miscController.strings

/* Class = "NSButtonCell"; title = "DEBUG_INFO in DEBUG, NOOPT"; ObjectID = "0hR-wG-mgt"; */
"0hR-wG-mgt.title" = "DEBUG_INFO in DEBUG, NOOPT";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable VirtualSMC-compatible authenticated restart.\nAuthenticated restart is a way to reboot FileVault 2 enabled macOS without entering the password. A dedicated terminal command can be used to perform authenticated restarts: sudo fdesetup authrestart. It is also used when installing operating system updates.\nVirtualSMC performs authenticated restart by saving disk encryption key split in NVRAM and RTC, which despite being removed as soon as OpenCore starts, may be considered a security risk and thus is optional."; ObjectID = "0sy-D3-AKk"; */
"0sy-D3-AKk.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Enable VirtualSMC-compatible authenticated restart.\nAuthenticated restart is a way to reboot FileVault 2 enabled macOS without entering the password. A dedicated terminal command can be used to perform authenticated restarts: sudo fdesetup authrestart. It is also used when installing operating system updates.\nVirtualSMC performs authenticated restart by saving disk encryption key split in NVRAM and RTC, which despite being removed as soon as OpenCore starts, may be considered a security risk and thus is optional.";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 64 bit\nFailsafe: 0\nDescription: Apple Enclave Identifier.\nSetting this value to any non-zero 64-bit integer will allow using personalised Apple Secure Boot identifiers. To use this setting, make sure to generate a random 64-bit number with a cryptographically secure random number generator. With this value set and SecureBootModel valid and not Disabled it is possible to achieve Full Security of Apple Secure Boot.\n\nTo start using personalised Apple Secure Boot, the operating system will have to be reinstalled or personalised. Unless the operating system is personalised, macOS DMG recovery cannot be loaded. If DMG recovery is missing, it can be downloaded with macrecovery utility and put to com.apple.recovery.boot as explained in Tips and Tricks section. Note that DMG loading needs to be set to Signed to use any DMG with Apple Secure Boot.\n\nTo personalise an existing operating system use bless command after loading to macOS DMG recovery. Mount the system volume partition, unless it has already been mounted, and execute the following command:\n\nbless bless --folder \"/Volumes/Macintosh HD/System/Library/CoreServices\" \\ --bootefi --personalize\n\nWhen reinstalling the operating system, note that current versions of macOS Installer, tested as of 10.15.6, will usually run out of free memory on the /var/tmp partition when trying to install macOS with the personalised Apple Secure Boot. Soon after downloading the macOS installer image an Unable to verify macOS error message will appear. To workaround this issue allocate a dedicated RAM disk of 2 MBs for macOS personalisation by entering the following commands in macOS recovery terminal before starting the installation:\n\ndisk=$(hdiutil attach -nomount ram://4096)\ndiskutil erasevolume HFS+ SecureBoot $disk\ndiskutil unmount $disk\nmkdir /var/tmp/OSPersonalizationTemp\ndiskutil mount -mountpoint /var/tmp/OSPersonalizationTemp $disk"; ObjectID = "0yA-ct-dgi"; */
"0yA-ct-dgi.ibShadowedToolTip" = "Type: plist integer, 64 bit\nFailsafe: 0\nDescription: Apple Enclave Identifier.\nSetting this value to any non-zero 64-bit integer will allow using personalised Apple Secure Boot identifiers. To use this setting, make sure to generate a random 64-bit number with a cryptographically secure random number generator. With this value set and SecureBootModel valid and not Disabled it is possible to achieve Full Security of Apple Secure Boot.\n\nTo start using personalised Apple Secure Boot, the operating system will have to be reinstalled or personalised. Unless the operating system is personalised, macOS DMG recovery cannot be loaded. If DMG recovery is missing, it can be downloaded with macrecovery utility and put to com.apple.recovery.boot as explained in Tips and Tricks section. Note that DMG loading needs to be set to Signed to use any DMG with Apple Secure Boot.\n\nTo personalise an existing operating system use bless command after loading to macOS DMG recovery. Mount the system volume partition, unless it has already been mounted, and execute the following command:\n\nbless bless --folder \"/Volumes/Macintosh HD/System/Library/CoreServices\" \\ --bootefi --personalize\n\nWhen reinstalling the operating system, note that current versions of macOS Installer, tested as of 10.15.6, will usually run out of free memory on the /var/tmp partition when trying to install macOS with the personalised Apple Secure Boot. Soon after downloading the macOS installer image an Unable to verify macOS error message will appear. To workaround this issue allocate a dedicated RAM disk of 2 MBs for macOS personalisation by entering the following commands in macOS recovery terminal before starting the installation:\n\ndisk=$(hdiutil attach -nomount ram://4096)\ndiskutil erasevolume HFS+ SecureBoot $disk\ndiskutil unmount $disk\nmkdir /var/tmp/OSPersonalizationTemp\ndiskutil mount -mountpoint /var/tmp/OSPersonalizationTemp $disk";

/* Class = "NSTableColumn"; headerCell.title = "Comment"; ObjectID = "1NZ-HO-WUF"; */
"1NZ-HO-WUF.headerCell.title" = "Comment";

/* Class = "NSTableColumn"; headerCell.title = "Auxiliary"; ObjectID = "1fY-U6-4KQ"; */
"1fY-U6-4KQ.headerCell.title" = "Auxiliary";

/* Class = "NSTableColumn"; headerCell.title = "Name"; ObjectID = "22Z-wl-E30"; */
"22Z-wl-E30.headerCell.title" = "Name";

/* Class = "NSButtonCell"; title = "Enable logging to Data Hub"; ObjectID = "2Qh-mc-sJw"; */
"2Qh-mc-sJw.title" = "Enable logging to Data Hub";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nDefault value: 0\nDescription: A bitmask (sum) of enabled logging targets. By default all the logging output is hidden, so this option is required to be set when debugging is necessary.\nThe following logging targets are supported:\n• 0x01 — Enable logging, otherwise all log is discarded.\n• 0x02 — Enable basic console (onscreen) logging.\n• 0x04 — Enable logging to Data Hub.\n• 0x08 — Enable serial port logging.\n• 0x10 — Enable UEFI variable logging.\n• 0x20 — Enable non-volatile UEFI variable logging.\n• 0x40 — Enable logging to file.\n\nConsole logging prints less than all the other variants. Depending on the build type (RELEASE, DEBUG, or NOOPT) different amount of logging may be read (from least to most)."; ObjectID = "2Vb-s2-Ejp"; */
"2Vb-s2-Ejp.ibShadowedToolTip" = "Type: plist integer\nDefault value: 0\nDescription: A bitmask (sum) of enabled logging targets. By default all the logging output is hidden, so this option is required to be set when debugging is necessary.\nThe following logging targets are supported:\n• 0x01 — Enable logging, otherwise all log is discarded.\n• 0x02 — Enable basic console (onscreen) logging.\n• 0x04 — Enable logging to Data Hub.\n• 0x08 — Enable serial port logging.\n• 0x10 — Enable UEFI variable logging.\n• 0x20 — Enable non-volatile UEFI variable logging.\n• 0x40 — Enable logging to file.\n\nConsole logging prints less than all the other variants. Depending on the build type (RELEASE, DEBUG, or NOOPT) different amount of logging may be read (from least to most).";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "2dj-hB-QBF"; */
"2dj-hB-QBF.title" = "Unselect All";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Save macOS kernel panic to OpenCore root partition.\nThe file is saved as panic-YYYY-MM-DD-HHMMSS.txt. It is strongly recommended to have keepsyms=1 boot argument to see debug symbols in the panic log. In case it was not present kpdescribe.sh utility (bundled with OpenCore) may be used to partially recover the stacktrace.\nDevelopment and debug kernels produce more helpful kernel panics. Consider downloading and installing\nKernelDebugKit from developer.apple.com when debugging a problem. To activate a development kernel the boot argument kcsuffix=development should be added. Use uname -a command to ensure that the current loaded kernel is a development (or a debug) kernel.\nIn case OpenCore kernel panic saving mechanism was not used, kernel panics may still be found in /Library/Logs/Diagnostic directory. Starting with macOS Catalina kernel panics are stored in JSON format, so they need to be preprocessedbefore passing to kpdescribe.sh: \ncat Kernel.panic | grep macOSProcessedStackshotData | python -c 'import json,sys;print(json.load(sys.stdin)[\"macOSPanicString\"])'"; ObjectID = "2lk-2r-hIW"; */
"2lk-2r-hIW.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Save macOS kernel panic to OpenCore root partition.\nThe file is saved as panic-YYYY-MM-DD-HHMMSS.txt. It is strongly recommended to have keepsyms=1 boot argument to see debug symbols in the panic log. In case it was not present kpdescribe.sh utility (bundled with OpenCore) may be used to partially recover the stacktrace.\nDevelopment and debug kernels produce more helpful kernel panics. Consider downloading and installing\nKernelDebugKit from developer.apple.com when debugging a problem. To activate a development kernel the boot argument kcsuffix=development should be added. Use uname -a command to ensure that the current loaded kernel is a development (or a debug) kernel.\nIn case OpenCore kernel panic saving mechanism was not used, kernel panics may still be found in /Library/Logs/Diagnostic directory. Starting with macOS Catalina kernel panics are stored in JSON format, so they need to be preprocessedbefore passing to kpdescribe.sh: \ncat Kernel.panic | grep macOSProcessedStackshotData | python -c 'import json,sys;print(json.load(sys.stdin)[\"macOSPanicString\"])'";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "3K9-EU-jse"; */
"3K9-EU-jse.title" = "Select All";

/* Class = "NSTableColumn"; headerCell.title = "TextMode"; ObjectID = "3a7-m4-eNo"; */
"3a7-m4-eNo.headerCell.title" = "TextMode";

/* Class = "NSTabViewItem"; label = "Boot"; ObjectID = "3fm-9G-OpP"; */
"3fm-9G-OpP.label" = "Boot";

/* Class = "NSTabViewItem"; label = "Security"; ObjectID = "3fm-Nz-fHj"; */
"3fm-Nz-fHj.label" = "Security";

/* Class = "NSTextFieldCell"; title = "PickerVariant"; ObjectID = "4Mc-Dm-vYw"; */
"4Mc-Dm-vYw.title" = "PickerVariant";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: Builtin\nDescription: Choose boot picker used for boot management.\nPicker describes underlying boot management with an optional user interface responsible for handling boot\noptions. The following values are supported:\n• Builtin — boot management is handled by OpenCore, a simple text only user interface is used.\n• External — an external boot management protocol is used if available. Otherwise Builtin mode is used.\n• Apple — Apple boot management is used if available. Otherwise Builtin mode is used.\n\nUpon success External mode will entirely disable all boot management in OpenCore except policy enforcement. See OpenCanopy plugin for an example of a custom user interface.\nOpenCore built-in boot picker contains a set of actions chosen during the boot process. The list of supported actions is similar to Apple BDS and in general can be accessed by holding action hotkeys during boot process. Currently the following actions are considered:\n• Default — this is the default option, and it lets OpenCore built-in boot picker to loads the default boot option as specified in Startup Disk preference pane.\n• ShowPicker — this option forces picker to show. Normally it can be achieved by holding OPT key during boot. Setting ShowPicker to true will make ShowPicker the default option.\n• ResetNvram — this option performs select UEFI variable erase and is normally achieved by holding CMD+OPT+P+R key combination during boot. Another way to erase UEFI variables is to choose Reset NVRAM in the picker. This option requires AllowNvramReset to be set to true.\n• BootApple — this options performs booting to the first found Apple operating system unless the default chosen operating system is already made by Apple. Hold X key to choose this option.\n• BootAppleRecovery — this option performs booting to Apple operating system recovery. Either the one related to the default chosen operating system, or first found in case default chosen operating system is not made by Apple or has no recovery. Hold CMD+R key combination to choose this option.\n\nNote 1: Activated KeySupport, OpenUsbKbDxe, or similar driver is required for key handling to work. On several types of firmware, it is not possible to get all the key functions.\n\nNote 2: In addition to OPT OpenCore supports Escape key to display picker when ShowPicker is disabled. This key exists for Apple picker mode and for firmware with PS/2 keyboards that fail to report held OPT keys and requiring continual presses of the Escape key to access the boot menu.\n\nNote 3: On Macs with problematic GOP, it may be difficult to access the Apple BootPicker. The BootKicker utility can be blessed to workaround this problem even without loading OpenCore. On some Macs however, the BootKicker utility cannot be run from OpenCore."; ObjectID = "5Or-M0-hZS"; */
"5Or-M0-hZS.ibShadowedToolTip" = "Type: plist string\nFailsafe: Builtin\nDescription: Choose boot picker used for boot management.\nPicker describes underlying boot management with an optional user interface responsible for handling boot\noptions. The following values are supported:\n• Builtin — boot management is handled by OpenCore, a simple text only user interface is used.\n• External — an external boot management protocol is used if available. Otherwise Builtin mode is used.\n• Apple — Apple boot management is used if available. Otherwise Builtin mode is used.\n\nUpon success External mode will entirely disable all boot management in OpenCore except policy enforcement. See OpenCanopy plugin for an example of a custom user interface.\nOpenCore built-in boot picker contains a set of actions chosen during the boot process. The list of supported actions is similar to Apple BDS and in general can be accessed by holding action hotkeys during boot process. Currently the following actions are considered:\n• Default — this is the default option, and it lets OpenCore built-in boot picker to loads the default boot option as specified in Startup Disk preference pane.\n• ShowPicker — this option forces picker to show. Normally it can be achieved by holding OPT key during boot. Setting ShowPicker to true will make ShowPicker the default option.\n• ResetNvram — this option performs select UEFI variable erase and is normally achieved by holding CMD+OPT+P+R key combination during boot. Another way to erase UEFI variables is to choose Reset NVRAM in the picker. This option requires AllowNvramReset to be set to true.\n• BootApple — this options performs booting to the first found Apple operating system unless the default chosen operating system is already made by Apple. Hold X key to choose this option.\n• BootAppleRecovery — this option performs booting to Apple operating system recovery. Either the one related to the default chosen operating system, or first found in case default chosen operating system is not made by Apple or has no recovery. Hold CMD+R key combination to choose this option.\n\nNote 1: Activated KeySupport, OpenUsbKbDxe, or similar driver is required for key handling to work. On several types of firmware, it is not possible to get all the key functions.\n\nNote 2: In addition to OPT OpenCore supports Escape key to display picker when ShowPicker is disabled. This key exists for Apple picker mode and for firmware with PS/2 keyboards that fail to report held OPT keys and requiring continual presses of the Escape key to access the boot menu.\n\nNote 3: On Macs with problematic GOP, it may be difficult to access the Apple BootPicker. The BootKicker utility can be blessed to workaround this problem even without loading OpenCore. On some Macs however, the BootKicker utility cannot be run from OpenCore.";

/* Class = "NSButtonCell"; title = "Enable UEFI variable logging"; ObjectID = "6U3-np-fQe"; */
"6U3-np-fQe.title" = "Enable UEFI variable logging";

/* Class = "NSTextFieldCell"; title = "Timeout"; ObjectID = "6hf-UH-eBA"; */
"6hf-UH-eBA.title" = "Timeout";

/* Class = "NSButtonCell"; title = "HideAuxiliary"; ObjectID = "7BP-eo-vIZ"; */
"7BP-eo-vIZ.title" = "HideAuxiliary";

/* Class = "NSTableColumn"; headerCell.title = "RealPath"; ObjectID = "7JW-1n-ZBx"; */
"7JW-1n-ZBx.headerCell.title" = "RealPath";

/* Class = "NSButtonCell"; title = "Expose OpenCore version in boot picker menu title."; ObjectID = "7NC-lm-XEM"; */
"7NC-lm-XEM.title" = "Expose OpenCore version in boot picker menu title.";

/* Class = "NSTableView"; ibShadowedToolTip = "1. Arguments\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n3. Comment\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. Whether this value is used is implementation defined.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty\nDescription: Human readable entry name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty\nDescription: Entry location depending on entry type.\n• Entries specify external boot options, and therefore take device paths in Path key. These values are not checked, thus be extremely careful. Example: PciRoot(0x0)/Pci(0x1,0x1)/.../\\EFI\\COOL.EFI\n• Tools specify internal boot options, which are part of bootloader vault, and therefore take file paths relative to OC/Tools directory. Example: OpenShell.efi.\n7. TextMode\nType: plist boolean\nFailsafe: false\nDescription: Run the entry in text mode instead of graphics mode."; ObjectID = "8Gl-6A-OsL"; */
"8Gl-6A-OsL.ibShadowedToolTip" = "1. Arguments\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n3. Comment\nType: plist string\nFailsafe: Empty\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. Whether this value is used is implementation defined.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty\nDescription: Human readable entry name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty\nDescription: Entry location depending on entry type.\n• Entries specify external boot options, and therefore take device paths in Path key. These values are not checked, thus be extremely careful. Example: PciRoot(0x0)/Pci(0x1,0x1)/.../\\EFI\\COOL.EFI\n• Tools specify internal boot options, which are part of bootloader vault, and therefore take file paths relative to OC/Tools directory. Example: OpenShell.efi.\n7. TextMode\nType: plist boolean\nFailsafe: false\nDescription: Run the entry in text mode instead of graphics mode.";

/* Class = "NSTextFieldCell"; title = "PasswordSalt"; ObjectID = "8Xp-t8-QVB"; */
"8Xp-t8-QVB.title" = "PasswordSalt";

/* Class = "NSButtonCell"; title = "Disable WatchDog"; ObjectID = "9LG-wP-7Np"; */
"9LG-wP-7Np.title" = "Disable WatchDog";

/* Class = "NSTextFieldCell"; title = "ApECID"; ObjectID = "A2A-xj-Bmf"; */
"A2A-xj-Bmf.title" = "ApECID";

/* Class = "NSButtonCell"; title = "DEBUG_WARN in DEBUG, NOOPT, RELEASE"; ObjectID = "AEq-Xa-8FR"; */
"AEq-Xa-8FR.title" = "DEBUG_WARN in DEBUG, NOOPT, RELEASE";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "Ai7-te-FXf"; */
"Ai7-te-FXf.title" = "Select All";

/* Class = "NSTextFieldCell"; title = "Picker Mode"; ObjectID = "BYc-kG-loi"; */
"BYc-kG-loi.title" = "Picker Mode";

/* Class = "NSButtonCell"; title = "Expose OpenCore version as an UEFI variable."; ObjectID = "Bcn-4Z-d2d"; */
"Bcn-4Z-d2d.title" = "Expose OpenCore version as an UEFI variable.";

/* Class = "NSButtonCell"; title = "Scan/Browse"; ObjectID = "Bpe-6y-ybA"; */
"Bpe-6y-ybA.title" = "Scan/Browse";

/* Class = "NSTextFieldCell"; title = "Expose Sensitive Data"; ObjectID = "DAS-KM-gwG"; */
"DAS-KM-gwG.title" = "Expose Sensitive Data";

/* Class = "NSButtonCell"; title = "Enable non-volatile UEFI variable logging"; ObjectID = "Da8-bR-9wd"; */
"Da8-bR-9wd.title" = "Enable non-volatile UEFI variable logging";

/* Class = "NSTableView"; ibShadowedToolTip = "Type: plist array\nDescription: Add custom scanning paths through bless model.\n\nDesigned to be filled with plist string entries containing absolute UEFI paths to customised bootloaders, for example, \\EFI\\debian\\grubx64.efi for Debian bootloader. This allows unusual boot paths to be automaticlly automatically discovered by the boot picker. Designwise they are equivalent to predefined blessed path, such as \\System\\Library\\CoreServices\\boot.efi or \\EFI\\Microsoft\\Boot\\bootmgfw.efi, but unlike predefined bless paths they have highest priority."; ObjectID = "E7L-MW-EuK"; */
"E7L-MW-EuK.ibShadowedToolTip" = "Type: plist array\nDescription: Add custom scanning paths through bless model.\n\nDesigned to be filled with plist string entries containing absolute UEFI paths to customised bootloaders, for example, \\EFI\\debian\\grubx64.efi for Debian bootloader. This allows unusual boot paths to be automaticlly automatically discovered by the boot picker. Designwise they are equivalent to predefined blessed path, such as \\System\\Library\\CoreServices\\boot.efi or \\EFI\\Microsoft\\Boot\\bootmgfw.efi, but unlike predefined bless paths they have highest priority.";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_ESP"; ObjectID = "Edm-Vw-KuX"; */
"Edm-Vw-KuX.title" = "OC_SCAN_ALLOW_FS_ESP";

/* Class = "NSTextFieldCell"; title = "Display Delay"; ObjectID = "FHv-7q-Wq3"; */
"FHv-7q-Wq3.title" = "Display Delay";

/* Class = "NSButtonCell"; title = "SysReport"; ObjectID = "GOG-QD-oyI"; */
"GOG-QD-oyI.title" = "SysReport";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "Gaf-gn-k6J"; */
"Gaf-gn-k6J.title" = "Select All";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_EXT"; ObjectID = "H6a-QA-xQu"; */
"H6a-QA-xQu.title" = "OC_SCAN_ALLOW_FS_EXT";

/* Class = "NSButtonCell"; title = "Enable serial port logging"; ObjectID = "HjZ-gH-Q0b"; */
"HjZ-gH-Q0b.title" = "Enable serial port logging";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_PCI"; ObjectID = "I0K-dq-ofU"; */
"I0K-dq-ofU.title" = "OC_SCAN_ALLOW_DEVICE_PCI";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: Disabled\nDescription: Register launcher option in firmware preferences for persistence.\nValid values:\n• Disabled — do nothing.\n• Full — create or update top-priority boot option in UEFI variable storage at bootloader startup. For this option to work RequestBootVarRouting is required to be enabled.\n• Short — create a short boot option instead of a complete one. This variant is useful for some older firmwares, Insyde in particular, but possibly others, which cannot handle full device paths.\n\nThis option provides integration with third-party operating system installation and upgrade at the times they overwrite \\EFI\\BOOT\\BOOTx64.efi file. By creating a custom option in this file path becomes no longer used for bootstrapping OpenCore. The path used for bootstrapping is specified in LauncherPath option.\n\nNote 1: Some types of firmware may have faulty NVRAM, no boot option support, or other incompatibilities. While unlikely, the use of this option may even cause boot failures. This option should be used without any warranty exclusively on the boards known to be compatible.\n\nNote 2: Be aware that while NVRAM reset executed from OpenCore should not erase the boot option created in Bootstrap, executing NVRAM reset prior to loading OpenCore will remove it. For significant implementation updates (e.g. in OpenCore 0.6.4) make sure to perform NVRAM reset with Bootstrap disabled before reenabling."; ObjectID = "IqM-FZ-Tdv"; */
"IqM-FZ-Tdv.ibShadowedToolTip" = "Type: plist string\nFailsafe: Disabled\nDescription: Register launcher option in firmware preferences for persistence.\nValid values:\n• Disabled — do nothing.\n• Full — create or update top-priority boot option in UEFI variable storage at bootloader startup. For this option to work RequestBootVarRouting is required to be enabled.\n• Short — create a short boot option instead of a complete one. This variant is useful for some older firmwares, Insyde in particular, but possibly others, which cannot handle full device paths.\n\nThis option provides integration with third-party operating system installation and upgrade at the times they overwrite \\EFI\\BOOT\\BOOTx64.efi file. By creating a custom option in this file path becomes no longer used for bootstrapping OpenCore. The path used for bootstrapping is specified in LauncherPath option.\n\nNote 1: Some types of firmware may have faulty NVRAM, no boot option support, or other incompatibilities. While unlikely, the use of this option may even cause boot failures. This option should be used without any warranty exclusively on the boards known to be compatible.\n\nNote 2: Be aware that while NVRAM reset executed from OpenCore should not erase the boot option created in Bootstrap, executing NVRAM reset prior to loading OpenCore will remove it. For significant implementation updates (e.g. in OpenCore 0.6.4) make sure to perform NVRAM reset with Bootstrap disabled before reenabling.";

/* Class = "NSButtonCell"; title = "AllowNvramReset"; ObjectID = "Jpe-QB-x2r"; */
"Jpe-QB-x2r.title" = "AllowNvramReset";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "KRE-fs-cVq"; */
"KRE-fs-cVq.title" = "Unselect All";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: Signed\nDescription: Define Disk Image (DMG) loading policy used for macOS Recovery.\n\nValid values:\n• Disabled — loading DMG images will fail. Disabled policy will still let macOS Recovery to load in most cases as there usually are boot.efi files compatible with Apple Secure Boot. Manually images stored in com.apple.recovery.boot directories will not load, however.\n• Signed — only Apple-signed DMG images will load. Due to Apple Secure Boot design Signed policy will let any Apple-signed macOS Recovery to load regardless of Apple Secure Boot state, which may not always be desired.\n• Any — any DMG images will mount as normal filesystems. Any policy is strongly not recommended and will cause a boot failure when Apple Secure Boot is activated."; ObjectID = "KUQ-Na-LT4"; */
"KUQ-Na-LT4.ibShadowedToolTip" = "Type: plist string\nFailsafe: Signed\nDescription: Define Disk Image (DMG) loading policy used for macOS Recovery.\n\nValid values:\n• Disabled — loading DMG images will fail. Disabled policy will still let macOS Recovery to load in most cases as there usually are boot.efi files compatible with Apple Secure Boot. Manually images stored in com.apple.recovery.boot directories will not load, however.\n• Signed — only Apple-signed DMG images will load. Due to Apple Secure Boot design Signed policy will let any Apple-signed macOS Recovery to load regardless of Apple Secure Boot state, which may not always be desired.\n• Any — any DMG images will mount as normal filesystems. Any policy is strongly not recommended and will cause a boot failure when Apple Secure Boot is activated.";

/* Class = "NSButtonCell"; title = "Provides custom rendered titles for boot entries"; ObjectID = "L3h-6q-xRi"; */
"L3h-6q-xRi.title" = "Provides custom rendered titles for boot entries";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Some types of firmware may not succeed in booting the operating system quickly, especially in debug mode, which results the watchdog timer aborting the process. This option turns off the watchdog timer."; ObjectID = "LCd-qL-7KC"; */
"LCd-qL-7KC.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Some types of firmware may not succeed in booting the operating system quickly, especially in debug mode, which results the watchdog timer aborting the process. This option turns off the watchdog timer.";

/* Class = "NSComboBox"; ibShadowedToolTip = "Type: plist string\nFailsafe: Auto\nDescription: Choose specific icon set used for boot management.\n\nThe following values are supported:\n• Auto — Automatically select one set of icons based on DefaultBackground colour.\n• Default — Normal icon set (without prefix).\n• Old — Vintage icon set (Old filename prefix).\n• Modern — Nouveau icon set (Modern filename prefix).\n• Other value — Custom icon set if supported by the resources."; ObjectID = "M7r-QM-SNm"; */
"M7r-QM-SNm.ibShadowedToolTip" = "Type: plist string\nFailsafe: Auto\nDescription: Choose specific icon set used for boot management.\n\nThe following values are supported:\n• Auto — Automatically select one set of icons based on DefaultBackground colour.\n• Default — Normal icon set (without prefix).\n• Old — Vintage icon set (Old filename prefix).\n• Modern — Nouveau icon set (Modern filename prefix).\n• Other value — Custom icon set if supported by the resources.";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist data 64 bytes\nFailsafe: all zero\nDescription: Password hash used when EnabledPassword is set."; ObjectID = "NCW-lH-X8S"; */
"NCW-lH-X8S.ibShadowedToolTip" = "Type: plist data 64 bytes\nFailsafe: all zero\nDescription: Password hash used when EnabledPassword is set.";

/* Class = "NSButtonCell"; title = "Prefers builtin icons for certain icon categories to match the theme style"; ObjectID = "NFd-Yp-DAy"; */
"NFd-Yp-DAy.title" = "Prefers builtin icons for certain icon categories to match the theme style";

/* Class = "NSTableColumn"; headerCell.title = "Enabled"; ObjectID = "NXw-uw-Jsu"; */
"NXw-uw-Jsu.headerCell.title" = "Enabled";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Ignore boot options trying to update Apple peripheral firmware (e.g. MultiUpdater.efi).\n\nNote: This option exists due to some operating systems, namely macOS Big Sur, being incapable of disabling firmware updates with the NVRAM variable (run-efi-updater)."; ObjectID = "Nph-Bb-8b6"; */
"Nph-Bb-8b6.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Ignore boot options trying to update Apple peripheral firmware (e.g. MultiUpdater.efi).\n\nNote: This option exists due to some operating systems, namely macOS Big Sur, being incapable of disabling firmware updates with the NVRAM variable (run-efi-updater).";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable screen reader by default in boot picker.\nFor macOS bootloader screen reader preference is set in preferences.efires archive in isVOEnabled.int32 file and is controlled by the operating system. For OpenCore screen reader support this option is an independent equivalent. Toggling screen reader support in both OpenCore boot picker and macOS bootloader FileVault 2 login window can also be done with Command + F5 key combination.\nNote: screen reader requires working audio support, see UEFI Audio Properties section for more details."; ObjectID = "PDS-bo-Qx8"; */
"PDS-bo-Qx8.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Enable screen reader by default in boot picker.\nFor macOS bootloader screen reader preference is set in preferences.efires archive in isVOEnabled.int32 file and is controlled by the operating system. For OpenCore screen reader support this option is an independent equivalent. Toggling screen reader support in both OpenCore boot picker and macOS bootloader FileVault 2 login window can also be done with Command + F5 key combination.\nNote: screen reader requires working audio support, see UEFI Audio Properties section for more details.";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "PDr-JO-EKf"; */
"PDr-JO-EKf.title" = "Unselect All";

/* Class = "NSTextFieldCell"; title = "ConsoleAttributes"; ObjectID = "PIX-Ia-ajs"; */
"PIX-Ia-ajs.title" = "ConsoleAttributes";

/* Class = "NSButtonCell"; title = "BlacklistAppleUpdate"; ObjectID = "PPp-Ea-yQN"; */
"PPp-Ea-yQN.title" = "BlacklistAppleUpdate";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable password protection to allow sensitive operations.\n\nPassword protection ensures that sensitive operations such as booting a non-default operating system (e.g. macOS recovery or a tool), resetting NVRAM storage, trying to boot into a non-default mode (e.g. verbose mode or safe mode) are not allowed without explicit user authentication by a custom password. Currently password and salt are hashed with 5000000 iterations of SHA-512.\n\nNote: This functionality is currently in development and is not ready for daily usage."; ObjectID = "PbU-if-N7O"; */
"PbU-if-N7O.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Enable password protection to allow sensitive operations.\n\nPassword protection ensures that sensitive operations such as booting a non-default operating system (e.g. macOS recovery or a tool), resetting NVRAM storage, trying to boot into a non-default mode (e.g. verbose mode or safe mode) are not allowed without explicit user authentication by a custom password. Currently password and salt are hashed with 5000000 iterations of SHA-512.\n\nNote: This functionality is currently in development and is not ready for daily usage.";

/* Class = "NSButtonCell"; title = "Browse"; ObjectID = "Pkl-Zl-stw"; */
"Pkl-Zl-stw.title" = "Browse";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nDefault value: 0\nDescription: Delay in microseconds performed after every printed line visible onscreen (i.e. console)."; ObjectID = "PwU-cB-LIO"; */
"PwU-cB-LIO.ibShadowedToolTip" = "Type: plist integer\nDefault value: 0\nDescription: Delay in microseconds performed after every printed line visible onscreen (i.e. console).";

/* Class = "NSTextField"; ibShadowedToolTip = "TakeoffDelay \nType: plist integer, 32 bit \nFailsafe: 0\nDescription: Delay in microseconds performed before handling picker startup and action hotkeys. \nIntroducing a delay may give extra time to hold the right action hotkey sequence to e.g. boot to recovery mode. On some platforms setting this option to at least 5000-10000 microseconds may be necessary to access action hotkeys at all due to the nature of the keyboard driver."; ObjectID = "QGG-If-K71"; */
"QGG-If-K71.ibShadowedToolTip" = "TakeoffDelay \nType: plist integer, 32 bit \nFailsafe: 0\nDescription: Delay in microseconds performed before handling picker startup and action hotkeys. \nIntroducing a delay may give extra time to hold the right action hotkey sequence to e.g. boot to recovery mode. On some platforms setting this option to at least 5000-10000 microseconds may be necessary to access action hotkeys at all due to the nature of the keyboard driver.";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: Secure\nDescription: Enables vaulting mechanism in OpenCore.\nValid values:\n• Optional — require nothing, no vault is enforced, insecure.\n• Basic — require vault.plist file present in OC directory. This provides basic filesystem integrity verification and may protect from unintentional filesystem corruption.\n• Secure — require vault.sig signature file for vault.plist in OC directory. This includes Basic integrity checking but also attempts to build a trusted bootchain.\nvault.plist file should contain SHA-256 hashes for all files used by OpenCore. Presence of this file is highly recommended to ensure that unintentional file modifications (including filesystem corruption) do not happen unnoticed. To create this file automatically use create_vault.sh script. Regardless of the underlying filesystem, path name and case must match between config.plist and vault.plist.\n\nvault.sig file should contain a raw 256 byte RSA-2048 signature from SHA-256 hash of vault.plist. The signature is verified against the public key embedded into OpenCore.efi. To embed the public key either of the following should be performed:\n• Provide public key during the OpenCore.efi compilation in OpenCoreVault.c file.\n• Binary patch OpenCore.efi replacing zeroes with the public key between =BEGIN OC VAULT= and ==END OC VAULT== ASCII markers.\nRSA public key 520 byte format description can be found in Chromium OS documentation. To convert public key from X.509 certificate or from PEM file use RsaTool.\n\nThe complete set of commands to:\n• Create vault.plist.\n• Create a new RSA key (always do this to avoid loading old configuration).\n• Embed RSA key into OpenCore.efi.\n• Create vault.sig.\n\nCan look as follows:\ncd /Volumes/EFI/EFI/OC/path/to/create_vault.sh .\n/path/to/RsaTool -sign vault.plist vault.sig vault.pub\noff=$(($(strings -a -t d OpenCore.efi | grep \"=BEGIN OC VAULT=\" | cut -f1 -d' ')+16))\ndd of=OpenCore.efi if=vault.pub bs=1 seek=$off count=528 conv=notrunc\nrm vault.pub\n\nNote 1: While it may appear obvious, an external method is required to verify OpenCore.efi and BOOTx64.efi for secure boot path. For this, it is recommended to enable UEFI SecureBoot using a custom certificate and to sign OpenCore.efi and BOOTx64.efi with a custom key. More details on customising secure boot on modern firmware can be found in Taming UEFI SecureBoot paper (in Russian).\n\nNote 2: vault.plist and vault.sig are used regardless of this option when vault.plist is present or public key is embedded into OpenCore.efi. Setting this option will only ensure configuration sanity, and abort the boot process otherwise."; ObjectID = "QZk-2b-TCx"; */
"QZk-2b-TCx.ibShadowedToolTip" = "Type: plist string\nFailsafe: Secure\nDescription: Enables vaulting mechanism in OpenCore.\nValid values:\n• Optional — require nothing, no vault is enforced, insecure.\n• Basic — require vault.plist file present in OC directory. This provides basic filesystem integrity verification and may protect from unintentional filesystem corruption.\n• Secure — require vault.sig signature file for vault.plist in OC directory. This includes Basic integrity checking but also attempts to build a trusted bootchain.\nvault.plist file should contain SHA-256 hashes for all files used by OpenCore. Presence of this file is highly recommended to ensure that unintentional file modifications (including filesystem corruption) do not happen unnoticed. To create this file automatically use create_vault.sh script. Regardless of the underlying filesystem, path name and case must match between config.plist and vault.plist.\n\nvault.sig file should contain a raw 256 byte RSA-2048 signature from SHA-256 hash of vault.plist. The signature is verified against the public key embedded into OpenCore.efi. To embed the public key either of the following should be performed:\n• Provide public key during the OpenCore.efi compilation in OpenCoreVault.c file.\n• Binary patch OpenCore.efi replacing zeroes with the public key between =BEGIN OC VAULT= and ==END OC VAULT== ASCII markers.\nRSA public key 520 byte format description can be found in Chromium OS documentation. To convert public key from X.509 certificate or from PEM file use RsaTool.\n\nThe complete set of commands to:\n• Create vault.plist.\n• Create a new RSA key (always do this to avoid loading old configuration).\n• Embed RSA key into OpenCore.efi.\n• Create vault.sig.\n\nCan look as follows:\ncd /Volumes/EFI/EFI/OC/path/to/create_vault.sh .\n/path/to/RsaTool -sign vault.plist vault.sig vault.pub\noff=$(($(strings -a -t d OpenCore.efi | grep \"=BEGIN OC VAULT=\" | cut -f1 -d' ')+16))\ndd of=OpenCore.efi if=vault.pub bs=1 seek=$off count=528 conv=notrunc\nrm vault.pub\n\nNote 1: While it may appear obvious, an external method is required to verify OpenCore.efi and BOOTx64.efi for secure boot path. For this, it is recommended to enable UEFI SecureBoot using a custom certificate and to sign OpenCore.efi and BOOTx64.efi with a custom key. More details on customising secure boot on modern firmware can be found in Taming UEFI SecureBoot paper (in Russian).\n\nNote 2: vault.plist and vault.sig are used regardless of this option when vault.plist is present or public key is embedded into OpenCore.efi. Setting this option will only ensure configuration sanity, and abort the boot process otherwise.";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 64 bit\nDefault value: 0x80000000 (DEBUG_ERROR)\nDescription: EDK II debug level bitmask (sum) causing CPU to halt (stop execution) after obtaining a message of HaltLevel. Possible values match DisplayLevel values."; ObjectID = "QbL-ID-H0a"; */
"QbL-ID-H0a.ibShadowedToolTip" = "Type: plist integer, 64 bit\nDefault value: 0x80000000 (DEBUG_ERROR)\nDescription: EDK II debug level bitmask (sum) causing CPU to halt (stop execution) after obtaining a message of HaltLevel. Possible values match DisplayLevel values.";

/* Class = "NSButtonCell"; title = "Expose OEM information as a set of UEFI variables."; ObjectID = "SLo-CJ-cas"; */
"SLo-CJ-cas.title" = "Expose OEM information as a set of UEFI variables.";

/* Class = "NSTableColumn"; headerCell.title = "Enabled"; ObjectID = "SPw-C4-qwL"; */
"SPw-C4-qwL.headerCell.title" = "Enabled";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "SZj-0R-9Uu"; */
"SZj-0R-9Uu.title" = "Unselect All";

/* Class = "NSButtonCell"; title = "PollAppleHotKeys"; ObjectID = "TDv-Al-hb0"; */
"TDv-Al-hb0.title" = "PollAppleHotKeys";

/* Class = "NSTableColumn"; headerCell.title = "Arguments"; ObjectID = "ThF-JP-r8K"; */
"ThF-JP-r8K.headerCell.title" = "Arguments";

/* Class = "NSTextFieldCell"; title = "Hibernate Mode"; ObjectID = "TmR-t7-bmq"; */
"TmR-t7-bmq.title" = "Hibernate Mode";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist string\nFailsafe: Default\nDescription: Launch path for LauncherOption.\n\nDefault stays for launched OpenCore.efi, any other path, e.g. \\EFI\\Launcher.efi, can be used to provide custom loaders, which are supposed to load OpenCore.efi themselves."; ObjectID = "Uqn-Ww-mAH"; */
"Uqn-Ww-mAH.ibShadowedToolTip" = "Type: plist string\nFailsafe: Default\nDescription: Launch path for LauncherOption.\n\nDefault stays for launched OpenCore.efi, any other path, e.g. \\EFI\\Launcher.efi, can be used to provide custom loaders, which are supposed to load OpenCore.efi themselves.";

/* Class = "NSButtonCell"; title = "Enable logging to file"; ObjectID = "Uz7-yL-WDQ"; */
"Uz7-yL-WDQ.title" = "Enable logging to file";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 32 bit\nDefault value: 0x10F0103\nDescription: Define operating system detection policy.\nThis value allows to prevent scanning (and booting) from untrusted source based on a bitmask (sum) of select flags. As it is not possible to reliably detect every file system or device type, this feature cannot be fully relied upon in open environments, and the additional measures are to be applied.\nThird party drivers may introduce additional security (and performance) measures following the provided scan policy. Scan policy is exposed in scan-policy variable of 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102 GUID for UEFI Boot Services only.\n• 0x00000001 — OC_SCAN_FILE_SYSTEM_LOCK, restricts scanning to only known file systems defined as a part of this policy. File system drivers may not be aware of this policy, and to avoid mounting of undesired file systems it is best not to load its driver. This bit does not affect dmg mounting, which may have any file system. Known file systems are prefixed with OC_SCAN_ALLOW_FS_.\n• 0x00000002 — OC_SCAN_DEVICE_LOCK, restricts scanning to only known device types defined as a part of this policy. This is not always possible to detect protocol tunneling, so be aware that on some systems it may be possible for e.g. USB HDDs to be recognised as SATA. Cases like this must be reported. Known device types are prefixed with OC_SCAN_ALLOW_DEVICE_.\n• 0x00000100 — OC_SCAN_ALLOW_FS_APFS, allows scanning of APFS file system.\n• 0x00010000 — OC_SCAN_ALLOW_DEVICE_SATA, allow scanning SATA devices.\n• 0x00020000 — OC_SCAN_ALLOW_DEVICE_SASEX, allow scanning SAS and Mac NVMe devices.\n• 0x00040000 — OC_SCAN_ALLOW_DEVICE_SCSI, allow scanning SCSI devices.\n• 0x00080000 — OC_SCAN_ALLOW_DEVICE_NVME, allow scanning NVMe devices.\n• 0x00100000 — OC_SCAN_ALLOW_DEVICE_ATAPI, allow scanning CD/DVD devices and old SATA.\n• 0x00200000 — OC_SCAN_ALLOW_DEVICE_USB, allow scanning USB devices.\n• 0x00400000 — OC_SCAN_ALLOW_DEVICE_FIREWIRE, allow scanning FireWire devices.\n• 0x00800000 — OC_SCAN_ALLOW_DEVICE_SDCARD, allow scanning card reader devices.\n• 0x01000000 (bit 24) — OC_SCAN_ALLOW_DEVICE_PCI, allow scanning devices directly connected to PCI bus (e.g. VIRTIO).\n\nNote: Given the above description, 0xF0103 value is expected to allow scanning of SATA, SAS, SCSI, and NVMe devices with APFS file system, and prevent scanning of any devices with HFS or FAT32 file systems in addition to not scanning APFS file systems on USB, CD, USB, and FireWire drives. The combination reads as:\n• OC_SCAN_FILE_SYSTEM_LOCK • OC_SCAN_DEVICE_LOCK\n• OC_SCAN_ALLOW_FS_APFS\n• OC_SCAN_ALLOW_DEVICE_SATA\n• OC_SCAN_ALLOW_DEVICE_SASEX\n• OC_SCAN_ALLOW_DEVICE_SCSI • OC_SCAN_ALLOW_DEVICE_NVME"; ObjectID = "VQF-Ne-GWu"; */
"VQF-Ne-GWu.ibShadowedToolTip" = "Type: plist integer, 32 bit\nDefault value: 0x10F0103\nDescription: Define operating system detection policy.\nThis value allows to prevent scanning (and booting) from untrusted source based on a bitmask (sum) of select flags. As it is not possible to reliably detect every file system or device type, this feature cannot be fully relied upon in open environments, and the additional measures are to be applied.\nThird party drivers may introduce additional security (and performance) measures following the provided scan policy. Scan policy is exposed in scan-policy variable of 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102 GUID for UEFI Boot Services only.\n• 0x00000001 — OC_SCAN_FILE_SYSTEM_LOCK, restricts scanning to only known file systems defined as a part of this policy. File system drivers may not be aware of this policy, and to avoid mounting of undesired file systems it is best not to load its driver. This bit does not affect dmg mounting, which may have any file system. Known file systems are prefixed with OC_SCAN_ALLOW_FS_.\n• 0x00000002 — OC_SCAN_DEVICE_LOCK, restricts scanning to only known device types defined as a part of this policy. This is not always possible to detect protocol tunneling, so be aware that on some systems it may be possible for e.g. USB HDDs to be recognised as SATA. Cases like this must be reported. Known device types are prefixed with OC_SCAN_ALLOW_DEVICE_.\n• 0x00000100 — OC_SCAN_ALLOW_FS_APFS, allows scanning of APFS file system.\n• 0x00010000 — OC_SCAN_ALLOW_DEVICE_SATA, allow scanning SATA devices.\n• 0x00020000 — OC_SCAN_ALLOW_DEVICE_SASEX, allow scanning SAS and Mac NVMe devices.\n• 0x00040000 — OC_SCAN_ALLOW_DEVICE_SCSI, allow scanning SCSI devices.\n• 0x00080000 — OC_SCAN_ALLOW_DEVICE_NVME, allow scanning NVMe devices.\n• 0x00100000 — OC_SCAN_ALLOW_DEVICE_ATAPI, allow scanning CD/DVD devices and old SATA.\n• 0x00200000 — OC_SCAN_ALLOW_DEVICE_USB, allow scanning USB devices.\n• 0x00400000 — OC_SCAN_ALLOW_DEVICE_FIREWIRE, allow scanning FireWire devices.\n• 0x00800000 — OC_SCAN_ALLOW_DEVICE_SDCARD, allow scanning card reader devices.\n• 0x01000000 (bit 24) — OC_SCAN_ALLOW_DEVICE_PCI, allow scanning devices directly connected to PCI bus (e.g. VIRTIO).\n\nNote: Given the above description, 0xF0103 value is expected to allow scanning of SATA, SAS, SCSI, and NVMe devices with APFS file system, and prevent scanning of any devices with HFS or FAT32 file systems in addition to not scanning APFS file systems on USB, CD, USB, and FireWire drives. The combination reads as:\n• OC_SCAN_FILE_SYSTEM_LOCK • OC_SCAN_DEVICE_LOCK\n• OC_SCAN_ALLOW_FS_APFS\n• OC_SCAN_ALLOW_DEVICE_SATA\n• OC_SCAN_ALLOW_DEVICE_SASEX\n• OC_SCAN_ALLOW_DEVICE_SCSI • OC_SCAN_ALLOW_DEVICE_NVME";

/* Class = "NSButtonCell"; title = "OC_SCAN_FILE_SYSTEM_LOCK"; ObjectID = "Wnm-4q-QJ3"; */
"Wnm-4q-QJ3.title" = "OC_SCAN_FILE_SYSTEM_LOCK";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_NTFS"; ObjectID = "WsC-yj-V3g"; */
"WsC-yj-V3g.title" = "OC_SCAN_ALLOW_FS_NTFS";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_SCSI"; ObjectID = "X1h-DD-gjM"; */
"X1h-DD-gjM.title" = "OC_SCAN_ALLOW_DEVICE_SCSI";

/* Class = "NSTableColumn"; headerCell.title = "Name"; ObjectID = "XRf-Yz-PVv"; */
"XRf-Yz-PVv.headerCell.title" = "Name";

/* Class = "NSTableColumn"; headerCell.title = "Path*"; ObjectID = "XSQ-pS-WUn"; */
"XSQ-pS-WUn.headerCell.title" = "Path*";

/* Class = "NSButtonCell"; title = "Show Picker"; ObjectID = "YKi-Mp-w6e"; */
"YKi-Mp-w6e.title" = "Show Picker";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_NVME"; ObjectID = "YQh-9A-q5Q"; */
"YQh-9A-q5Q.title" = "OC_SCAN_ALLOW_DEVICE_NVME";

/* Class = "NSTabViewItem"; label = "Debug"; ObjectID = "Yod-ne-FH8"; */
"Yod-ne-FH8.label" = "Debug";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Show simple boot picker to allow boot entry selection."; ObjectID = "Yyf-Yd-yrP"; */
"Yyf-Yd-yrP.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Show simple boot picker to allow boot entry selection.";

/* Class = "NSButtonCell"; title = "Enable basic console (onscreen) logging"; ObjectID = "ZZP-5O-C0h"; */
"ZZP-5O-C0h.title" = "Enable basic console (onscreen) logging";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 32 bit\nDefault value: 0\nDescription: Timeout in seconds in boot picker before automatic booting of the default boot entry. Use 0 to disable timer."; ObjectID = "Zxi-ww-dWk"; */
"Zxi-ww-dWk.ibShadowedToolTip" = "Type: plist integer, 32 bit\nDefault value: 0\nDescription: Timeout in seconds in boot picker before automatic booting of the default boot entry. Use 0 to disable timer.";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_SATA"; ObjectID = "aQY-Kx-ZCy"; */
"aQY-Kx-ZCy.title" = "OC_SCAN_ALLOW_DEVICE_SATA";

/* Class = "NSTextFieldCell"; title = "Scan Policy"; ObjectID = "aUx-rK-UTX"; */
"aUx-rK-UTX.title" = "Scan Policy";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "b27-wQ-s5W"; */
"b27-wQ-s5W.title" = "Select All";

/* Class = "NSButtonCell"; title = "PickerAudioAssist"; ObjectID = "cN2-ao-nCB"; */
"cN2-ao-nCB.title" = "PickerAudioAssist";

/* Class = "NSTextFieldCell"; title = "PasswordHash"; ObjectID = "cz1-6R-TEf"; */
"cz1-6R-TEf.title" = "PasswordHash";

/* Class = "NSTextFieldCell"; title = "Display Level"; ObjectID = "dam-Nc-xFX"; */
"dam-Nc-xFX.title" = "Display Level";

/* Class = "NSTableColumn"; headerCell.title = "TextMode"; ObjectID = "deu-Ec-YkZ"; */
"deu-Ec-YkZ.headerCell.title" = "TextMode";

/* Class = "NSButtonCell"; title = "Provides predefined label images for boot entries without custom entries"; ObjectID = "dl8-kF-ipf"; */
"dl8-kF-ipf.title" = "Provides predefined label images for boot entries without custom entries";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Produce system report on ESP folder.\nThis option will create a SysReport directory on ESP partition unless it is already present. The directory will contain ACPI, SMBIOS, and audio codec dumps. Audio codec dumps require an audio backend driver to be loaded.\n\nNote: For security reasons SysReport option is not available in RELEASE builds. Use a DEBUG build if this option is needed."; ObjectID = "eFH-QH-phT"; */
"eFH-QH-phT.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Produce system report on ESP folder.\nThis option will create a SysReport directory on ESP partition unless it is already present. The directory will contain ACPI, SMBIOS, and audio codec dumps. Audio codec dumps require an audio backend driver to be loaded.\n\nNote: For security reasons SysReport option is not available in RELEASE builds. Use a DEBUG build if this option is needed.";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_USB"; ObjectID = "eFc-bE-Fl5"; */
"eFc-bE-Fl5.title" = "OC_SCAN_ALLOW_DEVICE_USB";

/* Class = "NSTableView"; ibShadowedToolTip = "1. Arguments\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. Whether this value is used is implementation defined.\n3. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This tool will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty string\nDescription: Human readable tool name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty string\nDescription: File path to select UEFI tool relative to OC/Tools directory.\n7. RealPath\nType: plist boolean\nFailsafe: false\nDescription: Pass full path to the tool when launching.\n\nPassing tool directory may be unsafe for tool accidentally trying to access files without checking their integrity and thus should generally be disabled. Reason to enable this property may include cases where tools cannot work without external files or may need them for better function (e.g. memtest86 for logging and configuration or Shell for automatic script execution).\n\nNote: This property is only valid for Tools. For Entries this property cannot be specified and is always true.\n\n8. TextMode\nType: plist boolean\nFailsafe: false\nDescription: Run the entry in text mode instead of graphics mode.\n\nThis setting may be benefitial to some older tools that require text output. By default all the tools are launched in graphics mode. Read more about text modes in Output Properties section below."; ObjectID = "eH6-nm-MdQ"; */
"eH6-nm-MdQ.ibShadowedToolTip" = "1. Arguments\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used as boot arguments (load options) of the specified entry.\n2. Comment\nType: plist string\nFailsafe: Empty string\nDescription: Arbitrary ASCII string used to provide human readable reference for the entry. Whether this value is used is implementation defined.\n3. Auxiliary\nType: plist boolean\nFailsafe: false\nDescription: This entry will not be listed by default when HideAuxiliary is set to true.\n4. Enabled\nType: plist boolean\nFailsafe: false\nDescription: This tool will not be listed unless set to true.\n5. Name\nType: plist string\nFailsafe: Empty string\nDescription: Human readable tool name displayed in boot picker.\n6. Path\nType: plist string\nFailsafe: Empty string\nDescription: File path to select UEFI tool relative to OC/Tools directory.\n7. RealPath\nType: plist boolean\nFailsafe: false\nDescription: Pass full path to the tool when launching.\n\nPassing tool directory may be unsafe for tool accidentally trying to access files without checking their integrity and thus should generally be disabled. Reason to enable this property may include cases where tools cannot work without external files or may need them for better function (e.g. memtest86 for logging and configuration or Shell for automatic script execution).\n\nNote: This property is only valid for Tools. For Entries this property cannot be specified and is always true.\n\n8. TextMode\nType: plist boolean\nFailsafe: false\nDescription: Run the entry in text mode instead of graphics mode.\n\nThis setting may be benefitial to some older tools that require text output. By default all the tools are launched in graphics mode. Read more about text modes in Output Properties section below.";

/* Class = "NSTextFieldCell"; title = "Picker Attributes"; ObjectID = "eaZ-uU-2Tt"; */
"eaZ-uU-2Tt.title" = "Picker Attributes";

/* Class = "NSTextFieldCell"; title = "Vault"; ObjectID = "fN9-q5-dg3"; */
"fN9-q5-dg3.title" = "Vault";

/* Class = "NSTextFieldCell"; title = "DmgLoading"; ObjectID = "fVY-aJ-OPc"; */
"fVY-aJ-OPc.title" = "DmgLoading";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable boot.efi debug log saving to OpenCore log.\n\nNote: This option only applies to 10.15.4 and newer."; ObjectID = "fcn-ha-taM"; */
"fcn-ha-taM.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Enable boot.efi debug log saving to OpenCore log.\n\nNote: This option only applies to 10.15.4 and newer.";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Perform serial port initialisation.\nThis option will perform serial port initialisation within OpenCore prior to enabling (any) debug logging. Serial port configuration is defined via PCDs at compile time in gEfiMdeModulePkgTokenSpaceGuid GUID. Default values as found in MdeModulePkg.dec are as follows:\n• PcdSerialBaudRate — Baud rate: 115200.\n• PcdSerialLineControl — Line control: no parity, 8 data bits, 1 stop bit.\n\nSee more details in Debugging section."; ObjectID = "fmg-zD-rrJ"; */
"fmg-zD-rrJ.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Perform serial port initialisation.\nThis option will perform serial port initialisation within OpenCore prior to enabling (any) debug logging. Serial port configuration is defined via PCDs at compile time in gEfiMdeModulePkgTokenSpaceGuid GUID. Default values as found in MdeModulePkg.dec are as follows:\n• PcdSerialBaudRate — Baud rate: 115200.\n• PcdSerialLineControl — Line control: no parity, 8 data bits, 1 stop bit.\n\nSee more details in Debugging section.";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nFailsafe: 0\nDescription: Sets specific attributes for picker.\nBuiltin picker supports colour arguments as a sum of foreground and background colours according to UEFI specification. The value of black background and black foreground (0) is reserved. List of colour names:\n• 0x00 — EFI_BLACK\n• 0x01 — EFI_BLUE\n• 0x02 — EFI_GREEN\n• 0x03 — EFI_CYAN\n• 0x04 — EFI_RED\n• 0x05 — EFI_MAGENTA\n• 0x06 — EFI_BROWN\n• 0x07 — EFI_LIGHTGRAY\n• 0x08 — EFI_DARKGRAY\n• 0x09 — EFI_LIGHTBLUE\n• 0x0A — EFI_LIGHTGREEN\n• 0x0B — EFI_LIGHTCYAN\n• 0x0C — EFI_LIGHTRED\n• 0x0D — EFI_LIGHTMAGENTA \n• 0x0E — EFI_YELLOW\n• 0x0F — EFI_WHITE\n• 0x00 — EFI_BACKGROUND_BLACK\n• 0x10 — EFI_BACKGROUND_BLUE\n• 0x20 — EFI_BACKGROUND_GREEN\n• 0x30 — EFI_BACKGROUND_CYAN\n• 0x40 — EFI_BACKGROUND_RED\n• 0x50 — EFI_BACKGROUND_MAGENTA\n• 0x60 — EFI_BACKGROUND_BROWN\n• 0x70 — EFI_BACKGROUND_LIGHTGRAY\nNote: This option may not work well with System text renderer. Setting a background different from black could help testing proper GOP functioning."; ObjectID = "gD0-Iz-n35"; */
"gD0-Iz-n35.ibShadowedToolTip" = "Type: plist integer\nFailsafe: 0\nDescription: Sets specific attributes for picker.\nBuiltin picker supports colour arguments as a sum of foreground and background colours according to UEFI specification. The value of black background and black foreground (0) is reserved. List of colour names:\n• 0x00 — EFI_BLACK\n• 0x01 — EFI_BLUE\n• 0x02 — EFI_GREEN\n• 0x03 — EFI_CYAN\n• 0x04 — EFI_RED\n• 0x05 — EFI_MAGENTA\n• 0x06 — EFI_BROWN\n• 0x07 — EFI_LIGHTGRAY\n• 0x08 — EFI_DARKGRAY\n• 0x09 — EFI_LIGHTBLUE\n• 0x0A — EFI_LIGHTGREEN\n• 0x0B — EFI_LIGHTCYAN\n• 0x0C — EFI_LIGHTRED\n• 0x0D — EFI_LIGHTMAGENTA \n• 0x0E — EFI_YELLOW\n• 0x0F — EFI_WHITE\n• 0x00 — EFI_BACKGROUND_BLACK\n• 0x10 — EFI_BACKGROUND_BLUE\n• 0x20 — EFI_BACKGROUND_GREEN\n• 0x30 — EFI_BACKGROUND_CYAN\n• 0x40 — EFI_BACKGROUND_RED\n• 0x50 — EFI_BACKGROUND_MAGENTA\n• 0x60 — EFI_BACKGROUND_BROWN\n• 0x70 — EFI_BACKGROUND_LIGHTGRAY\nNote: This option may not work well with System text renderer. Setting a background different from black could help testing proper GOP functioning.";

/* Class = "NSTextFieldCell"; title = "Target"; ObjectID = "hAm-Ha-Meb"; */
"hAm-Ha-Meb.title" = "Target";

/* Class = "NSButtonCell"; title = "SerialInit"; ObjectID = "hRO-hk-wy8"; */
"hRO-hk-wy8.title" = "SerialInit";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nFailsafe: 0\nDescription: Sets specific attributes for picker.\n\nDifferent pickers may be configured through the attribute mask containing OpenCore-reserved (BIT0~BIT15) and OEM-specific (BIT16~BIT31) values.\nCurrent OpenCore values include:\n• 0x0001 — OC_ATTR_USE_VOLUME_ICON, provides custom icons for boot entries:\n\tFor Tools OpenCore will try to load a custom icon and fallback to the default icon:\n\t\t– ResetNVRAM — Resources\\Image\\ResetNVRAM.icns — ResetNVRAM.icns from icons directory.\n\t\t– Tools\\<TOOL_RELATIVE_PATH>.icns — icon near the tool file with appended .icns extension.\n\t\n\tFor custom boot Entries OpenCore will try to load a custom icon and fallback to the volume icon or the default icon:\n\t\t– <ENTRY_PATH>.icns — icon near the entry file with appended .icns extension.\n\t\n\tFor all other entries OpenCore will try to load a volume icon by searching as follows, and will fallback to the default icon otherwise:\n\t\t– .VolumeIcon.icnsfileatPrebootvolumeinper-volumedirectory(/System/Volumes/Preboot/{GUID}/ when mounted at default location within macOS) for APFS (if present).\n\t\t– .VolumeIcon.icns file at Preboot root (/System/Volumes/Preboot/ when mounted at default location within macOS) for APFS (otherwise).\n\t\t– .VolumeIcon.icns file at volume root for other filesystems.\n\nNote 1: Apple’s boot picker partially supports placing a volume icon file at the operating system’s Data volume root (/System/Volumes/Data/ when mounted at default location within macOS). This approach is broken: that file is not accessible either by OpenCanopy or by Apple’s own boot picker when FileVault 2 is enabled, which should be most people’s default choice. Therefore OpenCanopy does not try to support it. You may place a volume icon file at Preboot root for compatibility with both the Apple and OpenCanopy boot pickers, or use the Preboot per-volume location as above with OpenCanopy as a preferred alternative to Apple’s existing approach.\n\nNote 2: Be aware that using a volume icon on any drive overrides the normal boot picker behaviour for that drive of selecting the appropriate icon depending on whether the drive is internal or external.\n\n• 0x0002 — OC_ATTR_USE_DISK_LABEL_FILE, provides custom rendered titles for boot entries:\n\t– .disk_label (.disk_label_2x) file near bootloader for all filesystems.\n\t– <TOOL_NAME>.lbl (<TOOL_NAME>.l2x) file near tool for Tools.\n\nPrerendered labels can be generated via disklabel utility or bless command. When disabled or missing text labels (.contentDetails or .disk_label.contentDetails) are to be rendered instead.\n• 0x0004 — OC_ATTR_USE_GENERIC_LABEL_IMAGE, provides predefined label images for boot entries without\ncustom entries. May give less detail for the actual boot entry.\n• 0x0008 — OC_ATTR_HIDE_THEMED_ICONS, prefers builtin icons for certain icon categories to match the theme\nstyle. For example, this could force displaying the builtin Time Machine icon. Requires OC_ATTR_USE_VOLUME_ICON.\n• 0x0010 — OC_ATTR_USE_POINTER_CONTROL, enable pointer control in the picker when available. For example,\nthis could make use of mouse or trackpad to control UI elements."; ObjectID = "hdQ-rL-KAo"; */
"hdQ-rL-KAo.ibShadowedToolTip" = "Type: plist integer\nFailsafe: 0\nDescription: Sets specific attributes for picker.\n\nDifferent pickers may be configured through the attribute mask containing OpenCore-reserved (BIT0~BIT15) and OEM-specific (BIT16~BIT31) values.\nCurrent OpenCore values include:\n• 0x0001 — OC_ATTR_USE_VOLUME_ICON, provides custom icons for boot entries:\n\tFor Tools OpenCore will try to load a custom icon and fallback to the default icon:\n\t\t– ResetNVRAM — Resources\\Image\\ResetNVRAM.icns — ResetNVRAM.icns from icons directory.\n\t\t– Tools\\<TOOL_RELATIVE_PATH>.icns — icon near the tool file with appended .icns extension.\n\t\n\tFor custom boot Entries OpenCore will try to load a custom icon and fallback to the volume icon or the default icon:\n\t\t– <ENTRY_PATH>.icns — icon near the entry file with appended .icns extension.\n\t\n\tFor all other entries OpenCore will try to load a volume icon by searching as follows, and will fallback to the default icon otherwise:\n\t\t– .VolumeIcon.icnsfileatPrebootvolumeinper-volumedirectory(/System/Volumes/Preboot/{GUID}/ when mounted at default location within macOS) for APFS (if present).\n\t\t– .VolumeIcon.icns file at Preboot root (/System/Volumes/Preboot/ when mounted at default location within macOS) for APFS (otherwise).\n\t\t– .VolumeIcon.icns file at volume root for other filesystems.\n\nNote 1: Apple’s boot picker partially supports placing a volume icon file at the operating system’s Data volume root (/System/Volumes/Data/ when mounted at default location within macOS). This approach is broken: that file is not accessible either by OpenCanopy or by Apple’s own boot picker when FileVault 2 is enabled, which should be most people’s default choice. Therefore OpenCanopy does not try to support it. You may place a volume icon file at Preboot root for compatibility with both the Apple and OpenCanopy boot pickers, or use the Preboot per-volume location as above with OpenCanopy as a preferred alternative to Apple’s existing approach.\n\nNote 2: Be aware that using a volume icon on any drive overrides the normal boot picker behaviour for that drive of selecting the appropriate icon depending on whether the drive is internal or external.\n\n• 0x0002 — OC_ATTR_USE_DISK_LABEL_FILE, provides custom rendered titles for boot entries:\n\t– .disk_label (.disk_label_2x) file near bootloader for all filesystems.\n\t– <TOOL_NAME>.lbl (<TOOL_NAME>.l2x) file near tool for Tools.\n\nPrerendered labels can be generated via disklabel utility or bless command. When disabled or missing text labels (.contentDetails or .disk_label.contentDetails) are to be rendered instead.\n• 0x0004 — OC_ATTR_USE_GENERIC_LABEL_IMAGE, provides predefined label images for boot entries without\ncustom entries. May give less detail for the actual boot entry.\n• 0x0008 — OC_ATTR_HIDE_THEMED_ICONS, prefers builtin icons for certain icon categories to match the theme\nstyle. For example, this could force displaying the builtin Time Machine icon. Requires OC_ATTR_USE_VOLUME_ICON.\n• 0x0010 — OC_ATTR_USE_POINTER_CONTROL, enable pointer control in the picker when available. For example,\nthis could make use of mouse or trackpad to control UI elements.";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_ATAPI"; ObjectID = "i2m-65-2vq"; */
"i2m-65-2vq.title" = "OC_SCAN_ALLOW_DEVICE_ATAPI";

/* Class = "NSTextFieldCell"; title = "LauncherOption"; ObjectID = "i5B-oK-z1D"; */
"i5B-oK-z1D.title" = "LauncherOption";

/* Class = "NSButtonCell"; title = "Download/Update tools"; ObjectID = "i6P-Lb-eX2"; */
"i6P-Lb-eX2.title" = "Download/Update tools";

/* Class = "NSTableColumn"; headerCell.title = "Path*"; ObjectID = "jPS-Bu-Ar4"; */
"jPS-Bu-Ar4.headerCell.title" = "Path*";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string \nFailsafe: Default\nDescription: Apple Secure Boot hardware model.\n\nSets Apple Secure Boot hardware model and policy. Specifying this value defines which operating systems will be bootable. Operating systems shipped before the specified model was released will not boot. Valid values:\n\n• Default — Recent available model, currently set to j137.\n• Disabled — No model, Secure Boot will be disabled.\n• j137 — iMacPro1,1 (December 2017) minimum macOS 10.13.2 (17C2111)\n• j680 — MacBookPro15,1 (July 2018) minimum macOS 10.13.6 (17G2112)\n• j132 — MacBookPro15,2 (July 2018) minimum macOS 10.13.6 (17G2112)\n• j174 — Macmini8,1 (October 2018) minimum macOS 10.14 (18A2063)\n• j140k — MacBookAir8,1 (October 2018) minimum macOS 10.14.1 (18B2084)\n• j780 — MacBookPro15,3 (May 2019) minimum macOS 10.14.5 (18F132)\n• j213 — MacBookPro15,4 (July 2019) minimum macOS 10.14.5 (18F2058)\n• j140a — MacBookAir8,2 (July 2019) minimum macOS 10.14.5 (18F2058)\n• j152f — MacBookPro16,1 (November 2019) minimum macOS 10.15.1 (19B2093)\n• j160 — MacPro7,1 (December 2019) minimum macOS 10.15.1 (19B88)\n• j230k — MacBookAir9,1 (March 2020) minimum macOS 10.15.3 (19D2064)\n• j214k — MacBookPro16,2 (May 2020) minimum macOS 10.15.4 (19E2269)\n• j223 — MacBookPro16,3 (May 2020) minimum macOS 10.15.4 (19E2265)\n• j215 — MacBookPro16,4 (June 2020) minimum macOS 10.15.5 (19F96)\n• j185 — iMac20,1 (August 2020) minimum macOS 10.15.6 (19G2005)\n• j185f — iMac20,2 (August 2020) minimum macOS 10.15.6 (19G2005)\n• x86legacy — Macs and VMs without T2 chip minimum macOS 11.0\n\nPlatformInfo and SecureBootModel are independent, allowing to enabling Apple Secure Boot with any SMBIOS.\nSetting SecureBootModel to any valid value but Disabled is equivalent to Medium Security of Apple Secure Boot. The ApECID value must also be specified to achieve Full Security.\n\nEnabling Apple Secure Boot is more demanding to incorrect configurations, buggy macOS installations, and unsupported setups. Things to consider:\n(a) As with T2 Macs, unsigned kernel drivers and several signed kernel drivers, including NVIDIA Web Drivers, cannot be installed.\n(b) The list of cached drivers may be different, resulting in the need to change the list of Added or Forced kernel drivers. For example, IO80211Family cannot be injected in this case.\n(c) System volume alterations on operating systems with sealing, such as macOS 11, may result in the operating system being unbootable. Do not try to disable system volume encryption unless Apple Secure Boot is disabled.\n(d) If the platform requires certain settings, but they were not enabled, because the obvious issues did not trigger before, boot failure might occur. Be extra careful with IgnoreInvalidFlexRatio or HashServices.\n(e) Operating systems released before Apple Secure Boot landed (e.g. macOS 10.12 or earlier) will still boot until UEFI Secure Boot is enabled. This is so, because from Apple Secure Boot point they are treated as incompatible and are assumed to be handled by the firmware as Microsoft Windows is.\n(f) On older CPUs (e.g. before Sandy Bridge) enabling Apple Secure Boot might cause slightly slower loading section.\n(g) Since Default value will increase with time to support the latest major release operating system, it is not recommended to use ApECID and Default value together.\n\nSometimes the already installed operating system may have outdated Apple Secure Boot manifests on the Preboot partition causing boot failure. If there is “OCB: Apple Secure Boot prohibits this boot entry, enforcing!” message, it is likely the case. When this happens you can either reinstall the operating system or copy the manifests (files with .im4m extension, like boot.efi.j137.im4m) from /usr/standalone/i386 to /Volumes/Preboot/<UUID>/System/Library/CoreServices. Here <UUID> is your system volume identifier. For more details on how to configure Apple Secure Boot with UEFI Secure Boot refer to UEFI Secure Boot section."; ObjectID = "l6D-xS-M37"; */
"l6D-xS-M37.ibShadowedToolTip" = "Type: plist string \nFailsafe: Default\nDescription: Apple Secure Boot hardware model.\n\nSets Apple Secure Boot hardware model and policy. Specifying this value defines which operating systems will be bootable. Operating systems shipped before the specified model was released will not boot. Valid values:\n\n• Default — Recent available model, currently set to j137.\n• Disabled — No model, Secure Boot will be disabled.\n• j137 — iMacPro1,1 (December 2017) minimum macOS 10.13.2 (17C2111)\n• j680 — MacBookPro15,1 (July 2018) minimum macOS 10.13.6 (17G2112)\n• j132 — MacBookPro15,2 (July 2018) minimum macOS 10.13.6 (17G2112)\n• j174 — Macmini8,1 (October 2018) minimum macOS 10.14 (18A2063)\n• j140k — MacBookAir8,1 (October 2018) minimum macOS 10.14.1 (18B2084)\n• j780 — MacBookPro15,3 (May 2019) minimum macOS 10.14.5 (18F132)\n• j213 — MacBookPro15,4 (July 2019) minimum macOS 10.14.5 (18F2058)\n• j140a — MacBookAir8,2 (July 2019) minimum macOS 10.14.5 (18F2058)\n• j152f — MacBookPro16,1 (November 2019) minimum macOS 10.15.1 (19B2093)\n• j160 — MacPro7,1 (December 2019) minimum macOS 10.15.1 (19B88)\n• j230k — MacBookAir9,1 (March 2020) minimum macOS 10.15.3 (19D2064)\n• j214k — MacBookPro16,2 (May 2020) minimum macOS 10.15.4 (19E2269)\n• j223 — MacBookPro16,3 (May 2020) minimum macOS 10.15.4 (19E2265)\n• j215 — MacBookPro16,4 (June 2020) minimum macOS 10.15.5 (19F96)\n• j185 — iMac20,1 (August 2020) minimum macOS 10.15.6 (19G2005)\n• j185f — iMac20,2 (August 2020) minimum macOS 10.15.6 (19G2005)\n• x86legacy — Macs and VMs without T2 chip minimum macOS 11.0\n\nPlatformInfo and SecureBootModel are independent, allowing to enabling Apple Secure Boot with any SMBIOS.\nSetting SecureBootModel to any valid value but Disabled is equivalent to Medium Security of Apple Secure Boot. The ApECID value must also be specified to achieve Full Security.\n\nEnabling Apple Secure Boot is more demanding to incorrect configurations, buggy macOS installations, and unsupported setups. Things to consider:\n(a) As with T2 Macs, unsigned kernel drivers and several signed kernel drivers, including NVIDIA Web Drivers, cannot be installed.\n(b) The list of cached drivers may be different, resulting in the need to change the list of Added or Forced kernel drivers. For example, IO80211Family cannot be injected in this case.\n(c) System volume alterations on operating systems with sealing, such as macOS 11, may result in the operating system being unbootable. Do not try to disable system volume encryption unless Apple Secure Boot is disabled.\n(d) If the platform requires certain settings, but they were not enabled, because the obvious issues did not trigger before, boot failure might occur. Be extra careful with IgnoreInvalidFlexRatio or HashServices.\n(e) Operating systems released before Apple Secure Boot landed (e.g. macOS 10.12 or earlier) will still boot until UEFI Secure Boot is enabled. This is so, because from Apple Secure Boot point they are treated as incompatible and are assumed to be handled by the firmware as Microsoft Windows is.\n(f) On older CPUs (e.g. before Sandy Bridge) enabling Apple Secure Boot might cause slightly slower loading section.\n(g) Since Default value will increase with time to support the latest major release operating system, it is not recommended to use ApECID and Default value together.\n\nSometimes the already installed operating system may have outdated Apple Secure Boot manifests on the Preboot partition causing boot failure. If there is “OCB: Apple Secure Boot prohibits this boot entry, enforcing!” message, it is likely the case. When this happens you can either reinstall the operating system or copy the manifests (files with .im4m extension, like boot.efi.j137.im4m) from /usr/standalone/i386 to /Volumes/Preboot/<UUID>/System/Library/CoreServices. Here <UUID> is your system volume identifier. For more details on how to configure Apple Secure Boot with UEFI Secure Boot refer to UEFI Secure Boot section.";

/* Class = "NSButtonCell"; title = "EnablePassword"; ObjectID = "lLV-4d-gWP"; */
"lLV-4d-gWP.title" = "EnablePassword";

/* Class = "NSButtonCell"; title = "SkipCustomEntryCheck"; ObjectID = "mB0-8o-rL6"; */
"mB0-8o-rL6.title" = "SkipCustomEntryCheck";

/* Class = "NSButtonCell"; title = "DEBUG_VERBOSE in custom builds"; ObjectID = "mSr-7J-5Qp"; */
"mSr-7J-5Qp.title" = "DEBUG_VERBOSE in custom builds";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_APFS"; ObjectID = "mpH-5M-L70"; */
"mpH-5M-L70.title" = "OC_SCAN_ALLOW_FS_APFS";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_FIREWIRE"; ObjectID = "nmh-33-tbM"; */
"nmh-33-tbM.title" = "OC_SCAN_ALLOW_DEVICE_FIREWIRE";

/* Class = "NSTabViewItem"; label = "Tools"; ObjectID = "oFg-pn-DgG"; */
"oFg-pn-DgG.label" = "Tools";

/* Class = "NSButtonCell"; title = "Unselect All"; ObjectID = "oL1-jF-NNm"; */
"oL1-jF-NNm.title" = "Unselect All";

/* Class = "NSTextFieldCell"; title = "SecureBootModel"; ObjectID = "oef-cz-Kqc"; */
"oef-cz-Kqc.title" = "SecureBootModel";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer, 64 bit\nDefault value: 0\nDescription: EDK II debug level bitmask (sum) showed onscreen. Unless Target enables console (onscreen) printing, onscreen debug output will not be visible. The following levels are supported (discover more in DebugLib.h):\n• 0x00000002 — DEBUG_WARN in DEBUG, NOOPT, RELEASE. \n• 0x00000040 — DEBUG_INFO in DEBUG, NOOPT.\n• 0x00400000 — DEBUG_VERBOSE in custom builds.\n• 0x80000000 — DEBUG_ERROR in DEBUG, NOOPT, RELEASE."; ObjectID = "omf-bH-d4v"; */
"omf-bH-d4v.ibShadowedToolTip" = "Type: plist integer, 64 bit\nDefault value: 0\nDescription: EDK II debug level bitmask (sum) showed onscreen. Unless Target enables console (onscreen) printing, onscreen debug output will not be visible. The following levels are supported (discover more in DebugLib.h):\n• 0x00000002 — DEBUG_WARN in DEBUG, NOOPT, RELEASE. \n• 0x00000040 — DEBUG_INFO in DEBUG, NOOPT.\n• 0x00400000 — DEBUG_VERBOSE in custom builds.\n• 0x80000000 — DEBUG_ERROR in DEBUG, NOOPT, RELEASE.";

/* Class = "NSButtonCell"; title = "Select All"; ObjectID = "pIV-PK-mVi"; */
"pIV-PK-mVi.title" = "Select All";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Allow CMD+OPT+P+R handling and enable showing NVRAM Reset entry in boot picker.\n\nNote 1: It is known that some Lenovo laptops have a firmware bug, which makes them unbootable after performing NVRAM reset.\n\nNote2: Resetting NVRAM will also erase all the boot options otherwise not backed up with bless (e.g. Linux)."; ObjectID = "pTC-aG-QK1"; */
"pTC-aG-QK1.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Allow CMD+OPT+P+R handling and enable showing NVRAM Reset entry in boot picker.\n\nNote 1: It is known that some Lenovo laptops have a firmware bug, which makes them unbootable after performing NVRAM reset.\n\nNote2: Resetting NVRAM will also erase all the boot options otherwise not backed up with bless (e.g. Linux).";

/* Class = "NSTextField"; ibShadowedToolTip = "Type: plist data\nFailsafe: empty\nDescription: Password salt used when EnabledPassword is set."; ObjectID = "pYq-Ve-K08"; */
"pYq-Ve-K08.ibShadowedToolTip" = "Type: plist data\nFailsafe: empty\nDescription: Password salt used when EnabledPassword is set.";

/* Class = "NSTextFieldCell"; title = "Halt Level"; ObjectID = "pqr-DX-ZAM"; */
"pqr-DX-ZAM.title" = "Halt Level";

/* Class = "NSButtonCell"; title = "AllowSetDefault"; ObjectID = "qpq-Le-cti"; */
"qpq-Le-cti.title" = "AllowSetDefault";

/* Class = "NSButtonCell"; title = "Enable pointer control in the picker when available"; ObjectID = "r8W-nu-W4X"; */
"r8W-nu-W4X.title" = "Enable pointer control in the picker when available";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Allow CTRL+Enter and CTRL+Index handling to set the default boot option in boot picker."; ObjectID = "rQF-20-vFl"; */
"rQF-20-vFl.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Allow CTRL+Enter and CTRL+Index handling to set the default boot option in boot picker.";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_SDCARD"; ObjectID = "sti-pn-v4l"; */
"sti-pn-v4l.title" = "OC_SCAN_ALLOW_DEVICE_SDCARD";

/* Class = "NSButtonCell"; title = "AppleDebug"; ObjectID = "tBp-D4-d9x"; */
"tBp-D4-d9x.title" = "AppleDebug";

/* Class = "NSButtonCell"; title = "AuthRestart"; ObjectID = "tI2-d3-co4"; */
"tI2-d3-co4.title" = "AuthRestart";

/* Class = "NSButtonCell"; title = "Provides custom icons for boot entries"; ObjectID = "tLD-8o-zGU"; */
"tLD-8o-zGU.title" = "Provides custom icons for boot entries";

//* Class = "NSTextField"; ibShadowedToolTip = "Type: plist integer\nFailsafe: 0x6\nDescription: Sensitive data exposure bitmask (sum) to operating system.\n• 0x01 — Expose printable booter path as an UEFI variable.\n• 0x02 — Expose OpenCore version as an UEFI variable.\n• 0x04 — Expose OpenCore version in boot picker menu title.\n• 0x08 — Expose OEM information as a set of UEFI variables.\nExposed booter path points to OpenCore.efi or its booter depending on the load order. \n\nTo obtain booter path use the following command in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:boot-path\n\nTo use booter path for mounting booter volume use the following command in macOS:\nu=$(nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:boot-path | sed 's/.*GPT,\\([^,]*\\),.*/\\1/'); \\ if [ \"$u\" != \"\" ]; then sudo diskutil mount $u ; fi\n\nTo obtain OpenCore version use the following command in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:opencore-version\n\nTo obtain OEM information use the following commands in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-product # SMBIOS Type1 ProductName\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-vendor # SMBIOS Type2 Manufacturer\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-board # SMBIOS Type2 ProductName"; ObjectID = "tmf-fU-Pjy"; */
"tmf-fU-Pjy.ibShadowedToolTip" = "Type: plist integer\nFailsafe: 0x6\nDescription: Sensitive data exposure bitmask (sum) to operating system.\n• 0x01 — Expose printable booter path as an UEFI variable.\n• 0x02 — Expose OpenCore version as an UEFI variable.\n• 0x04 — Expose OpenCore version in boot picker menu title.\n• 0x08 — Expose OEM information as a set of UEFI variables.\nExposed booter path points to OpenCore.efi or its booter depending on the load order. \n\nTo obtain booter path use the following command in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:boot-path\n\nTo use booter path for mounting booter volume use the following command in macOS:\nu=$(nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:boot-path | sed 's/.*GPT,\\([^,]*\\),.*/\\1/'); \\ if [ \"$u\" != \"\" ]; then sudo diskutil mount $u ; fi\n\nTo obtain OpenCore version use the following command in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:opencore-version\n\nTo obtain OEM information use the following commands in macOS:\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-product # SMBIOS Type1 ProductName\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-vendor # SMBIOS Type2 Manufacturer\nnvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:oem-board # SMBIOS Type2 ProductName";

/* Class = "NSTableColumn"; headerCell.title = "Comment"; ObjectID = "uSO-ne-MBg"; */
"uSO-ne-MBg.headerCell.title" = "Comment";

/* Class = "NSButtonCell"; title = "Enable logging, otherwise all log is discarded"; ObjectID = "uWH-Lw-aeI"; */
"uWH-Lw-aeI.title" = "Enable logging, otherwise all log is discarded";

/* Class = "NSTabViewItem"; label = "Entries"; ObjectID = "uks-Bw-Ph4"; */
"uks-Bw-Ph4.label" = "Entries";

/* Class = "NSTabViewItem"; label = "BlessOverride"; ObjectID = "uyb-X6-nFt"; */
"uyb-X6-nFt.label" = "BlessOverride";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Enable modifier hotkey handling in boot picker.\nIn addition to action hotkeys, which are partially described in UsePicker section and are normally handled by Apple BDS, there exist modifier keys, which are handled by operating system bootloader, namely boot.efi. These keys allow to change operating system behaviour by providing different boot modes.\n\nOn types of firmware, it may be problematic to use modifier keys due to driver incompatibilities. To workaround this problem this option allows registering select hotkeys in a more permissive manner from within boot picker. Such extensions include the support of tapping on keys in addition to holding and pressing Shift along with other keys instead of just Shift alone, which is not detectable on many PS/2 keyboards. This list of known modifier hotkeys includes:\n• CMD+C+MINUS — disable board compatibility checking.\n• CMD+K — boot release kernel, similar to kcsuffix=release.\n• CMD+S — single user mode.\n• CMD+S+MINUS — disable KASLR slide, requires disabled SIP.\n• CMD+V — verbose mode.\n• Shift — safe mode."; ObjectID = "vvg-w7-KxC"; */
"vvg-w7-KxC.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Enable modifier hotkey handling in boot picker.\nIn addition to action hotkeys, which are partially described in UsePicker section and are normally handled by Apple BDS, there exist modifier keys, which are handled by operating system bootloader, namely boot.efi. These keys allow to change operating system behaviour by providing different boot modes.\n\nOn types of firmware, it may be problematic to use modifier keys due to driver incompatibilities. To workaround this problem this option allows registering select hotkeys in a more permissive manner from within boot picker. Such extensions include the support of tapping on keys in addition to holding and pressing Shift along with other keys instead of just Shift alone, which is not detectable on many PS/2 keyboards. This list of known modifier hotkeys includes:\n• CMD+C+MINUS — disable board compatibility checking.\n• CMD+K — boot release kernel, similar to kcsuffix=release.\n• CMD+S — single user mode.\n• CMD+S+MINUS — disable KASLR slide, requires disabled SIP.\n• CMD+V — verbose mode.\n• Shift — safe mode.";

/* Class = "NSTableColumn"; headerCell.title = "Arguments"; ObjectID = "wFf-6v-O3P"; */
"wFf-6v-O3P.headerCell.title" = "Arguments";

/* Class = "NSPopUpButton"; ibShadowedToolTip = "Type: plist string\nFailsafe: None\nDescription: Hibernation detection mode. The following modes are supported:\n• None — Avoid hibernation (Recommended).\n• Auto — Use RTC and NVRAM detection.\n• RTC — Use RTC detection.\n• NVRAM — Use NVRAM detection."; ObjectID = "wPi-6s-R0s"; */
"wPi-6s-R0s.ibShadowedToolTip" = "Type: plist string\nFailsafe: None\nDescription: Hibernation detection mode. The following modes are supported:\n• None — Avoid hibernation (Recommended).\n• Auto — Use RTC and NVRAM detection.\n• RTC — Use RTC detection.\n• NVRAM — Use NVRAM detection.";

/* Class = "NSTextFieldCell"; title = "TakeoffDelay"; ObjectID = "yDl-hK-Eml"; */
"yDl-hK-Eml.title" = "TakeoffDelay";

/* Class = "NSButtonCell"; title = "OC_SCAN_DEVICE_LOCK"; ObjectID = "yNo-gi-9zr"; */
"yNo-gi-9zr.title" = "OC_SCAN_DEVICE_LOCK";

/* Class = "NSTableColumn"; headerCell.title = "Auxiliary"; ObjectID = "yTI-cV-qsU"; */
"yTI-cV-qsU.headerCell.title" = "Auxiliary";

/* Class = "NSButtonCell"; title = "ApplePanic"; ObjectID = "yaU-Lw-vco"; */
"yaU-Lw-vco.title" = "ApplePanic";

/* Class = "NSTextFieldCell"; title = "LauncherPath"; ObjectID = "ykx-r5-I09"; */
"ykx-r5-I09.title" = "LauncherPath";

/* Class = "NSButtonCell"; title = "Expose printable booter path as an UEFI variable."; ObjectID = "z6D-gM-UDa"; */
"z6D-gM-UDa.title" = "Expose printable booter path as an UEFI variable.";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_FS_HFS"; ObjectID = "zCH-tB-ca6"; */
"zCH-tB-ca6.title" = "OC_SCAN_ALLOW_FS_HFS";

/* Class = "NSButton"; ibShadowedToolTip = "Type: plist boolean\nFailsafe: false\nDescription: Hides auxiliary entries from picker menu by default. \nAn entry is considered auxiliary when at least one of the following applies:\n• Entry is macOS recovery.\n• Entry is macOS Time Machine.\n• Entry is explicitly marked as Auxiliary.\n• Entry is system (e.g. Reset NVRAM).\n\nTo see all entries picker menu needs to be reloaded in extended mode by pressing Spacebar key. Hiding auxiliary \nentries may increase boot performance for multidisk systems."; ObjectID = "zgV-bT-EgH"; */
"zgV-bT-EgH.ibShadowedToolTip" = "Type: plist boolean\nFailsafe: false\nDescription: Hides auxiliary entries from picker menu by default. \nAn entry is considered auxiliary when at least one of the following applies:\n• Entry is macOS recovery.\n• Entry is macOS Time Machine.\n• Entry is explicitly marked as Auxiliary.\n• Entry is system (e.g. Reset NVRAM).\n\nTo see all entries picker menu needs to be reloaded in extended mode by pressing Spacebar key. Hiding auxiliary \nentries may increase boot performance for multidisk systems.";

/* Class = "NSButtonCell"; title = "OC_SCAN_ALLOW_DEVICE_SASEX"; ObjectID = "zj4-Hs-Xjk"; */
"zj4-Hs-Xjk.title" = "OC_SCAN_ALLOW_DEVICE_SASEX";

/* Class = "NSButtonCell"; title = "DEBUG_ERROR in DEBUG, NOOPT, RELEASE"; ObjectID = "zlC-gM-dIj"; */
"zlC-gM-dIj.title" = "DEBUG_ERROR in DEBUG, NOOPT, RELEASE";