- 18 9月, 2007 1 次提交
-
-
由 Wolfgang Denk 提交于
The MCC200 board config file includes version.h for some customer- specific setting, which causes warnings with "make depend"; build version.h before depend. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 16 9月, 2007 10 次提交
-
-
由 Wolfgang Denk 提交于
With recent toolchains, the environment sectors were no longer aligned to sector boundaries. The reason was a combination of two bugs: 1) common/environment.c assumed that CONFIG_TQM8xxL would be defined for all TQM8xxL and TQM8xxM boards. But "include/common.h", where this gets defined, is not included here (and cannot be included without causing lots of problems). Added a new #define CFG_USE_PPCENV for all boards which really want to put the environment is a ".ppcenv" section. 2) The linker scripts just include environment.o, silently assuming that the objects in that file are really in the order in which they are coded in the C file, i. e. "environment" first, then "redundand_environment", and "env_size" last. However, current toolchains (GCC-4.x) reorder the objects, causing the environment data not to start on a flash sector boundary: Instead of: we got: 40008000 T environment 40008000 T env_size 4000c000 T redundand_environment 40008004 T redundand_environment 40010000 T env_size 4000c004 T environment Note: this patch fixes just the first part, and cures the alignment problem by making sure that "env_size" gets placed correctly. However, we still have a potential issue because primary and redundant environment sectors are actually swapped, i. e. we have now: 40008000 T redundand_environment 4000c000 T environment 40010000 T env_size This shall be fixed in the next version. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 urwithsughosh@gmail.com 提交于
Fixup for the break statement in wrong place. [Patch by urwithsughosh@gmail.com] Acked-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Matthias Fuchs 提交于
Fix usage of do_div() in nand erase|read|write process output. The last patch to nand_util.c introduced do_div() instead of libgcc's implementation. But do_div() returns the quotient in its first macro parameter and not as result. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
-
由 Matthias Fuchs 提交于
This config option sets the default for the progress information output behavior that can also be configured through the 'quiet' environment variable. The legacy NAND code does not print the current progress info on the console. So this option is for backward compatibility for units that are in the field and where setting the quiet variable is not an option. With CFG_NAND_QUIET set to '1' the console progress info is turned off. This can still be overwritten through the environment variable. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
-
由 Liew Tsi Chung-r5aahp 提交于
Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 Liew Tsi Chung-r5aahp 提交于
Moved the #include <asm/cache.h> inside the #ifdef CONFIG_FSL_PIXIS. Signed-off-by: NTsiChungLiew <Tsi-Chung.Liew@freescale.com>
-
由 Sam Sparks 提交于
MPC834ITX*_config does not store config.tmp at the correct locatation, causing MPC8349ITXGP to have the wrong TEXT_BASE. Signed-off-by: NSam Sparks <SSparks@twacs.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Dirk Behme 提交于
As discussed in [1], DECLARE_GLOBAL_DATA_PTR has to be global and not function local. Signed-off-by: NDirk Behme <dirk.behme@gmail.com> [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/31805
-
- 14 9月, 2007 1 次提交
-
-
由 Bartlomiej Sieka 提交于
Signed-off-by: NMarian Balakowicz <m8@semihalf.com>
-
- 12 9月, 2007 1 次提交
-
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 11 9月, 2007 5 次提交
-
-
由 Grzegorz Bernacki 提交于
scan on second pci bus. Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Grzegorz Bernacki 提交于
Bamboo has a file sdram.c which needs special treatment when building in separate directory. It has to be linked to build directory otherwise it is not seen. Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Wolfgang Denk 提交于
-
由 Sean MCGOOGAN 提交于
Signed-off-by: NSean McGoogan <Sean.McGoogan@st.com> ---------------------------------------------------
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 10 9月, 2007 3 次提交
-
-
由 Grzegorz Bernacki 提交于
- convert frame size settings to be derived from a single base - set frame size to the recommended default value Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Kyungmin Park 提交于
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NMarkus Klotzbcher <mk@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
- 09 9月, 2007 3 次提交
-
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
- 08 9月, 2007 2 次提交
-
-
由 Grzegorz Bernacki 提交于
- 'pciconfighost' is set by default in order to be able to scan bridges behind the primary host/PCIe - 'pciscandelay' env variable is recognized to allow for user-controlled delay before the PCIe bus enumeration; some peripheral devices require a significant delay before they can be scanned (e.g. LSI8408E); without the delay they are not detected Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Grzegorz Bernacki 提交于
- correct configuration space mapping - correct bus numbering - better access to config space Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the first device on the first bus. We now allow to configure up to 16 buses; also, scanning for devices behind the PCIe-PCIe bridge is supported, so peripheral devices farther in hierarchy can be identified. Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
- 07 9月, 2007 14 次提交
-
-
由 Grzegorz Bernacki 提交于
Convert using fixup mechanism to suppressing MCK for the duration of config read/write transaction: while fixups work fine with the case of a precise exception, we identified a major drawback with this approach when there's an imprecise case. In this scenario there is the following race condition: the fixup is (by design) set to catch the instruction following the one actually causing the exception; if an interrupt (e.g. decrementer) happens between those two instructions, the ISR code is executed before the fixup handler the machine check is no longer protected by the fixup handler as it appears as within the ISR code. In consequence the fixup approach is being phased out and replaced with explicit suppressing of MCK during a PCIe config read/write cycle. Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Wolfgang Denk 提交于
Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Grzegorz Bernacki 提交于
When frame larger than local RX buffer is received, it is split and handled by two buffer descriptors. Prior to this patch the FEC driver discarded contents of a buffer descriptor without the 'LAST' bit set, so the first part of the frame was lost in case of larger frames. This fix allows to safely combine the two pieces into the whole frame. Signed-off-by: NGrzegorz Bernacki <gjb@semihalf.com>
-
由 Rafal Jaworowski 提交于
Signed-off-by: NRafal Jaworowski <raj@semihalf.com>
-
由 Wolfgang Denk 提交于
-
由 stefano babic 提交于
This patch add support for the Trizeps IV module (520Mhz). Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 stefano babic 提交于
This patch adds support for multiple serial ports to the PXA target. FFUART, BTUART and STUART are supported. Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 stefano babic 提交于
Code is broken for PXA270 due to "invalid lvalue in assignment". This patch fix it in pxa-regs.h Signed-off-by: NStefano Babic <sbabic@denx.de>
-
由 Jason Jin 提交于
Signed-off-by: NJason Jin <Jason.jin@freescale.com>
-
由 Shinya Kuribayashi 提交于
Stop using inline string functions on MIPS as other ARCHs do so, since the optimized inline asm versions are not small. This change is triggered by a following MIPS build error: common/libcommon.a(exports.o)(.text+0xdc): In function `jumptable_init': common/exports.c:32: undefined reference to `strcmp' make: *** [u-boot] Error 1 Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
-
由 Shinya Kuribayashi 提交于
This patches contains several bugfixes and cleanups in the latest upstream: - Don't include linux/config.h - Remove buggy inline version of memscan. - Merge with Linux 2.6.11-rc3. - Fix undefined reference to strcpy in binfmt_misc caused by gcc 3.4. - Goodbye mips64. 31704 lines of code bite the dust. - Replace extern inline with static inline. - Fix return value of strncpy. - Remove a bunch more "$1" clobbers. Signed-off-by: NShinya Kuribayashi <shinya.kuribayashi@necel.com>
-
由 Wolfgang Denk 提交于
-
由 Bartlomiej Sieka 提交于
Fix incorrect blob address calculation in do_bootm_linux() that prevents booting the kernel from a multi-file image (kernel + initrd + blob). Also, make minor updates to the U-Boot's output and to the coding style. Signed-off-by: NBartlomiej Sieka <tur@semihalf.com>
-
由 Wolfgang Denk 提交于
-