提交 3f22ab27 编写于 作者: D Dave Hansen 提交者: Linus Torvalds

[PATCH] make each arch use mm/Kconfig

For all architectures, this just means that you'll see a "Memory Model"
choice in your architecture menu.  For those that implement DISCONTIGMEM,
you may eventually want to make your ARCH_DISCONTIGMEM_ENABLE a "def_bool
y" and make your users select DISCONTIGMEM right out of the new choice
menu.  The only disadvantage might be if you have some specific things that
you need in your help option to explain something about DISCONTIGMEM.
Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 3a9da765
......@@ -509,7 +509,7 @@ config NR_CPUS
depends on SMP
default "64"
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous Memory Support (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
......@@ -518,6 +518,8 @@ config DISCONTIGMEM
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
source "mm/Kconfig"
config NUMA
bool "NUMA Support (EXPERIMENTAL)"
depends on DISCONTIGMEM
......
......@@ -346,7 +346,7 @@ config PREEMPT
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool
default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
help
......@@ -355,6 +355,8 @@ config DISCONTIGMEM
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
source "mm/Kconfig"
config LEDS
bool "Timer and CPU usage LEDs"
depends on ARCH_CDB89712 || ARCH_CO285 || ARCH_EBSA110 || \
......
......@@ -179,6 +179,8 @@ config CMDLINE
time by entering them here. As a minimum, you should specify the
memory size and the root device (e.g., mem=64M root=/dev/nfs).
source "mm/Kconfig"
endmenu
source "drivers/base/Kconfig"
......
......@@ -74,6 +74,8 @@ config PREEMPT
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
source mm/Kconfig
endmenu
menu "Hardware setup"
......
......@@ -74,6 +74,8 @@ config HIGHPTE
with a lot of RAM, this can be wasteful of precious low memory.
Setting this option will put user-space page tables in high memory.
source "mm/Kconfig"
choice
prompt "uClinux kernel load address"
depends on !MMU
......
......@@ -180,4 +180,7 @@ config CPU_H8S
config PREEMPT
bool "Preemptible Kernel"
default n
source "mm/Kconfig"
endmenu
......@@ -783,7 +783,7 @@ comment "NUMA (NUMA-Q) requires SMP, 64GB highmem support"
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
depends on X86_SUMMIT && (!HIGHMEM64G || !ACPI)
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool
depends on NUMA
default y
......@@ -808,6 +808,8 @@ config HAVE_ARCH_ALLOC_REMAP
depends on NUMA
default y
source "mm/Kconfig"
config HIGHPTE
bool "Allocate 3rd-level pagetables from highmem"
depends on HIGHMEM4G || HIGHMEM64G
......
......@@ -197,7 +197,7 @@ config HOLES_IN_ZONE
bool
default y if VIRTUAL_MEM_MAP
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous memory support"
depends on (IA64_DIG || IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB) && NUMA && VIRTUAL_MEM_MAP
default y if (IA64_SGI_SN2 || IA64_GENERIC) && NUMA
......@@ -300,6 +300,8 @@ config PREEMPT
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
source "mm/Kconfig"
config HAVE_DEC_LOCK
bool
depends on (SMP || PREEMPT)
......
......@@ -172,11 +172,13 @@ config NOHIGHMEM
bool
default y
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool "Internal RAM Support"
depends on CHIP_M32700 || CHIP_M32102 || CHIP_VDEC2 || CHIP_OPSP
default y
source "mm/Kconfig"
config IRAM_START
hex "Internal memory start address (hex)"
default "00f00000"
......
......@@ -357,6 +357,8 @@ config 060_WRITETHROUGH
is hardwired on. The 53c710 SCSI driver is known to suffer from
this problem.
source "mm/Kconfig"
endmenu
menu "General setup"
......
......@@ -532,6 +532,8 @@ config ROMKERNEL
endchoice
source "mm/Kconfig"
endmenu
config ISA_DMA_API
......
......@@ -492,7 +492,7 @@ config SGI_SN0_N_MODE
which allows for more memory. Your system is most probably
running in M-Mode, so you should say N here.
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool
default y if SGI_IP27
help
......@@ -501,6 +501,10 @@ config DISCONTIGMEM
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
config ARCH_FLATMEM_DISABLE
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
config NUMA
bool "NUMA Support"
depends on SGI_IP27
......
......@@ -148,7 +148,7 @@ config HOTPLUG_CPU
default y if SMP
select HOTPLUG
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous memory support (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
......@@ -157,6 +157,12 @@ config DISCONTIGMEM
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
config ARCH_FLATMEM_DISABLE
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
source "mm/Kconfig"
config PREEMPT
bool
# bool "Preemptible Kernel"
......
......@@ -905,6 +905,8 @@ config PREEMPT
config HIGHMEM
bool "High memory support"
source "mm/Kconfig"
source "fs/Kconfig.binfmt"
config PROC_DEVICETREE
......
......@@ -198,10 +198,12 @@ config HMT
This option enables hardware multithreading on RS64 cpus.
pSeries systems p620 and p660 have such a cpu type.
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous Memory Support"
depends on SMP && PPC_PSERIES
source "mm/Kconfig"
config NUMA
bool "NUMA support"
depends on DISCONTIGMEM
......
......@@ -226,6 +226,8 @@ config WARN_STACK_SIZE
This allows you to specify the maximum frame size a function may
have without the compiler complaining about it.
source "mm/Kconfig"
comment "I/O subsystem configuration"
config MACHCHK_WARNING
......
......@@ -486,7 +486,7 @@ config CPU_SUBTYPE_ST40
depends on CPU_SUBTYPE_ST40STB1 || CPU_SUBTYPE_ST40GX1
default y
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool
depends on SH_HP690
default y
......@@ -496,6 +496,12 @@ config DISCONTIGMEM
or have huge holes in the physical address space for other reasons.
See <file:Documentation/vm/numa> for more.
config ARCH_FLATMEM_DISABLE
def_bool y
depends on ARCH_DISCONTIGMEM_ENABLE
source "mm/Kconfig"
config ZERO_PAGE_OFFSET
hex "Zero page offset"
default "0x00001000" if !(SH_MPC1211 || SH_SH03)
......
......@@ -217,6 +217,8 @@ config PREEMPT
bool "Preemptible Kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL
source "mm/Kconfig"
endmenu
menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
......
......@@ -291,6 +291,8 @@ config PRINTER
If you have more than 8 printers, you need to increase the LP_NO
macro in lp.c and the PARPORT_MAX macro in parport.h.
source "mm/Kconfig"
endmenu
source "drivers/base/Kconfig"
......
......@@ -484,6 +484,8 @@ config CMDLINE
NOTE: This option WILL override the PROM bootargs setting!
source "mm/Kconfig"
endmenu
source "drivers/base/Kconfig"
......
......@@ -74,6 +74,7 @@ config MODE_SKAS
option will shrink the UML binary slightly.
source "arch/um/Kconfig_arch"
source "mm/Kconfig"
config LD_SCRIPT_STATIC
bool
......
......@@ -218,6 +218,8 @@ menu "Processor type and features"
a lot of RAM, and you need to able to allocate very large
contiguous chunks. If unsure, say N.
source "mm/Kconfig"
endmenu
......
......@@ -265,7 +265,7 @@ config NUMA_EMU
into virtual nodes when booted with "numa=fake=N", where N is the
number of nodes. This is only useful for debugging.
config DISCONTIGMEM
config ARCH_DISCONTIGMEM_ENABLE
bool
depends on NUMA
default y
......@@ -274,6 +274,8 @@ config NUMA
bool
default n
source "mm/Kconfig"
config HAVE_DEC_LOCK
bool
depends on SMP
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册