- 31 8月, 2008 9 次提交
-
-
由 Guennadi Liakhovetski 提交于
Based on the original S3C64XX NAND driver by Samsung for U-Boot 1.1.6. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Guennadi Liakhovetski 提交于
As noted by Harald Welte, HWFLOW support in the S3C64XX serial driver is broken and currently unused. Remove it. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Guennadi Liakhovetski 提交于
Based on the original S3C64XX UART driver by Samsung for U-Boot 1.1.6. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Guennadi Liakhovetski 提交于
Notice: USB on S3C6400 currently works _only_ with switched off MMU. One could try to enable the MMU, but map addresses 1-to-1, and disable data cache, then it should work too and we could still profit from instruction cache. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Guennadi Liakhovetski 提交于
Based on the original S3C64XX port by Samsung for U-Boot 1.1.6. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 Sandeep Paulraj 提交于
DM644x is just one of a series of DaVinci chips that use the EMAC driver. By replacing all the function names that start with dm644x_* to davinci_* we make these function more portable. I have tested this change on my EVM. DM6467 is another DaVinci SOC which uses the EMAC driver and i will be sending patches that add DaVinci DM6467 support to the list soon. Signed-off-by: NSandeep Paulraj <s-paulraj@ti.com>
-
由 Gururaja Hebbar K R 提交于
- memsetup.s is changed/merged to lowlevel_init.S memsetup.S has a global label memsetup that just returns back to caller - memsetup global label is changed/merged to lowlevel_init This label is not called from anywhere. Signed-off-by: NGururaja Hebbar <gururajakr@sanyo.co.in>
-
由 Hugo Villeneuve 提交于
ARM DaVinci: Standardize names of directories/files. Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Hugo Villeneuve 提交于
ARM DaVinci: Move common functions to board/davinci/common. Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com>
-
- 28 8月, 2008 28 次提交
-
-
由 Wolfgang Denk 提交于
-
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
-
由 Heiko Schocher 提交于
Signed-off-by: NHeiko Schocher <hs@denx.de>
-
由 Kumar Gala 提交于
For some reason we duplicated the majority of code in lib_ppc/interrupts.c not show how that happened, but there is no good reason for it. Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why they exist. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NSrikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: NDejan Minic <minic@freescale.com> Signed-off-by: NJason Jin <Jason.jin@freescale.com> Signed-off-by: NDave Liu <daveliu@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
The MPC8536 Adds SDHC and SATA controllers to the PQ3 family. We also have SERDES init code for the 8536. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NSrikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: NDejan Minic <minic@freescale.com> Signed-off-by: NJason Jin <Jason.jin@freescale.com> Signed-off-by: NDave Liu <daveliu@freescale.com>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
All 85xx boards have been converted to the new code so we can remove the old SPD DDR setup code. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Provide a helper function that board code can call to map TLBs when setting up DDR. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 27 8月, 2008 3 次提交
-
-
由 Andrew Dyer 提交于
dm9000 has code to detect and initialize external phy parts, but later on in the code the part is forced to use the internal phy unconditionally. Remove the unused/untested code. change the GPIO initialization so that only the GPIO used as an internal phy reset (hardwired in the chip) is set as an output. The remaining GPIO need to be handled by board specific code to prevent possible drive conflicts. Set as inputs for safety. replace a few magic numbers with defines Signed-off-by: NAndrew Dyer <adyer@righthandtech.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Peter Tyser 提交于
cmd_net.c command descriptions were updated to describe the optional hostIPaddr argument. The dhcp command help message was also updated to more closely reflect the other commands in cmd_net.c Signed-off-by: NPeter Tyser <ptyser@xes-inc.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Remy Bohmer 提交于
The DHCP handler has 1 state that is not listed in this case, causing a failure message when there is actually no failure. Signed-off-by: NRemy Bohmer <linux@bohmer.net> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-