you get support for the SMSC EMC6W201
	  hardware monitoring chip.

	  This driver can also be built as a module.  If so, the module
	  will be called emc6w201.

1025 1026 1027 1028 1029
config SENSORS_SMSC47M1
	tristate "SMSC LPC47M10x and compatibles"
	help
	  If you say yes here you get support for the integrated fan
	  monitoring and control capabilities of the SMSC LPC47B27x,
1030
	  LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
1031
	  LPC47M192, LPC47M292 and LPC47M997 chips.
1032

1033 1034 1035 1036
	  The temperature and voltage sensor features of the LPC47M15x,
	  LPC47M192, LPC47M292 and LPC47M997 are supported by another
	  driver, select also "SMSC LPC47M192 and compatibles" below for
	  those.
1037 1038 1039 1040

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m1.

1041 1042
config SENSORS_SMSC47M192
	tristate "SMSC LPC47M192 and compatibles"
1043
	depends on I2C
1044 1045 1046
	select HWMON_VID
	help
	  If you say yes here you get support for the temperature and
1047 1048
	  voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
	  and LPC47M997 chips.
1049 1050 1051 1052 1053 1054 1055 1056 1057

	  The fan monitoring and control capabilities of these chips
	  are supported by another driver, select
	  "SMSC LPC47M10x and compatibles" above. You need both drivers
	  if you want fan control and voltage/temperature sensor support.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m192.

1058 1059
config SENSORS_SMSC47B397
	tristate "SMSC LPC47B397-NC"
J
Jan Engelhardt 已提交
1060
	depends on EXPERIMENTAL
1061 1062 1063 1064 1065 1066 1067
	help
	  If you say yes here you get support for the SMSC LPC47B397-NC
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47b397.

1068 1069 1070 1071 1072 1073 1074 1075 1076
config SENSORS_SCH5627
	tristate "SMSC SCH5627"
	help
	  If you say yes here you get support for the hardware monitoring
	  features of the SMSC SCH5627 Super-I/O chip.

	  This driver can also be built as a module.  If so, the module
	  will be called sch5627.

1077 1078 1079 1080 1081 1082 1083 1084 1085 1086
config SENSORS_ADS1015
	tristate "Texas Instruments ADS1015"
	depends on I2C
	help
	  If you say yes here you get support for Texas Instruments ADS1015
	  12-bit 4-input ADC device.

	  This driver can also be built as a module.  If so, the module
	  will be called ads1015.

1087 1088 1089 1090 1091 1092 1093 1094 1095 1096
config SENSORS_ADS7828
	tristate "Texas Instruments ADS7828"
	depends on I2C
	help
	  If you say yes here you get support for Texas Instruments ADS7828
	  12-bit 8-channel ADC device.

	  This driver can also be built as a module.  If so, the module
	  will be called ads7828.

1097 1098 1099 1100 1101 1102 1103 1104 1105
config SENSORS_ADS7871
	tristate "Texas Instruments ADS7871 A/D converter"
	depends on SPI
	help
	  If you say yes here you get support for TI ADS7871 & ADS7870

	  This driver can also be built as a module.  If so, the module
	  will be called ads7871.

1106 1107 1108 1109 1110 1111 1112 1113 1114 1115
config SENSORS_AMC6821
	tristate "Texas Instruments AMC6821"
	depends on I2C  && EXPERIMENTAL
	help
	  If you say yes here you get support for the Texas Instruments
	  AMC6821 hardware monitoring chips.

	  This driver can also be build as a module.  If so, the module
	  will be called amc6821.

1116 1117
config SENSORS_THMC50
	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
1118
	depends on I2C
1119 1120 1121 1122 1123 1124 1125
	help
	  If you say yes here you get support for Texas Instruments THMC50
	  sensor chips and clones: the Analog Devices ADM1022.

	  This driver can also be built as a module.  If so, the module
	  will be called thmc50.

1126
config SENSORS_TMP102
J
Jean Delvare 已提交
1127
	tristate "Texas Instruments TMP102"
1128 1129 1130 1131 1132 1133 1134 1135
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Texas Instruments TMP102
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called tmp102.

1136 1137 1138 1139 1140 1141 1142 1143 1144 1145
config SENSORS_TMP401
	tristate "Texas Instruments TMP401 and compatibles"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Texas Instruments TMP401 and
	  TMP411 temperature sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called tmp401.

1146 1147 1148 1149 1150 1151 1152 1153 1154 1155
config SENSORS_TMP421
	tristate "Texas Instruments TMP421 and compatible"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Texas Instruments TMP421,
	  TMP422 and TMP423 temperature sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called tmp421.

1156 1157 1158 1159 1160 1161 1162 1163 1164 1165
config SENSORS_TWL4030_MADC
	tristate "Texas Instruments TWL4030 MADC Hwmon"
	depends on TWL4030_MADC
	help
	If you say yes here you get hwmon support for triton
	TWL4030-MADC.

	This driver can also be built as a module. If so it will be called
	twl4030-madc-hwmon.

1166 1167 1168 1169 1170 1171 1172 1173
config SENSORS_VIA_CPUTEMP
	tristate "VIA CPU temperature sensor"
	depends on X86
	help
	  If you say yes here you get support for the temperature
	  sensor inside your CPU. Supported are all known variants of
	  the VIA C7 and Nano.

1174 1175
config SENSORS_VIA686A
	tristate "VIA686A"
1176
	depends on PCI
1177 1178 1179 1180 1181 1182 1183
	help
	  If you say yes here you get support for the integrated sensors in
	  Via 686A/B South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called via686a.

1184 1185 1186 1187 1188 1189 1190 1191 1192 1193
config SENSORS_VT1211
	tristate "VIA VT1211"
	select HWMON_VID
	help
	  If you say yes here then you get support for hardware monitoring
	  features of the VIA VT1211 Super-I/O chip.

	  This driver can also be built as a module.  If so, the module
	  will be called vt1211.

R
Roger Lucas 已提交
1194
config SENSORS_VT8231
1195
	tristate "VIA VT8231"
1196
	depends on PCI
R
Roger Lucas 已提交
1197 1198 1199 1200 1201 1202 1203 1204
	select HWMON_VID
	help
	  If you say yes here then you get support for the integrated sensors
	  in the VIA VT8231 device.

	  This driver can also be built as a module.  If so, the module
	  will be called vt8231.

1205
config SENSORS_W83781D
1206
	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
J
Jan Engelhardt 已提交
1207
	depends on I2C
1208
	select HWMON_VID
1209 1210
	help
	  If you say yes here you get support for the Winbond W8378x series
1211 1212
	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
	  Asus AS99127F.
1213 1214 1215 1216

	  This driver can also be built as a module.  If so, the module
	  will be called w83781d.

1217 1218
config SENSORS_W83791D
	tristate "Winbond W83791D"
1219
	depends on I2C
1220 1221 1222 1223 1224 1225 1226
	select HWMON_VID
	help
	  If you say yes here you get support for the Winbond W83791D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83791d.

1227 1228
config SENSORS_W83792D
	tristate "Winbond W83792D"
1229
	depends on I2C
1230 1231 1232 1233 1234 1235
	help
	  If you say yes here you get support for the Winbond W83792D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83792d.

1236 1237
config SENSORS_W83793
	tristate "Winbond W83793"
J
Jan Engelhardt 已提交
1238
	depends on I2C && EXPERIMENTAL
1239
	select HWMON_VID
1240 1241
	help
	  If you say yes here you get support for the Winbond W83793
1242 1243
	  hardware monitoring chip, including support for the integrated
	  watchdog.
1244 1245 1246 1247

	  This driver can also be built as a module.  If so, the module
	  will be called w83793.

1248 1249 1250 1251 1252 1253 1254 1255 1256 1257
config SENSORS_W83795
	tristate "Winbond/Nuvoton W83795G/ADG"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83795G and
	  W83795ADG hardware monitoring chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83795.

1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274
config SENSORS_W83795_FANCTRL
	boolean "Include fan control support (DANGEROUS)"
	depends on SENSORS_W83795 && EXPERIMENTAL
	default n
	help
	  If you say yes here, support for the both manual and automatic
	  fan control features will be included in the driver.

	  This part of the code wasn't carefully reviewed and tested yet,
	  so enabling this option is strongly discouraged on production
	  servers. Only developers and testers should enable it for the
	  time being.

	  Please also note that this option will create sysfs attribute
	  files which may change in the future, so you shouldn't rely
	  on them being stable.

1275 1276
config SENSORS_W83L785TS
	tristate "Winbond W83L785TS-S"
J
Jan Engelhardt 已提交
1277
	depends on I2C && EXPERIMENTAL
1278 1279 1280 1281 1282 1283 1284 1285
	help
	  If you say yes here you get support for the Winbond W83L785TS-S
	  sensor chip, which is used on the Asus A7N8X, among other
	  motherboards.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l785ts.

1286 1287 1288 1289 1290 1291 1292 1293 1294 1295
config SENSORS_W83L786NG
	tristate "Winbond W83L786NG, W83L786NR"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83L786NG
	  and W83L786NR sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l786ng.

1296
config SENSORS_W83627HF
1297
	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1298
	select HWMON_VID
1299 1300
	help
	  If you say yes here you get support for the Winbond W836X7 series
1301 1302
	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
	  W83697HF.
1303 1304 1305 1306 1307

	  This driver can also be built as a module.  If so, the module
	  will be called w83627hf.

config SENSORS_W83627EHF
1308
	tristate "Winbond W83627EHF/EHG/DHG, W83667HG, NCT6775F, NCT6776F"
1309
	select HWMON_VID
1310
	help
1311
	  If you say yes here you get support for the hardware
1312 1313
	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.

1314
	  This driver also supports the W83627EHG, which is the lead-free
1315 1316 1317
	  version of the W83627EHF, and the W83627DHG, which is a similar
	  chip suited for specific Intel processors that use PECI such as
	  the Core 2 Duo.
1318

1319 1320
	  This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F
	  (also known as W83667HG-I), and NCT6776F.
1321

1322 1323 1324
	  This driver can also be built as a module.  If so, the module
	  will be called w83627ehf.

1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335
config SENSORS_WM831X
	tristate "WM831x PMICs"
	depends on MFD_WM831X
	help
	  If you say yes here you get support for the hardware
	  monitoring functionality of the Wolfson Microelectronics
	  WM831x series of PMICs.

	  This driver can also be built as a module.  If so, the module
	  will be called wm831x-hwmon.

1336 1337 1338 1339 1340 1341 1342 1343 1344
config SENSORS_WM8350
	tristate "Wolfson Microelectronics WM835x"
	depends on MFD_WM8350
	help
	  If you say yes here you get support for the hardware
	  monitoring features of the WM835x series of PMICs.

	  This driver can also be built as a module.  If so, the module
	  will be called wm8350-hwmon.
1345

1346 1347 1348 1349 1350 1351 1352
config SENSORS_ULTRA45
	tristate "Sun Ultra45 PIC16F747"
	depends on SPARC64
	help
	  This driver provides support for the Ultra45 workstation environmental
	  sensors.

1353 1354
config SENSORS_APPLESMC
	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1355
	depends on INPUT && X86
1356 1357
	select NEW_LEDS
	select LEDS_CLASS
1358
	select INPUT_POLLDEV
1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377
	default n
	help
	  This driver provides support for the Apple System Management
	  Controller, which provides an accelerometer (Apple Sudden Motion
	  Sensor), light sensors, temperature sensors, keyboard backlight
	  control and fan control.

	  Only Intel-based Apple's computers are supported (MacBook Pro,
	  MacBook, MacMini).

	  Data from the different sensors, keyboard backlight control and fan
	  control are accessible via sysfs.

	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.

	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of applesmc.

1378 1379 1380 1381 1382 1383
config SENSORS_MC13783_ADC
        tristate "Freescale MC13783 ADC"
        depends on MFD_MC13783
        help
          Support for the A/D converter on MC13783 PMIC.

1384 1385 1386 1387
if ACPI

comment "ACPI drivers"

1388 1389 1390 1391 1392 1393 1394 1395 1396 1397
config SENSORS_ACPI_POWER
	tristate "ACPI 4.0 power meter"
	help
	  This driver exposes ACPI 4.0 power meters as hardware monitoring
	  devices.  Say Y (or M) if you have a computer with ACPI 4.0 firmware
	  and a power meter.

	  To compile this driver as a module, choose M here:
	  the module will be called acpi_power_meter.

1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410
config SENSORS_ATK0110
	tristate "ASUS ATK0110"
	depends on X86 && EXPERIMENTAL
	help
	  If you say yes here you get support for the ACPI hardware
	  monitoring interface found in many ASUS motherboards. This
	  driver will provide readings of fans, voltages and temperatures
	  through the system firmware.

	  This driver can also be built as a module. If so, the module
	  will be called asus_atk0110.

endif # ACPI
1411

J
Jan Engelhardt 已提交
1412
endif # HWMON