Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.

Signed-off-by: NWolfgang Denk <wd@denx.de>

board/cm5200/cmd_cm5200.c

@@ -27,7 +27,7 @@
 #include <i2c.h>
 #include <usb.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#ifdef CONFIG_CMD_BSB
 
 int do_i2c(char *argv[])
 {
@@ -445,4 +445,4 @@ U_BOOT_CMD(
 	"fkt usb\n"
 	"     - Test USB communication\n"
 );
-#endif /* CFG_CMD_BSP */
+#endif /* CONFIG_CMD_BSP */

board/pcs440ep/pcs440ep.c

@@ -879,7 +879,7 @@ int ide_preinit (void)
 }
 #endif
 
-#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+#if defined (CONFIG_CMD_IDE) && defined (CONFIG_IDE_RESET)
 void ide_set_reset (int idereset)
 {
 	debug ("ide_reset(%d)\n", idereset);
@@ -890,4 +890,4 @@ void ide_set_reset (int idereset)
 	}
 	udelay (10000);
 }
-#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+#endif /* defined (CONFIG_CMD_IDE) && defined (CONFIG_IDE_RESET) */

cpu/arm926ejs/davinci/ether.c

@@ -272,7 +272,7 @@ static int gen_auto_negotiate(int phy_addr)
 /* End of generic PHY functions */
 
 
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 static int dm644x_mii_phy_read(char *devname, unsigned char addr, unsigned char reg, unsigned short *value)
 {
 	return(dm644x_eth_phy_read(addr, reg, value) ? 0 : 1);

cpu/mpc512x/fec.c

@@ -17,10 +17,10 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define DEBUG 0
 
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
 	defined(CONFIG_MPC512x_FEC)
 
-#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
 #error "CONFIG_MII has to be defined!"
 #endif
 
@@ -626,7 +626,7 @@ int mpc512x_fec_initialize (bd_t * bis)
 	sprintf (dev->name, "FEC ETHERNET");
 	eth_register (dev);
 
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 	miiphy_register (dev->name,
 			fec512x_miiphy_read, fec512x_miiphy_write);
 #endif

cpu/mpc512x/traps.c

@@ -106,7 +106,7 @@ MachineCheckException (struct pt_regs *regs)
 		return;
 	}
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -144,7 +144,7 @@ MachineCheckException (struct pt_regs *regs)
 void
 AlignmentException (struct pt_regs *regs)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -156,7 +156,7 @@ AlignmentException (struct pt_regs *regs)
 void
 ProgramCheckException (struct pt_regs *regs)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -168,7 +168,7 @@ ProgramCheckException (struct pt_regs *regs)
 void
 SoftEmuException (struct pt_regs *regs)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -181,7 +181,7 @@ SoftEmuException (struct pt_regs *regs)
 void
 UnknownException (struct pt_regs *regs)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -190,7 +190,7 @@ UnknownException (struct pt_regs *regs)
 	_exception (0, regs);
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#ifdef CONFIG_CMD_BEDBUG
 extern void do_bedbug_breakpoint (struct pt_regs *);
 #endif
 
@@ -199,7 +199,7 @@ DebugException (struct pt_regs *regs)
 {
 	printf ("Debugger trap at @ %lx\n", regs->nip );
 	show_regs (regs);
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#ifdef CONFIG_CMD_BEDBUG
 	do_bedbug_breakpoint (regs);
 #endif
 }

include/configs/IceCube.h

@@ -85,7 +85,6 @@
 
 /* USB */
 #define CONFIG_USB_OHCI_NEW
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 #define CFG_OHCI_BE_CONTROLLER
 #undef CFG_USB_OHCI_BOARD_INIT

include/configs/TQM5200.h

@@ -131,8 +131,9 @@
 /* USB */
 #if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
 #define CONFIG_USB_OHCI_NEW
-#define ADD_USB_CMD		CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_USB
 
 #undef CFG_USB_OHCI_BOARD_INIT
 #define CFG_USB_OHCI_CPU_INIT
@@ -140,8 +141,6 @@
 #define CFG_USB_OHCI_SLOT_NAME	"mpc5200"
 #define CFG_USB_OHCI_MAX_ROOT_PORTS	15
 
-#else
-#define ADD_USB_CMD		0
 #endif
 
 #ifndef CONFIG_CAM5200

include/configs/cm5200.h

@@ -35,27 +35,22 @@
 /*
  * Supported commands
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ECHO	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_FLASH	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_DIAG	| \
-				CFG_CMD_REGINFO | \
-				CFG_CMD_SNTP	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_USB	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_JFFS2)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
 
 /*
  * Serial console configuration
@@ -344,7 +339,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#ifdef CONFIG_CMD_KGDB
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif