提交 83bffbce 编写于 作者: P Per Dalén 提交者: Guenter Roeck

hwmon: Add support for MAX6642

MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor with
Overtemperature Alarm from Maxim.
Signed-off-by: NPer Dalen <per.dalen@appeartv.com>
Signed-off-by: NGuenter Roeck <guenter.roeck@ericsson.com>
上级 61c4f2c8
Kernel driver max6642
=====================
Supported chips:
* Maxim MAX6642
Prefix: 'max6642'
Addresses scanned: I2C 0x48-0x4f
Datasheet: Publicly available at the Maxim website
http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf
Authors:
Per Dalen <per.dalen@appeartv.com>
Description
-----------
The MAX6642 is a digital temperature sensor. It senses its own temperature as
well as the temperature on one external diode.
All temperature values are given in degrees Celsius. Resolution
is 0.25 degree for the local temperature and for the remote temperature.
......@@ -727,6 +727,17 @@ config SENSORS_MAX6639
This driver can also be built as a module. If so, the module
will be called max6639.
config SENSORS_MAX6642
tristate "Maxim MAX6642 sensor chip"
depends on I2C && EXPERIMENTAL
help
If you say yes here you get support for MAX6642 sensor chip.
MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor
with Overtemperature Alarm from Maxim.
This driver can also be built as a module. If so, the module
will be called max6642.
config SENSORS_MAX6650
tristate "Maxim MAX6650 sensor chip"
depends on I2C && EXPERIMENTAL
......
......@@ -85,6 +85,7 @@ obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o
obj-$(CONFIG_SENSORS_MAX1111) += max1111.o
obj-$(CONFIG_SENSORS_MAX1619) += max1619.o
obj-$(CONFIG_SENSORS_MAX6639) += max6639.o
obj-$(CONFIG_SENSORS_MAX6642) += max6642.o
obj-$(CONFIG_SENSORS_MAX6650) += max6650.o
obj-$(CONFIG_SENSORS_MC13783_ADC)+= mc13783-adc.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
......
/*
* Driver for +/-1 degree C, SMBus-Compatible Remote/Local Temperature Sensor
* with Overtemperature Alarm
*
* Copyright (C) 2011 AppearTV AS
*
* Derived from:
*
* Based on the max1619 driver.
* Copyright (C) 2003-2004 Alexey Fisher <fishor@mail.ru>
* Jean Delvare <khali@linux-fr.org>
*
* The MAX6642 is a sensor chip made by Maxim.
* It reports up to two temperatures (its own plus up to
* one external one). Complete datasheet can be
* obtained from Maxim's website at:
* http://datasheets.maxim-ic.com/en/ds/MAX6642.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
static const unsigned short normal_i2c[] = {
0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/*
* The MAX6642 registers
*/
#define MAX6642_REG_R_MAN_ID 0xFE
#define MAX6642_REG_R_CONFIG 0x03
#define MAX6642_REG_W_CONFIG 0x09
#define MAX6642_REG_R_STATUS 0x02
#define MAX6642_REG_R_LOCAL_TEMP 0x00
#define MAX6642_REG_R_LOCAL_TEMPL 0x11
#define MAX6642_REG_R_LOCAL_HIGH 0x05
#define MAX6642_REG_W_LOCAL_HIGH 0x0B
#define MAX6642_REG_R_REMOTE_TEMP 0x01
#define MAX6642_REG_R_REMOTE_TEMPL 0x10
#define MAX6642_REG_R_REMOTE_HIGH 0x07
#define MAX6642_REG_W_REMOTE_HIGH 0x0D
/*
* Conversions
*/
static int temp_from_reg10(int val)
{
return val * 250;
}
static int temp_from_reg(int val)
{
return val * 1000;
}
static int temp_to_reg(int val)
{
return val / 1000;
}
/*
* Client data (each client gets its own)
*/
struct max6642_data {
struct device *hwmon_dev;
struct mutex update_lock;
bool valid; /* zero until following fields are valid */
unsigned long last_updated; /* in jiffies */
/* registers values */
u16 temp_input[2]; /* local/remote */
u16 temp_high[2]; /* local/remote */
u8 alarms;
};
/*
* Real code
*/
static void max6642_init_client(struct i2c_client *client)
{
u8 config;
struct max6642_data *data = i2c_get_clientdata(client);
/*
* Start the conversions.
*/
config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG);
if (config & 0x40)
i2c_smbus_write_byte_data(client, MAX6642_REG_W_CONFIG,
config & 0xBF); /* run */
data->temp_high[0] = i2c_smbus_read_byte_data(client,
MAX6642_REG_R_LOCAL_HIGH);
data->temp_high[1] = i2c_smbus_read_byte_data(client,
MAX6642_REG_R_REMOTE_HIGH);
}
/* Return 0 if detection is successful, -ENODEV otherwise */
static int max6642_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
u8 reg_config, reg_status, man_id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
/* identification */
man_id = i2c_smbus_read_byte_data(client, MAX6642_REG_R_MAN_ID);
if (man_id != 0x4D)
return -ENODEV;
/*
* We read the config and status register, the 4 lower bits in the
* config register should be zero and bit 5, 3, 1 and 0 should be
* zero in the status register.
*/
reg_config = i2c_smbus_read_byte_data(client, MAX6642_REG_R_CONFIG);
reg_status = i2c_smbus_read_byte_data(client, MAX6642_REG_R_STATUS);
if (((reg_config & 0x0f) != 0x00) ||
((reg_status & 0x2b) != 0x00))
return -ENODEV;
strlcpy(info->type, "max6642", I2C_NAME_SIZE);
return 0;
}
static struct max6642_data *max6642_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct max6642_data *data = i2c_get_clientdata(client);
u16 val, tmp;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
dev_dbg(&client->dev, "Updating max6642 data.\n");
val = i2c_smbus_read_byte_data(client,
MAX6642_REG_R_LOCAL_TEMPL);
tmp = (val >> 6) & 3;
val = i2c_smbus_read_byte_data(client,
MAX6642_REG_R_LOCAL_TEMP);
val = (val << 2) | tmp;
data->temp_input[0] = val;
val = i2c_smbus_read_byte_data(client,
MAX6642_REG_R_REMOTE_TEMPL);
tmp = (val >> 6) & 3;
val = i2c_smbus_read_byte_data(client,
MAX6642_REG_R_REMOTE_TEMP);
val = (val << 2) | tmp;
data->temp_input[1] = val;
data->alarms = i2c_smbus_read_byte_data(client,
MAX6642_REG_R_STATUS);
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
/*
* Sysfs stuff
*/
static ssize_t show_temp_max10(struct device *dev,
struct device_attribute *dev_attr, char *buf)
{
struct max6642_data *data = max6642_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(dev_attr);
return sprintf(buf, "%d\n",
temp_from_reg10(data->temp_input[attr->index]));
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct max6642_data *data = max6642_update_device(dev);
struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
return sprintf(buf, "%d\n", temp_from_reg(data->temp_high[attr2->nr]));
}
static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long val;
int err;
struct i2c_client *client = to_i2c_client(dev);
struct max6642_data *data = i2c_get_clientdata(client);
struct sensor_device_attribute_2 *attr2 = to_sensor_dev_attr_2(attr);
err = strict_strtoul(buf, 10, &val);
if (err < 0)
return err;
mutex_lock(&data->update_lock);
data->temp_high[attr2->nr] = SENSORS_LIMIT(temp_to_reg(val), 0, 255);
i2c_smbus_write_byte_data(client, attr2->index,
data->temp_high[attr2->nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
char *buf)
{
int bitnr = to_sensor_dev_attr(attr)->index;
struct max6642_data *data = max6642_update_device(dev);
return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
}
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_max10, NULL, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_max10, NULL, 1);
static SENSOR_DEVICE_ATTR_2(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
set_temp_max, 0, MAX6642_REG_W_LOCAL_HIGH);
static SENSOR_DEVICE_ATTR_2(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
set_temp_max, 1, MAX6642_REG_W_REMOTE_HIGH);
static SENSOR_DEVICE_ATTR(temp_fault, S_IRUGO, show_alarm, NULL, 2);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6);
static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4);
static struct attribute *max6642_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp_fault.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
NULL
};
static const struct attribute_group max6642_group = {
.attrs = max6642_attributes,
};
static int max6642_probe(struct i2c_client *new_client,
const struct i2c_device_id *id)
{
struct max6642_data *data;
int err;
data = kzalloc(sizeof(struct max6642_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
i2c_set_clientdata(new_client, data);
mutex_init(&data->update_lock);
/* Initialize the MAX6642 chip */
max6642_init_client(new_client);
/* Register sysfs hooks */
err = sysfs_create_group(&new_client->dev.kobj, &max6642_group);
if (err)
goto exit_free;
data->hwmon_dev = hwmon_device_register(&new_client->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove_files;
}
return 0;
exit_remove_files:
sysfs_remove_group(&new_client->dev.kobj, &max6642_group);
exit_free:
kfree(data);
exit:
return err;
}
static int max6642_remove(struct i2c_client *client)
{
struct max6642_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &max6642_group);
kfree(data);
return 0;
}
/*
* Driver data (common to all clients)
*/
static const struct i2c_device_id max6642_id[] = {
{ "max6642", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, max6642_id);
static struct i2c_driver max6642_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "max6642",
},
.probe = max6642_probe,
.remove = max6642_remove,
.id_table = max6642_id,
.detect = max6642_detect,
.address_list = normal_i2c,
};
static int __init max6642_init(void)
{
return i2c_add_driver(&max6642_driver);
}
static void __exit max6642_exit(void)
{
i2c_del_driver(&max6642_driver);
}
MODULE_AUTHOR("Per Dalen <per.dalen@appeartv.com>");
MODULE_DESCRIPTION("MAX6642 sensor driver");
MODULE_LICENSE("GPL");
module_init(max6642_init);
module_exit(max6642_exit);
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册