Kconfig 40.0 KB
Newer Older
1
#
2
# Hardware monitoring chip drivers configuration
3 4
#

J
Jan Engelhardt 已提交
5
menuconfig HWMON
6
	tristate "Hardware Monitoring support"
7
	depends on HAS_IOMEM
8 9 10 11 12 13
	default y
	help
	  Hardware monitoring devices let you monitor the hardware health
	  of a system. Most modern motherboards include such a device. It
	  can include temperature sensors, voltage sensors, fan speed
	  sensors and various additional features such as the ability to
14 15 16 17
	  control the speed of the fans.  If you want this support you
	  should say Y here and also to the specific driver(s) for your
	  sensors chip(s) below.

18 19 20 21
	  To find out which specific driver(s) you need, use the
	  sensors-detect script from the lm_sensors package.  Read
	  <file:Documentation/hwmon/userspace-tools> for details.

22 23
	  This support can also be built as a module.  If so, the module
	  will be called hwmon.
24

J
Jan Engelhardt 已提交
25 26
if HWMON

27 28 29 30
config HWMON_VID
	tristate
	default n

31 32 33 34 35 36 37 38 39 40 41
config HWMON_DEBUG_CHIP
	bool "Hardware Monitoring Chip debugging messages"
	default n
	help
	  Say Y here if you want the I2C chip drivers to produce a bunch of
	  debug messages to the system log.  Select this if you are having
	  a problem with I2C support and want to see more of what is going
	  on.

comment "Native drivers"

42
config SENSORS_ABITUGURU
43
	tristate "Abit uGuru (rev 1 & 2)"
J
Jean Delvare 已提交
44
	depends on X86 && EXPERIMENTAL
45
	help
46 47 48 49 50 51 52
	  If you say yes here you get support for the sensor part of the first
	  and second revision of the Abit uGuru chip. The voltage and frequency
	  control parts of the Abit uGuru are not supported. The Abit uGuru
	  chip can be found on Abit uGuru featuring motherboards (most modern
	  Abit motherboards from before end 2005). For more info and a list
	  of which motherboards have which revision see
	  Documentation/hwmon/abituguru
53 54 55 56

	  This driver can also be built as a module.  If so, the module
	  will be called abituguru.

57 58
config SENSORS_ABITUGURU3
	tristate "Abit uGuru (rev 3)"
J
Jean Delvare 已提交
59
	depends on X86 && EXPERIMENTAL
60 61 62 63 64 65 66 67 68 69 70
	help
	  If you say yes here you get support for the sensor part of the
	  third revision of the Abit uGuru chip. Only reading the sensors
	  and their settings is supported. The third revision of the Abit
	  uGuru chip can be found on recent Abit motherboards (since end
	  2005). For more info and a list of which motherboards have which
	  revision see Documentation/hwmon/abituguru3

	  This driver can also be built as a module.  If so, the module
	  will be called abituguru3.

S
Sean MacLennan 已提交
71 72 73 74 75 76 77 78 79 80
config SENSORS_AD7414
	tristate "Analog Devices AD7414"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  AD7414 temperature monitoring chip.

	  This driver can also be built as a module. If so, the module
	  will be called ad7414.

81 82
config SENSORS_AD7418
	tristate "Analog Devices AD7416, AD7417 and AD7418"
J
Jan Engelhardt 已提交
83
	depends on I2C && EXPERIMENTAL
84 85 86 87 88 89 90
	help
	  If you say yes here you get support for the Analog Devices
	  AD7416, AD7417 and AD7418 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called ad7418.

M
Marc Pignat 已提交
91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106
config SENSORS_ADCXX
	tristate "National Semiconductor ADCxxxSxxx"
	depends on SPI_MASTER && EXPERIMENTAL
	help
	  If you say yes here you get support for the National Semiconductor
	  ADC<bb><c>S<sss> chip family, where
	  * bb  is the resolution in number of bits (8, 10, 12)
	  * c   is the number of channels (1, 2, 4, 8)
	  * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500
	    kSPS and 101 for 1 MSPS)

	  Examples : ADC081S101, ADC124S501, ...

	  This driver can also be built as a module.  If so, the module
	  will be called adcxx.

107 108
config SENSORS_ADM1021
	tristate "Analog Devices ADM1021 and compatibles"
J
Jan Engelhardt 已提交
109
	depends on I2C
110 111 112 113 114 115 116 117 118 119 120
	help
	  If you say yes here you get support for Analog Devices ADM1021
	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	  and the XEON processor built-in sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1021.

config SENSORS_ADM1025
	tristate "Analog Devices ADM1025 and compatibles"
J
Jan Engelhardt 已提交
121
	depends on I2C
122
	select HWMON_VID
123 124 125 126 127 128 129 130 131
	help
	  If you say yes here you get support for Analog Devices ADM1025
	  and Philips NE1619 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1025.

config SENSORS_ADM1026
	tristate "Analog Devices ADM1026 and compatibles"
132
	depends on I2C
133
	select HWMON_VID
134 135 136 137 138 139 140
	help
	  If you say yes here you get support for Analog Devices ADM1026
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1026.

141 142
config SENSORS_ADM1029
	tristate "Analog Devices ADM1029"
143
	depends on I2C
144 145 146 147 148 149 150 151
	help
	  If you say yes here you get support for Analog Devices ADM1029
	  sensor chip.
	  Very rare chip, please let us know you use it.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1029.

152 153
config SENSORS_ADM1031
	tristate "Analog Devices ADM1031 and compatibles"
154
	depends on I2C
155 156 157 158 159 160 161 162 163
	help
	  If you say yes here you get support for Analog Devices ADM1031
	  and ADM1030 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1031.

config SENSORS_ADM9240
	tristate "Analog Devices ADM9240 and compatibles"
164
	depends on I2C
165
	select HWMON_VID
166 167 168 169 170 171 172
	help
	  If you say yes here you get support for Analog Devices ADM9240,
	  Dallas DS1780, National Semiconductor LM81 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm9240.

173 174 175 176 177 178 179 180 181 182
config SENSORS_ADT7411
	tristate "Analog Devices ADT7411"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7411 voltage and temperature monitoring chip.

	  This driver can also be built as a module. If so, the module
	  will be called adt7411.

D
Darrick J. Wong 已提交
183 184 185 186 187 188 189 190 191 192
config SENSORS_ADT7462
	tristate "Analog Devices ADT7462"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7462 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7462.

D
Darrick J. Wong 已提交
193 194 195 196 197 198 199 200 201 202
config SENSORS_ADT7470
	tristate "Analog Devices ADT7470"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7470 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7470.

203
config SENSORS_ADT7475
204
	tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490"
205
	depends on I2C
206
	select HWMON_VID
207 208
	help
	  If you say yes here you get support for the Analog Devices
209 210
	  ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring
	  chips.
211 212 213 214

	  This driver can also be build as a module.  If so, the module
	  will be called adt7475.

215 216 217 218 219
config SENSORS_ASC7621
	tristate "Andigilog aSC7621"
	depends on HWMON && I2C
	help
	  If you say yes here you get support for the aSC7621
220 221
	  family of SMBus sensors chip found on most Intel X38, X48, X58,
	  945, 965 and 975 desktop boards.  Currently supported chips:
222 223 224 225 226 227
	  aSC7621
	  aSC7621a

	  This driver can also be built as a module.  If so, the module
	  will be called asc7621.

R
Rudolf Marek 已提交
228
config SENSORS_K8TEMP
R
Rudolf Marek 已提交
229
	tristate "AMD Athlon64/FX or Opteron temperature sensor"
J
Jan Engelhardt 已提交
230
	depends on X86 && PCI && EXPERIMENTAL
R
Rudolf Marek 已提交
231 232
	help
	  If you say yes here you get support for the temperature
R
Rudolf Marek 已提交
233 234 235
	  sensor(s) inside your CPU. Supported is whole AMD K8
	  microarchitecture. Please note that you will need at least
	  lm-sensors 2.10.1 for proper userspace support.
R
Rudolf Marek 已提交
236 237 238 239

	  This driver can also be built as a module.  If so, the module
	  will be called k8temp.

240
config SENSORS_K10TEMP
241
	tristate "AMD Family 10h/11h/12h/14h temperature sensor"
242 243 244 245
	depends on X86 && PCI
	help
	  If you say yes here you get support for the temperature
	  sensor(s) inside your CPU. Supported are later revisions of
246 247
	  the AMD Family 10h and all revisions of the AMD Family 11h,
	  12h (Llano), and 14h (Brazos) microarchitectures.
248 249 250 251

	  This driver can also be built as a module.  If so, the module
	  will be called k10temp.

252 253
config SENSORS_ASB100
	tristate "Asus ASB100 Bach"
J
Jean Delvare 已提交
254
	depends on X86 && I2C && EXPERIMENTAL
255
	select HWMON_VID
256 257 258 259 260 261 262 263 264
	help
	  If you say yes here you get support for the ASB100 Bach sensor
	  chip found on some Asus mainboards.

	  This driver can also be built as a module.  If so, the module
	  will be called asb100.

config SENSORS_ATXP1
	tristate "Attansic ATXP1 VID controller"
J
Jan Engelhardt 已提交
265
	depends on I2C && EXPERIMENTAL
266
	select HWMON_VID
267 268 269 270 271 272 273 274 275 276
	help
	  If you say yes here you get support for the Attansic ATXP1 VID
	  controller.

	  If your board have such a chip, you are able to control your CPU
	  core and other voltages.

	  This driver can also be built as a module.  If so, the module
	  will be called atxp1.

277 278 279 280 281 282 283 284 285 286
config SENSORS_DS620
	tristate "Dallas Semiconductor DS620"
	depends on I2C
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS620 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called ds620.

287 288
config SENSORS_DS1621
	tristate "Dallas Semiconductor DS1621 and DS1625"
J
Jan Engelhardt 已提交
289
	depends on I2C
290 291 292 293 294 295 296
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1621 and DS1625 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1621.

297 298 299 300 301 302 303 304 305 306
config SENSORS_I5K_AMB
	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
	depends on PCI && EXPERIMENTAL
	help
	  If you say yes here you get support for FB-DIMM AMB temperature
	  monitoring chips on systems with the Intel 5000 series chipset.

	  This driver can also be built as a module. If so, the module
	  will be called i5k_amb.

J
Jean Delvare 已提交
307
config SENSORS_F71805F
308
	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
J
Jean Delvare 已提交
309 310
	help
	  If you say yes here you get support for hardware monitoring
311 312
	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
	  Super-I/O chips.
J
Jean Delvare 已提交
313 314 315 316

	  This driver can also be built as a module.  If so, the module
	  will be called f71805f.

317
config SENSORS_F71882FG
318
	tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000"
319
	help
320 321
	  If you say yes here you get support for hardware monitoring
	  features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG,
322
	  F71889FG and F8000 Super-I/O chips.
323 324 325 326

	  This driver can also be built as a module.  If so, the module
	  will be called f71882fg.

R
Riku Voipio 已提交
327
config SENSORS_F75375S
328 329
	tristate "Fintek F75375S/SP and F75373"
	depends on I2C
R
Riku Voipio 已提交
330 331 332 333 334 335 336
	help
	  If you say yes here you get support for hardware monitoring
	  features of the Fintek F75375S/SP and F75373

	  This driver can also be built as a module.  If so, the module
	  will be called f75375s.

337
config SENSORS_FSCHMD
338
	tristate "Fujitsu Siemens Computers sensor chips"
339
	depends on X86 && I2C
340
	help
341 342
	  If you say yes here you get support for the following Fujitsu
	  Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes,
343 344
	  Heimdall, Heracles, Hades and Syleus including support for the
	  integrated watchdog.
345

346 347 348
	  This is a merged driver for FSC sensor chips replacing the fscpos,
	  fscscy and fscher drivers and adding support for several other FSC
	  sensor chips.
349 350 351 352

	  This driver can also be built as a module.  If so, the module
	  will be called fschmd.

353 354 355 356 357 358 359 360 361 362
config SENSORS_G760A
	tristate "GMT G760A"
	depends on I2C
	help
	  If you say yes here you get support for Global Mixed-mode
	  Technology Inc G760A fan speed PWM controller chips.

	  This driver can also be built as a module.  If so, the module
	  will be called g760a.

363 364
config SENSORS_GL518SM
	tristate "Genesys Logic GL518SM"
J
Jan Engelhardt 已提交
365
	depends on I2C
366 367 368 369 370 371 372 373 374
	help
	  If you say yes here you get support for Genesys Logic GL518SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl518sm.

config SENSORS_GL520SM
	tristate "Genesys Logic GL520SM"
J
Jan Engelhardt 已提交
375
	depends on I2C
376
	select HWMON_VID
377 378 379 380 381 382 383
	help
	  If you say yes here you get support for Genesys Logic GL520SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl520sm.

S
Simon Guinot 已提交
384 385 386 387 388 389 390 391 392
config SENSORS_GPIO_FAN
	tristate "GPIO fan"
	depends on GENERIC_GPIO
	help
	  If you say yes here you get support for fans connected to GPIO lines.

	  This driver can also be built as a module.  If so, the module
	  will be called gpio-fan.

R
Rudolf Marek 已提交
393
config SENSORS_CORETEMP
394
	tristate "Intel Core/Core2/Atom temperature sensor"
395
	depends on X86 && PCI && EXPERIMENTAL
R
Rudolf Marek 已提交
396 397
	help
	  If you say yes here you get support for the temperature
398
	  sensor inside your CPU. Most of the family 6 CPUs
399
	  are supported. Check Documentation/hwmon/coretemp for details.
R
Rudolf Marek 已提交
400

401 402
config SENSORS_PKGTEMP
	tristate "Intel processor package temperature sensor"
403
	depends on X86 && EXPERIMENTAL
404 405 406 407
	help
	  If you say yes here you get support for the package level temperature
	  sensor inside your CPU. Check documentation/driver for details.

408 409 410 411 412 413 414 415 416
config SENSORS_IBMAEM
	tristate "IBM Active Energy Manager temperature/power sensors and control"
	select IPMI_SI
	depends on IPMI_HANDLER
	help
	  If you say yes here you get support for the temperature and
	  power sensors and capping hardware in various IBM System X
	  servers that support Active Energy Manager.  This includes
	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
417
	  and certain HC10/HS2x/LS2x/QS2x blades.
418 419 420 421

	  This driver can also be built as a module.  If so, the module
	  will be called ibmaem.

D
Darrick J. Wong 已提交
422 423 424 425 426 427 428
config SENSORS_IBMPEX
	tristate "IBM PowerExecutive temperature/power sensors"
	select IPMI_SI
	depends on IPMI_HANDLER
	help
	  If you say yes here you get support for the temperature and
	  power sensors in various IBM System X servers that support
429 430 431
	  PowerExecutive.  So far this includes the x3350, x3550, x3650,
	  x3655, and x3755; the x3800, x3850, and x3950 models that have
	  PCI Express; and some of the HS2x, LS2x, and QS2x blades.
D
Darrick J. Wong 已提交
432 433 434 435

	  This driver can also be built as a module.  If so, the module
	  will be called ibmpex.

436 437
config SENSORS_IT87
	tristate "ITE IT87xx and compatibles"
438
	select HWMON_VID
439
	help
J
Jean Delvare 已提交
440
	  If you say yes here you get support for ITE IT8705F, IT8712F,
441 442
	  IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor
	  chips, and the SiS960 clone.
443 444 445 446

	  This driver can also be built as a module.  If so, the module
	  will be called it87.

447 448 449 450 451 452 453 454 455 456
config SENSORS_JZ4740
	tristate "Ingenic JZ4740 SoC ADC driver"
	depends on MACH_JZ4740 && MFD_JZ4740_ADC
	help
	  If you say yes here you get support for reading adc values from the ADCIN
	  pin on Ingenic JZ4740 SoC based boards.

	  This driver can also be build as a module. If so, the module will be
	  called jz4740-hwmon.

457
config SENSORS_JC42
458
	tristate "JEDEC JC42.4 compliant memory module temperature sensors"
R
Randy Dunlap 已提交
459
	depends on I2C
460
	help
461 462 463 464 465
	  If you say yes here, you get support for JEDEC JC42.4 compliant
	  temperature sensors, which are used on many DDR3 memory modules for
	  mobile devices and servers.  Support will include, but not be limited
	  to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243,
	  MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3.
466 467 468 469

	  This driver can also be built as a module.  If so, the module
	  will be called jc42.

470 471 472 473 474 475 476 477 478 479 480
config SENSORS_LINEAGE
	tristate "Lineage Compact Power Line Power Entry Module"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Lineage Compact Power Line
	  series of DC/DC and AC/DC converters such as CP1800, CP2000AC,
	  CP2000DC, CP2725, and others.

	  This driver can also be built as a module.  If so, the module
	  will be called lineage-pem.

481
config SENSORS_LM63
482
	tristate "National Semiconductor LM63 and LM64"
J
Jan Engelhardt 已提交
483
	depends on I2C
484
	help
485 486 487 488 489
	  If you say yes here you get support for the National
	  Semiconductor LM63 and LM64 remote diode digital temperature
	  sensors with integrated fan control.  Such chips are found
	  on the Tyan S4882 (Thunder K8QS Pro) motherboard, among
	  others.
490 491 492 493

	  This driver can also be built as a module.  If so, the module
	  will be called lm63.

494
config SENSORS_LM70
495
	tristate "National Semiconductor LM70 / Texas Instruments TMP121"
496
	depends on SPI_MASTER
497 498
	help
	  If you say yes here you get support for the National Semiconductor
499 500
	  LM70 and Texas Instruments TMP121/TMP123 digital temperature
	  sensor chips.
501 502 503 504

	  This driver can also be built as a module.  If so, the module
	  will be called lm70.

505 506 507 508 509 510 511 512 513
config SENSORS_LM73
	tristate "National Semiconductor LM73"
	depends on I2C
	help
	  If you say yes here you get support for National Semiconductor LM73
	  sensor chips.
	  This driver can also be built as a module.  If so, the module
	  will be called lm73.

514 515
config SENSORS_LM75
	tristate "National Semiconductor LM75 and compatibles"
J
Jan Engelhardt 已提交
516
	depends on I2C
517
	help
D
David Brownell 已提交
518 519 520 521 522 523 524 525 526 527
	  If you say yes here you get support for one common type of
	  temperature sensor chip, with models including:

		- Dallas Semiconductor DS75 and DS1775
		- Maxim MAX6625 and MAX6626
		- Microchip MCP980x
		- National Semiconductor LM75
		- NXP's LM75A
		- ST Microelectronics STDS75
		- TelCom (now Microchip) TCN75
528 529
		- Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175,
		  TMP275
D
David Brownell 已提交
530

531 532 533 534 535 536
	  This driver supports driver model based binding through board
	  specific I2C device tables.

	  It also supports the "legacy" style of driver binding.  To use
	  that with some chips which don't replicate LM75 quirks exactly,
	  you may need the "force" module parameter.
537 538 539 540 541 542

	  This driver can also be built as a module.  If so, the module
	  will be called lm75.

config SENSORS_LM77
	tristate "National Semiconductor LM77"
J
Jan Engelhardt 已提交
543
	depends on I2C
544 545 546 547 548 549 550 551 552
	help
	  If you say yes here you get support for National Semiconductor LM77
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm77.

config SENSORS_LM78
	tristate "National Semiconductor LM78 and compatibles"
J
Jan Engelhardt 已提交
553
	depends on I2C
554
	select HWMON_VID
555 556 557 558 559 560 561 562 563
	help
	  If you say yes here you get support for National Semiconductor LM78,
	  LM78-J and LM79.

	  This driver can also be built as a module.  If so, the module
	  will be called lm78.

config SENSORS_LM80
	tristate "National Semiconductor LM80"
564
	depends on I2C
565 566 567 568 569 570 571 572
	help
	  If you say yes here you get support for National Semiconductor
	  LM80 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm80.

config SENSORS_LM83
J
Jordan Crouse 已提交
573
	tristate "National Semiconductor LM83 and compatibles"
J
Jan Engelhardt 已提交
574
	depends on I2C
575 576
	help
	  If you say yes here you get support for National Semiconductor
J
Jordan Crouse 已提交
577
	  LM82 and LM83 sensor chips.
578 579 580 581 582 583

	  This driver can also be built as a module.  If so, the module
	  will be called lm83.

config SENSORS_LM85
	tristate "National Semiconductor LM85 and compatibles"
584
	depends on I2C
585
	select HWMON_VID
586 587
	help
	  If you say yes here you get support for National Semiconductor LM85
588
	  sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100,
589
	  EMC6D101, EMC6D102, and EMC6D103.
590 591 592 593 594

	  This driver can also be built as a module.  If so, the module
	  will be called lm85.

config SENSORS_LM87
595
	tristate "National Semiconductor LM87 and compatibles"
J
Jan Engelhardt 已提交
596
	depends on I2C
597
	select HWMON_VID
598 599
	help
	  If you say yes here you get support for National Semiconductor LM87
600
	  and Analog Devices ADM1024 sensor chips.
601 602 603 604 605 606

	  This driver can also be built as a module.  If so, the module
	  will be called lm87.

config SENSORS_LM90
	tristate "National Semiconductor LM90 and compatibles"
J
Jan Engelhardt 已提交
607
	depends on I2C
608 609
	help
	  If you say yes here you get support for National Semiconductor LM90,
610
	  LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim
611
	  MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
612
	  MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton
613
	  W83L771W/G/AWG/ASG sensor chips.
614 615 616 617 618 619

	  This driver can also be built as a module.  If so, the module
	  will be called lm90.

config SENSORS_LM92
	tristate "National Semiconductor LM92 and compatibles"
J
Jan Engelhardt 已提交
620
	depends on I2C
621 622 623 624 625 626 627
	help
	  If you say yes here you get support for National Semiconductor LM92
	  and Maxim MAX6635 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm92.

H
Hans-Jürgen Koch 已提交
628 629
config SENSORS_LM93
	tristate "National Semiconductor LM93 and compatibles"
J
Jean Delvare 已提交
630
	depends on I2C
H
Hans-Jürgen Koch 已提交
631 632
	select HWMON_VID
	help
633 634
	  If you say yes here you get support for National Semiconductor LM93,
	  LM94, and compatible sensor chips.
H
Hans-Jürgen Koch 已提交
635 636 637 638

	  This driver can also be built as a module.  If so, the module
	  will be called lm93.

I
Ira Snyder 已提交
639 640 641 642 643 644 645 646 647 648 649
config SENSORS_LTC4215
	tristate "Linear Technology LTC4215"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for Linear Technology LTC4215
	  Hot Swap Controller I2C interface.

	  This driver can also be built as a module. If so, the module will
	  be called ltc4215.

I
Ira Snyder 已提交
650 651 652 653 654 655 656 657 658 659 660
config SENSORS_LTC4245
	tristate "Linear Technology LTC4245"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for Linear Technology LTC4245
	  Multiple Supply Hot Swap Controller I2C interface.

	  This driver can also be built as a module. If so, the module will
	  be called ltc4245.

661 662 663 664 665 666 667 668 669 670 671
config SENSORS_LTC4261
	tristate "Linear Technology LTC4261"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for Linear Technology LTC4261
	  Negative Voltage Hot Swap Controller I2C interface.

	  This driver can also be built as a module. If so, the module will
	  be called ltc4261.

D
Davide Rizzo 已提交
672 673 674 675 676 677 678 679 680
config SENSORS_LM95241
	tristate "National Semiconductor LM95241 sensor chip"
	depends on I2C
	help
	  If you say yes here you get support for LM95241 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called lm95241.

681 682 683 684 685 686 687 688 689
config SENSORS_MAX1111
	tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
	depends on SPI_MASTER
	help
	  Say y here to support Maxim's MAX1111 ADC chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max1111.

690 691
config SENSORS_MAX1619
	tristate "Maxim MAX1619 sensor chip"
J
Jan Engelhardt 已提交
692
	depends on I2C
693 694 695 696 697 698
	help
	  If you say yes here you get support for MAX1619 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called max1619.

699 700 701 702 703 704 705 706 707 708
config SENSORS_MAX6639
	tristate "Maxim MAX6639 sensor chip"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the MAX6639
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max6639.

H
Hans-Juergen Koch 已提交
709 710
config SENSORS_MAX6650
	tristate "Maxim MAX6650 sensor chip"
J
Jan Engelhardt 已提交
711
	depends on I2C && EXPERIMENTAL
H
Hans-Juergen Koch 已提交
712 713 714 715 716 717 718
	help
	  If you say yes here you get support for the MAX6650 / MAX6651
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max6650.

719 720
config SENSORS_PC87360
	tristate "National Semiconductor PC87360 family"
721
	select HWMON_VID
722 723 724 725 726 727 728 729 730 731
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC8736x Super-I/O chips.
	  The PC87360, PC87363 and PC87364 only have fan monitoring and
	  control.  The PC87365 and PC87366 additionally have voltage and
	  temperature monitoring.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87360.

732 733 734 735 736 737 738
config SENSORS_PC87427
	tristate "National Semiconductor PC87427"
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC87427 Super-I/O chip.
	  The chip has two distinct logical devices, one for fan speed
	  monitoring and control, and one for voltage and temperature
739 740
	  monitoring. Fan speed monitoring and control are supported, as
	  well as temperature monitoring. Voltages aren't supported yet.
741 742 743 744

	  This driver can also be built as a module.  If so, the module
	  will be called pc87427.

J
Jean Delvare 已提交
745 746 747 748 749 750 751 752 753 754 755 756 757 758
config SENSORS_PCF8591
	tristate "Philips PCF8591 ADC/DAC"
	depends on I2C
	default n
	help
	  If you say yes here you get support for Philips PCF8591 4-channel
	  ADC, 1-channel DAC chips.

	  This driver can also be built as a module.  If so, the module
	  will be called pcf8591.

	  These devices are hard to detect and rarely found on mainstream
	  hardware.  If unsure, say N.

G
Guenter Roeck 已提交
759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781
config PMBUS
	tristate "PMBus support"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  Say yes here if you want to enable PMBus support.

	  This driver can also be built as a module. If so, the module will
	  be called pmbus_core.

if PMBUS

config SENSORS_PMBUS
	tristate "Generic PMBus devices"
	default n
	help
	  If you say yes here you get hardware monitoring support for generic
	  PMBus devices, including but not limited to BMR450, BMR451, BMR453,
	  BMR454, and LTC2978.

	  This driver can also be built as a module. If so, the module will
	  be called pmbus.

782 783 784 785 786 787 788 789 790 791
config SENSORS_MAX8688
	tristate "Maxim MAX8688"
	default n
	help
	  If you say yes here you get hardware monitoring support for Maxim
	  MAX8688.

	  This driver can also be built as a module. If so, the module will
	  be called max8688.

G
Guenter Roeck 已提交
792 793
endif # PMBUS

794 795 796 797 798 799 800 801 802 803
config SENSORS_SHT15
	tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
	depends on GENERIC_GPIO
	help
	  If you say yes here you get support for the Sensiron SHT10, SHT11,
	  SHT15, SHT71, SHT75 humidity and temperature sensors.

	  This driver can also be built as a module.  If so, the module
	  will be called sht15.

804 805 806 807 808 809 810 811 812 813
config SENSORS_SHT21
	tristate "Sensiron humidity and temperature sensors. SHT21 and compat."
	depends on I2C
	help
	  If you say yes here you get support for the Sensiron SHT21, SHT25
	  humidity and temperature sensors.

	  This driver can also be built as a module.  If so, the module
	  will be called sht21.

814
config SENSORS_S3C
815 816
	tristate "Samsung built-in ADC"
	depends on S3C_ADC
817 818
	help
	  If you say yes here you get support for the on-board ADCs of
819
	  the Samsung S3C24XX, S3C64XX and other series of SoC
820 821

	  This driver can also be built as a module. If so, the module
822
	  will be called s3c-hwmon.
823 824 825 826 827 828 829 830

config SENSORS_S3C_RAW
	bool "Include raw channel attributes in sysfs"
	depends on SENSORS_S3C
	help
	  Say Y here if you want to include raw copies of all the ADC
	  channels in sysfs.

831 832
config SENSORS_SIS5595
	tristate "Silicon Integrated Systems Corp. SiS5595"
833
	depends on PCI
834 835 836 837 838 839 840
	help
	  If you say yes here you get support for the integrated sensors in
	  SiS5595 South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called sis5595.

841 842 843 844 845 846 847 848 849 850 851 852 853 854 855
config SENSORS_SMM665
	tristate "Summit Microelectronics SMM665"
	depends on I2C && EXPERIMENTAL
	default n
	help
	  If you say yes here you get support for the hardware monitoring
	  features of the Summit Microelectronics SMM665/SMM665B Six-Channel
	  Active DC Output Controller / Monitor.

	  Other supported chips are SMM465, SMM665C, SMM764, and SMM766.
	  Support for those chips is untested.

	  This driver can also be built as a module. If so, the module will
	  be called smm665.

J
Juerg Haefliger 已提交
856
config SENSORS_DME1737
857
	tristate "SMSC DME1737, SCH311x and compatibles"
J
Juerg Haefliger 已提交
858 859 860 861
	depends on I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for the hardware monitoring
862 863
	  and fan control features of the SMSC DME1737, SCH311x, SCH5027, and
	  Asus A8000 Super-I/O chips.
J
Juerg Haefliger 已提交
864 865 866 867

	  This driver can also be built as a module.  If so, the module
	  will be called dme1737.

868
config SENSORS_EMC1403
869
	tristate "SMSC EMC1403/23 thermal sensor"
870 871
	depends on I2C
	help
872
	  If you say yes here you get support for the SMSC EMC1403/23
873 874 875 876 877
	  temperature monitoring chip.

	  Threshold values can be configured using sysfs.
	  Data from the different diodes are accessible via sysfs.

878 879 880 881 882 883 884 885 886 887
config SENSORS_EMC2103
	tristate "SMSC EMC2103"
	depends on I2C
	help
	  If you say yes here you get support for the temperature
	  and fan sensors of the SMSC EMC2103 chips.

	  This driver can also be built as a module.  If so, the module
	  will be called emc2103.

888 889 890 891 892
config SENSORS_SMSC47M1
	tristate "SMSC LPC47M10x and compatibles"
	help
	  If you say yes here you get support for the integrated fan
	  monitoring and control capabilities of the SMSC LPC47B27x,
893
	  LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
894
	  LPC47M192, LPC47M292 and LPC47M997 chips.
895

896 897 898 899
	  The temperature and voltage sensor features of the LPC47M15x,
	  LPC47M192, LPC47M292 and LPC47M997 are supported by another
	  driver, select also "SMSC LPC47M192 and compatibles" below for
	  those.
900 901 902 903

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m1.

904 905
config SENSORS_SMSC47M192
	tristate "SMSC LPC47M192 and compatibles"
906
	depends on I2C
907 908 909
	select HWMON_VID
	help
	  If you say yes here you get support for the temperature and
910 911
	  voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
	  and LPC47M997 chips.
912 913 914 915 916 917 918 919 920

	  The fan monitoring and control capabilities of these chips
	  are supported by another driver, select
	  "SMSC LPC47M10x and compatibles" above. You need both drivers
	  if you want fan control and voltage/temperature sensor support.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m192.

921 922
config SENSORS_SMSC47B397
	tristate "SMSC LPC47B397-NC"
J
Jan Engelhardt 已提交
923
	depends on EXPERIMENTAL
924 925 926 927 928 929 930
	help
	  If you say yes here you get support for the SMSC LPC47B397-NC
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47b397.

931 932 933 934 935 936 937 938 939 940
config SENSORS_ADS7828
	tristate "Texas Instruments ADS7828"
	depends on I2C
	help
	  If you say yes here you get support for Texas Instruments ADS7828
	  12-bit 8-channel ADC device.

	  This driver can also be built as a module.  If so, the module
	  will be called ads7828.

941 942 943 944 945 946 947 948 949
config SENSORS_ADS7871
	tristate "Texas Instruments ADS7871 A/D converter"
	depends on SPI
	help
	  If you say yes here you get support for TI ADS7871 & ADS7870

	  This driver can also be built as a module.  If so, the module
	  will be called ads7871.

950 951 952 953 954 955 956 957 958 959
config SENSORS_AMC6821
	tristate "Texas Instruments AMC6821"
	depends on I2C  && EXPERIMENTAL
	help
	  If you say yes here you get support for the Texas Instruments
	  AMC6821 hardware monitoring chips.

	  This driver can also be build as a module.  If so, the module
	  will be called amc6821.

960 961
config SENSORS_THMC50
	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
962
	depends on I2C
963 964 965 966 967 968 969
	help
	  If you say yes here you get support for Texas Instruments THMC50
	  sensor chips and clones: the Analog Devices ADM1022.

	  This driver can also be built as a module.  If so, the module
	  will be called thmc50.

970
config SENSORS_TMP102
J
Jean Delvare 已提交
971
	tristate "Texas Instruments TMP102"
972 973 974 975 976 977 978 979
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Texas Instruments TMP102
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called tmp102.

980 981 982 983 984 985 986 987 988 989
config SENSORS_TMP401
	tristate "Texas Instruments TMP401 and compatibles"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Texas Instruments TMP401 and
	  TMP411 temperature sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called tmp401.

990 991 992 993 994 995 996 997 998 999
config SENSORS_TMP421
	tristate "Texas Instruments TMP421 and compatible"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Texas Instruments TMP421,
	  TMP422 and TMP423 temperature sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called tmp421.

1000 1001 1002 1003 1004 1005 1006 1007
config SENSORS_VIA_CPUTEMP
	tristate "VIA CPU temperature sensor"
	depends on X86
	help
	  If you say yes here you get support for the temperature
	  sensor inside your CPU. Supported are all known variants of
	  the VIA C7 and Nano.

1008 1009
config SENSORS_VIA686A
	tristate "VIA686A"
1010
	depends on PCI
1011 1012 1013 1014 1015 1016 1017
	help
	  If you say yes here you get support for the integrated sensors in
	  Via 686A/B South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called via686a.

1018 1019 1020 1021 1022 1023 1024 1025 1026 1027
config SENSORS_VT1211
	tristate "VIA VT1211"
	select HWMON_VID
	help
	  If you say yes here then you get support for hardware monitoring
	  features of the VIA VT1211 Super-I/O chip.

	  This driver can also be built as a module.  If so, the module
	  will be called vt1211.

R
Roger Lucas 已提交
1028
config SENSORS_VT8231
1029
	tristate "VIA VT8231"
1030
	depends on PCI
R
Roger Lucas 已提交
1031 1032 1033 1034 1035 1036 1037 1038
	select HWMON_VID
	help
	  If you say yes here then you get support for the integrated sensors
	  in the VIA VT8231 device.

	  This driver can also be built as a module.  If so, the module
	  will be called vt8231.

1039
config SENSORS_W83781D
1040
	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
J
Jan Engelhardt 已提交
1041
	depends on I2C
1042
	select HWMON_VID
1043 1044
	help
	  If you say yes here you get support for the Winbond W8378x series
1045 1046
	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
	  Asus AS99127F.
1047 1048 1049 1050

	  This driver can also be built as a module.  If so, the module
	  will be called w83781d.

1051 1052
config SENSORS_W83791D
	tristate "Winbond W83791D"
1053
	depends on I2C
1054 1055 1056 1057 1058 1059 1060
	select HWMON_VID
	help
	  If you say yes here you get support for the Winbond W83791D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83791d.

1061 1062
config SENSORS_W83792D
	tristate "Winbond W83792D"
1063
	depends on I2C
1064 1065 1066 1067 1068 1069
	help
	  If you say yes here you get support for the Winbond W83792D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83792d.

1070 1071
config SENSORS_W83793
	tristate "Winbond W83793"
J
Jan Engelhardt 已提交
1072
	depends on I2C && EXPERIMENTAL
1073
	select HWMON_VID
1074 1075
	help
	  If you say yes here you get support for the Winbond W83793
1076 1077
	  hardware monitoring chip, including support for the integrated
	  watchdog.
1078 1079 1080 1081

	  This driver can also be built as a module.  If so, the module
	  will be called w83793.

1082 1083 1084 1085 1086 1087 1088 1089 1090 1091
config SENSORS_W83795
	tristate "Winbond/Nuvoton W83795G/ADG"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83795G and
	  W83795ADG hardware monitoring chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83795.

1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108
config SENSORS_W83795_FANCTRL
	boolean "Include fan control support (DANGEROUS)"
	depends on SENSORS_W83795 && EXPERIMENTAL
	default n
	help
	  If you say yes here, support for the both manual and automatic
	  fan control features will be included in the driver.

	  This part of the code wasn't carefully reviewed and tested yet,
	  so enabling this option is strongly discouraged on production
	  servers. Only developers and testers should enable it for the
	  time being.

	  Please also note that this option will create sysfs attribute
	  files which may change in the future, so you shouldn't rely
	  on them being stable.

1109 1110
config SENSORS_W83L785TS
	tristate "Winbond W83L785TS-S"
J
Jan Engelhardt 已提交
1111
	depends on I2C && EXPERIMENTAL
1112 1113 1114 1115 1116 1117 1118 1119
	help
	  If you say yes here you get support for the Winbond W83L785TS-S
	  sensor chip, which is used on the Asus A7N8X, among other
	  motherboards.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l785ts.

1120 1121 1122 1123 1124 1125 1126 1127 1128 1129
config SENSORS_W83L786NG
	tristate "Winbond W83L786NG, W83L786NR"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83L786NG
	  and W83L786NR sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l786ng.

1130
config SENSORS_W83627HF
1131
	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
1132
	select HWMON_VID
1133 1134
	help
	  If you say yes here you get support for the Winbond W836X7 series
1135 1136
	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
	  W83697HF.
1137 1138 1139 1140 1141

	  This driver can also be built as a module.  If so, the module
	  will be called w83627hf.

config SENSORS_W83627EHF
1142
	tristate "Winbond W83627EHF/EHG/DHG, W83667HG"
1143
	select HWMON_VID
1144
	help
1145
	  If you say yes here you get support for the hardware
1146 1147
	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.

1148
	  This driver also supports the W83627EHG, which is the lead-free
1149 1150 1151
	  version of the W83627EHF, and the W83627DHG, which is a similar
	  chip suited for specific Intel processors that use PECI such as
	  the Core 2 Duo.
1152

1153 1154
	  This driver also supports the W83667HG chip.

1155 1156 1157
	  This driver can also be built as a module.  If so, the module
	  will be called w83627ehf.

1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168
config SENSORS_WM831X
	tristate "WM831x PMICs"
	depends on MFD_WM831X
	help
	  If you say yes here you get support for the hardware
	  monitoring functionality of the Wolfson Microelectronics
	  WM831x series of PMICs.

	  This driver can also be built as a module.  If so, the module
	  will be called wm831x-hwmon.

1169 1170 1171 1172 1173 1174 1175 1176 1177
config SENSORS_WM8350
	tristate "Wolfson Microelectronics WM835x"
	depends on MFD_WM8350
	help
	  If you say yes here you get support for the hardware
	  monitoring features of the WM835x series of PMICs.

	  This driver can also be built as a module.  If so, the module
	  will be called wm8350-hwmon.
1178

1179 1180 1181 1182 1183 1184 1185
config SENSORS_ULTRA45
	tristate "Sun Ultra45 PIC16F747"
	depends on SPARC64
	help
	  This driver provides support for the Ultra45 workstation environmental
	  sensors.

D
Daniel Mack 已提交
1186 1187 1188
config SENSORS_LIS3_SPI
	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
	depends on !ACPI && SPI_MASTER && INPUT
E
Eric Piel 已提交
1189
	select INPUT_POLLDEV
D
Daniel Mack 已提交
1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202
	default n
	help
	  This driver provides support for the LIS3LV02Dx accelerometer connected
	  via SPI. The accelerometer data is readable via
	  /sys/devices/platform/lis3lv02d.

	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.

	  This driver can also be built as modules.  If so, the core module
	  will be called lis3lv02d and a specific module for the SPI transport
	  is called lis3lv02d_spi.

1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219
config SENSORS_LIS3_I2C
	tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
	depends on I2C && INPUT
	select INPUT_POLLDEV
	default n
	help
	  This driver provides support for the LIS3LV02Dx accelerometer connected
	  via I2C. The accelerometer data is readable via
	  /sys/devices/platform/lis3lv02d.

	  This driver also provides an absolute input class device, allowing
	  the device to act as a pinball machine-esque joystick.

	  This driver can also be built as modules.  If so, the core module
	  will be called lis3lv02d and a specific module for the I2C transport
	  is called lis3lv02d_i2c.

1220 1221
config SENSORS_APPLESMC
	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
1222
	depends on INPUT && X86
1223 1224
	select NEW_LEDS
	select LEDS_CLASS
1225
	select INPUT_POLLDEV
1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244
	default n
	help
	  This driver provides support for the Apple System Management
	  Controller, which provides an accelerometer (Apple Sudden Motion
	  Sensor), light sensors, temperature sensors, keyboard backlight
	  control and fan control.

	  Only Intel-based Apple's computers are supported (MacBook Pro,
	  MacBook, MacMini).

	  Data from the different sensors, keyboard backlight control and fan
	  control are accessible via sysfs.

	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.

	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of applesmc.

1245 1246 1247 1248 1249 1250
config SENSORS_MC13783_ADC
        tristate "Freescale MC13783 ADC"
        depends on MFD_MC13783
        help
          Support for the A/D converter on MC13783 PMIC.

1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267
if ACPI

comment "ACPI drivers"

config SENSORS_ATK0110
	tristate "ASUS ATK0110"
	depends on X86 && EXPERIMENTAL
	help
	  If you say yes here you get support for the ACPI hardware
	  monitoring interface found in many ASUS motherboards. This
	  driver will provide readings of fans, voltages and temperatures
	  through the system firmware.

	  This driver can also be built as a module. If so, the module
	  will be called asus_atk0110.

config SENSORS_LIS3LV02D
1268
	tristate "STMicroeletronics LIS3* three-axis digital accelerometer"
1269 1270 1271 1272
	depends on INPUT
	select INPUT_POLLDEV
	select NEW_LEDS
	select LEDS_CLASS
1273 1274
	default n
	help
1275 1276 1277 1278 1279 1280 1281
	  This driver provides support for the LIS3* accelerometers, such as the
	  LIS3LV02DL or the LIS331DL. In particular, it can be found in a number
	  of HP laptops, which have the "Mobile Data Protection System 3D" or
	  "3D DriveGuard" feature. On such systems the driver should load
	  automatically (via ACPI alias). The accelerometer might also be found
	  in other systems, connected via SPI or I2C. The accelerometer data is
	  readable via /sys/devices/platform/lis3lv02d.
1282 1283

	  This driver also provides an absolute input class device, allowing
1284 1285
	  a laptop to act as a pinball machine-esque joystick. It provides also
	  a misc device which can be used to detect free-fall. On HP laptops,
1286
	  if the led infrastructure is activated, support for a led indicating
1287 1288
	  disk protection will be provided as hp::hddprotect. For more
	  information on the feature, refer to Documentation/hwmon/lis3lv02d.
1289 1290 1291 1292 1293 1294 1295 1296 1297

	  This driver can also be built as modules.  If so, the core module
	  will be called lis3lv02d and a specific module for HP laptops will be
	  called hp_accel.

	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of lis3lv02d.

endif # ACPI
1298

J
Jan Engelhardt 已提交
1299
endif # HWMON