The "filesize" environment variable shall be read only when relevant
file is read.
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

Support for ext4 file system handling at DFU.
Signed-off-by: NLukasz Majewski <l.majewski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

Update Makefile change for LIBS -> LIBS-y change.

Conflicts:
	Makefile
Signed-off-by: NTom Rini <trini@ti.com>

DMA buffer cache invalidation requires that buffers have cache-aligned
buffer locations and sizes. Use memalign() and ALLOC_CACHE_ALIGN_BUFFER()
to ensure this.

On Tegra at least, without this fix, the following fail commands fail in
u-boot-master/ext4, but succeeded at the branch's branch point in
u-boot/master. With this fix, the commands work again:

ext2ls mmc 0:1 /
ext2load mmc 0:1 /boot/zImage

Cc: Uma Shankar <uma.shankar@samsung.com>
Cc: Manjunatha C Achar <a.manjunatha@samsung.com>
Cc: Iqbal Shareef <iqbal.ams@samsung.com>
Cc: Hakgoo Lee <goodguy.lee@samsung.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Tom Rini <trini@ti.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>

originally work by Jate Sujjavanich <jsujjavanich@syntech-fuelmaster.com>
----
The defines in arch/m68k/include/coldfire/flexbus.h are not compatible with
the 5235 processor. The registers in struct fbcs are different sizes from
those in the 5235. Also, the defines are a little different.

This is what I have so far. Comments?
----

Reformat the patch manually by Jason Jin
Signed-off-by: NJate Sujjavanich <jsujjavanich@syntech-fuelmaster.com>
Signed-off-by: NJason Jin <Jason.jin@freescale.com>

This patch adds a driver for Freescale Colfire Queued SPI bus.
Coded to work with 8 bits per transfer to use with SPI flash.
CPOL, CPHA, and CS_ACTIVE_HIGH can be configured.

Tested with MCF5270 which have 4 chip selects.

Activate by #define CONFIG_CF_QSPI in board config.
Signed-off-by: NRichard Retanubun <richardretanubun@ruggedcom.com>

Signed-off-by: NAlison Wang <b18965@freescale.com>

Signed-off-by: NAlison Wang <b18965@freescale.com>

Signed-off-by: NAlison Wang <b18965@freescale.com>

Signed-off-by: NAlison Wang <b18965@freescale.com>

Signed-off-by: NAlison Wang <b18965@freescale.com>

Signed-off-by: NAlison Wang <b18965@freescale.com>

Signed-off-by: NAlison Wang <b18965@freescale.com>

This patch uses the general ffs definition to replace the
platform ffs definition.

This patch also fixes the build error by adding hweightN
definition for m5329evb and m5373evb.
Signed-off-by: NJason Jin <Jason.jin@freescale.com>
Signed-off-by: NAlison Wang <b18965@freescale.com>

This patch fixes the build error for MCF537x. As the NANDFLASH_SIZE is
redefined in boards.cfg, it is needed to rename NANDFLASH_SIZE into
CONFIG_NANDFLASH_SIZE in include/configs/M5373EVB.h.
Signed-off-by: NAlison Wang <b18965@freescale.com>

Add support for the onboard eSDHC MMC controller. The hardware on the
MPC8308RDB has the following errata:

- ESDHC111: manual asynchronous CMD12 is broken
- DMA is broken (PIO works)
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>

[added include fsl_esdhc header to prevent implicit declarations of
fsl_esdhc_mmc_init() and fdt_fixup_esdhc()]
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

This is very useful on a modern system.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

The SPI pins are routed to header J8 for testing SPI functionality. A
Spansion flash has been wired up and tested on this header.

This patch breaks support for the second TSEC interface, since the GPIO
pin used as a chip select is pinmuxed with some of the TSEC pins.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

The MPC8308RDB Reference Manual states that no bits in the SPMODE
register are allowed to change while the enable (EN) bit is set.

This driver changes the character length bits (LEN) while the enable
(EN) bit is set. Clearing the EN bit while changing the LEN bits makes
the driver work correctly on MPC8308RDB.
Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>

With:
fatls mmc 0 /dir/file
dir: regular directory
file: regular file

The previous code read the contents of file as if it were directory entries to
list. This patch refuses to list file contents as if it were a folder.
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>

When variables explicitly specified on the command line are not present
in the imported env, delete them from the running env.
If the variable is also missing from the running env, issue a warning.
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

Change the syntax (user API) for "env default":
  -f: override write-once variables
  var... : accept individual variable(s)
  -a: all (resetting the whole env is NOT the default behavior)

Enable variable checking and make changes effective by
enabling do_apply argument to himport_r().
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>

Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

Change hashtable so that a callback function will decide whether a
variable can be overwritten, and possibly apply the changes.

So add a new field to struct hsearch_data:

 o "apply" callback function to check whether a variable can be
    overwritten, and possibly immediately apply the changes;
    when NULL, no check is performed.

And a new argument to himport_r():
 o "do_apply": whether to call the apply callback function

NOTE: This patch does not change the current behavior.
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

Add 2 new arguments to himport_r():

 o "nvars", "vars": number and list of variables to take into account
   (0 means ALL)

NOTE: This patch does not change the current behaviour.
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

The logic of checking special parameters (e.g. baudrate, stdin, stdout,
for a valid value and/or whether can be overwritten) and applying the
new value to the running system is now all within a single function
env_check_apply() which can be called whenever changes are made
to the environment, no matter if by set, default or import.

With this patch env_check_apply() is only called by "env set",
retaining previous behavior.
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

iomux_doenv() can only return 0 or 1.
So there is no need to save its return value in variable i, as checking
its truth value within an if statement is enough.
Signed-off-by: NGerlando Falauto <gerlando.falauto@keymile.com>
Reviewed-by: NMarek Vasut <marex@denx.de>

Commit 5e724ca2 did the same thing for env_common and env_embedded, but forgot
fw_env.
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>

The ethprime env var was missing from env_common.
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>

Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Cc: Wolfgang Denk <wd@denx.de>
Acked-by: NMike Frysinger <vapier@gentoo.org>

The original memory sizing code in get_ram_size clobbers the word
at the base address, but forgets to restore it.
Signed-off-by: NIwo Mergler <Iwo.Mergler@netcommwireless.com>

The third parameter to ALLOC_CACHE_ALIGN_BUFFER is not size (as named),
but rather count (number of elements of the type to allocate). The
current code ends up allocating one copy of env_t for each byte in its
size, which quite possibly ends up overflowing RAM.

This fixes a bug in commit 3801a15f "env_nand: align NAND buffers".
Reported-by: NPrabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Reported-by: NPrabhakar Lad <prabhakar.lad@ti.com>

This board is the only board that still sticks to OneNAND IPL.
Remove this board, since we have SPL around for a while and
OneNAND is well supported in the SPL framework. The board can
be revived if necessary.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tom Rini <trini@ti.com>

After removing the Apollon board, remove the OneNAND IPL too.
There are no users for it any more.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Minkyu Kang <promsoft@gmail.com>
Cc: Tom Rini <trini@ti.com>
Acked-by: NMinkyu Kang <mk7.kang@samsung.com>

Remove linker command line options from the SPL makefile
that force the inclusion of unreferenced command code from
linked object files. As commands are not used in the SPL,
these options resulted in an unnecessary increase in the
image size, in addition to introducing the possibility of
tricky link errors in the case where the command code
contained symbols that were not resolved by linking in the
limited objects compiled in the SPL build.
Signed-off-by: NTyler Olmstead <tyler.j.olmstead@gmail.com>
Acked-by: NTom Rini <trini@ti.com>

Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: u-boot-dm@lists.denx.de

cmd_bdinfo.c: In function ‘do_bdinfo’:
cmd_bdinfo.c:220:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
cmd_bdinfo.c:222:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
cmd_bdinfo.c:224:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
cmd_bdinfo.c:226:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
cmd_bdinfo.c:228:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat]
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: u-boot-dm@lists.denx.de

greth.c: In function ‘greth_recv’:
greth.c:507:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘unsigned int’ [-Wformat]
greth.c:507:3: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ [-Wformat]
greth.c:541:6: warning: pointer targets in assignment differ in signedness [-Wpointer-sign]
greth.c: In function ‘greth_initialize’:
greth.c:623:2: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]
greth.c:655:3: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]
greth.c:684:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 2 has type ‘struct greth_regs *’ [-Wformat]
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@gmail.com>
Cc: Daniel Hellstrom <daniel@gaisler.com>
Cc: u-boot-dm@lists.denx.de

In board_nand_init() we only need the 'tmp' variable if MXC_NFC_V2_1 is
defined.
Signed-off-by: NTom Rini <trini@ti.com>