Kconfig 25.1 KB
Newer Older
1
#
2
# Hardware monitoring chip drivers configuration
3 4
#

J
Jan Engelhardt 已提交
5
menuconfig HWMON
6
	tristate "Hardware Monitoring support"
7
	depends on HAS_IOMEM
8 9 10 11 12 13
	default y
	help
	  Hardware monitoring devices let you monitor the hardware health
	  of a system. Most modern motherboards include such a device. It
	  can include temperature sensors, voltage sensors, fan speed
	  sensors and various additional features such as the ability to
14 15 16 17
	  control the speed of the fans.  If you want this support you
	  should say Y here and also to the specific driver(s) for your
	  sensors chip(s) below.

18 19 20 21
	  To find out which specific driver(s) you need, use the
	  sensors-detect script from the lm_sensors package.  Read
	  <file:Documentation/hwmon/userspace-tools> for details.

22 23
	  This support can also be built as a module.  If so, the module
	  will be called hwmon.
24

J
Jan Engelhardt 已提交
25 26
if HWMON

27 28 29 30
config HWMON_VID
	tristate
	default n

31
config SENSORS_ABITUGURU
32
	tristate "Abit uGuru (rev 1 & 2)"
J
Jean Delvare 已提交
33
	depends on X86 && EXPERIMENTAL
34
	help
35 36 37 38 39 40 41
	  If you say yes here you get support for the sensor part of the first
	  and second revision of the Abit uGuru chip. The voltage and frequency
	  control parts of the Abit uGuru are not supported. The Abit uGuru
	  chip can be found on Abit uGuru featuring motherboards (most modern
	  Abit motherboards from before end 2005). For more info and a list
	  of which motherboards have which revision see
	  Documentation/hwmon/abituguru
42 43 44 45

	  This driver can also be built as a module.  If so, the module
	  will be called abituguru.

46 47
config SENSORS_ABITUGURU3
	tristate "Abit uGuru (rev 3)"
J
Jean Delvare 已提交
48
	depends on X86 && EXPERIMENTAL
49 50 51 52 53 54 55 56 57 58 59
	help
	  If you say yes here you get support for the sensor part of the
	  third revision of the Abit uGuru chip. Only reading the sensors
	  and their settings is supported. The third revision of the Abit
	  uGuru chip can be found on recent Abit motherboards (since end
	  2005). For more info and a list of which motherboards have which
	  revision see Documentation/hwmon/abituguru3

	  This driver can also be built as a module.  If so, the module
	  will be called abituguru3.

60 61
config SENSORS_AD7418
	tristate "Analog Devices AD7416, AD7417 and AD7418"
J
Jan Engelhardt 已提交
62
	depends on I2C && EXPERIMENTAL
63 64 65 66 67 68 69
	help
	  If you say yes here you get support for the Analog Devices
	  AD7416, AD7417 and AD7418 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called ad7418.

70 71
config SENSORS_ADM1021
	tristate "Analog Devices ADM1021 and compatibles"
J
Jan Engelhardt 已提交
72
	depends on I2C
73 74 75 76 77 78 79 80 81 82 83
	help
	  If you say yes here you get support for Analog Devices ADM1021
	  and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A,
	  Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10,
	  and the XEON processor built-in sensor.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1021.

config SENSORS_ADM1025
	tristate "Analog Devices ADM1025 and compatibles"
J
Jan Engelhardt 已提交
84
	depends on I2C
85
	select HWMON_VID
86 87 88 89 90 91 92 93 94
	help
	  If you say yes here you get support for Analog Devices ADM1025
	  and Philips NE1619 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1025.

config SENSORS_ADM1026
	tristate "Analog Devices ADM1026 and compatibles"
J
Jan Engelhardt 已提交
95
	depends on I2C && EXPERIMENTAL
96
	select HWMON_VID
97 98 99 100 101 102 103
	help
	  If you say yes here you get support for Analog Devices ADM1026
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1026.

104 105
config SENSORS_ADM1029
	tristate "Analog Devices ADM1029"
J
Jan Engelhardt 已提交
106
	depends on I2C && EXPERIMENTAL
107 108 109 110 111 112 113 114
	help
	  If you say yes here you get support for Analog Devices ADM1029
	  sensor chip.
	  Very rare chip, please let us know you use it.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1029.

115 116
config SENSORS_ADM1031
	tristate "Analog Devices ADM1031 and compatibles"
J
Jan Engelhardt 已提交
117
	depends on I2C && EXPERIMENTAL
118 119 120 121 122 123 124 125 126
	help
	  If you say yes here you get support for Analog Devices ADM1031
	  and ADM1030 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm1031.

config SENSORS_ADM9240
	tristate "Analog Devices ADM9240 and compatibles"
J
Jan Engelhardt 已提交
127
	depends on I2C && EXPERIMENTAL
128
	select HWMON_VID
129 130 131 132 133 134 135
	help
	  If you say yes here you get support for Analog Devices ADM9240,
	  Dallas DS1780, National Semiconductor LM81 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called adm9240.

D
Darrick J. Wong 已提交
136 137 138 139 140 141 142 143 144 145
config SENSORS_ADT7470
	tristate "Analog Devices ADT7470"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7470 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7470.

146 147 148 149 150 151 152 153 154 155
config SENSORS_ADT7473
	tristate "Analog Devices ADT7473"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Analog Devices
	  ADT7473 temperature monitoring chips.

	  This driver can also be built as a module. If so, the module
	  will be called adt7473.

R
Rudolf Marek 已提交
156
config SENSORS_K8TEMP
R
Rudolf Marek 已提交
157
	tristate "AMD Athlon64/FX or Opteron temperature sensor"
J
Jan Engelhardt 已提交
158
	depends on X86 && PCI && EXPERIMENTAL
R
Rudolf Marek 已提交
159 160
	help
	  If you say yes here you get support for the temperature
R
Rudolf Marek 已提交
161 162 163
	  sensor(s) inside your CPU. Supported is whole AMD K8
	  microarchitecture. Please note that you will need at least
	  lm-sensors 2.10.1 for proper userspace support.
R
Rudolf Marek 已提交
164 165 166 167

	  This driver can also be built as a module.  If so, the module
	  will be called k8temp.

168 169
config SENSORS_AMS
	tristate "Apple Motion Sensor driver"
J
Jan Engelhardt 已提交
170
	depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL
171
	select INPUT_POLLDEV
172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193
	help
	  Support for the motion sensor included in PowerBooks. Includes
	  implementations for PMU and I2C.

	  This driver can also be built as a module. If so, the module
	  will be called ams.

config SENSORS_AMS_PMU
	bool "PMU variant"
	depends on SENSORS_AMS && ADB_PMU
	default y
	help
	  PMU variant of motion sensor, found in late 2005 PowerBooks.

config SENSORS_AMS_I2C
	bool "I2C variant"
	depends on SENSORS_AMS && I2C
	default y
	help
	  I2C variant of motion sensor, found in early 2005 PowerBooks and
	  iBooks.

194 195
config SENSORS_ASB100
	tristate "Asus ASB100 Bach"
J
Jean Delvare 已提交
196
	depends on X86 && I2C && EXPERIMENTAL
197
	select HWMON_VID
198 199 200 201 202 203 204 205 206
	help
	  If you say yes here you get support for the ASB100 Bach sensor
	  chip found on some Asus mainboards.

	  This driver can also be built as a module.  If so, the module
	  will be called asb100.

config SENSORS_ATXP1
	tristate "Attansic ATXP1 VID controller"
J
Jan Engelhardt 已提交
207
	depends on I2C && EXPERIMENTAL
208
	select HWMON_VID
209 210 211 212 213 214 215 216 217 218 219 220
	help
	  If you say yes here you get support for the Attansic ATXP1 VID
	  controller.

	  If your board have such a chip, you are able to control your CPU
	  core and other voltages.

	  This driver can also be built as a module.  If so, the module
	  will be called atxp1.

config SENSORS_DS1621
	tristate "Dallas Semiconductor DS1621 and DS1625"
J
Jan Engelhardt 已提交
221
	depends on I2C
222 223 224 225 226 227 228
	help
	  If you say yes here you get support for Dallas Semiconductor
	  DS1621 and DS1625 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called ds1621.

229 230 231 232 233 234 235 236 237 238
config SENSORS_I5K_AMB
	tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets"
	depends on PCI && EXPERIMENTAL
	help
	  If you say yes here you get support for FB-DIMM AMB temperature
	  monitoring chips on systems with the Intel 5000 series chipset.

	  This driver can also be built as a module. If so, the module
	  will be called i5k_amb.

J
Jean Delvare 已提交
239
config SENSORS_F71805F
240
	tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG"
J
Jan Engelhardt 已提交
241
	depends on EXPERIMENTAL
J
Jean Delvare 已提交
242 243
	help
	  If you say yes here you get support for hardware monitoring
244 245
	  features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG
	  Super-I/O chips.
J
Jean Delvare 已提交
246 247 248 249

	  This driver can also be built as a module.  If so, the module
	  will be called f71805f.

250 251 252 253 254 255 256 257 258 259
config SENSORS_F71882FG
	tristate "Fintek F71882FG and F71883FG"
	depends on EXPERIMENTAL
	help
	  If you say yes here you get support for hardware monitoring
	  features of the Fintek F71882FG and F71883FG Super-I/O chips.

	  This driver can also be built as a module.  If so, the module
	  will be called f71882fg.

R
Riku Voipio 已提交
260 261 262 263 264 265 266 267 268 269
config SENSORS_F75375S
	tristate "Fintek F75375S/SP and F75373";
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for hardware monitoring
	  features of the Fintek F75375S/SP and F75373

	  This driver can also be built as a module.  If so, the module
	  will be called f75375s.

270 271
config SENSORS_FSCHER
	tristate "FSC Hermes"
J
Jean Delvare 已提交
272
	depends on X86 && I2C
273 274 275 276 277 278 279 280 281
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Hermes sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscher.

config SENSORS_FSCPOS
	tristate "FSC Poseidon"
J
Jean Delvare 已提交
282
	depends on X86 && I2C
283 284 285 286 287 288 289
	help
	  If you say yes here you get support for Fujitsu Siemens
	  Computers Poseidon sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fscpos.

290 291 292 293 294 295 296 297 298 299 300 301 302 303
config SENSORS_FSCHMD
	tristate "FSC Poseidon, Scylla, Hermes, Heimdall and Heracles"
	depends on X86 && I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for various Fujitsu Siemens
	  Computers sensor chips.

	  This is a new merged driver for FSC sensor chips which is intended
	  as a replacment for the fscpos, fscscy and fscher drivers and adds
	  support for several other FCS sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called fschmd.

304 305
config SENSORS_GL518SM
	tristate "Genesys Logic GL518SM"
J
Jan Engelhardt 已提交
306
	depends on I2C
307 308 309 310 311 312 313 314 315
	help
	  If you say yes here you get support for Genesys Logic GL518SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl518sm.

config SENSORS_GL520SM
	tristate "Genesys Logic GL520SM"
J
Jan Engelhardt 已提交
316
	depends on I2C
317
	select HWMON_VID
318 319 320 321 322 323 324
	help
	  If you say yes here you get support for Genesys Logic GL520SM
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called gl520sm.

R
Rudolf Marek 已提交
325 326
config SENSORS_CORETEMP
	tristate "Intel Core (2) Duo/Solo temperature sensor"
J
Jan Engelhardt 已提交
327
	depends on X86 && EXPERIMENTAL
R
Rudolf Marek 已提交
328 329 330 331 332
	help
	  If you say yes here you get support for the temperature
	  sensor inside your CPU. Supported all are all known variants
	  of Intel Core family.

333 334 335 336 337 338 339 340 341 342 343 344 345 346
config SENSORS_IBMAEM
	tristate "IBM Active Energy Manager temperature/power sensors and control"
	select IPMI_SI
	depends on IPMI_HANDLER
	help
	  If you say yes here you get support for the temperature and
	  power sensors and capping hardware in various IBM System X
	  servers that support Active Energy Manager.  This includes
	  the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
	  and certain HS2x/LS2x/QS2x blades.

	  This driver can also be built as a module.  If so, the module
	  will be called ibmaem.

D
Darrick J. Wong 已提交
347 348 349 350 351 352 353
config SENSORS_IBMPEX
	tristate "IBM PowerExecutive temperature/power sensors"
	select IPMI_SI
	depends on IPMI_HANDLER
	help
	  If you say yes here you get support for the temperature and
	  power sensors in various IBM System X servers that support
354 355 356
	  PowerExecutive.  So far this includes the x3350, x3550, x3650,
	  x3655, and x3755; the x3800, x3850, and x3950 models that have
	  PCI Express; and some of the HS2x, LS2x, and QS2x blades.
D
Darrick J. Wong 已提交
357 358 359 360

	  This driver can also be built as a module.  If so, the module
	  will be called ibmpex.

361 362
config SENSORS_IT87
	tristate "ITE IT87xx and compatibles"
363
	select HWMON_VID
364
	help
J
Jean Delvare 已提交
365
	  If you say yes here you get support for ITE IT8705F, IT8712F,
R
Rudolf Marek 已提交
366
	  IT8716F, IT8718F and IT8726F sensor chips, and the SiS960 clone.
367 368 369 370 371 372

	  This driver can also be built as a module.  If so, the module
	  will be called it87.

config SENSORS_LM63
	tristate "National Semiconductor LM63"
J
Jan Engelhardt 已提交
373
	depends on I2C
374 375 376 377 378 379 380 381 382
	help
	  If you say yes here you get support for the National Semiconductor
	  LM63 remote diode digital temperature sensor with integrated fan
	  control.  Such chips are found on the Tyan S4882 (Thunder K8QS Pro)
	  motherboard, among others.

	  This driver can also be built as a module.  If so, the module
	  will be called lm63.

383 384
config SENSORS_LM70
	tristate "National Semiconductor LM70"
J
Jan Engelhardt 已提交
385
	depends on SPI_MASTER && EXPERIMENTAL
386 387 388 389 390 391 392
	help
	  If you say yes here you get support for the National Semiconductor
	  LM70 digital temperature sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called lm70.

393 394
config SENSORS_LM75
	tristate "National Semiconductor LM75 and compatibles"
J
Jan Engelhardt 已提交
395
	depends on I2C
396
	help
D
David Brownell 已提交
397 398 399 400 401 402 403 404 405 406 407 408 409
	  If you say yes here you get support for one common type of
	  temperature sensor chip, with models including:

		- Dallas Semiconductor DS75 and DS1775
		- Maxim MAX6625 and MAX6626
		- Microchip MCP980x
		- National Semiconductor LM75
		- NXP's LM75A
		- ST Microelectronics STDS75
		- TelCom (now Microchip) TCN75
		- Texas Instruments TMP100, TMP101, TMP75, TMP175, TMP275

	  Most of these chips will require a "force" module parameter.
410 411 412 413 414 415

	  This driver can also be built as a module.  If so, the module
	  will be called lm75.

config SENSORS_LM77
	tristate "National Semiconductor LM77"
J
Jan Engelhardt 已提交
416
	depends on I2C
417 418 419 420 421 422 423 424 425
	help
	  If you say yes here you get support for National Semiconductor LM77
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm77.

config SENSORS_LM78
	tristate "National Semiconductor LM78 and compatibles"
J
Jan Engelhardt 已提交
426
	depends on I2C
427
	select HWMON_VID
428 429 430 431 432 433 434 435 436
	help
	  If you say yes here you get support for National Semiconductor LM78,
	  LM78-J and LM79.

	  This driver can also be built as a module.  If so, the module
	  will be called lm78.

config SENSORS_LM80
	tristate "National Semiconductor LM80"
J
Jan Engelhardt 已提交
437
	depends on I2C && EXPERIMENTAL
438 439 440 441 442 443 444 445
	help
	  If you say yes here you get support for National Semiconductor
	  LM80 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm80.

config SENSORS_LM83
J
Jordan Crouse 已提交
446
	tristate "National Semiconductor LM83 and compatibles"
J
Jan Engelhardt 已提交
447
	depends on I2C
448 449
	help
	  If you say yes here you get support for National Semiconductor
J
Jordan Crouse 已提交
450
	  LM82 and LM83 sensor chips.
451 452 453 454 455 456

	  This driver can also be built as a module.  If so, the module
	  will be called lm83.

config SENSORS_LM85
	tristate "National Semiconductor LM85 and compatibles"
J
Jan Engelhardt 已提交
457
	depends on I2C && EXPERIMENTAL
458
	select HWMON_VID
459 460 461 462 463 464 465 466
	help
	  If you say yes here you get support for National Semiconductor LM85
	  sensor chips and clones: ADT7463, EMC6D100, EMC6D102 and ADM1027.

	  This driver can also be built as a module.  If so, the module
	  will be called lm85.

config SENSORS_LM87
467
	tristate "National Semiconductor LM87 and compatibles"
J
Jan Engelhardt 已提交
468
	depends on I2C
469
	select HWMON_VID
470 471
	help
	  If you say yes here you get support for National Semiconductor LM87
472
	  and Analog Devices ADM1024 sensor chips.
473 474 475 476 477 478

	  This driver can also be built as a module.  If so, the module
	  will be called lm87.

config SENSORS_LM90
	tristate "National Semiconductor LM90 and compatibles"
J
Jan Engelhardt 已提交
479
	depends on I2C
480 481
	help
	  If you say yes here you get support for National Semiconductor LM90,
482 483
	  LM86, LM89 and LM99, Analog Devices ADM1032 and Maxim MAX6657,
	  MAX6658, MAX6659, MAX6680 and MAX6681 sensor chips.
484 485 486 487 488 489 490 491 492

	  The Analog Devices ADT7461 sensor chip is also supported, but only
	  if found in ADM1032 compatibility mode.

	  This driver can also be built as a module.  If so, the module
	  will be called lm90.

config SENSORS_LM92
	tristate "National Semiconductor LM92 and compatibles"
J
Jan Engelhardt 已提交
493
	depends on I2C
494 495 496 497 498 499 500
	help
	  If you say yes here you get support for National Semiconductor LM92
	  and Maxim MAX6635 sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm92.

H
Hans-Jürgen Koch 已提交
501 502
config SENSORS_LM93
	tristate "National Semiconductor LM93 and compatibles"
J
Jean Delvare 已提交
503
	depends on I2C
H
Hans-Jürgen Koch 已提交
504 505 506 507 508 509 510 511
	select HWMON_VID
	help
	  If you say yes here you get support for National Semiconductor LM93
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called lm93.

512 513
config SENSORS_MAX1619
	tristate "Maxim MAX1619 sensor chip"
J
Jan Engelhardt 已提交
514
	depends on I2C
515 516 517 518 519 520
	help
	  If you say yes here you get support for MAX1619 sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called max1619.

H
Hans-Juergen Koch 已提交
521 522
config SENSORS_MAX6650
	tristate "Maxim MAX6650 sensor chip"
J
Jan Engelhardt 已提交
523
	depends on I2C && EXPERIMENTAL
H
Hans-Juergen Koch 已提交
524 525 526 527 528 529 530
	help
	  If you say yes here you get support for the MAX6650 / MAX6651
	  sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called max6650.

531 532
config SENSORS_PC87360
	tristate "National Semiconductor PC87360 family"
533
	select HWMON_VID
534 535 536 537 538 539 540 541 542 543
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC8736x Super-I/O chips.
	  The PC87360, PC87363 and PC87364 only have fan monitoring and
	  control.  The PC87365 and PC87366 additionally have voltage and
	  temperature monitoring.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87360.

544 545
config SENSORS_PC87427
	tristate "National Semiconductor PC87427"
J
Jan Engelhardt 已提交
546
	depends on EXPERIMENTAL
547 548 549 550 551 552 553 554 555 556
	help
	  If you say yes here you get access to the hardware monitoring
	  functions of the National Semiconductor PC87427 Super-I/O chip.
	  The chip has two distinct logical devices, one for fan speed
	  monitoring and control, and one for voltage and temperature
	  monitoring. Only fan speed monitoring is supported right now.

	  This driver can also be built as a module.  If so, the module
	  will be called pc87427.

557 558
config SENSORS_SIS5595
	tristate "Silicon Integrated Systems Corp. SiS5595"
559
	depends on PCI
560 561 562 563 564 565 566
	help
	  If you say yes here you get support for the integrated sensors in
	  SiS5595 South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called sis5595.

J
Juerg Haefliger 已提交
567
config SENSORS_DME1737
568
	tristate "SMSC DME1737, SCH311x and compatibles"
J
Juerg Haefliger 已提交
569 570 571 572 573
	depends on I2C && EXPERIMENTAL
	select HWMON_VID
	help
	  If you say yes here you get support for the hardware monitoring
	  and fan control features of the SMSC DME1737 (and compatibles
574
	  like the Asus A8000) and SCH311x Super-I/O chips.
J
Juerg Haefliger 已提交
575 576 577 578

	  This driver can also be built as a module.  If so, the module
	  will be called dme1737.

579 580 581 582 583
config SENSORS_SMSC47M1
	tristate "SMSC LPC47M10x and compatibles"
	help
	  If you say yes here you get support for the integrated fan
	  monitoring and control capabilities of the SMSC LPC47B27x,
584
	  LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x,
585
	  LPC47M192, LPC47M292 and LPC47M997 chips.
586

587 588 589 590
	  The temperature and voltage sensor features of the LPC47M15x,
	  LPC47M192, LPC47M292 and LPC47M997 are supported by another
	  driver, select also "SMSC LPC47M192 and compatibles" below for
	  those.
591 592 593 594

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m1.

595 596
config SENSORS_SMSC47M192
	tristate "SMSC LPC47M192 and compatibles"
J
Jan Engelhardt 已提交
597
	depends on I2C && EXPERIMENTAL
598 599 600
	select HWMON_VID
	help
	  If you say yes here you get support for the temperature and
601 602
	  voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
	  and LPC47M997 chips.
603 604 605 606 607 608 609 610 611

	  The fan monitoring and control capabilities of these chips
	  are supported by another driver, select
	  "SMSC LPC47M10x and compatibles" above. You need both drivers
	  if you want fan control and voltage/temperature sensor support.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47m192.

612 613
config SENSORS_SMSC47B397
	tristate "SMSC LPC47B397-NC"
J
Jan Engelhardt 已提交
614
	depends on EXPERIMENTAL
615 616 617 618 619 620 621
	help
	  If you say yes here you get support for the SMSC LPC47B397-NC
	  sensor chip.

	  This driver can also be built as a module.  If so, the module
	  will be called smsc47b397.

622 623 624 625 626 627 628 629 630 631
config SENSORS_ADS7828
	tristate "Texas Instruments ADS7828"
	depends on I2C
	help
	  If you say yes here you get support for Texas Instruments ADS7828
	  12-bit 8-channel ADC device.

	  This driver can also be built as a module.  If so, the module
	  will be called ads7828.

632 633 634 635 636 637 638 639 640 641
config SENSORS_THMC50
	tristate "Texas Instruments THMC50 / Analog Devices ADM1022"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for Texas Instruments THMC50
	  sensor chips and clones: the Analog Devices ADM1022.

	  This driver can also be built as a module.  If so, the module
	  will be called thmc50.

642 643
config SENSORS_VIA686A
	tristate "VIA686A"
644
	depends on PCI
645 646 647 648 649 650 651
	help
	  If you say yes here you get support for the integrated sensors in
	  Via 686A/B South Bridges.

	  This driver can also be built as a module.  If so, the module
	  will be called via686a.

652 653
config SENSORS_VT1211
	tristate "VIA VT1211"
J
Jan Engelhardt 已提交
654
	depends on EXPERIMENTAL
655 656 657 658 659 660 661 662
	select HWMON_VID
	help
	  If you say yes here then you get support for hardware monitoring
	  features of the VIA VT1211 Super-I/O chip.

	  This driver can also be built as a module.  If so, the module
	  will be called vt1211.

R
Roger Lucas 已提交
663
config SENSORS_VT8231
664
	tristate "VIA VT8231"
665
	depends on PCI
R
Roger Lucas 已提交
666 667 668 669 670 671 672 673
	select HWMON_VID
	help
	  If you say yes here then you get support for the integrated sensors
	  in the VIA VT8231 device.

	  This driver can also be built as a module.  If so, the module
	  will be called vt8231.

674
config SENSORS_W83781D
675
	tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
J
Jan Engelhardt 已提交
676
	depends on I2C
677
	select HWMON_VID
678 679
	help
	  If you say yes here you get support for the Winbond W8378x series
680 681
	  of sensor chips: the W83781D, W83782D and W83783S, and the similar
	  Asus AS99127F.
682 683 684 685

	  This driver can also be built as a module.  If so, the module
	  will be called w83781d.

686 687
config SENSORS_W83791D
	tristate "Winbond W83791D"
J
Jan Engelhardt 已提交
688
	depends on I2C && EXPERIMENTAL
689 690 691 692 693 694 695
	select HWMON_VID
	help
	  If you say yes here you get support for the Winbond W83791D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83791d.

696 697
config SENSORS_W83792D
	tristate "Winbond W83792D"
J
Jan Engelhardt 已提交
698
	depends on I2C && EXPERIMENTAL
699 700 701 702 703 704
	help
	  If you say yes here you get support for the Winbond W83792D chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83792d.

705 706
config SENSORS_W83793
	tristate "Winbond W83793"
J
Jan Engelhardt 已提交
707
	depends on I2C && EXPERIMENTAL
708
	select HWMON_VID
709 710 711 712 713 714 715
	help
	  If you say yes here you get support for the Winbond W83793
	  hardware monitoring chip.

	  This driver can also be built as a module.  If so, the module
	  will be called w83793.

716 717
config SENSORS_W83L785TS
	tristate "Winbond W83L785TS-S"
J
Jan Engelhardt 已提交
718
	depends on I2C && EXPERIMENTAL
719 720 721 722 723 724 725 726
	help
	  If you say yes here you get support for the Winbond W83L785TS-S
	  sensor chip, which is used on the Asus A7N8X, among other
	  motherboards.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l785ts.

727 728 729 730 731 732 733 734 735 736
config SENSORS_W83L786NG
	tristate "Winbond W83L786NG, W83L786NR"
	depends on I2C && EXPERIMENTAL
	help
	  If you say yes here you get support for the Winbond W83L786NG
	  and W83L786NR sensor chips.

	  This driver can also be built as a module.  If so, the module
	  will be called w83l786ng.

737
config SENSORS_W83627HF
738
	tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF"
739
	select HWMON_VID
740 741
	help
	  If you say yes here you get support for the Winbond W836X7 series
742 743
	  of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and
	  W83697HF.
744 745 746 747 748

	  This driver can also be built as a module.  If so, the module
	  will be called w83627hf.

config SENSORS_W83627EHF
749
	tristate "Winbond W83627EHF/DHG"
750
	select HWMON_VID
751
	help
752
	  If you say yes here you get support for the hardware
753 754
	  monitoring functionality of the Winbond W83627EHF Super-I/O chip.

755
	  This driver also supports the W83627EHG, which is the lead-free
756 757 758
	  version of the W83627EHF, and the W83627DHG, which is a similar
	  chip suited for specific Intel processors that use PECI such as
	  the Core 2 Duo.
759

760 761 762
	  This driver can also be built as a module.  If so, the module
	  will be called w83627ehf.

R
Robert Love 已提交
763 764
config SENSORS_HDAPS
	tristate "IBM Hard Drive Active Protection System (hdaps)"
J
Jan Engelhardt 已提交
765
	depends on INPUT && X86
766
	select INPUT_POLLDEV
R
Robert Love 已提交
767 768 769 770
	default n
	help
	  This driver provides support for the IBM Hard Drive Active Protection
	  System (hdaps), which provides an accelerometer and other misc. data.
R
Robert Love 已提交
771 772
	  ThinkPads starting with the R50, T41, and X40 are supported.  The
	  accelerometer data is readable via sysfs.
R
Robert Love 已提交
773

R
Robert Love 已提交
774 775
	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.
R
Robert Love 已提交
776

777 778 779
	  If your ThinkPad is not recognized by the driver, please update to latest
	  BIOS. This is especially the case for some R52 ThinkPads.

R
Robert Love 已提交
780 781 782
	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of hdaps.

783 784
config SENSORS_APPLESMC
	tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)"
785
	depends on INPUT && X86
786 787
	select NEW_LEDS
	select LEDS_CLASS
788
	select INPUT_POLLDEV
789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807
	default n
	help
	  This driver provides support for the Apple System Management
	  Controller, which provides an accelerometer (Apple Sudden Motion
	  Sensor), light sensors, temperature sensors, keyboard backlight
	  control and fan control.

	  Only Intel-based Apple's computers are supported (MacBook Pro,
	  MacBook, MacMini).

	  Data from the different sensors, keyboard backlight control and fan
	  control are accessible via sysfs.

	  This driver also provides an absolute input class device, allowing
	  the laptop to act as a pinball machine-esque joystick.

	  Say Y here if you have an applicable laptop and want to experience
	  the awesome power of applesmc.

808 809 810 811 812 813 814 815 816
config HWMON_DEBUG_CHIP
	bool "Hardware Monitoring Chip debugging messages"
	default n
	help
	  Say Y here if you want the I2C chip drivers to produce a bunch of
	  debug messages to the system log.  Select this if you are having
	  a problem with I2C support and want to see more of what is going
	  on.

J
Jan Engelhardt 已提交
817
endif # HWMON