提交 794d15b2 编写于 作者: S Stanislav Samsonov 提交者: Lennert Buytenhek

[ARM] add Marvell 78xx0 ARM SoC support

The Marvell Discovery Duo (MV78xx0) is a family of ARM SoCs featuring
(depending on the model) one or two Feroceon CPU cores with 512K of L2
cache and VFP coprocessors running at (depending on the model) between
800 MHz and 1.2 GHz, and features a DDR2 controller, two PCIe
interfaces that can each run either in x4 or quad x1 mode, three USB
2.0 interfaces, two 3Gb/s SATA II interfaces, a SPI interface, two
TWSI interfaces, a crypto accelerator, IDMA/XOR engines, a SPI
interface, four UARTs, and depending on the model, two or four gigabit
ethernet interfaces.

This patch adds basic support for the platform, and allows booting
on the MV78x00 development board, with functional UARTs, SATA, PCIe,
GigE and USB ports.
Signed-off-by: NStanislav Samsonov <samsonov@marvell.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
上级 a9311cfe
......@@ -388,6 +388,16 @@ config ARCH_LOKI
help
Support for the Marvell Loki (88RC8480) SoC.
config ARCH_MV78XX0
bool "Marvell MV78xx0"
select PCI
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
help
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
config ARCH_MXC
bool "Freescale MXC/iMX-based"
select ARCH_MTD_XIP
......@@ -528,6 +538,8 @@ source "arch/arm/mach-ixp23xx/Kconfig"
source "arch/arm/mach-loki/Kconfig"
source "arch/arm/mach-mv78xx0/Kconfig"
source "arch/arm/mach-pxa/Kconfig"
source "arch/arm/mach-sa1100/Kconfig"
......
......@@ -142,6 +142,7 @@ endif
machine-$(CONFIG_ARCH_ORION5X) := orion5x
machine-$(CONFIG_ARCH_MSM7X00A) := msm
machine-$(CONFIG_ARCH_LOKI) := loki
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
......
if ARCH_MV78XX0
menu "Marvell MV78xx0 Implementations"
config MACH_DB78X00_BP
bool "Marvell DB-78x00-BP Development Board"
help
Say 'Y' here if you want your kernel to support the
Marvell DB-78x00-BP Development Board.
endmenu
endif
obj-y += common.o addr-map.o irq.o pcie.o
obj-$(CONFIG_MACH_DB78X00_BP) += db78x00-bp-setup.o
zreladdr-y := 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
/*
* arch/arm/mach-mv78xx0/addr-map.c
*
* Address map functions for Marvell MV78xx0 SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mbus.h>
#include <asm/io.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_PCIE0 4
#define TARGET_PCIE1 8
#define TARGET_PCIE(i) ((i) ? TARGET_PCIE1 : TARGET_PCIE0)
#define ATTR_DEV_SPI_ROM 0x1f
#define ATTR_DEV_BOOT 0x2f
#define ATTR_DEV_CS3 0x37
#define ATTR_DEV_CS2 0x3b
#define ATTR_DEV_CS1 0x3d
#define ATTR_DEV_CS0 0x3e
#define ATTR_PCIE_IO(l) (0xf0 & ~(0x10 << (l)))
#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l)))
/*
* Helpers to get DDR bank info
*/
#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
/*
* CPU Address Decode Windows registers
*/
#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
#define WIN_CTRL_OFF 0x0000
#define WIN_BASE_OFF 0x0004
#define WIN_REMAP_LO_OFF 0x0008
#define WIN_REMAP_HI_OFF 0x000c
struct mbus_dram_target_info mv78xx0_mbus_dram_info;
static void __init __iomem *win_cfg_base(int win)
{
/*
* Find the control register base address for this window.
*
* BRIDGE_VIRT_BASE points to the right (CPU0's or CPU1's)
* MBUS bridge depending on which CPU core we're running on,
* so we don't need to take that into account here.
*/
return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
}
static int __init cpu_win_can_remap(int win)
{
if (win < 8)
return 1;
return 0;
}
static void __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
void __iomem *addr = win_cfg_base(win);
u32 ctrl;
base &= 0xffff0000;
ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
writel(base, addr + WIN_BASE_OFF);
writel(ctrl, addr + WIN_CTRL_OFF);
if (cpu_win_can_remap(win)) {
if (remap < 0)
remap = base;
writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
writel(0, addr + WIN_REMAP_HI_OFF);
}
}
void __init mv78xx0_setup_cpu_mbus(void)
{
void __iomem *addr;
int i;
int cs;
/*
* First, disable and clear windows.
*/
for (i = 0; i < 14; i++) {
addr = win_cfg_base(i);
writel(0, addr + WIN_BASE_OFF);
writel(0, addr + WIN_CTRL_OFF);
if (cpu_win_can_remap(i)) {
writel(0, addr + WIN_REMAP_LO_OFF);
writel(0, addr + WIN_REMAP_HI_OFF);
}
}
/*
* Setup MBUS dram target info.
*/
mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
if (mv78xx0_core_index() == 0)
addr = (void __iomem *)DDR_WINDOW_CPU0_BASE;
else
addr = (void __iomem *)DDR_WINDOW_CPU1_BASE;
for (i = 0, cs = 0; i < 4; i++) {
u32 base = readl(addr + DDR_BASE_CS_OFF(i));
u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
/*
* Chip select enabled?
*/
if (size & 1) {
struct mbus_dram_window *w;
w = &mv78xx0_mbus_dram_info.cs[cs++];
w->cs_index = i;
w->mbus_attr = 0xf & ~(1 << i);
w->base = base & 0xffff0000;
w->size = (size | 0x0000ffff) + 1;
}
}
mv78xx0_mbus_dram_info.num_cs = cs;
}
void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
int maj, int min)
{
setup_cpu_win(window, base, size, TARGET_PCIE(maj),
ATTR_PCIE_IO(min), -1);
}
void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
int maj, int min)
{
setup_cpu_win(window, base, size, TARGET_PCIE(maj),
ATTR_PCIE_MEM(min), -1);
}
/*
* arch/arm/mach-mv78xx0/common.c
*
* Core functions for Marvell MV78xx0 SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/arch/mv78xx0.h>
#include <asm/plat-orion/cache-feroceon-l2.h>
#include <asm/plat-orion/ehci-orion.h>
#include <asm/plat-orion/orion_nand.h>
#include <asm/plat-orion/time.h>
#include "common.h"
/*****************************************************************************
* Common bits
****************************************************************************/
int mv78xx0_core_index(void)
{
u32 extra;
/*
* Read Extra Features register.
*/
__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (extra));
return !!(extra & 0x00004000);
}
static int get_hclk(void)
{
int hclk;
/*
* HCLK tick rate is configured by DEV_D[7:5] pins.
*/
switch ((readl(SAMPLE_AT_RESET_LOW) >> 5) & 7) {
case 0:
hclk = 166666667;
break;
case 1:
hclk = 200000000;
break;
case 2:
hclk = 266666667;
break;
case 3:
hclk = 333333333;
break;
case 4:
hclk = 400000000;
break;
default:
panic("unknown HCLK PLL setting: %.8x\n",
readl(SAMPLE_AT_RESET_LOW));
}
return hclk;
}
static void get_pclk_l2clk(int hclk, int core_index, int *pclk, int *l2clk)
{
u32 cfg;
/*
* Core #0 PCLK/L2CLK is configured by bits [13:8], core #1
* PCLK/L2CLK by bits [19:14].
*/
if (core_index == 0) {
cfg = (readl(SAMPLE_AT_RESET_LOW) >> 8) & 0x3f;
} else {
cfg = (readl(SAMPLE_AT_RESET_LOW) >> 14) & 0x3f;
}
/*
* Bits [11:8] ([17:14] for core #1) configure the PCLK:HCLK
* ratio (1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6).
*/
*pclk = ((u64)hclk * (2 + (cfg & 0xf))) >> 1;
/*
* Bits [13:12] ([19:18] for core #1) configure the PCLK:L2CLK
* ratio (1, 2, 3).
*/
*l2clk = *pclk / (((cfg >> 4) & 3) + 1);
}
static int get_tclk(void)
{
int tclk;
/*
* TCLK tick rate is configured by DEV_A[2:0] strap pins.
*/
switch ((readl(SAMPLE_AT_RESET_HIGH) >> 6) & 7) {
case 1:
tclk = 166666667;
break;
case 3:
tclk = 200000000;
break;
default:
panic("unknown TCLK PLL setting: %.8x\n",
readl(SAMPLE_AT_RESET_HIGH));
}
return tclk;
}
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
static struct map_desc mv78xx0_io_desc[] __initdata = {
{
.virtual = MV78XX0_CORE_REGS_VIRT_BASE,
.pfn = 0,
.length = MV78XX0_CORE_REGS_SIZE,
.type = MT_DEVICE,
}, {
.virtual = MV78XX0_PCIE_IO_VIRT_BASE(0),
.pfn = __phys_to_pfn(MV78XX0_PCIE_IO_PHYS_BASE(0)),
.length = MV78XX0_PCIE_IO_SIZE * 8,
.type = MT_DEVICE,
}, {
.virtual = MV78XX0_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(MV78XX0_REGS_PHYS_BASE),
.length = MV78XX0_REGS_SIZE,
.type = MT_DEVICE,
},
};
void __init mv78xx0_map_io(void)
{
unsigned long phys;
/*
* Map the right set of per-core registers depending on
* which core we are running on.
*/
if (mv78xx0_core_index() == 0) {
phys = MV78XX0_CORE0_REGS_PHYS_BASE;
} else {
phys = MV78XX0_CORE1_REGS_PHYS_BASE;
}
mv78xx0_io_desc[0].pfn = __phys_to_pfn(phys);
iotable_init(mv78xx0_io_desc, ARRAY_SIZE(mv78xx0_io_desc));
}
/*****************************************************************************
* EHCI
****************************************************************************/
static struct orion_ehci_data mv78xx0_ehci_data = {
.dram = &mv78xx0_mbus_dram_info,
};
static u64 ehci_dmamask = 0xffffffffUL;
/*****************************************************************************
* EHCI0
****************************************************************************/
static struct resource mv78xx0_ehci0_resources[] = {
{
.start = USB0_PHYS_BASE,
.end = USB0_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MV78XX0_USB_0,
.end = IRQ_MV78XX0_USB_0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_ehci0 = {
.name = "orion-ehci",
.id = 0,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = 0xffffffff,
.platform_data = &mv78xx0_ehci_data,
},
.resource = mv78xx0_ehci0_resources,
.num_resources = ARRAY_SIZE(mv78xx0_ehci0_resources),
};
void __init mv78xx0_ehci0_init(void)
{
platform_device_register(&mv78xx0_ehci0);
}
/*****************************************************************************
* EHCI1
****************************************************************************/
static struct resource mv78xx0_ehci1_resources[] = {
{
.start = USB1_PHYS_BASE,
.end = USB1_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MV78XX0_USB_1,
.end = IRQ_MV78XX0_USB_1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_ehci1 = {
.name = "orion-ehci",
.id = 1,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = 0xffffffff,
.platform_data = &mv78xx0_ehci_data,
},
.resource = mv78xx0_ehci1_resources,
.num_resources = ARRAY_SIZE(mv78xx0_ehci1_resources),
};
void __init mv78xx0_ehci1_init(void)
{
platform_device_register(&mv78xx0_ehci1);
}
/*****************************************************************************
* EHCI2
****************************************************************************/
static struct resource mv78xx0_ehci2_resources[] = {
{
.start = USB2_PHYS_BASE,
.end = USB2_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MV78XX0_USB_2,
.end = IRQ_MV78XX0_USB_2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_ehci2 = {
.name = "orion-ehci",
.id = 2,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = 0xffffffff,
.platform_data = &mv78xx0_ehci_data,
},
.resource = mv78xx0_ehci2_resources,
.num_resources = ARRAY_SIZE(mv78xx0_ehci2_resources),
};
void __init mv78xx0_ehci2_init(void)
{
platform_device_register(&mv78xx0_ehci2);
}
/*****************************************************************************
* GE00
****************************************************************************/
struct mv643xx_eth_shared_platform_data mv78xx0_ge00_shared_data = {
.t_clk = 0,
.dram = &mv78xx0_mbus_dram_info,
};
static struct resource mv78xx0_ge00_shared_resources[] = {
{
.name = "ge00 base",
.start = GE00_PHYS_BASE + 0x2000,
.end = GE00_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device mv78xx0_ge00_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 0,
.dev = {
.platform_data = &mv78xx0_ge00_shared_data,
},
.num_resources = 1,
.resource = mv78xx0_ge00_shared_resources,
};
static struct resource mv78xx0_ge00_resources[] = {
{
.name = "ge00 irq",
.start = IRQ_MV78XX0_GE00_SUM,
.end = IRQ_MV78XX0_GE00_SUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_ge00 = {
.name = MV643XX_ETH_NAME,
.id = 0,
.num_resources = 1,
.resource = mv78xx0_ge00_resources,
};
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
eth_data->shared = &mv78xx0_ge00_shared;
mv78xx0_ge00.dev.platform_data = eth_data;
platform_device_register(&mv78xx0_ge00_shared);
platform_device_register(&mv78xx0_ge00);
}
/*****************************************************************************
* GE01
****************************************************************************/
struct mv643xx_eth_shared_platform_data mv78xx0_ge01_shared_data = {
.t_clk = 0,
.dram = &mv78xx0_mbus_dram_info,
};
static struct resource mv78xx0_ge01_shared_resources[] = {
{
.name = "ge01 base",
.start = GE01_PHYS_BASE + 0x2000,
.end = GE01_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device mv78xx0_ge01_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 1,
.dev = {
.platform_data = &mv78xx0_ge01_shared_data,
},
.num_resources = 1,
.resource = mv78xx0_ge01_shared_resources,
};
static struct resource mv78xx0_ge01_resources[] = {
{
.name = "ge01 irq",
.start = IRQ_MV78XX0_GE01_SUM,
.end = IRQ_MV78XX0_GE01_SUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_ge01 = {
.name = MV643XX_ETH_NAME,
.id = 1,
.num_resources = 1,
.resource = mv78xx0_ge01_resources,
};
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
eth_data->shared = &mv78xx0_ge01_shared;
eth_data->shared_smi = &mv78xx0_ge00_shared;
mv78xx0_ge01.dev.platform_data = eth_data;
platform_device_register(&mv78xx0_ge01_shared);
platform_device_register(&mv78xx0_ge01);
}
/*****************************************************************************
* GE10
****************************************************************************/
struct mv643xx_eth_shared_platform_data mv78xx0_ge10_shared_data = {
.t_clk = 0,
.dram = &mv78xx0_mbus_dram_info,
};
static struct resource mv78xx0_ge10_shared_resources[] = {
{
.name = "ge10 base",
.start = GE10_PHYS_BASE + 0x2000,
.end = GE10_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device mv78xx0_ge10_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 2,
.dev = {
.platform_data = &mv78xx0_ge10_shared_data,
},
.num_resources = 1,
.resource = mv78xx0_ge10_shared_resources,
};
static struct resource mv78xx0_ge10_resources[] = {
{
.name = "ge10 irq",
.start = IRQ_MV78XX0_GE10_SUM,
.end = IRQ_MV78XX0_GE10_SUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_ge10 = {
.name = MV643XX_ETH_NAME,
.id = 2,
.num_resources = 1,
.resource = mv78xx0_ge10_resources,
};
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
{
eth_data->shared = &mv78xx0_ge10_shared;
eth_data->shared_smi = &mv78xx0_ge00_shared;
mv78xx0_ge10.dev.platform_data = eth_data;
platform_device_register(&mv78xx0_ge10_shared);
platform_device_register(&mv78xx0_ge10);
}
/*****************************************************************************
* GE11
****************************************************************************/
struct mv643xx_eth_shared_platform_data mv78xx0_ge11_shared_data = {
.t_clk = 0,
.dram = &mv78xx0_mbus_dram_info,
};
static struct resource mv78xx0_ge11_shared_resources[] = {
{
.name = "ge11 base",
.start = GE11_PHYS_BASE + 0x2000,
.end = GE11_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device mv78xx0_ge11_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 3,
.dev = {
.platform_data = &mv78xx0_ge11_shared_data,
},
.num_resources = 1,
.resource = mv78xx0_ge11_shared_resources,
};
static struct resource mv78xx0_ge11_resources[] = {
{
.name = "ge11 irq",
.start = IRQ_MV78XX0_GE11_SUM,
.end = IRQ_MV78XX0_GE11_SUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_ge11 = {
.name = MV643XX_ETH_NAME,
.id = 3,
.num_resources = 1,
.resource = mv78xx0_ge11_resources,
};
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
{
eth_data->shared = &mv78xx0_ge11_shared;
eth_data->shared_smi = &mv78xx0_ge00_shared;
mv78xx0_ge11.dev.platform_data = eth_data;
platform_device_register(&mv78xx0_ge11_shared);
platform_device_register(&mv78xx0_ge11);
}
/*****************************************************************************
* SATA
****************************************************************************/
static struct resource mv78xx0_sata_resources[] = {
{
.name = "sata base",
.start = SATA_PHYS_BASE,
.end = SATA_PHYS_BASE + 0x5000 - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "sata irq",
.start = IRQ_MV78XX0_SATA,
.end = IRQ_MV78XX0_SATA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_sata = {
.name = "sata_mv",
.id = 0,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(mv78xx0_sata_resources),
.resource = mv78xx0_sata_resources,
};
void __init mv78xx0_sata_init(struct mv_sata_platform_data *sata_data)
{
sata_data->dram = &mv78xx0_mbus_dram_info;
mv78xx0_sata.dev.platform_data = sata_data;
platform_device_register(&mv78xx0_sata);
}
/*****************************************************************************
* UART0
****************************************************************************/
static struct plat_serial8250_port mv78xx0_uart0_data[] = {
{
.mapbase = UART0_PHYS_BASE,
.membase = (char *)UART0_VIRT_BASE,
.irq = IRQ_MV78XX0_UART_0,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource mv78xx0_uart0_resources[] = {
{
.start = UART0_PHYS_BASE,
.end = UART0_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MV78XX0_UART_0,
.end = IRQ_MV78XX0_UART_0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_uart0 = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = mv78xx0_uart0_data,
},
.resource = mv78xx0_uart0_resources,
.num_resources = ARRAY_SIZE(mv78xx0_uart0_resources),
};
void __init mv78xx0_uart0_init(void)
{
platform_device_register(&mv78xx0_uart0);
}
/*****************************************************************************
* UART1
****************************************************************************/
static struct plat_serial8250_port mv78xx0_uart1_data[] = {
{
.mapbase = UART1_PHYS_BASE,
.membase = (char *)UART1_VIRT_BASE,
.irq = IRQ_MV78XX0_UART_1,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource mv78xx0_uart1_resources[] = {
{
.start = UART1_PHYS_BASE,
.end = UART1_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MV78XX0_UART_1,
.end = IRQ_MV78XX0_UART_1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_uart1 = {
.name = "serial8250",
.id = 1,
.dev = {
.platform_data = mv78xx0_uart1_data,
},
.resource = mv78xx0_uart1_resources,
.num_resources = ARRAY_SIZE(mv78xx0_uart1_resources),
};
void __init mv78xx0_uart1_init(void)
{
platform_device_register(&mv78xx0_uart1);
}
/*****************************************************************************
* UART2
****************************************************************************/
static struct plat_serial8250_port mv78xx0_uart2_data[] = {
{
.mapbase = UART2_PHYS_BASE,
.membase = (char *)UART2_VIRT_BASE,
.irq = IRQ_MV78XX0_UART_2,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource mv78xx0_uart2_resources[] = {
{
.start = UART2_PHYS_BASE,
.end = UART2_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MV78XX0_UART_2,
.end = IRQ_MV78XX0_UART_2,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_uart2 = {
.name = "serial8250",
.id = 2,
.dev = {
.platform_data = mv78xx0_uart2_data,
},
.resource = mv78xx0_uart2_resources,
.num_resources = ARRAY_SIZE(mv78xx0_uart2_resources),
};
void __init mv78xx0_uart2_init(void)
{
platform_device_register(&mv78xx0_uart2);
}
/*****************************************************************************
* UART3
****************************************************************************/
static struct plat_serial8250_port mv78xx0_uart3_data[] = {
{
.mapbase = UART3_PHYS_BASE,
.membase = (char *)UART3_VIRT_BASE,
.irq = IRQ_MV78XX0_UART_3,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource mv78xx0_uart3_resources[] = {
{
.start = UART3_PHYS_BASE,
.end = UART3_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_MV78XX0_UART_3,
.end = IRQ_MV78XX0_UART_3,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mv78xx0_uart3 = {
.name = "serial8250",
.id = 3,
.dev = {
.platform_data = mv78xx0_uart3_data,
},
.resource = mv78xx0_uart3_resources,
.num_resources = ARRAY_SIZE(mv78xx0_uart3_resources),
};
void __init mv78xx0_uart3_init(void)
{
platform_device_register(&mv78xx0_uart3);
}
/*****************************************************************************
* Time handling
****************************************************************************/
static void mv78xx0_timer_init(void)
{
orion_time_init(IRQ_MV78XX0_TIMER_1, get_tclk());
}
struct sys_timer mv78xx0_timer = {
.init = mv78xx0_timer_init,
};
/*****************************************************************************
* General
****************************************************************************/
static int __init is_l2_writethrough(void)
{
return !!(readl(CPU_CONTROL) & L2_WRITETHROUGH);
}
void __init mv78xx0_init(void)
{
int core_index;
int hclk;
int pclk;
int l2clk;
int tclk;
core_index = mv78xx0_core_index();
hclk = get_hclk();
get_pclk_l2clk(hclk, core_index, &pclk, &l2clk);
tclk = get_tclk();
printk(KERN_INFO "MV78xx0 core #%d, ", core_index);
printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
printk("TCLK = %dMHz\n", (tclk + 499999) / 1000000);
mv78xx0_setup_cpu_mbus();
#ifdef CONFIG_CACHE_FEROCEON_L2
feroceon_l2_init(is_l2_writethrough());
#endif
mv78xx0_ge00_shared_data.t_clk = tclk;
mv78xx0_ge01_shared_data.t_clk = tclk;
mv78xx0_ge10_shared_data.t_clk = tclk;
mv78xx0_ge11_shared_data.t_clk = tclk;
mv78xx0_uart0_data[0].uartclk = tclk;
mv78xx0_uart1_data[0].uartclk = tclk;
mv78xx0_uart2_data[0].uartclk = tclk;
mv78xx0_uart3_data[0].uartclk = tclk;
}
/*
* arch/arm/mach-mv78xx0/common.h
*
* Core functions for Marvell MV78xx0 SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ARCH_MV78XX0_COMMON_H
#define __ARCH_MV78XX0_COMMON_H
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
/*
* Basic MV78xx0 init functions used early by machine-setup.
*/
int mv78xx0_core_index(void);
void mv78xx0_map_io(void);
void mv78xx0_init(void);
void mv78xx0_init_irq(void);
extern struct mbus_dram_target_info mv78xx0_mbus_dram_info;
void mv78xx0_setup_cpu_mbus(void);
void mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
int maj, int min);
void mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
int maj, int min);
void mv78xx0_ehci0_init(void);
void mv78xx0_ehci1_init(void);
void mv78xx0_ehci2_init(void);
void mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data);
void mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data);
void mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data);
void mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data);
void mv78xx0_pcie_init(int init_port0, int init_port1);
void mv78xx0_sata_init(struct mv_sata_platform_data *sata_data);
void mv78xx0_uart0_init(void);
void mv78xx0_uart1_init(void);
void mv78xx0_uart2_init(void);
void mv78xx0_uart3_init(void);
extern struct sys_timer mv78xx0_timer;
#endif
/*
* arch/arm/mach-mv78xx0/db78x00-bp-setup.c
*
* Marvell DB-78x00-BP Development Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <asm/arch/mv78xx0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
static struct mv643xx_eth_platform_data db78x00_ge00_data = {
.phy_addr = 8,
};
static struct mv643xx_eth_platform_data db78x00_ge01_data = {
.phy_addr = 9,
};
static struct mv643xx_eth_platform_data db78x00_ge10_data = {
.phy_addr = -1,
};
static struct mv643xx_eth_platform_data db78x00_ge11_data = {
.phy_addr = -1,
};
static struct mv_sata_platform_data db78x00_sata_data = {
.n_ports = 2,
};
static void __init db78x00_init(void)
{
/*
* Basic MV78xx0 setup. Needs to be called early.
*/
mv78xx0_init();
/*
* Partition on-chip peripherals between the two CPU cores.
*/
if (mv78xx0_core_index() == 0) {
mv78xx0_ehci0_init();
mv78xx0_ehci1_init();
mv78xx0_ehci2_init();
mv78xx0_ge00_init(&db78x00_ge00_data);
mv78xx0_ge01_init(&db78x00_ge01_data);
mv78xx0_ge10_init(&db78x00_ge10_data);
mv78xx0_ge11_init(&db78x00_ge11_data);
mv78xx0_sata_init(&db78x00_sata_data);
mv78xx0_uart0_init();
mv78xx0_uart2_init();
} else {
mv78xx0_uart1_init();
mv78xx0_uart3_init();
}
}
static int __init db78x00_pci_init(void)
{
if (machine_is_db78x00_bp()) {
/*
* Assign the x16 PCIe slot on the board to CPU core
* #0, and let CPU core #1 have the four x1 slots.
*/
if (mv78xx0_core_index() == 0)
mv78xx0_pcie_init(0, 1);
else
mv78xx0_pcie_init(1, 0);
}
return 0;
}
subsys_initcall(db78x00_pci_init);
MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.phys_io = MV78XX0_REGS_PHYS_BASE,
.io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = db78x00_init,
.map_io = mv78xx0_map_io,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
MACHINE_END
/*
* arch/arm/mach-mv78xx0/irq.c
*
* MV78xx0 IRQ handling.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/arch/mv78xx0.h>
#include <asm/plat-orion/irq.h>
#include "common.h"
void __init mv78xx0_init_irq(void)
{
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
}
/*
* arch/arm/mach-mv78xx0/pcie.c
*
* PCIe functions for Marvell MV78xx0 SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/mbus.h>
#include <asm/mach/pci.h>
#include <asm/plat-orion/pcie.h>
#include "common.h"
struct pcie_port {
u8 maj;
u8 min;
u8 root_bus_nr;
void __iomem *base;
spinlock_t conf_lock;
char io_space_name[16];
char mem_space_name[16];
struct resource res[2];
};
static struct pcie_port pcie_port[8];
static int num_pcie_ports;
static struct resource pcie_io_space;
static struct resource pcie_mem_space;
static void __init mv78xx0_pcie_preinit(void)
{
int i;
u32 size_each;
u32 start;
int win;
pcie_io_space.name = "PCIe I/O Space";
pcie_io_space.start = MV78XX0_PCIE_IO_PHYS_BASE(0);
pcie_io_space.end =
MV78XX0_PCIE_IO_PHYS_BASE(0) + MV78XX0_PCIE_IO_SIZE * 8 - 1;
pcie_io_space.flags = IORESOURCE_IO;
if (request_resource(&iomem_resource, &pcie_io_space))
panic("can't allocate PCIe I/O space");
pcie_mem_space.name = "PCIe MEM Space";
pcie_mem_space.start = MV78XX0_PCIE_MEM_PHYS_BASE;
pcie_mem_space.end =
MV78XX0_PCIE_MEM_PHYS_BASE + MV78XX0_PCIE_MEM_SIZE - 1;
pcie_mem_space.flags = IORESOURCE_MEM;
if (request_resource(&iomem_resource, &pcie_mem_space))
panic("can't allocate PCIe MEM space");
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
snprintf(pp->io_space_name, sizeof(pp->io_space_name),
"PCIe %d.%d I/O", pp->maj, pp->min);
pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
pp->res[0].name = pp->io_space_name;
pp->res[0].start = MV78XX0_PCIE_IO_PHYS_BASE(i);
pp->res[0].end = pp->res[0].start + MV78XX0_PCIE_IO_SIZE - 1;
pp->res[0].flags = IORESOURCE_IO;
snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
"PCIe %d.%d MEM", pp->maj, pp->min);
pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
pp->res[1].name = pp->mem_space_name;
pp->res[1].flags = IORESOURCE_MEM;
}
switch (num_pcie_ports) {
case 0:
size_each = 0;
break;
case 1:
size_each = 0x30000000;
break;
case 2 ... 3:
size_each = 0x10000000;
break;
case 4 ... 6:
size_each = 0x08000000;
break;
case 7:
size_each = 0x04000000;
break;
default:
panic("invalid number of PCIe ports");
}
start = MV78XX0_PCIE_MEM_PHYS_BASE;
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
pp->res[1].start = start;
pp->res[1].end = start + size_each - 1;
start += size_each;
}
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
if (request_resource(&pcie_io_space, &pp->res[0]))
panic("can't allocate PCIe I/O sub-space");
if (request_resource(&pcie_mem_space, &pp->res[1]))
panic("can't allocate PCIe MEM sub-space");
}
win = 0;
for (i = 0; i < num_pcie_ports; i++) {
struct pcie_port *pp = pcie_port + i;
mv78xx0_setup_pcie_io_win(win++, pp->res[0].start,
pp->res[0].end - pp->res[0].start + 1,
pp->maj, pp->min);
mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start,
pp->res[1].end - pp->res[1].start + 1,
pp->maj, pp->min);
}
}
static int __init mv78xx0_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct pcie_port *pp;
if (nr >= num_pcie_ports)
return 0;
pp = &pcie_port[nr];
pp->root_bus_nr = sys->busnr;
/*
* Generic PCIe unit setup.
*/
orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
orion_pcie_setup(pp->base, &mv78xx0_mbus_dram_info);
sys->resource[0] = &pp->res[0];
sys->resource[1] = &pp->res[1];
sys->resource[2] = NULL;
return 1;
}
static struct pcie_port *bus_to_port(int bus)
{
int i;
for (i = num_pcie_ports - 1; i >= 0; i--) {
int rbus = pcie_port[i].root_bus_nr;
if (rbus != -1 && rbus <= bus)
break;
}
return i >= 0 ? pcie_port + i : NULL;
}
static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
{
/*
* Don't go out when trying to access nonexisting devices
* on the local bus.
*/
if (bus == pp->root_bus_nr && dev > 1)
return 0;
return 1;
}
static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct pcie_port *pp = bus_to_port(bus->number);
unsigned long flags;
int ret;
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
struct pcie_port *pp = bus_to_port(bus->number);
unsigned long flags;
int ret;
if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
spin_lock_irqsave(&pp->conf_lock, flags);
ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
spin_unlock_irqrestore(&pp->conf_lock, flags);
return ret;
}
static struct pci_ops pcie_ops = {
.read = pcie_rd_conf,
.write = pcie_wr_conf,
};
static void __devinit rc_pci_fixup(struct pci_dev *dev)
{
/*
* Prevent enumeration of root complex.
*/
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
dev->resource[i].start = 0;
dev->resource[i].end = 0;
dev->resource[i].flags = 0;
}
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
static struct pci_bus __init *
mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys)
{
struct pci_bus *bus;
if (nr < num_pcie_ports) {
bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
} else {
bus = NULL;
BUG();
}
return bus;
}
static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
struct pcie_port *pp = bus_to_port(dev->bus->number);
return IRQ_MV78XX0_PCIE_00 + (pp->maj << 2) + pp->min;
}
static struct hw_pci mv78xx0_pci __initdata = {
.nr_controllers = 8,
.preinit = mv78xx0_pcie_preinit,
.swizzle = pci_std_swizzle,
.setup = mv78xx0_pcie_setup,
.scan = mv78xx0_pcie_scan_bus,
.map_irq = mv78xx0_pcie_map_irq,
};
static void __init add_pcie_port(int maj, int min, unsigned long base)
{
printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
if (orion_pcie_link_up((void __iomem *)base)) {
struct pcie_port *pp = &pcie_port[num_pcie_ports++];
printk("link up\n");
pp->maj = maj;
pp->min = min;
pp->root_bus_nr = -1;
pp->base = (void __iomem *)base;
spin_lock_init(&pp->conf_lock);
memset(pp->res, 0, sizeof(pp->res));
} else {
printk("link down, ignoring\n");
}
}
void __init mv78xx0_pcie_init(int init_port0, int init_port1)
{
if (init_port0) {
add_pcie_port(0, 0, PCIE00_VIRT_BASE);
if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) {
add_pcie_port(0, 1, PCIE01_VIRT_BASE);
add_pcie_port(0, 2, PCIE02_VIRT_BASE);
add_pcie_port(0, 3, PCIE03_VIRT_BASE);
}
}
if (init_port1) {
add_pcie_port(1, 0, PCIE10_VIRT_BASE);
if (!orion_pcie_x4_mode((void __iomem *)PCIE10_VIRT_BASE)) {
add_pcie_port(1, 1, PCIE11_VIRT_BASE);
add_pcie_port(1, 2, PCIE12_VIRT_BASE);
add_pcie_port(1, 3, PCIE13_VIRT_BASE);
}
}
pci_common_init(&mv78xx0_pci);
}
......@@ -365,7 +365,7 @@ config CPU_XSC3
# Feroceon
config CPU_FEROCEON
bool
depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD
depends on ARCH_ORION5X || ARCH_LOKI || ARCH_KIRKWOOD || ARCH_MV78XX0
default y
select CPU_32v5
select CPU_ABRT_EV5T
......@@ -716,7 +716,7 @@ config OUTER_CACHE
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
depends on ARCH_KIRKWOOD
depends on ARCH_KIRKWOOD || ARCH_MV78XX0
default y
select OUTER_CACHE
help
......
/*
* include/asm-arm/arch-mv78xx0/debug-macro.S
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <asm/arch/mv78xx0.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
ldreq \rx, =MV78XX0_REGS_PHYS_BASE
ldrne \rx, =MV78XX0_REGS_VIRT_BASE
orr \rx, \rx, #0x00012000
.endm
#define UART_SHIFT 2
#include <asm/hardware/debug-8250.S>
/*
* include/asm-arm/arch-mv78xx0/entry-macro.S
*
* Low-level IRQ helper macros for Marvell MV78xx0 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/arch/mv78xx0.h>
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =IRQ_VIRT_BASE
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
@ check low interrupts
ldr \irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
ldr \tmp, [\base, #IRQ_MASK_LOW_OFF]
mov \irqnr, #31
ands \irqstat, \irqstat, \tmp
@ if no low interrupts set, check high interrupts
ldreq \irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
ldreq \tmp, [\base, #IRQ_MASK_HIGH_OFF]
moveq \irqnr, #63
andeqs \irqstat, \irqstat, \tmp
@ find first active interrupt source
clzne \irqstat, \irqstat
subne \irqnr, \irqnr, \irqstat
.endm
/*
* include/asm-arm/arch-mv78xx0/hardware.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include "mv78xx0.h"
#define pcibios_assign_all_busses() 1
#define PCIBIOS_MIN_IO 0x00001000
#define PCIBIOS_MIN_MEM 0x01000000
#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */
#endif
/*
* include/asm-arm/arch-mv78xx0/io.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
#include "mv78xx0.h"
#define IO_SPACE_LIMIT 0xffffffff
static inline void __iomem *__io(unsigned long addr)
{
return (void __iomem *)((addr - MV78XX0_PCIE_IO_PHYS_BASE(0))
+ MV78XX0_PCIE_IO_VIRT_BASE(0));
}
#define __io(a) __io(a)
#define __mem_pci(a) (a)
#endif
/*
* include/asm-arm/arch-mv78xx0/irqs.h
*
* IRQ definitions for Marvell MV78xx0 SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#include "mv78xx0.h" /* need GPIO_MAX */
/*
* MV78xx0 Low Interrupt Controller
*/
#define IRQ_MV78XX0_ERR 0
#define IRQ_MV78XX0_SPI 1
#define IRQ_MV78XX0_I2C_0 2
#define IRQ_MV78XX0_I2C_1 3
#define IRQ_MV78XX0_IDMA_0 4
#define IRQ_MV78XX0_IDMA_1 5
#define IRQ_MV78XX0_IDMA_2 6
#define IRQ_MV78XX0_IDMA_3 7
#define IRQ_MV78XX0_TIMER_0 8
#define IRQ_MV78XX0_TIMER_1 9
#define IRQ_MV78XX0_TIMER_2 10
#define IRQ_MV78XX0_TIMER_3 11
#define IRQ_MV78XX0_UART_0 12
#define IRQ_MV78XX0_UART_1 13
#define IRQ_MV78XX0_UART_2 14
#define IRQ_MV78XX0_UART_3 15
#define IRQ_MV78XX0_USB_0 16
#define IRQ_MV78XX0_USB_1 17
#define IRQ_MV78XX0_USB_2 18
#define IRQ_MV78XX0_CRYPTO 19
#define IRQ_MV78XX0_SDIO_0 20
#define IRQ_MV78XX0_SDIO_1 21
#define IRQ_MV78XX0_XOR_0 22
#define IRQ_MV78XX0_XOR_1 23
#define IRQ_MV78XX0_I2S_0 24
#define IRQ_MV78XX0_I2S_1 25
#define IRQ_MV78XX0_SATA 26
#define IRQ_MV78XX0_TDMI 27
/*
* MV78xx0 High Interrupt Controller
*/
#define IRQ_MV78XX0_PCIE_00 32
#define IRQ_MV78XX0_PCIE_01 33
#define IRQ_MV78XX0_PCIE_02 34
#define IRQ_MV78XX0_PCIE_03 35
#define IRQ_MV78XX0_PCIE_10 36
#define IRQ_MV78XX0_PCIE_11 37
#define IRQ_MV78XX0_PCIE_12 38
#define IRQ_MV78XX0_PCIE_13 39
#define IRQ_MV78XX0_GE00_SUM 40
#define IRQ_MV78XX0_GE00_RX 41
#define IRQ_MV78XX0_GE00_TX 42
#define IRQ_MV78XX0_GE00_MISC 43
#define IRQ_MV78XX0_GE01_SUM 44
#define IRQ_MV78XX0_GE01_RX 45
#define IRQ_MV78XX0_GE01_TX 46
#define IRQ_MV78XX0_GE01_MISC 47
#define IRQ_MV78XX0_GE10_SUM 48
#define IRQ_MV78XX0_GE10_RX 49
#define IRQ_MV78XX0_GE10_TX 50
#define IRQ_MV78XX0_GE10_MISC 51
#define IRQ_MV78XX0_GE11_SUM 52
#define IRQ_MV78XX0_GE11_RX 53
#define IRQ_MV78XX0_GE11_TX 54
#define IRQ_MV78XX0_GE11_MISC 55
#define IRQ_MV78XX0_GPIO_0_7 56
#define IRQ_MV78XX0_GPIO_8_15 57
#define IRQ_MV78XX0_GPIO_16_23 58
#define IRQ_MV78XX0_GPIO_24_31 59
#define IRQ_MV78XX0_DB_IN 60
#define IRQ_MV78XX0_DB_OUT 61
/*
* MV78XX0 General Purpose Pins
*/
#define IRQ_MV78XX0_GPIO_START 64
#define NR_GPIO_IRQS GPIO_MAX
#define NR_IRQS (IRQ_MV78XX0_GPIO_START + NR_GPIO_IRQS)
#endif
/*
* include/asm-arm/arch-mv78xx0/memory.h
*/
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
#define PHYS_OFFSET UL(0x00000000)
#define __virt_to_bus(x) __virt_to_phys(x)
#define __bus_to_virt(x) __phys_to_virt(x)
#endif
/*
* include/asm-arm/arch-mv78xx0/mv78xx0.h
*
* Generic definitions for Marvell MV78xx0 SoC flavors:
* MV781x0 and MV782x0.
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_MV78XX0_H
#define __ASM_ARCH_MV78XX0_H
/*
* Marvell MV78xx0 address maps.
*
* phys
* c0000000 PCIe Memory space
* f0800000 PCIe #0 I/O space
* f0900000 PCIe #1 I/O space
* f0a00000 PCIe #2 I/O space
* f0b00000 PCIe #3 I/O space
* f0c00000 PCIe #4 I/O space
* f0d00000 PCIe #5 I/O space
* f0e00000 PCIe #6 I/O space
* f0f00000 PCIe #7 I/O space
* f1000000 on-chip peripheral registers
*
* virt phys size
* fe400000 f102x000 16K core-specific peripheral registers
* fe700000 f0800000 1M PCIe #0 I/O space
* fe800000 f0900000 1M PCIe #1 I/O space
* fe900000 f0a00000 1M PCIe #2 I/O space
* fea00000 f0b00000 1M PCIe #3 I/O space
* feb00000 f0c00000 1M PCIe #4 I/O space
* fec00000 f0d00000 1M PCIe #5 I/O space
* fed00000 f0e00000 1M PCIe #6 I/O space
* fee00000 f0f00000 1M PCIe #7 I/O space
* fef00000 f1000000 1M on-chip peripheral registers
*/
#define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000
#define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000
#define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000
#define MV78XX0_CORE_REGS_SIZE SZ_16K
#define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20))
#define MV78XX0_PCIE_IO_VIRT_BASE(i) (0xfe700000 + ((i) << 20))
#define MV78XX0_PCIE_IO_SIZE SZ_1M
#define MV78XX0_REGS_PHYS_BASE 0xf1000000
#define MV78XX0_REGS_VIRT_BASE 0xfef00000
#define MV78XX0_REGS_SIZE SZ_1M
#define MV78XX0_PCIE_MEM_PHYS_BASE 0xc0000000
#define MV78XX0_PCIE_MEM_SIZE 0x30000000
/*
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
#define L2_WRITETHROUGH 0x00020000
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define BRIDGE_INT_TIMER1_CLR (~0x0004)
#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
#define IRQ_CAUSE_LOW_OFF 0x0004
#define IRQ_CAUSE_HIGH_OFF 0x0008
#define IRQ_MASK_LOW_OFF 0x0010
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
/*
* Register Map
*/
#define DDR_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x00000)
#define DDR_WINDOW_CPU0_BASE (DDR_VIRT_BASE | 0x1500)
#define DDR_WINDOW_CPU1_BASE (DDR_VIRT_BASE | 0x1700)
#define DEV_BUS_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x10000)
#define DEV_BUS_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x10000)
#define SAMPLE_AT_RESET_LOW (DEV_BUS_VIRT_BASE | 0x0030)
#define SAMPLE_AT_RESET_HIGH (DEV_BUS_VIRT_BASE | 0x0034)
#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000)
#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000)
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define UART2_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2200)
#define UART2_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2200)
#define UART3_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2300)
#define UART3_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2300)
#define GE10_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x30000)
#define GE11_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x34000)
#define PCIE00_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x40000)
#define PCIE01_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x44000)
#define PCIE02_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x48000)
#define PCIE03_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x4c000)
#define USB0_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x50000)
#define USB1_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x51000)
#define USB2_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x52000)
#define GE00_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x70000)
#define GE01_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0x74000)
#define PCIE10_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x80000)
#define PCIE11_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x84000)
#define PCIE12_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x88000)
#define PCIE13_VIRT_BASE (MV78XX0_REGS_VIRT_BASE | 0x8c000)
#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
#define GPIO_MAX 32
#endif
/*
* include/asm-arm/arch-mv78xx0/system.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
#include <asm/arch/hardware.h>
#include <asm/arch/mv78xx0.h>
static inline void arch_idle(void)
{
cpu_do_idle();
}
static inline void arch_reset(char mode)
{
/*
* Enable soft reset to assert RSTOUTn.
*/
writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
/*
* Assert soft reset.
*/
writel(SOFT_RESET, SYSTEM_SOFT_RESET);
while (1)
;
}
#endif
/*
* include/asm-arm/arch-mv78xx0/timex.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define CLOCK_TICK_RATE (100 * HZ)
/*
* include/asm-arm/arch-mv78xx0/uncompress.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/serial_reg.h>
#include <asm/arch/mv78xx0.h>
#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE)
static void putc(const char c)
{
unsigned char *base = SERIAL_BASE;
int i;
for (i = 0; i < 0x1000; i++) {
if (base[UART_LSR << 2] & UART_LSR_THRE)
break;
barrier();
}
base[UART_TX << 2] = c;
}
static void flush(void)
{
unsigned char *base = SERIAL_BASE;
unsigned char mask;
int i;
mask = UART_LSR_TEMT | UART_LSR_THRE;
for (i = 0; i < 0x1000; i++) {
if ((base[UART_LSR << 2] & mask) == mask)
break;
barrier();
}
}
/*
* nothing to do
*/
#define arch_decomp_setup()
#define arch_decomp_wdog()
/*
* include/asm-arm/arch-mv78xx0/vmalloc.h
*/
#define VMALLOC_END 0xfe000000
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册