- 04 11月, 2006 10 次提交
-
-
由 Ben Warren 提交于
Hello, Attached is a patch providing support for multiple I2C buses at the command level. The second part of the patch includes an implementation for the MPC834x CPU and MPC8349EMDS board. /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ Signed-off-by: NBen Warren <bwarren@qstreams.com> Overview: 1. Include new 'i2c' command (based on USB implementation) using CONFIG_I2C_CMD_TREE. 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that the commands to change bus number and speed are only available under the new 'i2c' command mentioned in the first bullet. 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form of an array of bus-device pairs. Otherwise, it is an array of uchar. CHANGELOG: Added new 'i2c' master command for all I2C interaction. This is conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for setting I2C bus speed as well as changing the active bus if the board has more than one (conditionally compiled with CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. Updated README. regards, Ben
-
由 Timur Tabi 提交于
CHANGELOG: * Errata DDR6, which affects all current MPC 834x processors, lists changes required to maintain compatibility with various types of DDR memory. This patch implements those changes. Signed-off-by: NTimur Tabi <timur@freescale.com>
-
由 Timur Tabi 提交于
-
由 Timur Tabi 提交于
CHANGELOG: * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access window registers, instead of using a hard-coded value of 8MB. Signed-off-by: NTimur Tabi <timur@freescale.com>
-
由 Tanya Jiang 提交于
Unified TQM834x variable names with 83xx and consolidated macro in preparation for the 8360 and other upcoming 83xx devices. Signed-off-by: NTanya Jiang <tanya.jiang@freescale.com>
-
由 Dave Liu 提交于
Incorporated the common unified variable names and the changes in preparation for releasing mpc8360 patches. Signed-off-by: NDave Liu <daveliu@freescale.com>
-
由 Tanya Jiang 提交于
Make pci build for mpc8349emds Signed-off-by: NTanya Jiang <tanya.jiang@freescale.com>
-
由 Tanya Jiang 提交于
Removed unused file resetvec.S for mpc83xx cpu Signed-off-by: NTanya Jiang <tanya.jiang@freescale.com>
-
由 Nick Spence 提交于
This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is defined and the write crosses a block boundary. The pointer to the verification buffer (bufstart) is not being updated to reflect the starting of the new block so the verification of the second block fails. CHANGELOG: * Fix NAND FLASH page verification across block boundaries
-
由 Nick Spence 提交于
Added a phy initialization to adjust the RGMII RX and TX timing Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode Signed-off-by: NNick Spence <nick.spence@freescale.com>
-
- 03 11月, 2006 1 次提交
-
-
由 Wolfgang Denk 提交于
-
- 02 11月, 2006 1 次提交
-
-
由 Wolfgang Denk 提交于
-
- 01 11月, 2006 4 次提交
-
-
由 Bartlomiej Sieka 提交于
- add watchdog support - enable GPIO_WKUP_7 pin for input - code cleanup
-
由 Bartlomiej Sieka 提交于
* remove warnings when compiling ethaddr.c * adjust linker script (fixes a crash resulting from incorrect definition of __u_boot_cmd_start) - Some MarelV38B code cleanup.
-
由 Bartlomiej Sieka 提交于
MPC5XXX_WU_GPIO_DATA macro to MPC5XXX_WU_GPIO_DATA_O (per MPC5200 User's Manual). Replace the uses of MPC5XXX_WU_GPIO_DATA with MPC5XXX_WU_GPIO_DATA_O for affected boards. - Add defintions for some MPC5XXX GPIO pins.
-
由 Bartlomiej Sieka 提交于
-
- 29 10月, 2006 2 次提交
-
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
- 28 10月, 2006 8 次提交
-
-
由 Stefan Roese 提交于
Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of numbers in code. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
chpart, nboot and NAND subsystem related commands now accept also partition name to specify offset. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
Make sure the string passed as variable name does not contain a '=' character. This not only prevents the common error or typing "setenv foo=bar" instead of "setenv foo bar", but (more importantly) also closes a backdoor which allowed to delete write-protected environment variables, for example by using "setenv ethaddr=".
-
由 Wolfgang Denk 提交于
-
- 27 10月, 2006 5 次提交
-
-
由 Haavard Skinnemoen 提交于
When passing the -g option to gcc, gcc automatically selects a suitable --g<format> option to pass on to the assembler. Thus, there's no point in forcing a specific debug option on the assembler using the -Wa mechanism. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
由 Jon Loeliger 提交于
Signed-off-by: NJon Loeliger <jdl@freescale.com>
-
由 Wolfgang Denk 提交于
-
由 Ben Warren 提交于
to a TSEC (e.g. a switch is connected via RMII) or if the PHY is defective/incorrectly configured. Signed-off-by: NBen Warren <bwarren@qstreams.com>
-
由 Ben Warren 提交于
to a TSEC (e.g. a switch is connected via RMII) or if the PHY is defective/incorrectly configured. Signed-off-by: NBen Warren <bwarren@qstreams.com>
-
- 26 10月, 2006 3 次提交
-
-
由 Wolfgang Denk 提交于
-
由 Haavard Skinnemoen 提交于
Add atstk1002_config target to Makefile and move the AVR32 section down below Blackfin so that it doesn't end up in the middle of MIPS. Drop the autogenerated linker script thing for now. Will have to revisit how to handle chips with different flash and RAM layout later. Signed-off-by: NHaavard Skinnemoen <hskinnemoen@atmel.com>
-
- 25 10月, 2006 4 次提交
-
-
由 Kumar Gala 提交于
If a Multi-Image file contains a third image we try to use it as a device tree. The device tree image is assumed to be uncompressed in the image file. We automatically allocate space for the device tree in memory and provide an 8k pad to allow more than a reasonable amount of growth. Additionally, a device tree that was contained in flash will now automatically get copied to system memory as part of boot. Previously an error was reported if one tried to boot a device tree that was in flash. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Denk 提交于
Merge with /home/sr/git/u-boot/4xx-idcr
-
由 Wolfgang Denk 提交于
(use "make CHANGELOG" to update it from time to time)
-
由 Stefan Roese 提交于
Patch by Stefan Roese, 24 Oct 2006
-
- 24 10月, 2006 2 次提交
-
-
由 Wolfgang Denk 提交于
-
由 Wolfgang Denk 提交于
(Conflicts between Jon Loeliger's and Matthew McClintock's tree were resolved by in favour of Jon's version.)
-