Kconfig 64.8 KB
Newer Older
L
Linus Torvalds 已提交
1 2 3
config ARM
	bool
	default y
4
	select HAVE_AOUT
5
	select HAVE_DMA_API_DEBUG
6
	select HAVE_IDE if PCI || ISA || PCMCIA
R
Russell King 已提交
7
	select HAVE_MEMBLOCK
8
	select RTC_LIB
9
	select SYS_SUPPORTS_APM_EMULATION
10
	select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
11
	select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
12
	select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
J
Jason Wessel 已提交
13
	select HAVE_ARCH_KGDB
14
	select HAVE_KPROBES if !XIP_KERNEL
15
	select HAVE_KRETPROBES if (HAVE_KPROBES)
16
	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
17 18
	select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
	select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
19
	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
20
	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
21
	select HAVE_GENERIC_DMA_COHERENT
22 23
	select HAVE_KERNEL_GZIP
	select HAVE_KERNEL_LZO
24
	select HAVE_KERNEL_LZMA
25
	select HAVE_KERNEL_XZ
26
	select HAVE_IRQ_WORK
27 28
	select HAVE_PERF_EVENTS
	select PERF_USE_VMALLOC
29
	select HAVE_REGS_AND_STACK_ACCESS_API
30
	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
31
	select HAVE_C_RECORDMCOUNT
32
	select HAVE_GENERIC_HARDIRQS
33
	select GENERIC_IRQ_SHOW
34
	select CPU_PM if (SUSPEND || CPU_IDLE)
35
	select GENERIC_PCI_IOMAP
36
	select HAVE_BPF_JIT if NET
L
Linus Torvalds 已提交
37 38
	help
	  The ARM series is a line of low-power-consumption RISC chip designs
39
	  licensed by ARM Ltd and targeted at embedded applications and
L
Linus Torvalds 已提交
40
	  handhelds such as the Compaq IPAQ.  ARM-based PCs are no longer
41
	  manufactured, but legacy ARM-based PC hardware remains popular in
L
Linus Torvalds 已提交
42 43 44
	  Europe.  There is an ARM Linux project with a web page at
	  <http://www.arm.linux.org.uk/>.

45 46 47
config ARM_HAS_SG_CHAIN
	bool

R
Russell King 已提交
48 49 50
config HAVE_PWM
	bool

51 52 53
config MIGHT_HAVE_PCI
	bool

54 55 56
config SYS_SUPPORTS_APM_EMULATION
	bool

D
David Brownell 已提交
57 58 59
config GENERIC_GPIO
	bool

60 61 62
config ARCH_USES_GETTIMEOFFSET
	bool
	default n
63

64 65 66
config GENERIC_CLOCKEVENTS
	bool

67 68 69
config GENERIC_CLOCKEVENTS_BROADCAST
	bool
	depends on GENERIC_CLOCKEVENTS
70
	default y if SMP
71

72 73 74 75
config KTIME_SCALAR
	bool
	default y

76 77 78 79
config HAVE_TCM
	bool
	select GENERIC_ALLOCATOR

80 81 82
config HAVE_PROC_CPU
	bool

A
Al Viro 已提交
83 84 85
config NO_IOPORT
	bool

L
Linus Torvalds 已提交
86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111
config EISA
	bool
	---help---
	  The Extended Industry Standard Architecture (EISA) bus was
	  developed as an open alternative to the IBM MicroChannel bus.

	  The EISA bus provided some of the features of the IBM MicroChannel
	  bus while maintaining backward compatibility with cards made for
	  the older ISA bus.  The EISA bus saw limited use between 1988 and
	  1995 when it was made obsolete by the PCI bus.

	  Say Y here if you are building a kernel for an EISA-based machine.

	  Otherwise, say N.

config SBUS
	bool

config MCA
	bool
	help
	  MicroChannel Architecture is found in some IBM PS/2 machines and
	  laptops.  It is a bus system similar to PCI or ISA. See
	  <file:Documentation/mca.txt> (and especially the web page given
	  there) before attempting to build an MCA bus kernel.

112 113 114 115
config STACKTRACE_SUPPORT
	bool
	default y

N
Nicolas Pitre 已提交
116 117 118 119 120
config HAVE_LATENCYTOP_SUPPORT
	bool
	depends on !SMP
	default y

121 122 123 124
config LOCKDEP_SUPPORT
	bool
	default y

R
Russell King 已提交
125 126 127 128
config TRACE_IRQFLAGS_SUPPORT
	bool
	default y

129 130 131 132 133 134 135 136
config HARDIRQS_SW_RESEND
	bool
	default y

config GENERIC_IRQ_PROBE
	bool
	default y

N
Nick Piggin 已提交
137 138 139 140 141
config GENERIC_LOCKBREAK
	bool
	default y
	depends on SMP && PREEMPT

L
Linus Torvalds 已提交
142 143 144 145 146 147 148
config RWSEM_GENERIC_SPINLOCK
	bool
	default y

config RWSEM_XCHGADD_ALGORITHM
	bool

149 150 151 152 153 154
config ARCH_HAS_ILOG2_U32
	bool

config ARCH_HAS_ILOG2_U64
	bool

155 156 157 158 159 160 161
config ARCH_HAS_CPUFREQ
	bool
	help
	  Internal node to signify that the ARCH has CPUFREQ support
	  and that the relevant menu configurations are displayed for
	  it.

162 163 164
config ARCH_HAS_CPU_IDLE_WAIT
       def_bool y

165 166 167 168
config GENERIC_HWEIGHT
	bool
	default y

L
Linus Torvalds 已提交
169 170 171 172
config GENERIC_CALIBRATE_DELAY
	bool
	default y

173 174 175
config ARCH_MAY_HAVE_PC_FDC
	bool

176 177 178
config ZONE_DMA
	bool

179 180 181
config NEED_DMA_MAP_STATE
       def_bool y

182 183 184
config ARCH_HAS_DMA_SET_COHERENT_MASK
	bool

L
Linus Torvalds 已提交
185 186 187 188 189 190
config GENERIC_ISA_DMA
	bool

config FIQ
	bool

191 192 193
config NEED_RET_TO_USER
	bool

194 195 196
config ARCH_MTD_XIP
	bool

197 198
config VECTORS_BASE
	hex
199
	default 0xffff0000 if MMU || CPU_HIGH_VECTOR
200 201 202 203 204
	default DRAM_BASE if REMAP_VECTORS_TO_RAM
	default 0x00000000
	help
	  The base address of exception vectors.

205
config ARM_PATCH_PHYS_VIRT
206 207
	bool "Patch physical to virtual translations at runtime" if EMBEDDED
	default y
N
Nicolas Pitre 已提交
208
	depends on !XIP_KERNEL && MMU
209 210
	depends on !ARCH_REALVIEW || !SPARSEMEM
	help
211 212 213
	  Patch phys-to-virt and virt-to-phys translation functions at
	  boot and module load time according to the position of the
	  kernel in system memory.
214

215
	  This can only be used with non-XIP MMU kernels where the base
216
	  of physical memory is at a 16MB boundary.
217

218 219 220
	  Only disable this option if you know that you do not require
	  this feature (eg, building a kernel for a single machine) and
	  you need to shrink the kernel to the minimal size.
221

222 223 224 225 226 227 228
config NEED_MACH_IO_H
	bool
	help
	  Select this when mach/io.h is required to provide special
	  definitions for this platform.  The need for mach/io.h should
	  be avoided when possible.

229
config NEED_MACH_MEMORY_H
230 231
	bool
	help
232 233 234
	  Select this when mach/memory.h is required to provide special
	  definitions for this platform.  The need for mach/memory.h should
	  be avoided when possible.
235

236
config PHYS_OFFSET
237
	hex "Physical address of main memory" if MMU
238
	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
239
	default DRAM_BASE if !MMU
240
	help
241 242
	  Please provide the physical address corresponding to the
	  location of main memory in your system.
243

244 245 246 247
config GENERIC_BUG
	def_bool y
	depends on BUG

L
Linus Torvalds 已提交
248 249
source "init/Kconfig"

250 251
source "kernel/Kconfig.freezer"

L
Linus Torvalds 已提交
252 253
menu "System Type"

254 255 256 257 258 259 260
config MMU
	bool "MMU-based Paged Memory Management Support"
	default y
	help
	  Select if you want MMU-based virtualised addressing space
	  support by paged memory management. If unsure, say 'Y'.

261 262 263 264
#
# The "ARM system type" choice list is ordered alphabetically by option
# text.  Please add new entries in the option alphabetic order.
#
L
Linus Torvalds 已提交
265 266
choice
	prompt "ARM system type"
267
	default ARCH_VERSATILE
L
Linus Torvalds 已提交
268

269 270 271
config ARCH_INTEGRATOR
	bool "ARM Ltd. Integrator family"
	select ARM_AMBA
272
	select ARCH_HAS_CPUFREQ
273
	select CLKDEV_LOOKUP
274
	select HAVE_MACH_CLKDEV
275
	select HAVE_TCM
276
	select ICST
277
	select GENERIC_CLOCKEVENTS
278
	select PLAT_VERSATILE
279
	select PLAT_VERSATILE_FPGA_IRQ
280
	select NEED_MACH_IO_H
281
	select NEED_MACH_MEMORY_H
282
	select SPARSE_IRQ
283 284 285 286 287 288
	help
	  Support for ARM's Integrator platform.

config ARCH_REALVIEW
	bool "ARM Ltd. RealView family"
	select ARM_AMBA
289
	select CLKDEV_LOOKUP
290
	select HAVE_MACH_CLKDEV
291
	select ICST
292
	select GENERIC_CLOCKEVENTS
293
	select ARCH_WANT_OPTIONAL_GPIOLIB
294
	select PLAT_VERSATILE
295
	select PLAT_VERSATILE_CLCD
296
	select ARM_TIMER_SP804
297
	select GPIO_PL061 if GPIOLIB
298
	select NEED_MACH_MEMORY_H
299 300 301 302 303 304 305
	help
	  This enables support for ARM Ltd RealView boards.

config ARCH_VERSATILE
	bool "ARM Ltd. Versatile family"
	select ARM_AMBA
	select ARM_VIC
306
	select CLKDEV_LOOKUP
307
	select HAVE_MACH_CLKDEV
308
	select ICST
309
	select GENERIC_CLOCKEVENTS
310
	select ARCH_WANT_OPTIONAL_GPIOLIB
311
	select PLAT_VERSATILE
312
	select PLAT_VERSATILE_CLCD
313
	select PLAT_VERSATILE_FPGA_IRQ
314
	select ARM_TIMER_SP804
315 316 317
	help
	  This enables support for ARM Ltd Versatile board.

318 319 320 321 322
config ARCH_VEXPRESS
	bool "ARM Ltd. Versatile Express family"
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select ARM_AMBA
	select ARM_TIMER_SP804
323
	select CLKDEV_LOOKUP
324
	select HAVE_MACH_CLKDEV
325 326
	select GENERIC_CLOCKEVENTS
	select HAVE_CLK
327
	select HAVE_PATA_PLATFORM
328
	select ICST
329
	select NO_IOPORT
330
	select PLAT_VERSATILE
331
	select PLAT_VERSATILE_CLCD
332 333 334
	help
	  This enables support for the ARM Ltd Versatile Express boards.

335 336
config ARCH_AT91
	bool "Atmel AT91"
337
	select ARCH_REQUIRE_GPIOLIB
D
David Brownell 已提交
338
	select HAVE_CLK
339
	select CLKDEV_LOOKUP
340
	select IRQ_DOMAIN
R
Rob Herring 已提交
341
	select NEED_MACH_IO_H if PCCARD
342
	help
343
	  This enables support for systems based on the Atmel AT91RM9200,
344
	  AT91SAM9 processors.
345

346 347 348 349 350
config ARCH_BCMRING
	bool "Broadcom BCMRING"
	depends on MMU
	select CPU_V6
	select ARM_AMBA
351
	select ARM_TIMER_SP804
352
	select CLKDEV_LOOKUP
353 354 355 356 357
	select GENERIC_CLOCKEVENTS
	select ARCH_WANT_OPTIONAL_GPIOLIB
	help
	  Support for Broadcom's BCMRing platform.

358 359 360 361 362 363
config ARCH_HIGHBANK
	bool "Calxeda Highbank-based"
	select ARCH_WANT_OPTIONAL_GPIOLIB
	select ARM_AMBA
	select ARM_GIC
	select ARM_TIMER_SP804
364
	select CACHE_L2X0
365 366 367 368
	select CLKDEV_LOOKUP
	select CPU_V7
	select GENERIC_CLOCKEVENTS
	select HAVE_ARM_SCU
369
	select HAVE_SMP
370
	select SPARSE_IRQ
371 372 373 374
	select USE_OF
	help
	  Support for the Calxeda Highbank SoC based boards.

L
Linus Torvalds 已提交
375
config ARCH_CLPS711X
376
	bool "Cirrus Logic CLPS711x/EP721x-based"
377
	select CPU_ARM720T
378
	select ARCH_USES_GETTIMEOFFSET
379
	select NEED_MACH_MEMORY_H
380 381
	help
	  Support for Cirrus Logic 711x/721x based boards.
L
Linus Torvalds 已提交
382

383 384
config ARCH_CNS3XXX
	bool "Cavium Networks CNS3XXX family"
I
Imre Kaloz 已提交
385
	select CPU_V6K
386 387
	select GENERIC_CLOCKEVENTS
	select ARM_GIC
388
	select MIGHT_HAVE_CACHE_L2X0
389
	select MIGHT_HAVE_PCI
390
	select PCI_DOMAINS if PCI
391 392 393
	help
	  Support for Cavium Networks CNS3XXX platform.

394 395 396 397
config ARCH_GEMINI
	bool "Cortina Systems Gemini"
	select CPU_FA526
	select ARCH_REQUIRE_GPIOLIB
398
	select ARCH_USES_GETTIMEOFFSET
399 400 401
	help
	  Support for the Cortina Systems Gemini family SoCs

A
Arnd Bergmann 已提交
402 403 404 405 406 407 408
config ARCH_PRIMA2
	bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform"
	select CPU_V7
	select NO_IOPORT
	select GENERIC_CLOCKEVENTS
	select CLKDEV_LOOKUP
	select GENERIC_IRQ_CHIP
409
	select MIGHT_HAVE_CACHE_L2X0
A
Arnd Bergmann 已提交
410 411 412 413 414
	select USE_OF
	select ZONE_DMA
	help
          Support for CSR SiRFSoC ARM Cortex A9 Platform

L
Linus Torvalds 已提交
415 416
config ARCH_EBSA110
	bool "EBSA-110"
417
	select CPU_SA110
418
	select ISA
419
	select NO_IOPORT
420
	select ARCH_USES_GETTIMEOFFSET
421
	select NEED_MACH_IO_H
422
	select NEED_MACH_MEMORY_H
L
Linus Torvalds 已提交
423 424
	help
	  This is an evaluation board for the StrongARM processor available
425
	  from Digital. It has limited hardware on-board, including an
L
Linus Torvalds 已提交
426 427 428
	  Ethernet interface, two PCMCIA sockets, two serial ports and a
	  parallel port.

429 430
config ARCH_EP93XX
	bool "EP93xx-based"
431
	select CPU_ARM920T
432 433
	select ARM_AMBA
	select ARM_VIC
434
	select CLKDEV_LOOKUP
M
Michael Buesch 已提交
435
	select ARCH_REQUIRE_GPIOLIB
436
	select ARCH_HAS_HOLES_MEMORYMODEL
437
	select ARCH_USES_GETTIMEOFFSET
438
	select NEED_MACH_MEMORY_H
439 440 441
	help
	  This enables support for the Cirrus EP93xx series of CPUs.

L
Linus Torvalds 已提交
442 443
config ARCH_FOOTBRIDGE
	bool "FootBridge"
444
	select CPU_SA110
L
Linus Torvalds 已提交
445
	select FOOTBRIDGE
446
	select GENERIC_CLOCKEVENTS
447
	select HAVE_IDE
448
	select NEED_MACH_IO_H
449
	select NEED_MACH_MEMORY_H
450 451 452
	help
	  Support for systems based on the DC21285 companion chip
	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
L
Linus Torvalds 已提交
453

454 455 456 457
config ARCH_MXC
	bool "Freescale MXC/iMX-based"
	select GENERIC_CLOCKEVENTS
	select ARCH_REQUIRE_GPIOLIB
458
	select CLKDEV_LOOKUP
459
	select CLKSRC_MMIO
460
	select GENERIC_IRQ_CHIP
461
	select MULTI_IRQ_HANDLER
462 463 464
	help
	  Support for Freescale MXC/iMX-based family of processors

465 466 467 468
config ARCH_MXS
	bool "Freescale MXS-based"
	select GENERIC_CLOCKEVENTS
	select ARCH_REQUIRE_GPIOLIB
469
	select CLKDEV_LOOKUP
470
	select CLKSRC_MMIO
471
	select HAVE_CLK_PREPARE
472 473 474
	help
	  Support for Freescale MXS-based family of processors

475 476
config ARCH_NETX
	bool "Hilscher NetX based"
477
	select CLKSRC_MMIO
478
	select CPU_ARM926T
479
	select ARM_VIC
480
	select GENERIC_CLOCKEVENTS
481
	help
482 483 484 485
	  This enables support for systems based on the Hilscher NetX Soc

config ARCH_H720X
	bool "Hynix HMS720x-based"
486
	select CPU_ARM720T
487
	select ISA_DMA_API
488
	select ARCH_USES_GETTIMEOFFSET
489 490 491
	help
	  This enables support for systems based on the Hynix HMS720x

492 493 494
config ARCH_IOP13XX
	bool "IOP13xx-based"
	depends on MMU
495
	select CPU_XSC3
496 497 498
	select PLAT_IOP
	select PCI
	select ARCH_SUPPORTS_MSI
499
	select VMSPLIT_1G
500
	select NEED_MACH_IO_H
501
	select NEED_MACH_MEMORY_H
502
	select NEED_RET_TO_USER
503 504 505
	help
	  Support for Intel's IOP13XX (XScale) family of processors.

506 507
config ARCH_IOP32X
	bool "IOP32x-based"
508
	depends on MMU
509
	select CPU_XSCALE
510
	select NEED_MACH_IO_H
511
	select NEED_RET_TO_USER
512
	select PLAT_IOP
513
	select PCI
514
	select ARCH_REQUIRE_GPIOLIB
515
	help
516 517 518 519 520 521
	  Support for Intel's 80219 and IOP32X (XScale) family of
	  processors.

config ARCH_IOP33X
	bool "IOP33x-based"
	depends on MMU
522
	select CPU_XSCALE
523
	select NEED_MACH_IO_H
524
	select NEED_RET_TO_USER
525
	select PLAT_IOP
526
	select PCI
527
	select ARCH_REQUIRE_GPIOLIB
528 529
	help
	  Support for Intel's IOP33X (XScale) family of processors.
L
Linus Torvalds 已提交
530

531 532
config ARCH_IXP23XX
 	bool "IXP23XX-based"
533
	depends on MMU
534
	select CPU_XSC3
535
 	select PCI
536
	select ARCH_USES_GETTIMEOFFSET
537
	select NEED_MACH_IO_H
538
	select NEED_MACH_MEMORY_H
539
	help
540
	  Support for Intel's IXP23xx (XScale) family of processors.
L
Linus Torvalds 已提交
541 542 543

config ARCH_IXP2000
	bool "IXP2400/2800-based"
544
	depends on MMU
545
	select CPU_XSCALE
546
	select PCI
547
	select ARCH_USES_GETTIMEOFFSET
548
	select NEED_MACH_IO_H
549
	select NEED_MACH_MEMORY_H
550 551
	help
	  Support for Intel's IXP2400/2800 (XScale) family of processors.
L
Linus Torvalds 已提交
552

553 554
config ARCH_IXP4XX
	bool "IXP4xx-based"
555
	depends on MMU
556
	select ARCH_HAS_DMA_SET_COHERENT_MASK
557
	select CLKSRC_MMIO
558
	select CPU_XSCALE
559
	select GENERIC_GPIO
560
	select GENERIC_CLOCKEVENTS
561
	select MIGHT_HAVE_PCI
562
	select NEED_MACH_IO_H
R
Russell King 已提交
563
	select DMABOUNCE if PCI
564
	help
565
	  Support for Intel's IXP4XX (XScale) family of processors.
566

567 568
config ARCH_DOVE
	bool "Marvell Dove"
569
	select CPU_V7
570 571 572
	select PCI
	select ARCH_REQUIRE_GPIOLIB
	select GENERIC_CLOCKEVENTS
573
	select NEED_MACH_IO_H
574 575 576 577
	select PLAT_ORION
	help
	  Support for the Marvell Dove SoC 88AP510

578 579
config ARCH_KIRKWOOD
	bool "Marvell Kirkwood"
580
	select CPU_FEROCEON
581
	select PCI
582
	select ARCH_REQUIRE_GPIOLIB
583
	select GENERIC_CLOCKEVENTS
584
	select NEED_MACH_IO_H
585 586 587 588 589
	select PLAT_ORION
	help
	  Support for the following Marvell Kirkwood series SoCs:
	  88F6180, 88F6192 and 88F6281.

590 591
config ARCH_LPC32XX
	bool "NXP LPC32XX"
592
	select CLKSRC_MMIO
593 594 595 596 597
	select CPU_ARM926T
	select ARCH_REQUIRE_GPIOLIB
	select HAVE_IDE
	select ARM_AMBA
	select USB_ARCH_HAS_OHCI
598
	select CLKDEV_LOOKUP
599 600 601 602
	select GENERIC_CLOCKEVENTS
	help
	  Support for the NXP LPC32XX family of processors

603 604
config ARCH_MV78XX0
	bool "Marvell MV78xx0"
605
	select CPU_FEROCEON
606
	select PCI
607
	select ARCH_REQUIRE_GPIOLIB
608
	select GENERIC_CLOCKEVENTS
609
	select NEED_MACH_IO_H
610 611 612 613 614
	select PLAT_ORION
	help
	  Support for the following Marvell MV78xx0 series SoCs:
	  MV781x0, MV782x0.

615
config ARCH_ORION5X
616 617
	bool "Marvell Orion"
	depends on MMU
618
	select CPU_FEROCEON
T
Tzachi Perelstein 已提交
619
	select PCI
620
	select ARCH_REQUIRE_GPIOLIB
621
	select GENERIC_CLOCKEVENTS
L
Lennert Buytenhek 已提交
622
	select PLAT_ORION
623
	help
624
	  Support for the following Marvell Orion 5x series SoCs:
625
	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
626
	  Orion-2 (5281), Orion-1-90 (6183).
627

628
config ARCH_MMP
629
	bool "Marvell PXA168/910/MMP2"
630 631
	depends on MMU
	select ARCH_REQUIRE_GPIOLIB
632
	select CLKDEV_LOOKUP
633
	select GENERIC_CLOCKEVENTS
634
	select GPIO_PXA
635 636
	select TICK_ONESHOT
	select PLAT_PXA
H
Haojian Zhuang 已提交
637
	select SPARSE_IRQ
L
Leo Yan 已提交
638
	select GENERIC_ALLOCATOR
639
	help
640
	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
641 642 643 644

config ARCH_KS8695
	bool "Micrel/Kendin KS8695"
	select CPU_ARM922T
645
	select ARCH_REQUIRE_GPIOLIB
646
	select ARCH_USES_GETTIMEOFFSET
647
	select NEED_MACH_MEMORY_H
648 649 650 651 652 653 654
	help
	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
	  System-on-Chip devices.

config ARCH_W90X900
	bool "Nuvoton W90X900 CPU"
	select CPU_ARM926T
655
	select ARCH_REQUIRE_GPIOLIB
656
	select CLKDEV_LOOKUP
657
	select CLKSRC_MMIO
658
	select GENERIC_CLOCKEVENTS
659
	help
660 661 662 663 664 665 666
	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
	  At present, the w90x900 has been renamed nuc900, regarding
	  the ARM series product line, you can login the following
	  link address to know more.

	  <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
		ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
667

668 669
config ARCH_TEGRA
	bool "NVIDIA Tegra"
R
Russell King 已提交
670
	select CLKDEV_LOOKUP
671
	select CLKSRC_MMIO
672 673 674
	select GENERIC_CLOCKEVENTS
	select GENERIC_GPIO
	select HAVE_CLK
675
	select HAVE_SMP
676
	select MIGHT_HAVE_CACHE_L2X0
677
	select NEED_MACH_IO_H if PCI
C
Colin Cross 已提交
678
	select ARCH_HAS_CPUFREQ
679 680 681 682
	help
	  This enables support for NVIDIA Tegra based systems (Tegra APX,
	  Tegra 6xx and Tegra 2 series).

683 684 685 686 687 688 689 690 691 692 693
config ARCH_PICOXCELL
	bool "Picochip picoXcell"
	select ARCH_REQUIRE_GPIOLIB
	select ARM_PATCH_PHYS_VIRT
	select ARM_VIC
	select CPU_V6K
	select DW_APB_TIMER
	select GENERIC_CLOCKEVENTS
	select GENERIC_GPIO
	select HAVE_TCM
	select NO_IOPORT
694
	select SPARSE_IRQ
695 696 697 698 699 700
	select USE_OF
	help
	  This enables support for systems based on the Picochip picoXcell
	  family of Femtocell devices.  The picoxcell support requires device tree
	  for all boards.

701 702
config ARCH_PNX4008
	bool "Philips Nexperia PNX4008 Mobile"
703
	select CPU_ARM926T
704
	select CLKDEV_LOOKUP
705
	select ARCH_USES_GETTIMEOFFSET
706 707 708
	help
	  This enables support for Philips PNX4008 mobile platform.

L
Linus Torvalds 已提交
709
config ARCH_PXA
E
eric miao 已提交
710
	bool "PXA2xx/PXA3xx-based"
711
	depends on MMU
712
	select ARCH_MTD_XIP
713
	select ARCH_HAS_CPUFREQ
714
	select CLKDEV_LOOKUP
715
	select CLKSRC_MMIO
M
Michael Buesch 已提交
716
	select ARCH_REQUIRE_GPIOLIB
717
	select GENERIC_CLOCKEVENTS
718
	select GPIO_PXA
719
	select TICK_ONESHOT
720
	select PLAT_PXA
721
	select SPARSE_IRQ
E
Eric Miao 已提交
722
	select AUTO_ZRELADDR
723
	select MULTI_IRQ_HANDLER
724
	select ARM_CPU_SUSPEND if PM
725
	select HAVE_IDE
726
	help
E
eric miao 已提交
727
	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
L
Linus Torvalds 已提交
728

729 730
config ARCH_MSM
	bool "Qualcomm MSM"
731
	select HAVE_CLK
732
	select GENERIC_CLOCKEVENTS
P
Pavel Machek 已提交
733
	select ARCH_REQUIRE_GPIOLIB
S
Stephen Boyd 已提交
734
	select CLKDEV_LOOKUP
735
	help
736 737 738 739 740
	  Support for Qualcomm MSM/QSD based systems.  This runs on the
	  apps processor of the MSM/QSD and depends on a shared memory
	  interface to the modem processor which runs the baseband
	  stack and controls some vital subsystems
	  (clock and power control, etc).
741

742
config ARCH_SHMOBILE
743 744
	bool "Renesas SH-Mobile / R-Mobile"
	select HAVE_CLK
P
Paul Mundt 已提交
745
	select CLKDEV_LOOKUP
746
	select HAVE_MACH_CLKDEV
747
	select HAVE_SMP
748
	select GENERIC_CLOCKEVENTS
749
	select MIGHT_HAVE_CACHE_L2X0
750 751
	select NO_IOPORT
	select SPARSE_IRQ
752
	select MULTI_IRQ_HANDLER
753
	select PM_GENERIC_DOMAINS if PM
754
	select NEED_MACH_MEMORY_H
755
	help
756
	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
757

L
Linus Torvalds 已提交
758 759 760 761
config ARCH_RPC
	bool "RiscPC"
	select ARCH_ACORN
	select FIQ
762
	select ARCH_MAY_HAVE_PC_FDC
763
	select HAVE_PATA_PLATFORM
764
	select ISA_DMA_API
A
Al Viro 已提交
765
	select NO_IOPORT
766
	select ARCH_SPARSEMEM_ENABLE
767
	select ARCH_USES_GETTIMEOFFSET
768
	select HAVE_IDE
769
	select NEED_MACH_IO_H
770
	select NEED_MACH_MEMORY_H
L
Linus Torvalds 已提交
771 772 773 774 775 776
	help
	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
	  CD-ROM interface, serial and parallel port, and the floppy drive.

config ARCH_SA1100
	bool "SA1100-based"
777
	select CLKSRC_MMIO
778
	select CPU_SA1100
779
	select ISA
780
	select ARCH_SPARSEMEM_ENABLE
781
	select ARCH_MTD_XIP
782
	select ARCH_HAS_CPUFREQ
R
Russell King 已提交
783
	select CPU_FREQ
784
	select GENERIC_CLOCKEVENTS
J
Jett.Zhou 已提交
785
	select CLKDEV_LOOKUP
786
	select TICK_ONESHOT
M
Michael Buesch 已提交
787
	select ARCH_REQUIRE_GPIOLIB
788
	select HAVE_IDE
789
	select NEED_MACH_MEMORY_H
790
	select SPARSE_IRQ
791 792
	help
	  Support for StrongARM 11x0 based boards.
L
Linus Torvalds 已提交
793

794 795
config ARCH_S3C24XX
	bool "Samsung S3C24XX SoCs"
D
David Brownell 已提交
796
	select GENERIC_GPIO
B
Ben Dooks 已提交
797
	select ARCH_HAS_CPUFREQ
798
	select HAVE_CLK
799
	select CLKDEV_LOOKUP
800
	select ARCH_USES_GETTIMEOFFSET
801
	select HAVE_S3C2410_I2C if I2C
802 803
	select HAVE_S3C_RTC if RTC_CLASS
	select HAVE_S3C2410_WATCHDOG if WATCHDOG
804
	select NEED_MACH_IO_H
L
Linus Torvalds 已提交
805
	help
806 807 808 809
	  Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
	  and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
	  (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
	  Samsung SMDK2410 development board (and derivatives).
810

B
Ben Dooks 已提交
811 812
config ARCH_S3C64XX
	bool "Samsung S3C64XX"
813
	select PLAT_SAMSUNG
814 815
	select CPU_V6
	select ARM_VIC
B
Ben Dooks 已提交
816
	select HAVE_CLK
M
Mark Brown 已提交
817
	select HAVE_TCM
818
	select CLKDEV_LOOKUP
819
	select NO_IOPORT
820
	select ARCH_USES_GETTIMEOFFSET
821
	select ARCH_HAS_CPUFREQ
822 823 824 825 826 827 828
	select ARCH_REQUIRE_GPIOLIB
	select SAMSUNG_CLKSRC
	select SAMSUNG_IRQ_VIC_TIMER
	select S3C_GPIO_TRACK
	select S3C_DEV_NAND
	select USB_ARCH_HAS_OHCI
	select SAMSUNG_GPIOLIB_4BIT
829
	select HAVE_S3C2410_I2C if I2C
830
	select HAVE_S3C2410_WATCHDOG if WATCHDOG
B
Ben Dooks 已提交
831 832 833
	help
	  Samsung S3C64XX series based systems

834 835
config ARCH_S5P64X0
	bool "Samsung S5P6440 S5P6450"
836 837 838
	select CPU_V6
	select GENERIC_GPIO
	select HAVE_CLK
839
	select CLKDEV_LOOKUP
840
	select CLKSRC_MMIO
841
	select HAVE_S3C2410_WATCHDOG if WATCHDOG
842
	select GENERIC_CLOCKEVENTS
843
	select HAVE_S3C2410_I2C if I2C
844
	select HAVE_S3C_RTC if RTC_CLASS
845
	help
846 847
	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
	  SMDK6450.
848

849 850
config ARCH_S5PC100
	bool "Samsung S5PC100"
851 852
	select GENERIC_GPIO
	select HAVE_CLK
853
	select CLKDEV_LOOKUP
854
	select CPU_V7
855
	select ARCH_USES_GETTIMEOFFSET
856
	select HAVE_S3C2410_I2C if I2C
857
	select HAVE_S3C_RTC if RTC_CLASS
858
	select HAVE_S3C2410_WATCHDOG if WATCHDOG
859
	help
860
	  Samsung S5PC100 series based systems
861

862 863 864
config ARCH_S5PV210
	bool "Samsung S5PV210/S5PC110"
	select CPU_V7
865
	select ARCH_SPARSEMEM_ENABLE
866
	select ARCH_HAS_HOLES_MEMORYMODEL
867 868
	select GENERIC_GPIO
	select HAVE_CLK
869
	select CLKDEV_LOOKUP
870
	select CLKSRC_MMIO
871
	select ARCH_HAS_CPUFREQ
872
	select GENERIC_CLOCKEVENTS
873
	select HAVE_S3C2410_I2C if I2C
874
	select HAVE_S3C_RTC if RTC_CLASS
875
	select HAVE_S3C2410_WATCHDOG if WATCHDOG
876
	select NEED_MACH_MEMORY_H
877 878 879
	help
	  Samsung S5PV210/S5PC110 series based systems

880 881
config ARCH_EXYNOS
	bool "SAMSUNG EXYNOS"
882
	select CPU_V7
883
	select ARCH_SPARSEMEM_ENABLE
884
	select ARCH_HAS_HOLES_MEMORYMODEL
885 886
	select GENERIC_GPIO
	select HAVE_CLK
887
	select CLKDEV_LOOKUP
888
	select ARCH_HAS_CPUFREQ
889
	select GENERIC_CLOCKEVENTS
890
	select HAVE_S3C_RTC if RTC_CLASS
891
	select HAVE_S3C2410_I2C if I2C
892
	select HAVE_S3C2410_WATCHDOG if WATCHDOG
893
	select NEED_MACH_MEMORY_H
894
	help
895
	  Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5)
896

L
Linus Torvalds 已提交
897 898
config ARCH_SHARK
	bool "Shark"
899
	select CPU_SA110
900 901
	select ISA
	select ISA_DMA
902
	select ZONE_DMA
903
	select PCI
904
	select ARCH_USES_GETTIMEOFFSET
905
	select NEED_MACH_MEMORY_H
906
	select NEED_MACH_IO_H
907 908 909
	help
	  Support for the StrongARM based Digital DNARD machine, also known
	  as "Shark" (<http://www.shark-linux.de/shark.html>).
L
Linus Torvalds 已提交
910

911 912 913
config ARCH_U300
	bool "ST-Ericsson U300 Series"
	depends on MMU
914
	select CLKSRC_MMIO
915
	select CPU_ARM926T
916
	select HAVE_TCM
917
	select ARM_AMBA
918
	select ARM_PATCH_PHYS_VIRT
919 920
	select ARM_VIC
	select GENERIC_CLOCKEVENTS
921
	select CLKDEV_LOOKUP
922
	select HAVE_MACH_CLKDEV
923
	select GENERIC_GPIO
924
	select ARCH_REQUIRE_GPIOLIB
925 926 927
	help
	  Support for ST-Ericsson U300 series mobile platforms.

928 929
config ARCH_U8500
	bool "ST-Ericsson U8500 Series"
A
Arnd Bergmann 已提交
930
	depends on MMU
931 932 933
	select CPU_V7
	select ARM_AMBA
	select GENERIC_CLOCKEVENTS
934
	select CLKDEV_LOOKUP
935
	select ARCH_REQUIRE_GPIOLIB
936
	select ARCH_HAS_CPUFREQ
937
	select HAVE_SMP
938
	select MIGHT_HAVE_CACHE_L2X0
939 940 941 942 943 944 945 946
	help
	  Support for ST-Ericsson's Ux500 architecture

config ARCH_NOMADIK
	bool "STMicroelectronics Nomadik"
	select ARM_AMBA
	select ARM_VIC
	select CPU_ARM926T
947
	select CLKDEV_LOOKUP
948
	select GENERIC_CLOCKEVENTS
949
	select MIGHT_HAVE_CACHE_L2X0
950 951 952 953
	select ARCH_REQUIRE_GPIOLIB
	help
	  Support for the Nomadik platform by ST-Ericsson

954 955 956
config ARCH_DAVINCI
	bool "TI DaVinci"
	select GENERIC_CLOCKEVENTS
957
	select ARCH_REQUIRE_GPIOLIB
958
	select ZONE_DMA
959
	select HAVE_IDE
960
	select CLKDEV_LOOKUP
D
David Brownell 已提交
961
	select GENERIC_ALLOCATOR
R
Russell King 已提交
962
	select GENERIC_IRQ_CHIP
963
	select ARCH_HAS_HOLES_MEMORYMODEL
964 965 966
	help
	  Support for TI's DaVinci platform.

967 968
config ARCH_OMAP
	bool "TI OMAP"
969
	select HAVE_CLK
M
Michael Buesch 已提交
970
	select ARCH_REQUIRE_GPIOLIB
971
	select ARCH_HAS_CPUFREQ
972
	select CLKSRC_MMIO
973
	select GENERIC_CLOCKEVENTS
974
	select ARCH_HAS_HOLES_MEMORYMODEL
975
	help
976
	  Support for TI's OMAP platform (OMAP1/2/3/4).
977

978 979 980 981
config PLAT_SPEAR
	bool "ST SPEAr"
	select ARM_AMBA
	select ARCH_REQUIRE_GPIOLIB
982
	select CLKDEV_LOOKUP
983
	select CLKSRC_MMIO
984 985 986 987 988
	select GENERIC_CLOCKEVENTS
	select HAVE_CLK
	help
	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).

989 990 991 992 993 994 995 996 997 998
config ARCH_VT8500
	bool "VIA/WonderMedia 85xx"
	select CPU_ARM926T
	select GENERIC_GPIO
	select ARCH_HAS_CPUFREQ
	select GENERIC_CLOCKEVENTS
	select ARCH_REQUIRE_GPIOLIB
	select HAVE_PWM
	help
	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
999

1000 1001
config ARCH_ZYNQ
	bool "Xilinx Zynq ARM Cortex A9 Platform"
1002 1003 1004
	select CPU_V7
	select GENERIC_CLOCKEVENTS
	select CLKDEV_LOOKUP
1005 1006 1007
	select ARM_GIC
	select ARM_AMBA
	select ICST
1008
	select MIGHT_HAVE_CACHE_L2X0
1009 1010
	select USE_OF
	help
1011
	  Support for Xilinx Zynq ARM Cortex A9 Platform
L
Linus Torvalds 已提交
1012 1013
endchoice

1014 1015 1016 1017 1018
#
# This is sorted alphabetically by mach-* pathname.  However, plat-*
# Kconfigs may be included either alphabetically (according to the
# plat- suffix) or along side the corresponding mach-* source.
#
1019 1020 1021 1022
source "arch/arm/mach-at91/Kconfig"

source "arch/arm/mach-bcmring/Kconfig"

L
Linus Torvalds 已提交
1023 1024
source "arch/arm/mach-clps711x/Kconfig"

1025 1026
source "arch/arm/mach-cns3xxx/Kconfig"

1027 1028 1029 1030
source "arch/arm/mach-davinci/Kconfig"

source "arch/arm/mach-dove/Kconfig"

1031 1032
source "arch/arm/mach-ep93xx/Kconfig"

L
Linus Torvalds 已提交
1033 1034
source "arch/arm/mach-footbridge/Kconfig"

1035 1036
source "arch/arm/mach-gemini/Kconfig"

1037 1038
source "arch/arm/mach-h720x/Kconfig"

L
Linus Torvalds 已提交
1039 1040
source "arch/arm/mach-integrator/Kconfig"

1041 1042 1043
source "arch/arm/mach-iop32x/Kconfig"

source "arch/arm/mach-iop33x/Kconfig"
L
Linus Torvalds 已提交
1044

1045 1046
source "arch/arm/mach-iop13xx/Kconfig"

L
Linus Torvalds 已提交
1047 1048 1049 1050
source "arch/arm/mach-ixp4xx/Kconfig"

source "arch/arm/mach-ixp2000/Kconfig"

1051 1052
source "arch/arm/mach-ixp23xx/Kconfig"

1053 1054 1055 1056
source "arch/arm/mach-kirkwood/Kconfig"

source "arch/arm/mach-ks8695/Kconfig"

1057 1058
source "arch/arm/mach-lpc32xx/Kconfig"

1059 1060
source "arch/arm/mach-msm/Kconfig"

1061 1062
source "arch/arm/mach-mv78xx0/Kconfig"

1063
source "arch/arm/plat-mxc/Kconfig"
L
Linus Torvalds 已提交
1064

1065 1066
source "arch/arm/mach-mxs/Kconfig"

1067
source "arch/arm/mach-netx/Kconfig"
1068

1069 1070 1071
source "arch/arm/mach-nomadik/Kconfig"
source "arch/arm/plat-nomadik/Kconfig"

1072 1073 1074
source "arch/arm/plat-omap/Kconfig"

source "arch/arm/mach-omap1/Kconfig"
L
Linus Torvalds 已提交
1075

1076 1077
source "arch/arm/mach-omap2/Kconfig"

1078
source "arch/arm/mach-orion5x/Kconfig"
1079

1080 1081
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/plat-pxa/Kconfig"
1082

1083 1084 1085 1086 1087
source "arch/arm/mach-mmp/Kconfig"

source "arch/arm/mach-realview/Kconfig"

source "arch/arm/mach-sa1100/Kconfig"
1088

1089
source "arch/arm/plat-samsung/Kconfig"
1090
source "arch/arm/plat-s3c24xx/Kconfig"
1091
source "arch/arm/plat-s5p/Kconfig"
1092

1093
source "arch/arm/plat-spear/Kconfig"
1094

1095
source "arch/arm/mach-s3c24xx/Kconfig"
1096
if ARCH_S3C24XX
1097 1098 1099
source "arch/arm/mach-s3c2412/Kconfig"
source "arch/arm/mach-s3c2440/Kconfig"
endif
L
Linus Torvalds 已提交
1100

B
Ben Dooks 已提交
1101
if ARCH_S3C64XX
1102
source "arch/arm/mach-s3c64xx/Kconfig"
B
Ben Dooks 已提交
1103 1104
endif

1105
source "arch/arm/mach-s5p64x0/Kconfig"
1106

1107 1108
source "arch/arm/mach-s5pc100/Kconfig"

1109 1110
source "arch/arm/mach-s5pv210/Kconfig"

1111
source "arch/arm/mach-exynos/Kconfig"
1112

1113
source "arch/arm/mach-shmobile/Kconfig"
1114

1115 1116
source "arch/arm/mach-tegra/Kconfig"

1117
source "arch/arm/mach-u300/Kconfig"
L
Linus Torvalds 已提交
1118

1119
source "arch/arm/mach-ux500/Kconfig"
L
Linus Torvalds 已提交
1120 1121 1122

source "arch/arm/mach-versatile/Kconfig"

1123
source "arch/arm/mach-vexpress/Kconfig"
1124
source "arch/arm/plat-versatile/Kconfig"
1125

1126 1127
source "arch/arm/mach-vt8500/Kconfig"

1128 1129
source "arch/arm/mach-w90x900/Kconfig"

L
Linus Torvalds 已提交
1130 1131 1132 1133
# Definitions to make life easier
config ARCH_ACORN
	bool

1134 1135
config PLAT_IOP
	bool
M
Mikael Pettersson 已提交
1136
	select GENERIC_CLOCKEVENTS
1137

L
Lennert Buytenhek 已提交
1138 1139
config PLAT_ORION
	bool
1140
	select CLKSRC_MMIO
R
Russell King 已提交
1141
	select GENERIC_IRQ_CHIP
L
Lennert Buytenhek 已提交
1142

1143 1144 1145
config PLAT_PXA
	bool

1146 1147 1148
config PLAT_VERSATILE
	bool

1149 1150
config ARM_TIMER_SP804
	bool
1151
	select CLKSRC_MMIO
1152
	select HAVE_SCHED_CLOCK
1153

L
Linus Torvalds 已提交
1154 1155
source arch/arm/mm/Kconfig

1156 1157 1158 1159 1160
config ARM_NR_BANKS
	int
	default 16 if ARCH_EP93XX
	default 8

1161 1162
config IWMMXT
	bool "Enable iWMMXt support"
1163 1164
	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
	default y if PXA27x || PXA3xx || PXA95x || ARCH_MMP
1165 1166 1167 1168
	help
	  Enable support for iWMMXt context switching at run time if
	  running on a CPU that supports it.

L
Linus Torvalds 已提交
1169 1170
config XSCALE_PMU
	bool
1171
	depends on CPU_XSCALE
L
Linus Torvalds 已提交
1172 1173
	default y

1174
config CPU_HAS_PMU
1175
	depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \
1176
		   (!ARCH_OMAP3 || OMAP3_EMU)
1177 1178 1179
	default y
	bool

1180 1181 1182 1183 1184
config MULTI_IRQ_HANDLER
	bool
	help
	  Allow each machine to specify it's own IRQ handler at run time.

1185 1186 1187 1188
if !MMU
source "arch/arm/Kconfig-nommu"
endif

1189 1190
config ARM_ERRATA_411920
	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
1191
	depends on CPU_V6 || CPU_V6K
1192 1193 1194 1195 1196 1197
	help
	  Invalidation of the Instruction Cache operation can
	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
	  It does not affect the MPCore. This option enables the ARM Ltd.
	  recommended workaround.

1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213
config ARM_ERRATA_430973
	bool "ARM errata: Stale prediction on replaced interworking branch"
	depends on CPU_V7
	help
	  This option enables the workaround for the 430973 Cortex-A8
	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
	  interworking branch is replaced with another code sequence at the
	  same virtual address, whether due to self-modifying code or virtual
	  to physical address re-mapping, Cortex-A8 does not recover from the
	  stale interworking branch prediction. This results in Cortex-A8
	  executing the new code sequence in the incorrect ARM or Thumb state.
	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
	  and also flushes the branch target cache at every context switch.
	  Note that setting specific bits in the ACTLR register may not be
	  available in non-secure mode.

1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226
config ARM_ERRATA_458693
	bool "ARM errata: Processor deadlock when a false hazard is created"
	depends on CPU_V7
	help
	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
	  erratum. For very specific sequences of memory operations, it is
	  possible for a hazard condition intended for a cache line to instead
	  be incorrectly associated with a different cache line. This false
	  hazard might then cause a processor deadlock. The workaround enables
	  the L1 caching of the NEON accesses and disables the PLD instruction
	  in the ACTLR register. Note that setting specific bits in the ACTLR
	  register may not be available in non-secure mode.

1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238
config ARM_ERRATA_460075
	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
	depends on CPU_V7
	help
	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
	  erratum. Any asynchronous access to the L2 cache may encounter a
	  situation in which recent store transactions to the L2 cache are lost
	  and overwritten with stale memory contents from external memory. The
	  workaround disables the write-allocate mode for the L2 cache via the
	  ACTLR register. Note that setting specific bits in the ACTLR register
	  may not be available in non-secure mode.

1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250
config ARM_ERRATA_742230
	bool "ARM errata: DMB operation may be faulty"
	depends on CPU_V7 && SMP
	help
	  This option enables the workaround for the 742230 Cortex-A9
	  (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
	  between two write operations may not ensure the correct visibility
	  ordering of the two writes. This workaround sets a specific bit in
	  the diagnostic register of the Cortex-A9 which causes the DMB
	  instruction to behave as a DSB, ensuring the correct behaviour of
	  the two writes.

1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264
config ARM_ERRATA_742231
	bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
	depends on CPU_V7 && SMP
	help
	  This option enables the workaround for the 742231 Cortex-A9
	  (r2p0..r2p2) erratum. Under certain conditions, specific to the
	  Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
	  accessing some data located in the same cache line, may get corrupted
	  data due to bad handling of the address hazard when the line gets
	  replaced from one of the CPUs at the same time as another CPU is
	  accessing it. This workaround sets specific bits in the diagnostic
	  register of the Cortex-A9 which reduces the linefill issuing
	  capabilities of the processor.

1265
config PL310_ERRATA_588369
1266
	bool "PL310 errata: Clean & Invalidate maintenance operations do not invalidate clean lines"
1267
	depends on CACHE_L2X0
1268 1269 1270 1271 1272 1273 1274 1275
	help
	   The PL310 L2 cache controller implements three types of Clean &
	   Invalidate maintenance operations: by Physical Address
	   (offset 0x7F0), by Index/Way (0x7F8) and by Way (0x7FC).
	   They are architecturally defined to behave as the execution of a
	   clean operation followed immediately by an invalidate operation,
	   both performing to the same memory location. This functionality
	   is not correctly implemented in PL310 as clean lines are not
1276
	   invalidated as a result of these operations.
1277 1278 1279

config ARM_ERRATA_720789
	bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
1280
	depends on CPU_V7
1281 1282 1283 1284 1285 1286 1287 1288
	help
	  This option enables the workaround for the 720789 Cortex-A9 (prior to
	  r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
	  broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
	  As a consequence of this erratum, some TLB entries which should be
	  invalidated are not, resulting in an incoherency in the system page
	  tables. The workaround changes the TLB flushing routines to invalidate
	  entries regardless of the ASID.
1289

R
Russell King 已提交
1290
config PL310_ERRATA_727915
1291
	bool "PL310 errata: Background Clean & Invalidate by Way operation can cause data corruption"
R
Russell King 已提交
1292 1293 1294 1295 1296 1297 1298 1299 1300
	depends on CACHE_L2X0
	help
	  PL310 implements the Clean & Invalidate by Way L2 cache maintenance
	  operation (offset 0x7FC). This operation runs in background so that
	  PL310 can handle normal accesses while it is in progress. Under very
	  rare circumstances, due to this erratum, write data can be lost when
	  PL310 treats a cacheable write transaction during a Clean &
	  Invalidate by Way operation.

1301 1302 1303 1304 1305
config ARM_ERRATA_743622
	bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
	depends on CPU_V7
	help
	  This option enables the workaround for the 743622 Cortex-A9
1306
	  (r2p*) erratum. Under very rare conditions, a faulty
1307 1308 1309 1310 1311 1312 1313
	  optimisation in the Cortex-A9 Store Buffer may lead to data
	  corruption. This workaround sets a specific bit in the diagnostic
	  register of the Cortex-A9 which disables the Store Buffer
	  optimisation, preventing the defect from occurring. This has no
	  visible impact on the overall performance or power consumption of the
	  processor.

1314 1315
config ARM_ERRATA_751472
	bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
1316
	depends on CPU_V7
1317 1318 1319 1320 1321 1322 1323
	help
	  This option enables the workaround for the 751472 Cortex-A9 (prior
	  to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
	  completion of a following broadcasted operation if the second
	  operation is received by a CPU before the ICIALLUIS has completed,
	  potentially leading to corrupted entries in the cache or TLB.

1324 1325
config PL310_ERRATA_753970
	bool "PL310 errata: cache sync operation may be faulty"
1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338
	depends on CACHE_PL310
	help
	  This option enables the workaround for the 753970 PL310 (r3p0) erratum.

	  Under some condition the effect of cache sync operation on
	  the store buffer still remains when the operation completes.
	  This means that the store buffer is always asked to drain and
	  this prevents it from merging any further writes. The workaround
	  is to replace the normal offset of cache sync operation (0x730)
	  by another offset targeting an unmapped PL310 register 0x740.
	  This has the same effect as the cache sync operation: store buffer
	  drain and waiting for all buffers empty.

1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349
config ARM_ERRATA_754322
	bool "ARM errata: possible faulty MMU translations following an ASID switch"
	depends on CPU_V7
	help
	  This option enables the workaround for the 754322 Cortex-A9 (r2p*,
	  r3p*) erratum. A speculative memory access may cause a page table walk
	  which starts prior to an ASID switch but completes afterwards. This
	  can populate the micro-TLB with a stale entry which may be hit with
	  the new ASID. This workaround places two dsb instructions in the mm
	  switching code so that no page table walks can cross the ASID switch.

1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360
config ARM_ERRATA_754327
	bool "ARM errata: no automatic Store Buffer drain"
	depends on CPU_V7 && SMP
	help
	  This option enables the workaround for the 754327 Cortex-A9 (prior to
	  r2p0) erratum. The Store Buffer does not have any automatic draining
	  mechanism and therefore a livelock may occur if an external agent
	  continuously polls a memory location waiting to observe an update.
	  This workaround defines cpu_relax() as smp_mb(), preventing correctly
	  written polling loops from denying visibility of updates to memory.

1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372
config ARM_ERRATA_364296
	bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
	depends on CPU_V6 && !SMP
	help
	  This options enables the workaround for the 364296 ARM1136
	  r0p2 erratum (possible cache data corruption with
	  hit-under-miss enabled). It sets the undocumented bit 31 in
	  the auxiliary control register and the FI bit in the control
	  register, thus disabling hit-under-miss without putting the
	  processor into full low interrupt latency mode. ARM11MPCore
	  is not affected.

1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386
config ARM_ERRATA_764369
	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
	depends on CPU_V7 && SMP
	help
	  This option enables the workaround for erratum 764369
	  affecting Cortex-A9 MPCore with two or more processors (all
	  current revisions). Under certain timing circumstances, a data
	  cache line maintenance operation by MVA targeting an Inner
	  Shareable memory region may fail to proceed up to either the
	  Point of Coherency or to the Point of Unification of the
	  system. This workaround adds a DSB instruction before the
	  relevant cache maintenance functions and sets a specific bit
	  in the diagnostic control register of the SCU.

1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398
config PL310_ERRATA_769419
	bool "PL310 errata: no automatic Store Buffer drain"
	depends on CACHE_L2X0
	help
	  On revisions of the PL310 prior to r3p2, the Store Buffer does
	  not automatically drain. This can cause normal, non-cacheable
	  writes to be retained when the memory system is idle, leading
	  to suboptimal I/O performance for drivers using coherent DMA.
	  This option adds a write barrier to the cpu_idle loop so that,
	  on systems with an outer cache, the store buffer is drained
	  explicitly.

L
Linus Torvalds 已提交
1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416
endmenu

source "arch/arm/common/Kconfig"

menu "Bus support"

config ARM_AMBA
	bool

config ISA
	bool
	help
	  Find out whether you have ISA slots on your motherboard.  ISA is the
	  name of a bus system, i.e. the way the CPU talks to the other stuff
	  inside your box.  Other bus systems are PCI, EISA, MicroChannel
	  (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
	  newer boards don't support it.  If you have ISA, say Y, otherwise N.

1417
# Select ISA DMA controller support
L
Linus Torvalds 已提交
1418 1419
config ISA_DMA
	bool
1420
	select ISA_DMA_API
L
Linus Torvalds 已提交
1421

1422
# Select ISA DMA interface
A
Al Viro 已提交
1423 1424 1425
config ISA_DMA_API
	bool

L
Linus Torvalds 已提交
1426
config PCI
1427
	bool "PCI support" if MIGHT_HAVE_PCI
L
Linus Torvalds 已提交
1428 1429 1430 1431 1432 1433
	help
	  Find out whether you have a PCI motherboard. PCI is the name of a
	  bus system, i.e. the way the CPU talks to the other stuff inside
	  your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
	  VESA. If you have PCI, say Y, otherwise N.

1434 1435 1436 1437
config PCI_DOMAINS
	bool
	depends on PCI

1438 1439 1440 1441 1442 1443
config PCI_NANOENGINE
	bool "BSE nanoEngine PCI support"
	depends on SA1100_NANOENGINE
	help
	  Enable PCI on the BSE nanoEngine board.

1444 1445 1446
config PCI_SYSCALL
	def_bool PCI

L
Linus Torvalds 已提交
1447 1448 1449 1450 1451 1452
# Select the host bridge type
config PCI_HOST_VIA82C505
	bool
	depends on PCI && ARCH_SHARK
	default y

M
Mike Rapoport 已提交
1453 1454 1455 1456 1457 1458
config PCI_HOST_ITE8152
	bool
	depends on PCI && MACH_ARMCORE
	default y
	select DMABOUNCE

L
Linus Torvalds 已提交
1459 1460 1461 1462 1463 1464 1465 1466
source "drivers/pci/Kconfig"

source "drivers/pcmcia/Kconfig"

endmenu

menu "Kernel Features"

1467 1468
source "kernel/time/Kconfig"

1469 1470 1471 1472 1473 1474 1475 1476 1477
config HAVE_SMP
	bool
	help
	  This option should be selected by machines which have an SMP-
	  capable CPU.

	  The only effect of this option is to make the SMP-related
	  options available to the user for configuration.

L
Linus Torvalds 已提交
1478
config SMP
1479
	bool "Symmetric Multi-Processing"
1480
	depends on CPU_V6K || CPU_V7
1481
	depends on GENERIC_CLOCKEVENTS
1482
	depends on HAVE_SMP
A
Arnd Bergmann 已提交
1483
	depends on MMU
1484
	select USE_GENERIC_SMP_HELPERS
1485
	select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
L
Linus Torvalds 已提交
1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496
	help
	  This enables support for systems with more than one CPU. If you have
	  a system with only one CPU, like most personal computers, say N. If
	  you have a system with more than one CPU, say Y.

	  If you say N here, the kernel will run on single and multiprocessor
	  machines, but will use only one CPU of a multiprocessor machine. If
	  you say Y here, the kernel will run on many, but not all, single
	  processor machines. On a single processor machine, the kernel will
	  run faster if you say N here.

P
Paul Bolle 已提交
1497
	  See also <file:Documentation/x86/i386/IO-APIC.txt>,
L
Linus Torvalds 已提交
1498
	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
1499
	  <http://tldp.org/HOWTO/SMP-HOWTO.html>.
L
Linus Torvalds 已提交
1500 1501 1502

	  If you don't know what to do here, say N.

1503 1504 1505
config SMP_ON_UP
	bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
	depends on EXPERIMENTAL
1506
	depends on SMP && !XIP_KERNEL
1507 1508 1509 1510 1511 1512 1513 1514 1515
	default y
	help
	  SMP kernels contain instructions which fail on non-SMP processors.
	  Enabling this option allows the kernel to modify itself to make
	  these instructions safe.  Disabling it allows about 1K of space
	  savings.

	  If you don't know what to do here, say Y.

1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540
config ARM_CPU_TOPOLOGY
	bool "Support cpu topology definition"
	depends on SMP && CPU_V7
	default y
	help
	  Support ARM cpu topology definition. The MPIDR register defines
	  affinity between processors which is then used to describe the cpu
	  topology of an ARM System.

config SCHED_MC
	bool "Multi-core scheduler support"
	depends on ARM_CPU_TOPOLOGY
	help
	  Multi-core scheduler support improves the CPU scheduler's decision
	  making when dealing with multi-core CPU chips at a cost of slightly
	  increased overhead in some places. If unsure say N here.

config SCHED_SMT
	bool "SMT scheduler support"
	depends on ARM_CPU_TOPOLOGY
	help
	  Improves the CPU scheduler's decision making when dealing with
	  MultiThreading at a cost of slightly increased overhead in some
	  places. If unsure say N here.

1541 1542 1543 1544 1545
config HAVE_ARM_SCU
	bool
	help
	  This option enables support for the ARM system coherency unit

1546 1547 1548
config HAVE_ARM_TWD
	bool
	depends on SMP
R
Russell King 已提交
1549
	select TICK_ONESHOT
1550 1551 1552
	help
	  This options enables support for the ARM timer and watchdog unit

1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575
choice
	prompt "Memory split"
	default VMSPLIT_3G
	help
	  Select the desired split between kernel and user memory.

	  If you are not absolutely sure what you are doing, leave this
	  option alone!

	config VMSPLIT_3G
		bool "3G/1G user/kernel split"
	config VMSPLIT_2G
		bool "2G/2G user/kernel split"
	config VMSPLIT_1G
		bool "1G/3G user/kernel split"
endchoice

config PAGE_OFFSET
	hex
	default 0x40000000 if VMSPLIT_1G
	default 0x80000000 if VMSPLIT_2G
	default 0xC0000000

L
Linus Torvalds 已提交
1576 1577 1578 1579 1580 1581
config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "4"

1582 1583 1584 1585 1586 1587 1588
config HOTPLUG_CPU
	bool "Support for hot-pluggable CPUs (EXPERIMENTAL)"
	depends on SMP && HOTPLUG && EXPERIMENTAL
	help
	  Say Y here to experiment with turning CPUs off and on.  CPUs
	  can be controlled through /sys/devices/system/cpu.

1589 1590
config LOCAL_TIMERS
	bool "Use local timer interrupts"
1591
	depends on SMP
1592
	default y
1593
	select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
1594 1595 1596 1597 1598 1599
	help
	  Enable support for local timers on SMP platforms, rather then the
	  legacy IPI broadcast method.  Local timers allows the system
	  accounting to be spread across the timer interval, preventing a
	  "thundering herd" at every timer tick.

1600 1601
config ARCH_NR_GPIO
	int
1602
	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
1603
	default 355 if ARCH_U8500
1604
	default 264 if MACH_H4700
1605 1606 1607 1608 1609 1610
	default 0
	help
	  Maximum number of GPIOs in the system.

	  If unsure, leave the default value.

1611
source kernel/Kconfig.preempt
L
Linus Torvalds 已提交
1612

1613 1614
config HZ
	int
1615
	default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \
K
Kukjin Kim 已提交
1616
		ARCH_S5PV210 || ARCH_EXYNOS4
1617
	default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
1618
	default AT91_TIMER_HZ if ARCH_AT91
1619
	default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
1620 1621
	default 100

1622
config THUMB2_KERNEL
1623
	bool "Compile the kernel in Thumb-2 mode (EXPERIMENTAL)"
1624
	depends on CPU_V7 && !CPU_V6 && !CPU_V6K && EXPERIMENTAL
1625 1626
	select AEABI
	select ARM_ASM_UNIFIED
1627
	select ARM_UNWIND
1628 1629 1630 1631 1632 1633 1634
	help
	  By enabling this option, the kernel will be compiled in
	  Thumb-2 mode. A compiler/assembler that understand the unified
	  ARM-Thumb syntax is needed.

	  If unsure, say N.

1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665
config THUMB2_AVOID_R_ARM_THM_JUMP11
	bool "Work around buggy Thumb-2 short branch relocations in gas"
	depends on THUMB2_KERNEL && MODULES
	default y
	help
	  Various binutils versions can resolve Thumb-2 branches to
	  locally-defined, preemptible global symbols as short-range "b.n"
	  branch instructions.

	  This is a problem, because there's no guarantee the final
	  destination of the symbol, or any candidate locations for a
	  trampoline, are within range of the branch.  For this reason, the
	  kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
	  relocation in modules at all, and it makes little sense to add
	  support.

	  The symptom is that the kernel fails with an "unsupported
	  relocation" error when loading some modules.

	  Until fixed tools are available, passing
	  -fno-optimize-sibling-calls to gcc should prevent gcc generating
	  code which hits this problem, at the cost of a bit of extra runtime
	  stack usage in some cases.

	  The problem is described in more detail at:
	      https://bugs.launchpad.net/binutils-linaro/+bug/725126

	  Only Thumb-2 kernels are affected.

	  Unless you are sure your tools don't have this problem, say Y.

1666 1667 1668
config ARM_ASM_UNIFIED
	bool

1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683
config AEABI
	bool "Use the ARM EABI to compile the kernel"
	help
	  This option allows for the kernel to be compiled using the latest
	  ARM ABI (aka EABI).  This is only useful if you are using a user
	  space environment that is also compiled with EABI.

	  Since there are major incompatibilities between the legacy ABI and
	  EABI, especially with regard to structure member alignment, this
	  option also changes the kernel syscall calling convention to
	  disambiguate both ABIs and allow for backward compatibility support
	  (selected with CONFIG_OABI_COMPAT).

	  To use this you need GCC version 4.0.0 or later.

1684
config OABI_COMPAT
1685
	bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1686
	depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700
	default y
	help
	  This option preserves the old syscall interface along with the
	  new (ARM EABI) one. It also provides a compatibility layer to
	  intercept syscalls that have structure arguments which layout
	  in memory differs between the legacy ABI and the new ARM EABI
	  (only for non "thumb" binaries). This option adds a tiny
	  overhead to all syscalls and produces a slightly larger kernel.
	  If you know you'll be using only pure EABI user space then you
	  can say N here. If this option is not selected and you attempt
	  to execute a legacy ABI binary then the result will be
	  UNPREDICTABLE (in fact it can be predicted that it won't work
	  at all). If in doubt say Y.

1701
config ARCH_HAS_HOLES_MEMORYMODEL
1702 1703
	bool

1704 1705 1706
config ARCH_SPARSEMEM_ENABLE
	bool

1707 1708 1709
config ARCH_SPARSEMEM_DEFAULT
	def_bool ARCH_SPARSEMEM_ENABLE

1710
config ARCH_SELECT_MEMORY_MODEL
R
Russell King 已提交
1711
	def_bool ARCH_SPARSEMEM_ENABLE
Y
Yasunori Goto 已提交
1712

1713 1714 1715
config HAVE_ARCH_PFN_VALID
	def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM

N
Nicolas Pitre 已提交
1716
config HIGHMEM
1717 1718
	bool "High Memory Support"
	depends on MMU
N
Nicolas Pitre 已提交
1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732
	help
	  The address space of ARM processors is only 4 Gigabytes large
	  and it has to accommodate user address space, kernel address
	  space as well as some memory mapped IO. That means that, if you
	  have a large amount of physical memory and/or IO, not all of the
	  memory can be "permanently mapped" by the kernel. The physical
	  memory that is not permanently mapped is called "high memory".

	  Depending on the selected kernel/user memory split, minimum
	  vmalloc space and actual amount of RAM, you may not need this
	  option which should result in a slightly faster kernel.

	  If unsure, say n.

R
Russell King 已提交
1733 1734 1735 1736
config HIGHPTE
	bool "Allocate 2nd-level pagetables from highmem"
	depends on HIGHMEM

1737 1738
config HW_PERF_EVENTS
	bool "Enable hardware performance counter support for perf events"
1739
	depends on PERF_EVENTS && CPU_HAS_PMU
1740 1741 1742 1743 1744
	default y
	help
	  Enable hardware performance counter support for perf events. If
	  disabled, perf events will use software events only.

1745 1746
source "mm/Kconfig"

1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762
config FORCE_MAX_ZONEORDER
	int "Maximum zone order" if ARCH_SHMOBILE
	range 11 64 if ARCH_SHMOBILE
	default "9" if SA1111
	default "11"
	help
	  The kernel memory allocator divides physically contiguous memory
	  blocks into "zones", where each zone is a power of two number of
	  pages.  This option selects the largest power of two that the kernel
	  keeps in the memory allocator.  If you need to allocate very large
	  blocks of physically contiguous memory, then you may need to
	  increase this value.

	  This config option is actually maximum order plus one. For example,
	  a value of 11 means that the largest free memory block is 2^10 pages.

L
Linus Torvalds 已提交
1763 1764
config LEDS
	bool "Timer and CPU usage LEDs"
1765
	depends on ARCH_CDB89712 || ARCH_EBSA110 || \
1766
		   ARCH_EBSA285 || ARCH_INTEGRATOR || \
L
Linus Torvalds 已提交
1767 1768
		   ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
		   ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
1769
		   ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
1770
		   ARCH_AT91 || ARCH_DAVINCI || \
1771
		   ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
L
Linus Torvalds 已提交
1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784
	help
	  If you say Y here, the LEDs on your machine will be used
	  to provide useful information about your current system status.

	  If you are compiling a kernel for a NetWinder or EBSA-285, you will
	  be able to select which LEDs are active using the options below. If
	  you are compiling a kernel for the EBSA-110 or the LART however, the
	  red LED will simply flash regularly to indicate that the system is
	  still functional. It is safe to say Y here if you have a CATS
	  system, but the driver will do nothing.

config LEDS_TIMER
	bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \
D
David Brownell 已提交
1785 1786
			    OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
			    || MACH_OMAP_PERSEUS2
L
Linus Torvalds 已提交
1787
	depends on LEDS
1788
	depends on !GENERIC_CLOCKEVENTS
L
Linus Torvalds 已提交
1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802
	default y if ARCH_EBSA110
	help
	  If you say Y here, one of the system LEDs (the green one on the
	  NetWinder, the amber one on the EBSA285, or the red one on the LART)
	  will flash regularly to indicate that the system is still
	  operational. This is mainly useful to kernel hackers who are
	  debugging unstable kernels.

	  The LART uses the same LED for both Timer LED and CPU usage LED
	  functions. You may choose to use both, but the Timer LED function
	  will overrule the CPU usage LED.

config LEDS_CPU
	bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \
D
David Brownell 已提交
1803 1804 1805
			!ARCH_OMAP) \
			|| OMAP_OSK_MISTRAL || MACH_OMAP_H2 \
			|| MACH_OMAP_PERSEUS2
L
Linus Torvalds 已提交
1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817
	depends on LEDS
	help
	  If you say Y here, the red LED will be used to give a good real
	  time indication of CPU usage, by lighting whenever the idle task
	  is not currently executing.

	  The LART uses the same LED for both Timer LED and CPU usage LED
	  functions. You may choose to use both, but the Timer LED function
	  will overrule the CPU usage LED.

config ALIGNMENT_TRAP
	bool
1818
	depends on CPU_CP15_MMU
L
Linus Torvalds 已提交
1819
	default y if !ARCH_EBSA110
1820
	select HAVE_PROC_CPU if PROC_FS
L
Linus Torvalds 已提交
1821
	help
1822
	  ARM processors cannot fetch/store information which is not
L
Linus Torvalds 已提交
1823 1824 1825 1826 1827 1828 1829
	  naturally aligned on the bus, i.e., a 4 byte fetch must start at an
	  address divisible by 4. On 32-bit ARM processors, these non-aligned
	  fetch/store instructions will be emulated in software if you say
	  here, which has a severe performance impact. This is necessary for
	  correct operation of some network protocols. With an IP-only
	  configuration it is safe to say N, otherwise say Y.

1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845
config UACCESS_WITH_MEMCPY
	bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)"
	depends on MMU && EXPERIMENTAL
	default y if CPU_FEROCEON
	help
	  Implement faster copy_to_user and clear_user methods for CPU
	  cores where a 8-word STM instruction give significantly higher
	  memory write throughput than a sequence of individual 32bit stores.

	  A possible side effect is a slight increase in scheduling latency
	  between threads sharing the same address space if they invoke
	  such copy operations with large buffers.

	  However, if the CPU data cache is using a write-allocate mode,
	  this option is unlikely to provide any performance gain.

N
Nicolas Pitre 已提交
1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859
config SECCOMP
	bool
	prompt "Enable seccomp to safely compute untrusted bytecode"
	---help---
	  This kernel feature is useful for number crunching applications
	  that may need to compute untrusted bytecode during their
	  execution. By using pipes or other transports made available to
	  the process as file descriptors supporting the read/write
	  syscalls, it's possible to isolate those applications in
	  their own address space using seccomp. Once seccomp is
	  enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
	  and the task is only allowed to execute a few safe syscalls
	  defined by each seccomp mode.

1860 1861
config CC_STACKPROTECTOR
	bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
1862
	depends on EXPERIMENTAL
1863 1864 1865 1866 1867 1868 1869 1870 1871 1872
	help
	  This option turns on the -fstack-protector GCC feature. This
	  feature puts, at the beginning of functions, a canary value on
	  the stack just before the return address, and validates
	  the value just before actually returning.  Stack based buffer
	  overflows (that need to overwrite this return address) now also
	  overwrite the canary, which gets detected and the attack is then
	  neutralized via a kernel panic.
	  This feature requires gcc version 4.2 or above.

1873 1874 1875 1876 1877 1878
config DEPRECATED_PARAM_STRUCT
	bool "Provide old way to pass kernel parameters"
	help
	  This was deprecated in 2001 and announced to live on for 5 years.
	  Some old boot loaders still use this way.

L
Linus Torvalds 已提交
1879 1880 1881 1882
endmenu

menu "Boot options"

G
Grant Likely 已提交
1883 1884 1885 1886
config USE_OF
	bool "Flattened Device Tree support"
	select OF
	select OF_EARLY_FLATTREE
1887
	select IRQ_DOMAIN
G
Grant Likely 已提交
1888 1889 1890
	help
	  Include support for flattened device tree machine descriptions.

L
Linus Torvalds 已提交
1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907
# Compressed boot loader in ROM.  Yes, we really want to ask about
# TEXT and BSS so we preserve their values in the config files.
config ZBOOT_ROM_TEXT
	hex "Compressed ROM boot loader base address"
	default "0"
	help
	  The physical address at which the ROM-able zImage is to be
	  placed in the target.  Platforms which normally make use of
	  ROM-able zImage formats normally set this to a suitable
	  value in their defconfig file.

	  If ZBOOT_ROM is not enabled, this has no effect.

config ZBOOT_ROM_BSS
	hex "Compressed ROM boot loader BSS address"
	default "0"
	help
1908 1909 1910 1911 1912 1913
	  The base address of an area of read/write memory in the target
	  for the ROM-able zImage which must be available while the
	  decompressor is running. It must be large enough to hold the
	  entire decompressed kernel plus an additional 128 KiB.
	  Platforms which normally make use of ROM-able zImage formats
	  normally set this to a suitable value in their defconfig file.
L
Linus Torvalds 已提交
1914 1915 1916 1917 1918 1919 1920 1921 1922 1923

	  If ZBOOT_ROM is not enabled, this has no effect.

config ZBOOT_ROM
	bool "Compressed boot loader in ROM/flash"
	depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
	help
	  Say Y here if you intend to execute your compressed kernel image
	  (zImage) directly from ROM or flash.  If unsure, say N.

1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940
choice
	prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
	depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
	default ZBOOT_ROM_NONE
	help
	  Include experimental SD/MMC loading code in the ROM-able zImage.
	  With this enabled it is possible to write the the ROM-able zImage
	  kernel image to an MMC or SD card and boot the kernel straight
	  from the reset vector. At reset the processor Mask ROM will load
	  the first part of the the ROM-able zImage which in turn loads the
	  rest the kernel image to RAM.

config ZBOOT_ROM_NONE
	bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
	help
	  Do not load image from SD or MMC

1941 1942 1943
config ZBOOT_ROM_MMCIF
	bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
	help
1944 1945 1946 1947 1948 1949 1950 1951
	  Load image from MMCIF hardware block.

config ZBOOT_ROM_SH_MOBILE_SDHI
	bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
	help
	  Load image from SDHI hardware block

endchoice
1952

1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972
config ARM_APPENDED_DTB
	bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
	depends on OF && !ZBOOT_ROM && EXPERIMENTAL
	help
	  With this option, the boot code will look for a device tree binary
	  (DTB) appended to zImage
	  (e.g. cat zImage <filename>.dtb > zImage_w_dtb).

	  This is meant as a backward compatibility convenience for those
	  systems with a bootloader that can't be upgraded to accommodate
	  the documented boot protocol using a device tree.

	  Beware that there is very little in terms of protection against
	  this option being confused by leftover garbage in memory that might
	  look like a DTB header after a reboot if no actual DTB is appended
	  to zImage.  Do not leave this option active in a production kernel
	  if you don't intend to always append a DTB.  Proper passing of the
	  location into r2 of a bootloader provided DTB is always preferable
	  to this option.

1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984
config ARM_ATAG_DTB_COMPAT
	bool "Supplement the appended DTB with traditional ATAG information"
	depends on ARM_APPENDED_DTB
	help
	  Some old bootloaders can't be updated to a DTB capable one, yet
	  they provide ATAGs with memory configuration, the ramdisk address,
	  the kernel cmdline string, etc.  Such information is dynamically
	  provided by the bootloader and can't always be stored in a static
	  DTB.  To allow a device tree enabled kernel to be used with such
	  bootloaders, this option allows zImage to extract the information
	  from the ATAG list and store it at run time into the appended DTB.

L
Linus Torvalds 已提交
1985 1986 1987 1988 1989 1990 1991 1992 1993 1994
config CMDLINE
	string "Default kernel command string"
	default ""
	help
	  On some architectures (EBSA110 and CATS), there is currently no way
	  for the boot loader to pass arguments to the kernel. For these
	  architectures, you should supply some command-line options at build
	  time by entering them here. As a minimum, you should specify the
	  memory size and the root device (e.g., mem=64M root=/dev/nfs).

1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011
choice
	prompt "Kernel command line type" if CMDLINE != ""
	default CMDLINE_FROM_BOOTLOADER

config CMDLINE_FROM_BOOTLOADER
	bool "Use bootloader kernel arguments if available"
	help
	  Uses the command-line options passed by the boot loader. If
	  the boot loader doesn't provide any, the default kernel command
	  string provided in CMDLINE will be used.

config CMDLINE_EXTEND
	bool "Extend bootloader kernel arguments"
	help
	  The command-line arguments provided by the boot loader will be
	  appended to the default kernel command string.

2012 2013 2014 2015 2016 2017 2018
config CMDLINE_FORCE
	bool "Always use the default kernel command string"
	help
	  Always use the default kernel command string, even if the boot
	  loader passes other arguments to the kernel.
	  This is useful if you cannot or don't want to change the
	  command-line options your boot loader passes to the kernel.
2019
endchoice
2020

L
Linus Torvalds 已提交
2021 2022
config XIP_KERNEL
	bool "Kernel Execute-In-Place from ROM"
2023
	depends on !ZBOOT_ROM && !ARM_LPAE
L
Linus Torvalds 已提交
2024 2025 2026 2027 2028 2029 2030 2031 2032 2033 2034 2035 2036 2037 2038 2039 2040 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050
	help
	  Execute-In-Place allows the kernel to run from non-volatile storage
	  directly addressable by the CPU, such as NOR flash. This saves RAM
	  space since the text section of the kernel is not loaded from flash
	  to RAM.  Read-write sections, such as the data section and stack,
	  are still copied to RAM.  The XIP kernel is not compressed since
	  it has to run directly from flash, so it will take more space to
	  store it.  The flash address used to link the kernel object files,
	  and for storing it, is configuration dependent. Therefore, if you
	  say Y here, you must know the proper physical address where to
	  store the kernel image depending on your own flash memory usage.

	  Also note that the make target becomes "make xipImage" rather than
	  "make zImage" or "make Image".  The final kernel binary to put in
	  ROM memory will be arch/arm/boot/xipImage.

	  If unsure, say N.

config XIP_PHYS_ADDR
	hex "XIP Kernel Physical Location"
	depends on XIP_KERNEL
	default "0x00080000"
	help
	  This is the physical address in your flash memory the kernel will
	  be linked for and stored to.  This address is dependent on your
	  own flash usage.

R
Richard Purdie 已提交
2051 2052
config KEXEC
	bool "Kexec system call (EXPERIMENTAL)"
2053
	depends on EXPERIMENTAL && (!SMP || HOTPLUG_CPU)
R
Richard Purdie 已提交
2054 2055 2056
	help
	  kexec is a system call that implements the ability to shutdown your
	  current kernel, and to start another kernel.  It is like a reboot
M
Matt LaPlante 已提交
2057
	  but it is independent of the system firmware.   And like a reboot
R
Richard Purdie 已提交
2058 2059 2060 2061 2062 2063 2064
	  you can start any kernel with it, not just Linux.

	  It is an ongoing process to be certain the hardware in a machine
	  is properly shutdown, so do not be surprised if this code does not
	  initially work for you.  It may help to enable device hotplugging
	  support.

2065 2066
config ATAGS_PROC
	bool "Export atags in procfs"
2067 2068
	depends on KEXEC
	default y
2069 2070 2071 2072
	help
	  Should the atags used to boot the kernel be exported in an "atags"
	  file in procfs. Useful with kexec.

2073 2074 2075 2076 2077 2078 2079 2080 2081 2082 2083 2084 2085
config CRASH_DUMP
	bool "Build kdump crash kernel (EXPERIMENTAL)"
	depends on EXPERIMENTAL
	help
	  Generate crash dump after being started by kexec. This should
	  be normally only set in special crash dump kernels which are
	  loaded in the main kernel with kexec-tools into a specially
	  reserved region and then later executed after a crash by
	  kdump/kexec. The crash dump kernel must be compiled to a
	  memory address not used by the main kernel

	  For more details see Documentation/kdump/kdump.txt

2086 2087 2088 2089 2090 2091 2092 2093 2094 2095
config AUTO_ZRELADDR
	bool "Auto calculation of the decompressed kernel image address"
	depends on !ZBOOT_ROM && !ARCH_U300
	help
	  ZRELADDR is the physical address where the decompressed kernel
	  image will be placed. If AUTO_ZRELADDR is selected, the address
	  will be determined at run-time by masking the current IP with
	  0xf8000000. This assumes the zImage being placed in the first 128MB
	  from start of memory.

L
Linus Torvalds 已提交
2096 2097
endmenu

2098
menu "CPU Power Management"
L
Linus Torvalds 已提交
2099

2100
if ARCH_HAS_CPUFREQ
L
Linus Torvalds 已提交
2101 2102 2103

source "drivers/cpufreq/Kconfig"

Y
Yong Shen 已提交
2104 2105 2106 2107 2108 2109
config CPU_FREQ_IMX
	tristate "CPUfreq driver for i.MX CPUs"
	depends on ARCH_MXC && CPU_FREQ
	help
	  This enables the CPUfreq driver for i.MX CPUs.

L
Linus Torvalds 已提交
2110 2111 2112 2113 2114 2115 2116 2117 2118 2119 2120 2121 2122 2123 2124 2125 2126
config CPU_FREQ_SA1100
	bool

config CPU_FREQ_SA1110
	bool

config CPU_FREQ_INTEGRATOR
	tristate "CPUfreq driver for ARM Integrator CPUs"
	depends on ARCH_INTEGRATOR && CPU_FREQ
	default y
	help
	  This enables the CPUfreq driver for ARM Integrator CPUs.

	  For details, take a look at <file:Documentation/cpu-freq>.

	  If in doubt, say Y.

R
Russell King 已提交
2127 2128 2129 2130
config CPU_FREQ_PXA
	bool
	depends on CPU_FREQ && ARCH_PXA && PXA25x
	default y
2131
	select CPU_FREQ_TABLE
R
Russell King 已提交
2132 2133
	select CPU_FREQ_DEFAULT_GOV_USERSPACE

B
Ben Dooks 已提交
2134 2135 2136 2137 2138 2139
config CPU_FREQ_S3C
	bool
	help
	  Internal configuration node for common cpufreq on Samsung SoC

config CPU_FREQ_S3C24XX
2140
	bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
2141
	depends on ARCH_S3C24XX && CPU_FREQ && EXPERIMENTAL
B
Ben Dooks 已提交
2142 2143 2144 2145 2146 2147 2148 2149 2150 2151
	select CPU_FREQ_S3C
	help
	  This enables the CPUfreq driver for the Samsung S3C24XX family
	  of CPUs.

	  For details, take a look at <file:Documentation/cpu-freq>.

	  If in doubt, say N.

config CPU_FREQ_S3C24XX_PLL
2152
	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"
B
Ben Dooks 已提交
2153 2154 2155 2156 2157 2158 2159 2160 2161 2162 2163 2164 2165 2166 2167 2168 2169 2170 2171 2172 2173
	depends on CPU_FREQ_S3C24XX && EXPERIMENTAL
	help
	  Compile in support for changing the PLL frequency from the
	  S3C24XX series CPUfreq driver. The PLL takes time to settle
	  after a frequency change, so by default it is not enabled.

	  This also means that the PLL tables for the selected CPU(s) will
	  be built which may increase the size of the kernel image.

config CPU_FREQ_S3C24XX_DEBUG
	bool "Debug CPUfreq Samsung driver core"
	depends on CPU_FREQ_S3C24XX
	help
	  Enable s3c_freq_dbg for the Samsung S3C CPUfreq core

config CPU_FREQ_S3C24XX_IODEBUG
	bool "Debug CPUfreq Samsung driver IO timing"
	depends on CPU_FREQ_S3C24XX
	help
	  Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core

2174 2175 2176 2177 2178 2179
config CPU_FREQ_S3C24XX_DEBUGFS
	bool "Export debugfs for CPUFreq"
	depends on CPU_FREQ_S3C24XX && DEBUG_FS
	help
	  Export status information via debugfs.

L
Linus Torvalds 已提交
2180 2181
endif

2182 2183 2184 2185
source "drivers/cpuidle/Kconfig"

endmenu

L
Linus Torvalds 已提交
2186 2187 2188 2189 2190 2191
menu "Floating point emulation"

comment "At least one emulation must be selected"

config FPE_NWFPE
	bool "NWFPE math emulation"
2192
	depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
L
Linus Torvalds 已提交
2193 2194 2195 2196 2197 2198 2199 2200 2201 2202 2203
	---help---
	  Say Y to include the NWFPE floating point emulator in the kernel.
	  This is necessary to run most binaries. Linux does not currently
	  support floating point hardware so you need to say Y here even if
	  your machine has an FPA or floating point co-processor podule.

	  You may say N here if you are going to load the Acorn FPEmulator
	  early in the bootup.

config FPE_NWFPE_XP
	bool "Support extended precision"
2204
	depends on FPE_NWFPE
L
Linus Torvalds 已提交
2205 2206 2207 2208 2209 2210 2211 2212 2213 2214 2215
	help
	  Say Y to include 80-bit support in the kernel floating-point
	  emulator.  Otherwise, only 32 and 64-bit support is compiled in.
	  Note that gcc does not generate 80-bit operations by default,
	  so in most cases this option only enlarges the size of the
	  floating point emulator without any good reason.

	  You almost surely want to say N here.

config FPE_FASTFPE
	bool "FastFPE math emulation (EXPERIMENTAL)"
2216
	depends on (!AEABI || OABI_COMPAT) && !CPU_32v3 && EXPERIMENTAL
L
Linus Torvalds 已提交
2217 2218 2219 2220 2221 2222 2223 2224 2225 2226 2227 2228 2229
	---help---
	  Say Y here to include the FAST floating point emulator in the kernel.
	  This is an experimental much faster emulator which now also has full
	  precision for the mantissa.  It does not support any exceptions.
	  It is very simple, and approximately 3-6 times faster than NWFPE.

	  It should be sufficient for most programs.  It may be not suitable
	  for scientific calculations, but you have to check this for yourself.
	  If you do not feel you need a faster FP emulation you should better
	  choose NWFPE.

config VFP
	bool "VFP-format floating point maths"
2230
	depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
L
Linus Torvalds 已提交
2231 2232 2233 2234 2235 2236 2237 2238 2239
	help
	  Say Y to include VFP support code in the kernel. This is needed
	  if your hardware includes a VFP unit.

	  Please see <file:Documentation/arm/VFP/release-notes.txt> for
	  release notes and additional status information.

	  Say N if your target does not have VFP hardware.

2240 2241 2242 2243 2244
config VFPv3
	bool
	depends on VFP
	default y if CPU_V7

2245 2246 2247 2248 2249 2250 2251
config NEON
	bool "Advanced SIMD (NEON) Extension support"
	depends on VFPv3 && CPU_V7
	help
	  Say Y to include support code for NEON, the ARMv7 Advanced SIMD
	  Extension.

L
Linus Torvalds 已提交
2252 2253 2254 2255 2256 2257 2258 2259
endmenu

menu "Userspace binary formats"

source "fs/Kconfig.binfmt"

config ARTHUR
	tristate "RISC OS personality"
2260
	depends on !AEABI
L
Linus Torvalds 已提交
2261 2262 2263 2264 2265 2266 2267 2268 2269 2270 2271
	help
	  Say Y here to include the kernel code necessary if you want to run
	  Acorn RISC OS/Arthur binaries under Linux. This code is still very
	  experimental; if this sounds frightening, say N and sleep in peace.
	  You can also say M here to compile this support as a module (which
	  will be called arthur).

endmenu

menu "Power management options"

R
Russell King 已提交
2272
source "kernel/power/Kconfig"
L
Linus Torvalds 已提交
2273

J
Johannes Berg 已提交
2274
config ARCH_SUSPEND_POSSIBLE
2275
	depends on !ARCH_S5PC100
2276 2277
	depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \
		CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE
J
Johannes Berg 已提交
2278 2279
	def_bool y

2280 2281 2282
config ARM_CPU_SUSPEND
	def_bool PM_SLEEP

L
Linus Torvalds 已提交
2283 2284
endmenu

2285 2286
source "net/Kconfig"

2287
source "drivers/Kconfig"
L
Linus Torvalds 已提交
2288 2289 2290 2291 2292 2293 2294 2295 2296 2297

source "fs/Kconfig"

source "arch/arm/Kconfig.debug"

source "security/Kconfig"

source "crypto/Kconfig"

source "lib/Kconfig"