提交 4653f91c 编写于 作者: B Ben Warren 提交者: Wolfgang Denk

Fix TSEC driver (now for real): avoid crashes if PHY is not attached

to a TSEC (e.g. a switch is connected via RMII) or
if the PHY is defective/incorrectly configured.
Signed-off-by: NBen Warren <bwarren@qstreams.com>
上级 b985b5d6
......@@ -313,7 +313,8 @@ static int init_phy(struct eth_device *dev)
* PHY */
curphy = get_phy_info(dev);
if (NULL == curphy) {
if (curphy == NULL) {
priv->phyinfo = NULL;
printf("%s: No PHY found\n", dev->name);
return 0;
......@@ -661,7 +662,8 @@ static void startup_tsec(struct eth_device *dev)
rtx.txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
/* Start up the PHY */
phy_run_commands(priv, priv->phyinfo->startup);
if(priv->phyinfo)
phy_run_commands(priv, priv->phyinfo->startup);
adjust_link(dev);
/* Enable Transmit and Receive */
......@@ -765,7 +767,8 @@ static void tsec_halt(struct eth_device *dev)
regs->maccfg1 &= ~(MACCFG1_TX_EN | MACCFG1_RX_EN);
/* Shut down the PHY, as needed */
phy_run_commands(priv, priv->phyinfo->shutdown);
if(priv->phyinfo)
phy_run_commands(priv, priv->phyinfo->shutdown);
}
struct phy_info phy_info_M88E1011S = {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册