- 12 6月, 2008 8 次提交
-
-
-
-
-
-
-
git://www.denx.de/git/u-boot-mpc85xx由 Wolfgang Denk 提交于
Conflicts: include/asm-ppc/fsl_lbc.h Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
-
- 11 6月, 2008 32 次提交
-
-
由 Kumar Gala 提交于
LAWs have the concept of priority so its useful to be able to allocate the lowest (highest number) priority. We will end up using this with the new DDR code. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
With the new LAW interface (set_next_law) we can move to letting the system allocate which LAWs are used for what purpose. This makes life a bit easier going forward with the new DDR code. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndy Fleming <afleming@freescale.com> Acked-by: NJon Loeliger <jdl@freescale.com> Acked-by: NBecky Bruce <becky.bruce@freescale.com>
-
由 Kumar Gala 提交于
Make it so we keep track of which LAWs have allocated and provide a function (set_next_law) which can allocate a LAW for us if one is free. In the future we will move to doing more "dynamic" LAW allocation since the majority of users dont really care about what LAW number they are at. Also, add CONFIG_MPC8540 or CONFIG_MPC8560 to those boards which needed them Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Kumar Gala 提交于
A number of board ports have empty version of board_early_init_f for no reason since we control its via CONFIG_BOARD_EARLY_INIT_F. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
* Enable flash progress * remove CLEAR_LAW0 since we dont really use it Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
Remove unused and unconfigured DDR test code from FSL 85xx boards. Besides, other common code exists. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-of-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Sergei Poselenov 提交于
Signed-off-by: NSergei Poselenov <sposelenov@emcraft.com>
-
由 Wolfgang Grandegger 提交于
Some TQM85xx boards could be equipped with up to 1 GiB (NOR) Flash memory. The current memory map only supports up to 128 MiB Flash. This patch adds the configuration option CONFIG_TQM_BIGFLASH. If set, up to 1 GiB flash is supported. To achieve this, the memory map has to be adjusted in great parts (for example the CCSRBAR is moved from 0xE0000000 to 0xA0000000). If you want to boot Linux with CONFIG_TQM_BIGFLASH set, the new memory map also has to be considered in the kernel (changed CCSRBAR address, changed PCI IO base address, ...). Please use an appropriate Flat Device Tree blob (tqm8548.dtb). Signed-off-by: NMartin Krause <martin.krause@tqs.de> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
This patch adds support for NAND FLASH on the TQM8548. It is disabled by default and can be enabled for the TQM8548 modules. It is now based on the re-written FSL NAND UPM driver. A patch has been posted earlier today with the subject: "NAND FSL UPM: driver re-write using the hwcontrol callback" Note that the R/B pin is not supported by that module requiring to use the specified maximum delay time. Note: With NAND support enabled the size of the U-Boot image exceeds 256 KB and TEXT_BASE must therefore be set to 0xfff80000 in config.mk, doubling the image size :-(. Signed-off-by: NThomas Waehner <thomas.waehner@tqs.de> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
This patch adds support for PCI express cards. The board support now uses common FSL PCI init code, for both, PCI and PCIe on all TQM85xx modules. Signed-off-by: NThomas Waehner <thomas.waehner@tqs.de> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
This patch adds basic support for the TQM8548 module from TQ-Components (http://www.tqc.de/) including DDR2 SDRAM initialisation and support for eTSEC 3 and 4 Furthermore Flash buffer write has been enabled to speed up output to the Flash by approx. a factor of 10. Signed-off-by: NThomas Waehner <thomas.waehner@tqs.de> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
This patch adds support for Linux kernels using the Flat Device Tree. It also re-defines the default environment settings for booting Linux with the FDT blob. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
This patch adds initialization of the UPMC RAM to support up to two Intel 82527 compatible CAN controller on the TQM85xx modules. Signed-off-by: NThomas Waehner <thomas.waehner@tqs.de> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
The CS0_BNDS register is now set according to the detected memory size. Signed-off-by Martin Krause <martin.krause@tqs.de>
-
由 Wolfgang Grandegger 提交于
This patch fixes the re-calculation of the automatic chip select configuration for boards with two populated FLASH banks. Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Wolfgang Grandegger 提交于
The 'N' type Spansion flashes (S29GLxxxN series) have bigger sectors, than the formerly used 'M' types (S29GLxxxM series), so the flash layout needs to be changed -> new start address of the environment. The macro definition CONFIG_TQM_FLASH_N_TYPE is undefined by default and must be defined for boards with 'N' type flashes. Signed-off-by: NMartin Krause <martin.krause@tqs.de> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
Do not configure port pins PD30/PD31 as SCC1 TxD/RxD except for the TQM8560 board. On the other TQM85xx boards (TQM8541 and TQM8555) SCC1 is not used as serial interface anyway. Worse, on some board variants configuring the pins for SCC1 leads to short circuits (for example on the TQM8541-BG). Signed-off-by: NMartin Krause <martin.krause@tqs.de>
-
由 Wolfgang Grandegger 提交于
Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Gerald Van Baren 提交于
The working_fdt pointer was declared in common/fdt_support.c but was not used there. Move it to common/cmd_fdt.c where it is used (it is also used in lib_ppc/bootm.c). Signed-off-by: NGerald Van Baren <vanbaren@cideas.com>
-
由 Kim Phillips 提交于
differentiate with local variables of the same name by renaming the global 'fdt' variable 'working_fdt'. Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
-
由 Andy Fleming 提交于
The submitted patch seems to have been more up-to-date, but an older patch was already in the repository. This patch encompasses the differences Taken entirely from Sergei Poselenov <sposelenov@emcraft.com> Signed-off-by: NAndy Fleming <afleming@freescale.com>
-
由 Wolfgang Grandegger 提交于
This is a re-write of the NAND FSL UPM driver using the more universal hwcontrol callback (instead of the cmdfunc callback). Here is a brief list of furher modifications: - For the time being, the UPM setup writing the UPM array has been removed from the driver and must now be done by the board specific code. - The bus width definition in "struct fsl_upm_nand" is now in bits to comply with the corresponding Linux driver and 8, 16 and 32 bit accesses are supported. - chip->dev_read is only set if fun->dev_ready != NULL, which is required for boards not connecting the R/B pin. - A few issue have been fixed with MxMR bit manipulation like in the corresponding Linux driver. Note: I think the "io_addr" field of "struct fsl_upm" could be removed as well, because the address is already determined by "nand->IO_ADDR_[RW]", but I'm not 100% sure. This patch has been tested on a TQM8548 modules with the NAND chip Micron MT29F8G08FABWP. This patch is based on the following patches posted to this list a few minutes ago: PPC: add accessor macros to clear and set bits in one shot 83xx/85xx/86xx: add more MxMR local bus definitions Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Acked-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
-
由 Wolfgang Grandegger 提交于
The boot output is now aligned poperly with other boot output lines, e.g.: FLASH: 128 MB L2: 512 KB enabled Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
PPC: add accessor macros to clear and set bits in one shot This patch adds macros from linux/include/asm-powerpc/io.h to clear and set bits in one shot using the in_be32, out_be32, etc. accessor functions. They are very handy to manipulate bits it I/O registers. This patch is required for my forthcoming FSL NAND UPM driver re-write and the support for the TQM8548 module. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
Move all TQM board directories to the vendor specific directory "tqc" for modules from TQ-Components GmbH (http://www.tqc.de). Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Wolfgang Grandegger 提交于
83xx/85xx/86xx: add more MxMR local bus definitions This patch adds more macro definitions for the UPM Machine Mode Registers They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx common local bus definitions into include/asm-ppc/fsl_lbc.h. They are required for my forthcoming FSL NAND UPM driver re-write and the support for the TQM8548 module. This patch is based on the following two patches from Anton Vorontsov: http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html I leave coding style violation fixes, code beautification and name corrections to somebody else ;-(. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-