layers.py

# Copyright (c) 2018 PaddlePaddle Authors. All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

import collections
import copy
import inspect
import re
import warnings
import weakref

import numpy as np

import paddle
from paddle import profiler
from paddle.fluid import core, framework, unique_name
from paddle.fluid.core import VarDesc
from paddle.fluid.dygraph import no_grad
from paddle.fluid.dygraph.base import (
    _convert_into_variable,
    in_declarative_mode,
    program_desc_tracing_guard,
)
from paddle.fluid.dygraph_utils import _append_activation_in_dygraph
from paddle.fluid.executor import Executor, global_scope
from paddle.fluid.framework import Parameter, Program
from paddle.fluid.framework import _current_expected_place as _get_device
from paddle.fluid.framework import (
    _global_flags,
    convert_np_dtype_to_dtype_,
    default_main_program,
    in_dygraph_mode,
)
from paddle.fluid.layer_helper_base import LayerHelperBase
from paddle.fluid.param_attr import ParamAttr
from paddle.profiler.utils import in_profiler_mode
from paddle.utils import deprecated

__all__ = []

_first_cap_re = re.compile('(.)([A-Z][a-z]+)')
_all_cap_re = re.compile('([a-z])([A-Z])')


def record_program_ops_pre_hook(layer, inputs):
    """
    A pre-hook to mark op numbers before enter layer.forward.
    """
    if not in_dygraph_mode():
        if layer._op_recorder.start < 0:
            layer._op_recorder.start = len(
                default_main_program().current_block().ops
            )
            layer._op_recorder.is_valid = True
        else:
            layer._op_recorder.is_valid = False
            warnings.warn(
                "{} has recorded the op information before. Please check whether you call this layer twice.".format(
                    layer._full_name
                )
            )

    return None


def set_op_customized_attrs_post_hook(layer, inputs, outputs):
    """
    A post-hook to append customized attributes into all operators generated in current layer.
    """
    if not in_dygraph_mode() and layer._op_recorder.is_valid:

        start = layer._op_recorder.start
        end = len(default_main_program().current_block().ops)
        assert start >= 0 and end >= start
        ops = default_main_program().current_block().ops[start:end]

        layer._op_recorder.end = end
        layer._op_recorder.ops = ops

        for op in ops:
            for attr_name, val in layer._customized_attrs.items():
                op._set_attr(attr_name, val)

        # remove pre-hook and post-hook
        for hook_helper in layer._op_recorder.hooks:
            hook_helper.remove()

    return None


def _scope_dist2single(dist_scope):
    mapping = {
        "row_parallel_linear": "linear",
        "column_parallel_linear": "linear",
        "vocab_parallel_embedding": "embedding",
        # "parallel_cross_entropy": "cross_entropy", while mp_layer has parallel_cross_entropy,
        # but there is no parameters so the mapping of parallel_cross_entropy is not necessary.
    }
    return mapping.get(dist_scope, dist_scope)


def _convert_camel_to_snake(name):
    s1 = _first_cap_re.sub(r'\1_\2', name)
    return _all_cap_re.sub(r'\1_\2', s1).lower()


def _addindent(string, indent):
    s1 = string.split('\n')
    if len(s1) == 1:
        return string
    s2 = []
    for idx, line in enumerate(s1):
        if idx > 0:
            s2.append(str((indent * ' ') + line))
    return s1[0] + '\n' + '\n'.join(s2)


class LayerObjectHelper(LayerHelperBase):
    def __init__(self, name):
        super().__init__(name, layer_type=name)

    def append_op(
        self,
        type=None,
        inputs=None,
        outputs=None,
        attrs=None,
        stop_gradient=None,
    ):
        """append an operator for this layer object.

           Args:
               type: operator type
               inputs: input variable of the operator
               dtype: data type of this parameter
               is_bias: if this is a bias parameter
               default_initializer: set the default initializer for this parameter

        Returns created parameter Variable.
        """
        return self.main_program.current_block().append_op(
            type=type,
            inputs=inputs,
            outputs=outputs,
            attrs=attrs,
            stop_gradient=stop_gradient,
        )

    def _multiple_input(self, inputs_in):
        inputs = inputs_in
        ret = []
        if isinstance(inputs, (list, tuple)):
            for inp in inputs:
                ret.append(self.to_variable(inp))
        else:
            ret.append(self.to_variable(inputs))
        return ret

    # TODO: make it public when we need it
    def _input(self, inputs_in):
        inputs = self._multiple_input(inputs_in)
        if len(inputs) != 1:
            raise f"{self.layer_type} layer only takes one input in"
        return inputs[0]

    def _multiple_param_attr(self, length, param_attr_in=None):
        param_attr = param_attr_in
        if isinstance(param_attr, ParamAttr):
            param_attr = [param_attr]

        if len(param_attr) != 1 and len(param_attr) != length:
            raise ValueError(f"parameter number mismatch in {self.name}")
        elif len(param_attr) == 1 and length != 1:
            tmp = [None] * length
            for i in range(length):
                tmp[i] = copy.deepcopy(param_attr[0])
            param_attr = tmp
        return param_attr

    def iter_inputs_and_params(self, inputs_in, param_attr_in=None):
        """Access all inputs and params one by one

           Args:
               inputs_in: inputs to be iter
               param_attr_in: param_attr to be iter

        Returns input, param_attr
        """
        param_attr_in = ParamAttr._to_attr(param_attr_in)
        if isinstance(param_attr_in, bool):
            raise ValueError(f'Param_attr should not be False in {self.name}')
        inputs = inputs_in if (inputs_in is not None) else []
        inputs = self._multiple_input(inputs)
        param_attrs = self._multiple_param_attr(len(inputs), param_attr_in)
        yield from zip(inputs, param_attrs)

    def input_dtype(self, inputs_in):
        """Get input data type

           Args:
               inputs_in: inputs wanted know the data type

        Returns dtype of the input
        """
        inputs_in = inputs_in if (inputs_in is not None) else []
        inputs = self._multiple_input(inputs_in)
        dtype = None
        for each in inputs:
            if dtype is None:
                dtype = each.dtype
            elif dtype != each.dtype:
                raise ValueError(
                    "Data Type mismatch: %d to %d in %s"
                    % (dtype, each.dtype, self.name)
                )
        return dtype

    def get_parameter(self, name):
        """Get parameter specifically

           Args:
               name: parameter's name

        Returns target parameter
        """
        param = self.main_program.global_block().var(name)
        if not isinstance(param, Parameter):
            raise ValueError(f"no Parameter name {name} found in {self.name}")
        return param

    # TODO: this should not be called anymore after all activation func move to Layers
    def append_activation(self, input_var, act=None, use_cudnn=None):
        """Append activation

            Args:
                input_var: the input variable. The len(input_var.shape) is
                larger or equal than 2.
                act: activation type
                use_cudnn: if use cudnn

        Return the Variable of after append activation
        """
        act = act
        if act is None:
            return input_var
        if isinstance(act, str):
            act = {'type': act}
        else:
            raise TypeError(
                str(act) + " should be unicode or str in %s ", self.name
            )

        if (use_cudnn is not None) and use_cudnn:
            act['use_cudnn'] = use_cudnn
        use_mkldnn = _global_flags()["FLAGS_use_mkldnn"]
        if (use_mkldnn is not None) and use_mkldnn:
            act['use_mkldnn'] = use_mkldnn
        act_type = act.pop('type')
        if in_dygraph_mode():
            res = _append_activation_in_dygraph(
                input_var, act_type, use_cudnn, use_mkldnn
            )
            return res
        else:
            tmp = self.create_variable_for_type_inference(dtype=input_var.dtype)
            self.append_op(
                type=act_type,
                inputs={"X": [input_var]},
                outputs={"Out": [tmp]},
                attrs=act,
            )
            return tmp

    def is_instance(self, param, cls):
        """Check if the input parameter is instance of input class

            Args:
                param: parameter to be check
                cls: class of the parameter

        Return result of the check (True or False)
        """
        param = param
        if not isinstance(param, cls):
            raise TypeError(
                "The input {0} parameter of method {1} must be {2}, in layer {3}",
                param,
                self.layer_type,
                cls.__name__,
                self.name,
            )


class LayerOpsRecoder:
    """
    Record generated operators information in nn.Layer.
    """

    def __init__(self, start=-1, end=-1, ops=None, is_valid=False, hooks=None):
        self.start = start
        self.end = end
        self.ops = ops
        self.is_valid = is_valid
        self.hooks = hooks


class HookRemoveHelper:
    """A HookRemoveHelper that can be used to remove hook."""

    next_hook_id = 0

    def __init__(self, hooks):
        self._hooks_ref = weakref.ref(hooks)
        self._hook_id = HookRemoveHelper.next_hook_id
        HookRemoveHelper.next_hook_id += 1

    def remove(self):
        hooks = self._hooks_ref()
        if hooks is not None and self._hook_id in hooks:
            del hooks[self._hook_id]


class Layer:
    """
    Dynamic graph Layer based on OOD, includes the parameters of the layer, the structure of the forward graph and so on.

    Parameters:
        name_scope (str, optional): prefix name used by the layer to name parameters.
            If prefix is "my_layer", parameter name in MyLayer
            can be "my_layer_0.w_n", where "w" is the parameter
            base name and "n" is an unique suffix auto-generated.
            If None, prefix name will be snake cased class name. Default: None.
        dtype(str, optional): data type of this parameter.
                If set str, it can be "bool",  "float16", "float32", "float64",
                "int8", "int16", "int32", "int64", "uint8" or "uint16".
                Default: "float32"

    Returns:
        None

    Examples:
        .. code-block:: python

            import paddle
            class MyLayer(paddle.nn.Layer):
                def __init__(self):
                    super().__init__()
                    self._linear = paddle.nn.Linear(1, 1)
                    self._dropout = paddle.nn.Dropout(p=0.5)
                def forward(self, input):
                    temp = self._linear(input)
                    temp = self._dropout(temp)
                    return temp
            x = paddle.randn([10, 1], 'float32')
            mylayer = MyLayer()
            mylayer.eval()  # set mylayer._dropout to eval mode
            out = mylayer(x)
            mylayer.train()  # set mylayer._dropout to train mode
            out = mylayer(x)
    """

    def __init__(self, name_scope=None, dtype="float32"):
        self.training = True
        if name_scope is None:
            name_scope = _convert_camel_to_snake(self.__class__.__name__)
            name_scope = _scope_dist2single(name_scope)
        self._full_name = unique_name.generate(name_scope)
        self._helper = LayerObjectHelper(self._full_name)
        self._built = False
        self._dtype = dtype
        self._init_in_dynamic_mode = in_dygraph_mode()

        self._parameters = collections.OrderedDict()
        # Buffers the variable (not parameter) created in layer
        self._buffers = collections.OrderedDict()
        self._non_persistable_buffer_names_set = set()
        self._sub_layers = collections.OrderedDict()
        self._loaddict_holder = collections.OrderedDict()

        # Record generated op_descs in this layer
        self._op_recorder = LayerOpsRecoder(ops=[], hooks=[])
        self._customized_attrs = {}

        self._forward_pre_hooks = collections.OrderedDict()
        self._forward_post_hooks = collections.OrderedDict()

        self._casted_by_pure_fp16 = False

        self._state_dict_hooks = collections.OrderedDict()
        # Records orignal functions after @to_static to support to rollback
        self._original_funcs = collections.OrderedDict()

    def train(self):
        """

        Sets this Layer and all its sublayers to training mode.
        This only effects certain modules like `Dropout` and `BatchNorm`.

        Returns:
            None

        Examples:
            .. code-block:: python

                import paddle

                class MyLayer(paddle.nn.Layer):
                    def __init__(self):
                        super().__init__()
                        self._linear = paddle.nn.Linear(1, 1)
                        self._dropout = paddle.nn.Dropout(p=0.5)

                    def forward(self, input):
                        temp = self._linear(input)
                        temp = self._dropout(temp)
                        return temp

                x = paddle.randn([10, 1], 'float32')
                mylayer = MyLayer()
                mylayer.eval()  # set mylayer._dropout to eval mode
                out = mylayer(x)
                mylayer.train()  # set mylayer._dropout to train mode
                out = mylayer(x)

        """
        # global setting in dygraph
        # NOTE(chenweihang): nn.Layer also can be used in static mode,
        # but _dygraph_tracer() can not be called in static mode
        if in_dygraph_mode():
            framework._dygraph_tracer().train_mode()
        # Layer-level setting
        self.training = True
        for layer in self.sublayers():
            layer.training = True

    def eval(self):
        """
        Sets this Layer and all its sublayers to evaluation mode.
        This only effects certain modules like `Dropout` and `BatchNorm`.

        Returns:
            None

        Example::
            .. code-block:: python

                import paddle

                class MyLayer(paddle.nn.Layer):
                    def __init__(self):
                        super().__init__()
                        self._linear = paddle.nn.Linear(1, 1)
                        self._dropout = paddle.nn.Dropout(p=0.5)

                    def forward(self, input):
                        temp = self._linear(input)
                        temp = self._dropout(temp)
                        return temp

                x = paddle.randn([10, 1], 'float32')
                mylayer = MyLayer()
                mylayer.eval()  # set mylayer._dropout to eval mode
                out = mylayer(x)
                print(out)

        """
        # global setting in dygraph
        # NOTE(chenweihang): nn.Layer also can be used in static mode,
        # but _dygraph_tracer() can not be called in static mode
        if in_dygraph_mode():
            framework._dygraph_tracer().eval_mode()
        # Layer-level setting
        self.training = False
        for layer in self.sublayers():
            layer.training = False

    def apply(self, fn):
        """

        Applies ``fn`` recursively to every sublayer (as returned by ``.sublayers()``)
        as well as self. Typical use includes initializing the parameters of a model.

        Parameters:
            fn (function): a function to be applied to each sublayer

        Returns:
            Layer, self

        Example::
            .. code-block:: python

              import paddle
              import paddle.nn as nn

              net = nn.Sequential(nn.Linear(2, 2), nn.Linear(2, 2))

              def init_weights(layer):
                  if type(layer) == nn.Linear:
                      print('before init weight:', layer.weight.numpy())
                      new_weight = paddle.full(shape=layer.weight.shape, dtype=layer.weight.dtype, fill_value=0.9)
                      layer.weight.set_value(new_weight)
                      print('after init weight:', layer.weight.numpy())

              net.apply(init_weights)

              print(net.state_dict())

        """
        for layer in self.children():
            layer.apply(fn)

        fn(self)

        return self

    def full_name(self):
        """

        Full name for this layer, composed by name_scope + "/" + MyLayer.__class__.__name__

        Returns:
            str, full name of this layer.

        Example::
            .. code-block:: python

                import paddle

                class LinearNet(paddle.nn.Layer):
                    def __init__(self):
                        super().__init__(name_scope = "demo_linear_net")
                        self._linear = paddle.nn.Linear(1, 1)

                    def forward(self, x):
                        return self._linear(x)

                linear_net = LinearNet()
                print(linear_net.full_name())   # demo_linear_net_0

        """
        return self._full_name

    def register_forward_post_hook(self, hook):
        """

        Register a forward post-hook for Layer. The hook will be called after `forward` function has been computed.

        It should have the following form, `input` and `output` of the `hook` is `input` and `output` of the `Layer` respectively.
        User can use forward post-hook to change the output of the Layer or perform information statistics tasks on the Layer.

        hook(Layer, input, output) -> None or modified output

        Parameters:
            hook(function): a function registered as a forward post-hook

        Returns:
            HookRemoveHelper, a HookRemoveHelper object that can be used to remove the added hook by calling `hook_remove_helper.remove()` .

        Examples:
            .. code-block:: python

                import paddle
                import numpy as np

                # the forward_post_hook change the output of the layer: output = output * 2
                def forward_post_hook(layer, input, output):
                    # user can use layer, input and output for information statistis tasks

                    # change the output
                    return output * 2

                linear = paddle.nn.Linear(13, 5)

                # register the hook
                forward_post_hook_handle = linear.register_forward_post_hook(forward_post_hook)

                value1 = np.arange(26).reshape(2, 13).astype("float32")
                in1 = paddle.to_tensor(value1)

                out0 = linear(in1)

                # remove the hook
                forward_post_hook_handle.remove()

                out1 = linear(in1)

                # hook change the linear's output to output * 2, so out0 is equal to out1 * 2.
                assert (out0.numpy() == (out1.numpy()) * 2).any()

        """
        hook_remove_helper = HookRemoveHelper(self._forward_post_hooks)
        self._forward_post_hooks[hook_remove_helper._hook_id] = hook
        return hook_remove_helper

    def register_forward_pre_hook(self, hook):
        """

        Register a forward pre-hook for Layer. The hook will be called before `forward` function has been computed.

        It should have the following form, `input` of the `hook` is `input` of the `Layer`,
        hook can either return a tuple or a single modified value in the hook. We will wrap the value into a tuple if
        a single value is returned(unless that value is already a tuple).
        User can use forward pre-hook to change the input of the Layer or perform information statistics tasks on the Layer.

        hook(Layer, input) -> None or modified input

        Parameters:
            hook(function): a function registered as a forward pre-hook

        Returns:
            HookRemoveHelper, a HookRemoveHelper object that can be used to remove the added hook by calling `hook_remove_helper.remove()` .

        Examples:
            .. code-block:: python

                import paddle
                import numpy as np

                # the forward_pre_hook change the input of the layer: input = input * 2
                def forward_pre_hook(layer, input):
                    # user can use layer and input for information statistis tasks

                    # change the input
                    input_return = (input[0] * 2)
                    return input_return

                linear = paddle.nn.Linear(13, 5)

                # register the hook
                forward_pre_hook_handle = linear.register_forward_pre_hook(forward_pre_hook)

                value0 = np.arange(26).reshape(2, 13).astype("float32")
                in0 = paddle.to_tensor(value0)
                out0 = linear(in0)

                # remove the hook
                forward_pre_hook_handle.remove()

                value1 = value0 * 2
                in1 = paddle.to_tensor(value1)
                out1 = linear(in1)

                # hook change the linear's input to input * 2, so out0 is equal to out1.
                assert (out0.numpy() == out1.numpy()).any()
        """
        hook_remove_helper = HookRemoveHelper(self._forward_pre_hooks)
        self._forward_pre_hooks[hook_remove_helper._hook_id] = hook
        return hook_remove_helper

    def create_parameter(
        self,
        shape,
        attr=None,
        dtype=None,
        is_bias=False,
        default_initializer=None,
    ):
        """Create parameters for this layer.

        Parameters:
            shape(list): Shape of the parameter.
            attr(ParamAttr, optional): Parameter attribute of weight. Please refer to :ref:`api_paddle_ParamAttr`. Default: None.
            dtype(str, optional): Data type of this parameter.
                If set str, it can be "bool",  "float16", "float32", "float64",
                "int8", "int16", "int32", "int64", "uint8" or "uint16". Default: "float32".
            is_bias(bool, optional): if this is a bias parameter. Default: False.
            default_initializer(Initializer, optional): the default initializer for this parameter.
                If set None, default initializer will be set to paddle.nn.initializer.Xavier and paddle.nn.initializer.Constant
                for non-bias and bias parameter, respectively. Default: None.

        Returns:
            :Tensor, created parameter.

        Examples:
            .. code-block:: python

                import paddle

                class MyLayer(paddle.nn.Layer):
                    def __init__(self):
                        super().__init__()
                        self._linear = paddle.nn.Linear(1, 1)
                        w_tmp = self.create_parameter([1,1])
                        self.add_parameter("w_tmp", w_tmp)

                    def forward(self, input):
                        return self._linear(input)

                mylayer = MyLayer()
                for name, param in mylayer.named_parameters():
                    print(name, param)      # will print w_tmp,_linear.weight,_linear.bias

        """
        temp_attr = copy.deepcopy(attr)
        if isinstance(temp_attr, str) and temp_attr == "":
            temp_attr = None
        return self._helper.create_parameter(
            temp_attr, shape, dtype, is_bias, default_initializer
        )

    @deprecated(
        since="2.0.0",
        update_to="paddle.nn.Layer.create_tensor",
        reason="New api in create_tensor, easier to use.",
    )
    def create_variable(self, name=None, persistable=None, dtype=None):
        """

        Create Tensor for this layer.

        Parameters:
            name(str, optional): name of the tensor. Please refer to :ref:`api_guide_Name` . Default: None

            persistable(bool, optional): if set this tensor persistable. Default: False

            dtype(str, optional): data type of this parameter. If set str, it can be "bool", "float16", "float32", "float64","int8", "int16", "int32", "int64", "uint8" or "uint16". If set None, it will be "float32". Default: None

        Returns:
            Tensor, created Tensor.

        Examples:
            .. code-block:: python

                import paddle

                class MyLinear(paddle.nn.Layer):
                    def __init__(self,
                                in_features,
                                out_features):
                        super().__init__()
                        self.linear = paddle.nn.Linear( 10, 10)

                        self.back_var = self.create_variable(name = "linear_tmp_0", dtype=self._dtype)

                    def forward(self, input):
                        out = self.linear(input)
                        paddle.assign( out, self.back_var)

                        return out

        """
        if name is not None:
            var_name = ".".join([self._full_name, name])
        else:
            var_name = unique_name.generate(
                ".".join([self._full_name, "_generated_var"])
            )

        return self._helper.main_program.current_block().create_var(
            name=var_name,
            persistable=persistable,
            dtype=dtype,
            type=core.VarDesc.VarType.LOD_TENSOR,
        )

    # TODO: Add more parameter list when we need them
    def create_tensor(self, name=None, persistable=None, dtype=None):
        """

        Create Tensor for this layer.

        Parameters:
            name(str, optional): name of the tensor. Please refer to :ref:`api_guide_Name` . Default: None
            persistable(bool, optional): if set this tensor persistable. Default: False
            dtype(str, optional): data type of this parameter.
                If set str, it can be "bool",  "float16", "float32", "float64",
                "int8", "int16", "int32", "int64", "uint8" or "uint16".
                If set None, it will be "float32". Default: None

        Returns:
            Tensor, created Tensor.

        Examples:
            .. code-block:: python

                import paddle

                class MyLinear(paddle.nn.Layer):
                    def __init__(self,
                                in_features,
                                out_features):
                        super().__init__()
                        self.linear = paddle.nn.Linear( 10, 10)

                        self.back_var = self.create_tensor(name = "linear_tmp_0", dtype=self._dtype)

                    def forward(self, input):
                        out = self.linear(input)
                        paddle.assign( out, self.back_var)

                        return out

        """
        if name is not None:
            var_name = ".".join([self._full_name, name])
        else:
            var_name = unique_name.generate(
                ".".join([self._full_name, "_generated_var"])
            )

        return self._helper.main_program.current_block().create_var(
            name=var_name,
            persistable=persistable,
            dtype=dtype,
            type=core.VarDesc.VarType.LOD_TENSOR,
        )

    def parameters(self, include_sublayers=True):
        """

        Returns a list of all Parameters from current layer and its sub-layers.

        Returns:
            list of Tensor, a list of Parameters.

        Examples:
            .. code-block:: python

                import paddle

                linear = paddle.nn.Linear(1,1)
                print(linear.parameters())  # print linear_0.w_0 and linear_0.b_0

        """
        ret = [
            param
            for _, param in self.named_parameters(
                include_sublayers=include_sublayers
            )
        ]
        return ret

    def children(self):
        """

        Returns an iterator over immediate children layers.

        Yields:
            Layer: a child layer

        Examples:
            .. code-block:: python

                import paddle

                linear1 = paddle.nn.Linear(10, 3)
                linear2 = paddle.nn.Linear(3, 10, bias_attr=False)
                model = paddle.nn.Sequential(linear1, linear2)

                layer_list = list(model.children())

                print(layer_list)   # [<paddle.nn.layer.common.Linear object at 0x7f7b8113f830>, <paddle.nn.layer.common.Linear object at 0x7f7b8113f950>]

        """
        for _, layer in self.named_children():
            yield layer

    def named_children(self):
        """Returns an iterator over immediate children layers, yielding both
        the name of the layer as well as the layer itself.

        Yields:
            (string, Layer): Tuple containing a name and child layer

        Examples:
            .. code-block:: python

                import paddle

                linear1 = paddle.nn.Linear(10, 3)
                linear2 = paddle.nn.Linear(3, 10, bias_attr=False)
                model = paddle.nn.Sequential(linear1, linear2)
                for prefix, layer in model.named_children():
                    print(prefix, layer)
                    # ('0', <paddle.nn.layer.common.Linear object at 0x7fb61ed85830>)
                    # ('1', <paddle.nn.layer.common.Linear object at 0x7fb61ed85950>)

        """
        memo = set()
        for name, layer in self._sub_layers.items():
            if layer is not None and layer not in memo:
                memo.add(layer)
                yield name, layer

    def sublayers(self, include_self=False):
        """

        Returns a list of sub layers.

        Parameters:
            include_self(bool, optional): Whether return self as sublayers. Default: False

        Returns:
            list of Layer, a list of sub layers.

        Examples:
            .. code-block:: python

                import paddle

                class MyLayer(paddle.nn.Layer):
                    def __init__(self):
                        super().__init__()
                        self._linear = paddle.nn.Linear(1, 1)
                        self._dropout = paddle.nn.Dropout(p=0.5)

                    def forward(self, input):
                        temp = self._linear(input)
                        temp = self._dropout(temp)
                        return temp

                mylayer = MyLayer()
                print(mylayer.sublayers())  # [<paddle.nn.layer.common.Linear object at 0x7f44b58977d0>, <paddle.nn.layer.common.Dropout object at 0x7f44b58978f0>]

        """
        ret = [
            layer
            for _, layer in self.named_sublayers(include_self=include_self)
        ]
        return ret

    def named_parameters(self, prefix='', include_sublayers=True):
        """
        Returns an iterator over all parameters in the Layer, yielding tuple of name and parameter.

        Parameters:
            prefix(str, optional): Prefix to prepend to all parameter names. Default: ''.
            include_sublayers(bool, optional): Whether include the parameters of sublayers.
                If True, also include the named parameters from sublayers. Default: True.

        Yields:
            (string, Parameter): Tuple of name and Parameter

        Examples:
            .. code-block:: python

                import paddle

                fc1 = paddle.nn.Linear(10, 3)
                fc2 = paddle.nn.Linear(3, 10, bias_attr=False)
                model = paddle.nn.Sequential(fc1, fc2)
                for name, param in model.named_parameters():
                    print(name, param)

        """
        params_set = set()
        named_sublayers = (
            self.named_sublayers(prefix=prefix, include_self=True)
            if include_sublayers
            else zip([prefix], [self])
        )
        for layer_prefix, sublayer in named_sublayers:
            params = sublayer._parameters.items()
            for key, param in params:
                if param is None or param in params_set:
                    continue
                params_set.add(param)
                name = layer_prefix + ('.' if layer_prefix else '') + key
                yield name, param

    def named_sublayers(self, prefix='', include_self=False, layers_set=None):
        """
        Returns an iterator over all sublayers in the Layer, yielding tuple of name and sublayer.
        The duplicate sublayer will only be yielded once.

        Parameters:
            prefix(str, optional): Prefix to prepend to all parameter names. Default: ''.
            include_self(bool, optional): Whether include the Layer itself. Default: False.
            layers_set(set, optional): The set to record duplicate sublayers. Default: None.

        Yields:
            (string, Layer): Tuple of name and Layer

        Examples:
            .. code-block:: python

                import paddle

                fc1 = paddle.nn.Linear(10, 3)
                fc2 = paddle.nn.Linear(3, 10, bias_attr=False)
                model = paddle.nn.Sequential(fc1, fc2)
                for prefix, layer in model.named_sublayers():
                    print(prefix, layer)

        """
        if layers_set is None:
            layers_set = set()
        if include_self and self not in layers_set:
            layers_set.add(self)
            yield prefix, self
        for key, layer in self._sub_layers.items():
            if layer is None:
                continue
            layer_prefix = prefix + ('.' if prefix else '') + key
            for p, l in layer.named_sublayers(
                prefix=layer_prefix, include_self=True, layers_set=layers_set
            ):
                yield p, l

    def register_buffer(self, name, tensor, persistable=True):
        """
        Registers a tensor as buffer into the layer.

        `buffer` is a non-trainable tensor and will not be updated by optimizer,
        but is necessary for evaluation and inference. For example, the mean and variance in BatchNorm layers.
        The registered buffer is persistable by default, and will be saved into
        `state_dict` alongside parameters. If set persistable=False, it registers
        a non-persistable buffer, so that it will not be a part of `state_dict` .

        Buffers can be accessed as attributes using given names.

        Parameters:
            name (string): name of the buffer. The buffer can be accessed
                from this layer using the given name
            tensor (Tensor): the tensor to be registered as buffer.
            persistable (bool): whether the buffer is part of this layer's
                state_dict.

        Returns:
            None

        Examples:
            .. code-block:: python

                import numpy as np
                import paddle

                linear = paddle.nn.Linear(10, 3)
                value = np.array([0]).astype("float32")
                buffer = paddle.to_tensor(value)
                linear.register_buffer("buf_name", buffer, persistable=True)

                # get the buffer by attribute.
                print(linear.buf_name)

        """

        if '_buffers' not in self.__dict__:
            raise ValueError("super().__init__() should be called first")
        elif not isinstance(name, str):
            raise TypeError(
                "The name of buffer should be a string, but received {}.".format(
                    type(name).__name__
                )
            )
        elif '.' in name:
            raise KeyError(
                "The name of buffer can not contain `.`, "
                "because when you access the newly added buffer in the "
                "form of `self.**.**`, it will cause AttributeError."
            )
        elif name == '':
            raise KeyError("The name of buffer can not be empty.")
        elif hasattr(self, name) and name not in self._buffers:
            raise KeyError(f"attribute '{name}' already exists.")
        elif tensor is not None and not (type(tensor) == core.eager.Tensor):
            raise TypeError(
                "The registered buffer should be a Paddle.Tensor, but received {}.".format(
                    type(tensor).__name__
                )
            )
        else:
            self._buffers[name] = tensor
            if persistable:
                self._non_persistable_buffer_names_set.discard(name)
            else:
                self._non_persistable_buffer_names_set.add(name)

    def buffers(self, include_sublayers=True):
        """

        Returns a list of all buffers from current layer and its sub-layers.

        Parameters:
            include_sublayers(bool, optional): Whether include the buffers of sublayers. If True, also include the buffers from sublayers. Default: True

        Returns:
            list of Tensor, a list of buffers.

        Examples:
            .. code-block:: python

                import numpy as np
                import paddle

                linear = paddle.nn.Linear(10, 3)
                value = np.array([0]).astype("float32")
                buffer = paddle.to_tensor(value)
                linear.register_buffer("buf_name", buffer, persistable=True)

                print(linear.buffers())     # == print([linear.buf_name])

        """
        ret = [
            buffer
            for _, buffer in self.named_buffers(
                include_sublayers=include_sublayers
            )
        ]
        return ret

    def named_buffers(self, prefix='', include_sublayers=True):
        """
        Returns an iterator over all buffers in the Layer, yielding tuple of name and Tensor.

        Parameters:
            prefix(str, optional): Prefix to prepend to all buffer names. Default: ''.
            include_sublayers(bool, optional): Whether include the buffers of sublayers.
                If True, also include the named buffers from sublayers. Default: True.

        Yields:
            (string, Tensor): Tuple of name and tensor

        Examples:
            .. code-block:: python

                import numpy as np
                import paddle

                fc1 = paddle.nn.Linear(10, 3)
                buffer1 = paddle.to_tensor(np.array([0]).astype("float32"))
                # register a tensor as buffer by specific `persistable`
                fc1.register_buffer("buf_name_1", buffer1, persistable=True)

                fc2 = paddle.nn.Linear(3, 10)
                buffer2 = paddle.to_tensor(np.array([1]).astype("float32"))
                # register a buffer by assigning an attribute with Tensor.
                # The `persistable` can only be False by this way.
                fc2.buf_name_2 = buffer2

                model = paddle.nn.Sequential(fc1, fc2)

                # get all named buffers
                for name, buffer in model.named_buffers():
                    print(name, buffer)

        """
        buffers_set = set()
        named_sublayers = (
            self.named_sublayers(prefix=prefix, include_self=True)
            if include_sublayers
            else zip([prefix], [self])
        )
        for layer_prefix, sublayer in named_sublayers:
            buffers = sublayer._buffers.items()
            for key, buffer in buffers:
                if buffer is None or buffer in buffers_set:
                    continue
                buffers_set.add(buffer)
                name = layer_prefix + ('.' if layer_prefix else '') + key
                yield name, buffer

    def clear_gradients(self):
        """
        Clear the gradients of all parameters for this layer.

        Returns:
            None

        Examples:
            .. code-block:: python

                import paddle
                import numpy as np

                value = np.arange(26).reshape(2, 13).astype("float32")
                a = paddle.to_tensor(value)
                linear = paddle.nn.Linear(13, 5)
                adam = paddle.optimizer.Adam(learning_rate=0.01,
                                            parameters=linear.parameters())
                out = linear(a)
                out.backward()
                adam.step()
                linear.clear_gradients()

        """
        for p in self.parameters():
            if p.trainable:
                p.clear_gradient()

    def _build_once(self, *args, **kwargs):
        pass

    def _dygraph_call_func(self, *inputs, **kwargs):
        from paddle.distributed import parallel_helper

        for forward_pre_hook in self._forward_pre_hooks.values():
            hook_result = forward_pre_hook(self, inputs)
            if hook_result is not None:
                if not isinstance(hook_result, tuple):
                    hook_result = (hook_result,)
                inputs = hook_result

        if not self._built:
            with program_desc_tracing_guard(False):
                self._build_once(*inputs, **kwargs)

                # TODO(liuyuhui) Only xpu broadcast parameters here.
                # The other device is to call _sync_params_buffers in DataParallel
                # to realize the parameter synchronization among multiply cards.
                if (
                    parallel_helper._is_data_parallel_mode()
                    and paddle.is_compiled_with_xpu()
                ):
                    parallel_helper._broadcast_parameters(
                        self._parameters.values()
                    )

            self._built = True

        if in_profiler_mode():
            with profiler.RecordEvent(
                self.__class__.__name__, profiler.TracerEventType.Forward
            ):
                outputs = self.forward(*inputs, **kwargs)
        else:
            outputs = self.forward(*inputs, **kwargs)

        for forward_post_hook in self._forward_post_hooks.values():
            hook_result = forward_post_hook(self, inputs, outputs)
            if hook_result is not None:
                outputs = hook_result

        return outputs

    def __call__(self, *inputs, **kwargs):
        if (
            (not in_declarative_mode())
            and (not self._forward_pre_hooks)
            and (not self._forward_post_hooks)
            and (not self._built)
            and in_dygraph_mode()
            and (not in_profiler_mode())
        ):
            self._build_once(*inputs, **kwargs)
            return self.forward(*inputs, **kwargs)
        else:
            return self._dygraph_call_func(*inputs, **kwargs)

    def forward(self, *inputs, **kwargs):
        """
        Defines the computation performed at every call.
        Should be overridden by all subclasses.

        Parameters:
            *inputs(tuple): unpacked tuple arguments
            **kwargs(dict): unpacked dict arguments
        """
        raise NotImplementedError

    def backward(self, *inputs):
        raise ValueError("Layer shouldn't implement backward")

    def add_sublayer(self, name, sublayer):
        """

        Adds a sub Layer instance.

        Added sublayer can be accessed by self.name

        Parameters:
            name(str): name of this sublayer.
            sublayer(Layer): an instance of Layer.
        Returns:
            Layer, the sublayer passed in.

        Examples:
            .. code-block:: python

                import paddle

                class MySequential(paddle.nn.Layer):
                    def __init__(self, *layers):
                        super().__init__()
                        if len(layers) > 0 and isinstance(layers[0], tuple):
                            for name, layer in layers:
                                self.add_sublayer(name, layer)
                        else:
                            for idx, layer in enumerate(layers):
                                self.add_sublayer(str(idx), layer)

                    def forward(self, input):
                        for layer in self._sub_layers.values():
                            input = layer(input)
                        return input

                fc1 = paddle.nn.Linear(10, 3)
                fc2 = paddle.nn.Linear(3, 10, bias_attr=False)
                model = MySequential(fc1, fc2)
                for prefix, layer in model.named_sublayers():
                    print(prefix, layer)

        """
        assert isinstance(sublayer, Layer) or sublayer is None

        self._sub_layers[name] = sublayer
        return sublayer

    def add_parameter(self, name, parameter):
        """Adds a Parameter instance.

        Added parameter can be accessed by self.name

        Parameters:
            name(str): name of this sublayer.
            parameter(Parameter): an instance of Parameter.
        Returns:
            Parameter, the parameter passed in.
        Examples:
            .. code-block:: python

                import paddle

                class MyLayer(paddle.nn.Layer):
                    def __init__(self):
                        super().__init__()
                        self._linear = paddle.nn.Linear(1, 1)
                        w_tmp = self.create_parameter([1,1])
                        self.add_parameter("w_tmp", w_tmp)

                    def forward(self, input):
                        return self._linear(input)

                mylayer = MyLayer()
                for name, param in mylayer.named_parameters():
                    print(name, param)      # will print w_tmp,_linear.weight,_linear.bias

        """
        if '_parameters' not in self.__dict__:
            raise RuntimeError("super().__init__() should be called firstly.")
        elif not isinstance(name, str):
            raise TypeError(
                "The name of parameter should be a string, but received {}.".format(
                    type(name).__name__
                )
            )
        elif '.' in name:
            raise KeyError(
                "The name of parameter can not contain `.`, "
                "because when you access the newly added parameter in the "
                "form of `self.**.**`, it will cause AttributeError."
            )
        elif name == '':
            raise KeyError("The name of parameter can not be empty.")
        elif hasattr(self, name) and name not in self._parameters:
            raise KeyError(f"The parameter '{name}' already exists.")
        elif parameter is not None and not isinstance(
            parameter, framework.Parameter
        ):
            raise TypeError(
                "The parameter to be added should be a Parameter, but received {}.".format(
                    type(parameter).__name__
                )
            )
        else:
            if parameter is None:
                self._parameters[name] = None

            if len(self._loaddict_holder) > 0:
                assert (
                    parameter.name in self._loaddict_holder
                ), "Parameter not found, Can't not find [ {} ] in state_dict".format(
                    parameter.name
                )

                parameter.set_value(self._loaddict_holder[parameter.name])

            self._parameters[name] = parameter
        return parameter

    def _set_op_attrs(self, attrs):
        """
        Add customized attribute while append_op. In case of quantization, we want to save
        some attributes into op_desc while exporting inference model by @to_static.

        Arguments:
            attrs(dict): customized attributes that will be added into op_descs.

        NOTE: The interface is only exposed to developers.
        """

        def is_already_registered(is_pre_hook):
            layers_hooks = (
                self._forward_pre_hooks
                if is_pre_hook
                else self._forward_post_hooks
            )
            candidate_hook = (
                record_program_ops_pre_hook
                if is_pre_hook
                else set_op_customized_attrs_post_hook
            )

            already_registed = False
            if layers_hooks:
                last_key = next(reversed(layers_hooks))
                already_registed = layers_hooks[last_key] == candidate_hook

            return already_registed

        if not isinstance(attrs, dict):
            raise TypeError(
                "attrs should be type(dict), but received {}".format(
                    type(attrs).__name__
                )
            )

        # NOTE: Overwrite behavior for same key.
        self._customized_attrs.update(attrs)

        if not is_already_registered(is_pre_hook=True):
            pre_hook_helper = self.register_forward_pre_hook(
                record_program_ops_pre_hook
            )
            assert len(self._op_recorder.hooks) == 0
            self._op_recorder.hooks = [pre_hook_helper]

        # manually register post_hook to ensure it is inserted into the head.
        if not is_already_registered(is_pre_hook=False):
            post_hook_helper = self.register_forward_post_hook(
                set_op_customized_attrs_post_hook
            )
            if len(self._forward_post_hooks) > 1:
                self._forward_post_hooks.move_to_end(
                    post_hook_helper._hook_id, last=False
                )

            assert len(self._op_recorder.hooks) == 1

            # hooks that need to be removed once we finish executing them.
            self._op_recorder.hooks.append(post_hook_helper)

    def __getstate__(self):
        return self.__dict__

    def __setstate__(self, state):
        self.__dict__.update(state)

    def __getattr__(self, name):
        if '_parameters' in self.__dict__:
            _parameters = self.__dict__['_parameters']
            if name in self._parameters:
                if in_declarative_mode():
                    return _convert_into_variable(self._parameters[name])
                return self._parameters[name]
        if '_sub_layers' in self.__dict__:
            _sub_layers = self.__dict__['_sub_layers']
            if name in self._sub_layers:
                return self._sub_layers[name]
        if '_buffers' in self.__dict__:
            _buffers = self.__dict__['_buffers']
            if name in _buffers:
                if in_declarative_mode():
                    return _convert_into_variable(_buffers[name])
                return _buffers[name]
        return object.__getattribute__(self, name)

    def __setattr__(self, name, value):
        def _remove_if_exist(*dicts):
            for d in dicts:
                if name in d:
                    del d[name]

        if isinstance(getattr(type(self), name, None), property):
            object.__setattr__(self, name, value)
        params = self.__dict__.get('_parameters', None)
        if isinstance(value, framework.Parameter):
            if params is None:
                raise ValueError("super().__init__() should be called first")
            if len(self._loaddict_holder) > 0:
                assert (
                    value.name in self._loaddict_holder
                ), "Parameter not found, Can't not find [ {} ] in state_dict".format(
                    value.name
                )

                value.set_value(self._loaddict_holder[value.name])

            _remove_if_exist(self.__dict__, self._buffers, self._sub_layers)
            params[name] = value
        elif params is not None and name in params:
            if value is not None:
                raise TypeError(
                    "assignment to parameter '{}' should be of type Parameter or None, but got '{}'".format(
                        name, type(value).__name__
                    )
                )
            params[name] = None
        else:
            layers = self.__dict__.get('_sub_layers', None)
            if isinstance(value, Layer):
                if layers is None:
                    raise ValueError(
                        "super().__init__() should be called first"
                    )

                _remove_if_exist(self.__dict__, self._parameters, self._buffers)
                layers[name] = value
            elif layers is not None and name in layers:
                if value is not None:
                    raise TypeError(
                        "assignment to sublayer '{}' should be of type Layer or None, but got '{}'".format(
                            name, type(value).__name__
                        )
                    )
                layers[name] = None
            else:
                _buffers = self.__dict__.get('_buffers', None)
                if isinstance(value, core.eager.Tensor):
                    if _buffers is None:
                        raise ValueError(
                            "super().__init__() should be called first"
                        )
                    _remove_if_exist(
                        self.__dict__, self._parameters, self._sub_layers
                    )
                    # Set persistable=False by default. Only `register_buffer` can
                    # add a persistable buffer.
                    if name not in self._buffers:
                        self._non_persistable_buffer_names_set.add(name)
                    if not value.name:
                        value.name = unique_name.generate('_buffers_' + name)
                    _buffers[name] = value
                elif _buffers is not None and name in _buffers:
                    # Note(Aurelius84): In Dy2stat, the value of the Buffer may be modified in
                    # decorated function, such as `self.buffer = new_tensor`. So we update its
                    # value via `assign`.
                    if type(value) == framework.Variable:
                        from paddle import assign

                        # Note(zhhsplendid): the condition below happens in PaddleGan model,
                        # but should all non-Variable _buffers[name] be re-assign? We
                        # should consider it in the future. I current wrote this as
                        # conservative code.
                        if in_declarative_mode() and _buffers[name] is None:
                            raise RuntimeError(
                                'In Dy2stat, self.{0} is a buffer and self.{0} is '
                                'not allowed to be set to Variable when self.{0} is None.'.format(
                                    name
                                )
                            )
                        elif (
                            _buffers[name] is None
                            or type(getattr(self, name)) == core.eager.Tensor
                        ):
                            _buffers[name] = assign(value)
                        else:
                            assign(value, getattr(self, name))
                    elif value is not None:
                        raise TypeError(
                            "assignment to buffers '{}' should be of type core.Tensor or None, but got '{}'".format(
                                name, type(value).__name__
                            )
                        )
                    else:
                        # Assigning None will remove the buffer, but if re-assign a new varBase to it,
                        # it will be remarked as a buffer with same `persistable` attribute.
                        _buffers[name] = None
                else:
                    object.__setattr__(self, name, value)

    def __delattr__(self, name):
        if name in self._parameters:
            del self._parameters[name]
        elif name in self._sub_layers:
            del self._sub_layers[name]
        elif name in self._buffers:
            del self._buffers[name]
            self._non_persistable_buffer_names_set.discard(name)
        else:
            object.__delattr__(self, name)

    def __dir__(self):
        """
        Return a list. Get all parameters, buffers(non-parameter tensors), sublayers, method and attr of Layer.

        Examples:
            .. code-block:: python
                import paddle
                import numpy as np

                class Mylayer(paddle.nn.Layer):
                    def __init__(self):
                        super().__init__()
                        self.linear1 = paddle.nn.Linear(10, 10)
                        self.linear2 = paddle.nn.Linear(5, 5)
                        self.conv2d = paddle.nn.Conv2D(3, 2, 3)
                        self.embedding = paddle.nn.Embedding(128, 16)
                        self.h_0 = paddle.to_tensor(np.zeros([10, 10]).astype('float32'))

                mylayer = Mylayer()
                print(dir(mylayer))
                # only parts are shown, because of list have too much content
                # ['__call__', '__class__',  ... , 'conv2d', 'embedding', 'h_0', 'linear1', 'linear2', ... , 'sublayers', 'train']

        """
        method = dir(self.__class__)
        attrs = list(self.__dict__.keys())
        parameters = list(self._parameters.keys())
        sublayers = list(self._sub_layers.keys())
        buffers = list(self._buffers.keys())

        keys = method + attrs + parameters + sublayers + buffers

        return keys

    def extra_repr(self):
        """
        Extra representation of this layer, you can have custom implementation
        of your own layer.
        """
        return ''

    def __repr__(self):
        extra_lines = []
        extra_repr = self.extra_repr()
        extra_lines = extra_repr.split('\n')
        sublayer_lines = []
        for name, layer in self._sub_layers.items():
            sublayer_str = repr(layer)
            sublayer_str = _addindent(sublayer_str, 2)
            sublayer_lines.append('(' + name + '): ' + sublayer_str)

        final_str = self.__class__.__name__ + '('
        if extra_lines:
            if len(extra_lines) > 1:
                final_str += '\n  ' + '\n  '.join(extra_lines) + '\n'
            elif len(extra_lines) == 1:
                final_str += extra_lines[0]
        if sublayer_lines:
            final_str += '\n  ' + '\n  '.join(sublayer_lines) + '\n'

        final_str += ')'
        return final_str

    def register_state_dict_hook(self, hook):
        hook_remove_helper = HookRemoveHelper(self._state_dict_hooks)
        self._state_dict_hooks[hook_remove_helper._hook_id] = hook
        return hook_remove_helper

    def _obtain_parameters_buffers(
        self,
        destination=None,
        include_sublayers=True,
        structured_name_prefix="",
    ):
        """
        The difference from state_dict() is that state_dict_hook will not be called,
        but the original types of parameters and buffers will be maintained.
        """
        if destination is None:
            destination = collections.OrderedDict()
        for name, data in self._parameters.items():
            if data is not None:
                destination[structured_name_prefix + name] = data
        for name, buffer in self._buffers.items():
            if (
                buffer is not None
                and name not in self._non_persistable_buffer_names_set
            ):
                destination[structured_name_prefix + name] = buffer

        if include_sublayers:
            for layer_name, layer_item in self._sub_layers.items():
                if layer_item is not None:
                    destination_temp = destination.copy()
                    destination_temp.update(
                        layer_item._obtain_parameters_buffers(
                            destination_temp,
                            include_sublayers,
                            structured_name_prefix + layer_name + ".",
                        )
                    )
                    destination = destination_temp
        return destination

    def _state_dict_impl(
        self,
        destination=None,
        include_sublayers=True,
        structured_name_prefix="",
        include_non_persistable_buffer=False,
        use_hook=True,
    ):
        """
        Get all parameters and persistable buffers of current layer and its sub-layers. And set them into a dict

        Parameters:
            destination(dict, optional) : If provide, all the parameters and persistable buffers will be set to this dict . Default: None
            include_sublayers(bool, optional) : If true, also include the parameters and persistable buffers from sublayers. Default: True
            include_non_persistable_buffer(bool, optional): If true, include non persistable buffers of current layer and its sub-layers, it is used in pure fp16 and jit.save. Default: False
            use_hook(bool, optional) : If true, the operations contained in _state_dict_hooks will be appended to the destination. Default: True
        """

        if destination is None:
            destination = collections.OrderedDict()
        for name, data in self._parameters.items():
            if data is not None:
                destination[structured_name_prefix + name] = data
        for name, buffer in self._buffers.items():
            if not include_non_persistable_buffer:
                if (
                    buffer is not None
                    and name not in self._non_persistable_buffer_names_set
                ):
                    destination[structured_name_prefix + name] = buffer
            else:
                if buffer is not None:
                    destination[structured_name_prefix + name] = buffer

        if include_sublayers:
            for layer_name, layer_item in self._sub_layers.items():
                if layer_item is not None:
                    destination_temp = destination.copy()
                    destination_temp.update(
                        layer_item._state_dict_impl(
                            destination_temp,
                            include_sublayers,
                            structured_name_prefix + layer_name + ".",
                            include_non_persistable_buffer,
                            use_hook,
                        )
                    )
                    destination = destination_temp
        if use_hook:
            for state_dict_hook in self._state_dict_hooks.values():
                hook_result = state_dict_hook(destination)
                if hook_result is not None:
                    destination = hook_result

        return destination

    def to_static_state_dict(
        self,
        destination=None,
        include_sublayers=True,
        structured_name_prefix="",
        use_hook=True,
    ):
        '''

        Get all parameters and buffers of current layer and its sub-layers. And set them into a dict

        Parameters:
            destination(dict, optional) : If provide, all the parameters and persistable buffers will be set to this dict . Default: None
            include_sublayers(bool, optional) : If true, also include the parameters and persistable buffers from sublayers. Default: True
            use_hook(bool, optional) : If true, the operations contained in _state_dict_hooks will be appended to the destination. Default: True

        Retruns:
            dict, a dict contains all the parameters and persistable buffers.

        Examples:
            .. code-block:: python

                import paddle

                emb = paddle.nn.Embedding(10, 10)

                state_dict = emb.to_static_state_dict()
                paddle.save( state_dict, "paddle_dy.pdparams")

        '''
        return self._state_dict_impl(
            destination=destination,
            include_sublayers=include_sublayers,
            structured_name_prefix=structured_name_prefix,
            include_non_persistable_buffer=True,
            use_hook=use_hook,
        )

    def state_dict(
        self,
        destination=None,
        include_sublayers=True,
        structured_name_prefix="",
        use_hook=True,
    ):
        '''
        Get all parameters and persistable buffers of current layer and its sub-layers. And set them into a dict

        Parameters:
            destination(dict, optional) : If provide, all the parameters and persistable buffers will be set to this dict . Default: None
            include_sublayers(bool, optional) : If true, also include the parameters and persistable buffers from sublayers. Default: True
            use_hook(bool, optional) : If true, the operations contained in _state_dict_hooks will be appended to the destination. Default: True

        Retruns:
            dict: a dict contains all the parameters and persistable buffers.

        Examples:
            .. code-block:: python

                import paddle

                emb = paddle.nn.Embedding(10, 10)

                state_dict = emb.state_dict()
                paddle.save( state_dict, "paddle_dy.pdparams")

        '''
        return self._state_dict_impl(
            destination=destination,
            include_sublayers=include_sublayers,
            structured_name_prefix=structured_name_prefix,
            include_non_persistable_buffer=False,
            use_hook=use_hook,
        )

    @framework.deprecate_stat_dict
    def set_state_dict(self, state_dict, use_structured_name=True):
        '''
        Set parameters and persistable buffers from state_dict. All the parameters and buffers will be reset by the tensor in the state_dict

        Parameters:
            state_dict(dict) : Dict contains all the parameters and persistable buffers.
            use_structured_name(bool, optional) : If true, use structured name as key, otherwise, use parameter or buffer name as key.
                                                  Default: True
        Returns:
            missing_keys(list):A list of str containing the missing keys
            unexpected_keys(list):A list of str containing the unexpected keys

        Examples:
            .. code-block:: python

                import paddle

                emb = paddle.nn.Embedding(10, 10)

                state_dict = emb.state_dict()
                paddle.save(state_dict, "paddle_dy.pdparams")
                para_state_dict = paddle.load("paddle_dy.pdparams")
                emb.set_state_dict(para_state_dict)

        '''
        missing_keys = []
        match_keys = set()
        unexpected_keys = []

        def _check_match(key, param):
            state = state_dict.get(key, None)
            if state is None:
                missing_keys.append(key)
                raise ValueError(f"{key} is not found in the provided dict.")
            if isinstance(state, (dict, list)):
                if len(state) != len(param):
                    missing_keys.append(key)
                    raise ValueError(
                        "{} receieves the length of {}, "
                        "but the expected shape is {}".format(
                            key, len(state), len(param)
                        )
                    )
                else:
                    match_keys.add(key)
                    return param, state
            else:
                state_shape = (
                    state.shape()
                    if inspect.ismethod(state.shape)
                    else state.shape
                )

                if list(state_shape) != list(param.shape):
                    missing_keys.append(key)
                    raise ValueError(
                        "{} receives a shape {}, but the expected shape is {}.".format(
                            key, list(state_shape), list(param.shape)
                        )
                    )
                match_keys.add(key)
                return param, state

        matched_param_state = []
        for key, param in self._state_dict_impl(use_hook=False).items():
            key_name = key if use_structured_name else param.name
            try:
                match_res = _check_match(key_name, param)
                matched_param_state.append(match_res)
            except ValueError as err:
                warnings.warn(f"Skip loading for {key}. " + str(err))
        for key in state_dict.keys():
            if key not in match_keys:
                unexpected_keys.append(key)
        if in_dygraph_mode():
            for param, state in matched_param_state:
                param.set_value(state)
        else:

            def _set_var(var, ndarray):
                t = global_scope().find_var(var.name).get_tensor()
                p = t._place()
                if p.is_cpu_place():
                    place = core.CPUPlace()
                elif p.is_cuda_pinned_place():
                    place = core.CUDAPinnedPlace()
                elif p.is_xpu_place():
                    p = core.Place()
                    p.set_place(t._place())
                    place = core.XPUPlace(p.xpu_device_id())
                else:
                    p = core.Place()
                    p.set_place(t._place())
                    place = core.CUDAPlace(p.gpu_device_id())
                t.set(ndarray, place)

            try:
                executor = Executor(_get_device())._default_executor
                # restore parameter states
                core._create_loaded_parameter(
                    [param for param, state in matched_param_state],
                    global_scope(),
                    executor,
                )
                for param, state in matched_param_state:
                    _set_var(param, state)
            except ValueError as e:
                raise ValueError(
                    "This error might happens in dy2static, while calling 'set_state_dict' dynamicly in 'forward', which is not supported. If you only need call 'set_state_dict' once, move it to '__init__'."
                )

        return missing_keys, unexpected_keys

    def to(self, device=None, dtype=None, blocking=None):
        '''
        Cast the parameters and buffers of Layer by the give device, dtype and blocking.

        Parameters:
            device(str|paddle.CPUPlace()|paddle.CUDAPlace()|paddle.CUDAPinnedPlace()|paddle.XPUPlace()|None, optional): The device of the Layer which want to be stored.
            If None, the device is the same with the original Tensor. If device is string, it can be ``cpu``, ``gpu:x`` and ``xpu:x``, where ``x`` is the
            index of the GPUs or XPUs. Default: None.

            dtype(str|numpy.dtype|paddle.dtype|None, optional): The type of the data. If None, the dtype is the same with the original Tensor. Default: None.

            blocking(bool|None, optional): If False and the source is in pinned memory, the copy will be
              asynchronous with respect to the host. Otherwise, the argument has no effect. If None, the blocking is set True. Default: None.

        Returns:
            self

        Examples:
            .. code-block:: python

                # required: skip
                import paddle

                linear=paddle.nn.Linear(2, 2)
                linear.weight
                #Parameter containing:
                #Tensor(shape=[2, 2], dtype=float32, place=CUDAPlace(0), stop_gradient=False,
                #       [[-0.32770029,  0.38653070],
                #        [ 0.46030545,  0.08158520]])

                linear.to(dtype='float64')
                linear.weight
                #Tenor(shape=[2, 2], dtype=float64, place=CUDAPlace(0), stop_gradient=False,
                #       [[-0.32770029,  0.38653070],
                #        [ 0.46030545,  0.08158520]])

                linear.to(device='cpu')
                linear.weight
                #Tensor(shape=[2, 2], dtype=float64, place=CPUPlace, stop_gradient=False,
                #       [[-0.32770029,  0.38653070],
                #        [ 0.46030545,  0.08158520]])
                linear.to(device=paddle.CUDAPinnedPlace(), blocking=False)
                linear.weight
                #Tensor(shape=[2, 2], dtype=float64, place=CUDAPinnedPlace, stop_gradient=False,
                #       [[-0.04989364, -0.56889004],
                #        [ 0.33960250,  0.96878713]])

        '''
        return self._to_impl(
            device=device,
            dtype=dtype,
            blocking=blocking,
            include_sublayers=True,
            floating_only=False,
        )

    def _apply(self, func, device, dtype, blocking, include_sublayers=True):
        if include_sublayers:
            for layer in self.children():
                layer._apply(func, device, dtype, blocking, include_sublayers)

        for key, param in self._parameters.items():
            if param is not None:
                with no_grad():
                    param_applied = func(param, device, dtype, blocking)

                if param.grad is not None:
                    with no_grad():
                        grad_applied = func(
                            param._grad_ivar(), device, dtype, blocking
                        )

        for key, buf in self._buffers.items():
            if buf is not None:
                self._buffers[key] = func(buf, device, dtype, blocking)

        self._dtype = dtype

    def _transform(self, t, device, dtype, blocking):
        if device is None:
            device = t.place
        if dtype is None:
            dtype = t.dtype

        if type(dtype) is not VarDesc.VarType:
            dtype = convert_np_dtype_to_dtype_(dtype)

        # 1. gpu place need to determine whether the memory is sufficient for allocation:
        if t.place.is_gpu_place():
            # for gpu, minimum memory allocation unit is 256 bytes.
            size_dtype = core.size_of_dtype(dtype)
            # Note(zhangbo): Paddle GPU minimum memory allocation unit is 256 bytes, waiting_alloc_memory will comput ‘t’ occupied memory space.
            # Coefficient 1.2 is used to avoid OOM that may occur in this critical state when the memory is just enough.
            waiting_alloc_memory = (
                ((np.prod(t.shape) * size_dtype) / 256 + 1) * 256 * 1.2
            )
            gpu_memory_available = core.gpu_memory_available()
            if gpu_memory_available < waiting_alloc_memory:
                # Copy param / Tensor to cpu
                t_used = t._copy_to(
                    paddle.CPUPlace(), blocking
                )  # k-v type will error
                # Release mem of t
                t.value().get_tensor()._clear()
            else:
                t_used = t
        else:
            t_used = t

        # 2. cast param / Tensor to dtype
        if dtype is not None and dtype != t_used.dtype:
            with paddle.fluid.framework._dygraph_place_guard(
                place=t_used.place
            ):
                t_casted = t_used.cast(dtype=dtype)
        else:
            t_casted = t_used

        # 3. Copy casted cpu param / Tensor to device
        if device is not None and not t_casted.place._equals(device):
            new_t = t_casted._copy_to(device, blocking)
        else:
            new_t = t_casted

        # 4. share Tensor to origin param / Tensor
        dst_tensor = t.value().get_tensor()
        src_tensor = new_t.value().get_tensor()
        dst_tensor._share_data_with(src_tensor)

        return t

    def _to_impl(
        self,
        device=None,
        dtype=None,
        blocking=None,
        include_sublayers=True,
        floating_only=False,
    ):
        '''
        Cast the parameters and buffers of Layer by the give device, dtype and blocking.

        Parameters:
            device(str|paddle.CPUPlace()|paddle.CUDAPlace()|paddle.CUDAPinnedPlace()|paddle.XPUPlace()|None, optional): The device of the Layer which want to be stored.
            If None, the device is the same with the original Tensor. If device is string, it can be ``cpu``, ``gpu:x`` and ``xpu:x``, where ``x`` is the
            index of the GPUs or XPUs. Default: None.

            dtype(str|numpy.dtype|paddle.dtype|None, optional): The type of the data. If None, the dtype is the same with the original Tensor. Default: None.

            blocking(bool|None, optional): If False and the source is in pinned memory, the copy will be
              asynchronous with respect to the host. Otherwise, the argument has no effect. If None, the blocking is set True. Default: None.

            include_sublayers(bool|True, optional): If True, deal with self and all sublayers parameters and buffers, if not only deal with self parameters and buffers. Default: True.

            floating_only(bool|False, optional): If True, only cast all floating point parameters and buffers of Layer by the give device, dtype and blocking.

        Returns:
            self

        '''

        if device is None and dtype is None and blocking is None:
            return self

        if device is not None:
            if isinstance(device, str):
                device = paddle.device._convert_to_place(device)
            elif isinstance(
                device,
                (
                    core.CPUPlace,
                    core.CUDAPlace,
                    core.CUDAPinnedPlace,
                    core.XPUPlace,
                ),
            ):
                pass
            else:
                raise ValueError(
                    "device value error, must be str, paddle.CPUPlace(), paddle.CUDAPlace(), paddle.CUDAPinnedPlace() or paddle.XPUPlace(), but the type of device is "
                    + type(device).__name__
                )

        if blocking is None:
            blocking = True
        else:
            assert isinstance(
                blocking, bool
            ), "blocking value error, must be the True, False or None"

        def transform(t, device, dtype, blocking):
            if floating_only and (not paddle.is_floating_point(t)):
                return t
            return self._transform(t, device, dtype, blocking)

        with warnings.catch_warnings():
            warnings.filterwarnings("ignore", category=UserWarning)
            self._apply(transform, device, dtype, blocking, include_sublayers)

        self._dtype = dtype
        return self

    def _startup_program(self):
        """
        Return starup program containing initialization operations of all parameters.

        NOTE(dev): This is a very low level API and only for inner developer.
        """
        startup_program = Program()
        for param in self.parameters():
            param._create_init_op(startup_program.global_block())

        return startup_program

    # [aliases] Compatible with old method names
    set_dict = set_state_dict
    load_dict = set_state_dict