Merge branch 'ext4'

Update Makefile change for LIBS -> LIBS-y change.

Conflicts:
	Makefile
Signed-off-by: NTom Rini <trini@ti.com>

Makefile

@@ -242,9 +242,15 @@ LIBS-y += arch/arm/cpu/ixp/npe/libnpe.o
 endif
 LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
 LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS-y += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \
-	fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \
-	fs/ubifs/libubifs.o fs/zfs/libzfs.o
+LIBS-y += fs/cramfs/libcramfs.o \
+	fs/ext4/libext4fs.o \
+	fs/fat/libfat.o \
+	fs/fdos/libfdos.o \
+	fs/jffs2/libjffs2.o \
+	fs/reiserfs/libreiserfs.o \
+	fs/ubifs/libubifs.o \
+	fs/yaffs2/libyaffs2.o \
+	fs/zfs/libzfs.o
 LIBS-y += net/libnet.o
 LIBS-y += disk/libdisk.o
 LIBS-y += drivers/bios_emulator/libatibiosemu.o

common/Makefile

@@ -86,7 +86,13 @@ COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o
 COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o
 COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o
 COBJS-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o
+COBJS-$(CONFIG_CMD_EXT4) += cmd_ext4.o
 COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
+ifdef CONFIG_CMD_EXT4
+COBJS-y	+= cmd_ext_common.o
+else
+COBJS-$(CONFIG_CMD_EXT2) += cmd_ext_common.o
+endif
 COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
 COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o
 COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o

common/cmd_ext2.c

 /*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+
  * (C) Copyright 2004
  * esd gmbh <www.esd-electronics.com>
  * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
@@ -33,224 +38,34 @@
  * Ext2fs support
  */
 #include <common.h>
-#include <part.h>
-#include <config.h>
-#include <command.h>
-#include <image.h>
-#include <linux/ctype.h>
-#include <asm/byteorder.h>
-#include <ext2fs.h>
-#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
-#include <usb.h>
-#endif
-
-#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
-#error DOS or EFI partition support must be selected
-#endif
-
-/* #define	EXT2_DEBUG */
-
-#ifdef	EXT2_DEBUG
-#define	PRINTF(fmt,args...)	printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
+#include <ext_common.h>
 
 int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	char *filename = "/";
-	int dev=0;
-	int part=1;
-	char *ep;
-	block_dev_desc_t *dev_desc=NULL;
-	int part_length;
-
-	if (argc < 3)
-		return CMD_RET_USAGE;
-
-	dev = (int)simple_strtoul (argv[2], &ep, 16);
-	dev_desc = get_dev(argv[1],dev);
-
-	if (dev_desc == NULL) {
-		printf ("\n** Block device %s %d not supported\n", argv[1], dev);
-		return 1;
-	}
-
-	if (*ep) {
-		if (*ep != ':') {
-			puts ("\n** Invalid boot device, use `dev[:part]' **\n");
-			return 1;
-		}
-		part = (int)simple_strtoul(++ep, NULL, 16);
-	}
-
-	if (argc == 4)
-		filename = argv[3];
-
-	PRINTF("Using device %s %d:%d, directory: %s\n", argv[1], dev, part, filename);
-
-	if ((part_length = ext2fs_set_blk_dev(dev_desc, part)) == 0) {
-		printf ("** Bad partition - %s %d:%d **\n",  argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	if (!ext2fs_mount(part_length)) {
-		printf ("** Bad ext2 partition or disk - %s %d:%d **\n",  argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	if (ext2fs_ls (filename)) {
-		printf ("** Error ext2fs_ls() **\n");
-		ext2fs_close();
-		return 1;
-	};
-
-	ext2fs_close();
+	if (do_ext_ls(cmdtp, flag, argc, argv))
+		return -1;
 
 	return 0;
 }
 
-U_BOOT_CMD(
-	ext2ls,	4,	1,	do_ext2ls,
-	"list files in a directory (default /)",
-	"<interface> <dev[:part]> [directory]\n"
-	"    - list files from 'dev' on 'interface' in a 'directory'"
-);
-
 /******************************************************************************
  * Ext2fs boot command intepreter. Derived from diskboot
  */
 int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	char *filename = NULL;
-	char *ep;
-	int dev, part = 1;
-	ulong addr = 0, part_length;
-	int filelen;
-	disk_partition_t info;
-	block_dev_desc_t *dev_desc = NULL;
-	char buf [12];
-	unsigned long count;
-	char *addr_str;
-
-	switch (argc) {
-	case 3:
-		addr_str = getenv("loadaddr");
-		if (addr_str != NULL)
-			addr = simple_strtoul (addr_str, NULL, 16);
-		else
-			addr = CONFIG_SYS_LOAD_ADDR;
-
-		filename = getenv ("bootfile");
-		count = 0;
-		break;
-	case 4:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = getenv ("bootfile");
-		count = 0;
-		break;
-	case 5:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = argv[4];
-		count = 0;
-		break;
-	case 6:
-		addr = simple_strtoul (argv[3], NULL, 16);
-		filename = argv[4];
-		count = simple_strtoul (argv[5], NULL, 16);
-		break;
-
-	default:
-		return CMD_RET_USAGE;
-	}
-
-	if (!filename) {
-		puts ("** No boot file defined **\n");
-		return 1;
-	}
-
-	dev = (int)simple_strtoul (argv[2], &ep, 16);
-	dev_desc = get_dev(argv[1],dev);
-	if (dev_desc==NULL) {
-		printf ("** Block device %s %d not supported\n", argv[1], dev);
-		return 1;
-	}
-	if (*ep) {
-		if (*ep != ':') {
-			puts ("** Invalid boot device, use `dev[:part]' **\n");
-			return 1;
-		}
-		part = (int)simple_strtoul(++ep, NULL, 16);
-	}
-
-	PRINTF("Using device %s%d, partition %d\n", argv[1], dev, part);
-
-	if (part != 0) {
-		if (get_partition_info (dev_desc, part, &info)) {
-			printf ("** Bad partition %d **\n", part);
-			return 1;
-		}
-
-		if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
-			printf ("** Invalid partition type \"%.32s\""
-				" (expect \"" BOOT_PART_TYPE "\")\n",
-				info.type);
-			return 1;
-		}
-		printf ("Loading file \"%s\" "
-			"from %s device %d:%d (%.32s)\n",
-			filename,
-			argv[1], dev, part, info.name);
-	} else {
-		printf ("Loading file \"%s\" from %s device %d\n",
-			filename, argv[1], dev);
-	}
-
-
-	if ((part_length = ext2fs_set_blk_dev(dev_desc, part)) == 0) {
-		printf ("** Bad partition - %s %d:%d **\n",  argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	if (!ext2fs_mount(part_length)) {
-		printf ("** Bad ext2 partition or disk - %s %d:%d **\n",
-			argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	filelen = ext2fs_open(filename);
-	if (filelen < 0) {
-		printf("** File not found %s\n", filename);
-		ext2fs_close();
-		return 1;
-	}
-	if ((count < filelen) && (count != 0)) {
-	    filelen = count;
-	}
-
-	if (ext2fs_read((char *)addr, filelen) != filelen) {
-		printf("** Unable to read \"%s\" from %s %d:%d **\n",
-			filename, argv[1], dev, part);
-		ext2fs_close();
-		return 1;
-	}
-
-	ext2fs_close();
-
-	/* Loading ok, update default load address */
-	load_addr = addr;
-
-	printf ("%d bytes read\n", filelen);
-	sprintf(buf, "%X", filelen);
-	setenv("filesize", buf);
+	if (do_ext_load(cmdtp, flag, argc, argv))
+		return -1;
 
 	return 0;
 }
 
+U_BOOT_CMD(
+	ext2ls,	4,	1,	do_ext2ls,
+	"list files in a directory (default /)",
+	"<interface> <dev[:part]> [directory]\n"
+	"    - list files from 'dev' on 'interface' in a 'directory'"
+);
+
 U_BOOT_CMD(
 	ext2load,	6,	0,	do_ext2load,
 	"load binary file from a Ext2 filesystem",

common/cmd_ext4.c

+/*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+ *
+ * Ext4fs support
+ * made from existing cmd_ext2.c file of Uboot
+ *
+ * (C) Copyright 2004
+ * esd gmbh <www.esd-electronics.com>
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * made from cmd_reiserfs by
+ *
+ * (C) Copyright 2003 - 2004
+ * Sysgo Real-Time Solutions, AG <www.elinos.com>
+ * Pavel Bartusek <pba@sysgo.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Changelog:
+ *	0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c
+ *	        file in uboot. Added ext4fs ls load and write support.
+ */
+
+#include <common.h>
+#include <part.h>
+#include <config.h>
+#include <command.h>
+#include <image.h>
+#include <linux/ctype.h>
+#include <asm/byteorder.h>
+#include <ext_common.h>
+#include <ext4fs.h>
+#include <linux/stat.h>
+#include <malloc.h>
+
+#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
+#include <usb.h>
+#endif
+
+#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
+#error DOS or EFI partition support must be selected
+#endif
+
+uint64_t total_sector;
+uint64_t part_offset;
+#if defined(CONFIG_CMD_EXT4_WRITE)
+static uint64_t part_size;
+static uint16_t cur_part = 1;
+#endif
+
+#define DOS_PART_MAGIC_OFFSET		0x1fe
+#define DOS_FS_TYPE_OFFSET		0x36
+#define DOS_FS32_TYPE_OFFSET		0x52
+
+int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc,
+						char *const argv[])
+{
+	if (do_ext_load(cmdtp, flag, argc, argv))
+		return -1;
+
+	return 0;
+}
+
+int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	if (do_ext_ls(cmdtp, flag, argc, argv))
+		return -1;
+
+	return 0;
+}
+
+#if defined(CONFIG_CMD_EXT4_WRITE)
+static int ext4_register_device(block_dev_desc_t *dev_desc, int part_no)
+{
+	unsigned char buffer[SECTOR_SIZE];
+	disk_partition_t info;
+
+	if (!dev_desc->block_read)
+		return -1;
+
+	/* check if we have a MBR (on floppies we have only a PBR) */
+	if (dev_desc->block_read(dev_desc->dev, 0, 1, (ulong *) buffer) != 1) {
+		printf("** Can't read from device %d **\n", dev_desc->dev);
+		return -1;
+	}
+	if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 ||
+	    buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) {
+		/* no signature found */
+		return -1;
+	}
+
+	/* First we assume there is a MBR */
+	if (!get_partition_info(dev_desc, part_no, &info)) {
+		part_offset = info.start;
+		cur_part = part_no;
+		part_size = info.size;
+	} else if ((strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],
+			    "FAT", 3) == 0) || (strncmp((char *)&buffer
+							[DOS_FS32_TYPE_OFFSET],
+							"FAT32", 5) == 0)) {
+		/* ok, we assume we are on a PBR only */
+		cur_part = 1;
+		part_offset = 0;
+	} else {
+		printf("** Partition %d not valid on device %d **\n",
+		       part_no, dev_desc->dev);
+		return -1;
+	}
+
+	return 0;
+}
+
+int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc,
+				char *const argv[])
+{
+	const char *filename = "/";
+	int part_length;
+	unsigned long part = 1;
+	int dev;
+	char *ep;
+	unsigned long ram_address;
+	unsigned long file_size;
+	disk_partition_t info;
+	struct ext_filesystem *fs;
+
+	if (argc < 6)
+		return cmd_usage(cmdtp);
+
+	dev = (int)simple_strtoul(argv[2], &ep, 16);
+	ext4_dev_desc = get_dev(argv[1], dev);
+	if (ext4_dev_desc == NULL) {
+		printf("Block device %s %d not supported\n", argv[1], dev);
+		return 1;
+	}
+	if (init_fs(ext4_dev_desc))
+		return 1;
+
+	fs = get_fs();
+	if (*ep) {
+		if (*ep != ':') {
+			puts("Invalid boot device, use `dev[:part]'\n");
+			goto fail;
+		}
+		part = simple_strtoul(++ep, NULL, 16);
+	}
+
+	/* get the filename */
+	filename = argv[3];
+
+	/* get the address in hexadecimal format (string to int) */
+	ram_address = simple_strtoul(argv[4], NULL, 16);
+
+	/* get the filesize in base 10 format */
+	file_size = simple_strtoul(argv[5], NULL, 10);
+
+	/* set the device as block device */
+	part_length = ext4fs_set_blk_dev(fs->dev_desc, part);
+	if (part_length == 0) {
+		printf("Bad partition - %s %d:%lu\n", argv[1], dev, part);
+		goto fail;
+	}
+
+	/* register the device and partition */
+	if (ext4_register_device(fs->dev_desc, part) != 0) {
+		printf("Unable to use %s %d:%lu for fattable\n",
+		       argv[1], dev, part);
+		goto fail;
+	}
+
+	/* get the partition information */
+	if (!get_partition_info(fs->dev_desc, part, &info)) {
+		total_sector = (info.size * info.blksz) / SECTOR_SIZE;
+		fs->total_sect = total_sector;
+	} else {
+		printf("error : get partition info\n");
+		goto fail;
+	}
+
+	/* mount the filesystem */
+	if (!ext4fs_mount(part_length)) {
+		printf("Bad ext4 partition %s %d:%lu\n", argv[1], dev, part);
+		goto fail;
+	}
+
+	/* start write */
+	if (ext4fs_write(filename, (unsigned char *)ram_address, file_size)) {
+		printf("** Error ext4fs_write() **\n");
+		goto fail;
+	}
+	ext4fs_close();
+	deinit_fs(fs->dev_desc);
+
+	return 0;
+
+fail:
+	ext4fs_close();
+	deinit_fs(fs->dev_desc);
+
+	return 1;
+}
+
+U_BOOT_CMD(ext4write, 6, 1, do_ext4_write,
+	"create a file in the root directory",
+	"<interface> <dev[:part]> [Absolute filename path] [Address] [sizebytes]\n"
+	"	  - create a file in / directory");
+
+#endif
+
+U_BOOT_CMD(ext4ls, 4, 1, do_ext4_ls,
+	   "list files in a directory (default /)",
+	   "<interface> <dev[:part]> [directory]\n"
+	   "	  - list files from 'dev' on 'interface' in a 'directory'");
+
+U_BOOT_CMD(ext4load, 6, 0, do_ext4_load,
+	   "load binary file from a Ext4 filesystem",
+	   "<interface> <dev[:part]> [addr] [filename] [bytes]\n"
+	   "	  - load binary file 'filename' from 'dev' on 'interface'\n"
+	   "		 to address 'addr' from ext4 filesystem");

common/cmd_ext_common.c

+/*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT2/4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+ *
+ * Ext4fs support
+ * made from existing cmd_ext2.c file of Uboot
+ *
+ * (C) Copyright 2004
+ * esd gmbh <www.esd-electronics.com>
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * made from cmd_reiserfs by
+ *
+ * (C) Copyright 2003 - 2004
+ * Sysgo Real-Time Solutions, AG <www.elinos.com>
+ * Pavel Bartusek <pba@sysgo.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Changelog:
+ *	0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c
+ *	        file in uboot. Added ext4fs ls load and write support.
+ */
+
+#include <common.h>
+#include <part.h>
+#include <config.h>
+#include <command.h>
+#include <image.h>
+#include <linux/ctype.h>
+#include <asm/byteorder.h>
+#include <ext_common.h>
+#include <ext4fs.h>
+#include <linux/stat.h>
+#include <malloc.h>
+
+#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
+#include <usb.h>
+#endif
+
+#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
+#error DOS or EFI partition support must be selected
+#endif
+
+#define DOS_PART_MAGIC_OFFSET		0x1fe
+#define DOS_FS_TYPE_OFFSET		0x36
+#define DOS_FS32_TYPE_OFFSET		0x52
+
+int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc,
+						char *const argv[])
+{
+	char *filename = NULL;
+	char *ep;
+	int dev;
+	unsigned long part = 1;
+	ulong addr = 0;
+	ulong part_length;
+	int filelen;
+	disk_partition_t info;
+	struct ext_filesystem *fs;
+	char buf[12];
+	unsigned long count;
+	const char *addr_str;
+
+	count = 0;
+	addr = simple_strtoul(argv[3], NULL, 16);
+	filename = getenv("bootfile");
+	switch (argc) {
+	case 3:
+		addr_str = getenv("loadaddr");
+		if (addr_str != NULL)
+			addr = simple_strtoul(addr_str, NULL, 16);
+		else
+			addr = CONFIG_SYS_LOAD_ADDR;
+
+		break;
+	case 4:
+		break;
+	case 5:
+		filename = argv[4];
+		break;
+	case 6:
+		filename = argv[4];
+		count = simple_strtoul(argv[5], NULL, 16);
+		break;
+
+	default:
+		return cmd_usage(cmdtp);
+	}
+
+	if (!filename) {
+		puts("** No boot file defined **\n");
+		return 1;
+	}
+
+	dev = (int)simple_strtoul(argv[2], &ep, 16);
+	ext4_dev_desc = get_dev(argv[1], dev);
+	if (ext4_dev_desc == NULL) {
+		printf("** Block device %s %d not supported\n", argv[1], dev);
+		return 1;
+	}
+	if (init_fs(ext4_dev_desc))
+		return 1;
+
+	fs = get_fs();
+	if (*ep) {
+		if (*ep != ':') {
+			puts("** Invalid boot device, use `dev[:part]' **\n");
+			goto fail;
+		}
+		part = simple_strtoul(++ep, NULL, 16);
+	}
+
+	if (part != 0) {
+		if (get_partition_info(fs->dev_desc, part, &info)) {
+			printf("** Bad partition %lu **\n", part);
+			goto fail;
+		}
+
+		if (strncmp((char *)info.type, BOOT_PART_TYPE,
+			    strlen(BOOT_PART_TYPE)) != 0) {
+			printf("** Invalid partition type \"%s\""
+			       " (expect \"" BOOT_PART_TYPE "\")\n", info.type);
+			goto fail;
+		}
+		printf("Loading file \"%s\" "
+		       "from %s device %d:%lu %s\n",
+		       filename, argv[1], dev, part, info.name);
+	} else {
+		printf("Loading file \"%s\" from %s device %d\n",
+		       filename, argv[1], dev);
+	}
+
+	part_length = ext4fs_set_blk_dev(fs->dev_desc, part);
+	if (part_length == 0) {
+		printf("**Bad partition - %s %d:%lu **\n", argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	if (!ext4fs_mount(part_length)) {
+		printf("** Bad ext2 partition or disk - %s %d:%lu **\n",
+		       argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	filelen = ext4fs_open(filename);
+	if (filelen < 0) {
+		printf("** File not found %s\n", filename);
+		ext4fs_close();
+		goto fail;
+	}
+	if ((count < filelen) && (count != 0))
+		filelen = count;
+
+	if (ext4fs_read((char *)addr, filelen) != filelen) {
+		printf("** Unable to read \"%s\" from %s %d:%lu **\n",
+		       filename, argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	ext4fs_close();
+	deinit_fs(fs->dev_desc);
+	/* Loading ok, update default load address */
+	load_addr = addr;
+
+	printf("%d bytes read\n", filelen);
+	sprintf(buf, "%X", filelen);
+	setenv("filesize", buf);
+
+	return 0;
+fail:
+	deinit_fs(fs->dev_desc);
+	return 1;
+}
+
+int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	const char *filename = "/";
+	int dev;
+	unsigned long part = 1;
+	char *ep;
+	struct ext_filesystem *fs;
+	int part_length;
+	if (argc < 3)
+		return cmd_usage(cmdtp);
+
+	dev = (int)simple_strtoul(argv[2], &ep, 16);
+
+	ext4_dev_desc = get_dev(argv[1], dev);
+
+	if (ext4_dev_desc == NULL) {
+		printf("\n** Block device %s %d not supported\n", argv[1], dev);
+		return 1;
+	}
+
+	if (init_fs(ext4_dev_desc))
+		return 1;
+
+	fs = get_fs();
+	if (*ep) {
+		if (*ep != ':') {
+			puts("\n** Invalid boot device, use `dev[:part]' **\n");
+			goto fail;
+		}
+		part = simple_strtoul(++ep, NULL, 16);
+	}
+
+	if (argc == 4)
+		filename = argv[3];
+
+	part_length = ext4fs_set_blk_dev(fs->dev_desc, part);
+	if (part_length == 0) {
+		printf("** Bad partition - %s %d:%lu **\n", argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	if (!ext4fs_mount(part_length)) {
+		printf("** Bad ext2 partition or disk - %s %d:%lu **\n",
+		       argv[1], dev, part);
+		ext4fs_close();
+		goto fail;
+	}
+
+	if (ext4fs_ls(filename)) {
+		printf("** Error extfs_ls() **\n");
+		ext4fs_close();
+		goto fail;
+	};
+
+	ext4fs_close();
+	deinit_fs(fs->dev_desc);
+	return 0;
+
+fail:
+	deinit_fs(fs->dev_desc);
+	return 1;
+}

doc/README.ext4

+This patch series adds support for ext4 ls,load and write features in uboot
+Journaling is supported for write feature.
+
+To Enable ext2 ls and load commands, modify the board specific config file with
+#define CONFIG_CMD_EXT2
+
+To Enable ext4 ls and load commands, modify the board specific config file with
+#define CONFIG_CMD_EXT4
+
+To enable ext4 write command, modify the board specific config file with
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
+Steps to test:
+
+1. After applying the patch, ext4 specific commands can be seen
+   in the boot loader prompt using
+        UBOOT #help
+
+        ext4load- load binary file from a Ext4 file system
+        ext4ls  - list files in a directory (default /)
+        ext4write- create a file in ext4 formatted partition
+
+2. To list the files in ext4 formatted partition, execute
+        ext4ls <interface> <dev[:part]> [directory]
+        For example:
+        UBOOT #ext4ls mmc 0:5 /usr/lib
+
+3. To read and load a file from an ext4 formatted partition to RAM, execute
+        ext4load <interface> <dev[:part]> [addr] [filename] [bytes]
+        For example:
+        UBOOT #ext4load mmc 2:2 0x30007fc0 uImage
+
+4. To write a file to a ext4 formatted partition.
+        a) First load a file to RAM at a particular address for example 0x30007fc0.
+        Now execute ext4write command
+        ext4write <interface> <dev[:part]> [filename] [Address] [sizebytes]
+        For example:
+        UBOOT #ext4write mmc 2:2 /boot/uImage 0x30007fc0 6183120
+        (here 6183120 is the size of the file to be written)
+        Note: Absolute path is required for the file to be written
+
+References :
+	-- ext4 implementation in Linux Kernel
+	-- Uboot existing ext2 load and ls implementation
+	-- Journaling block device JBD2 implementation in linux Kernel

fs/Makefile

@@ -23,7 +23,10 @@
 #
 
 subdirs-$(CONFIG_CMD_CRAMFS) := cramfs
-subdirs-$(CONFIG_CMD_EXT2) += ext2
+subdirs-$(CONFIG_CMD_EXT4) += ext4
+ifndef CONFIG_CMD_EXT4
+subdirs-$(CONFIG_CMD_EXT2) += ext4
+endif
 subdirs-$(CONFIG_CMD_FAT) += fat
 subdirs-$(CONFIG_CMD_FDOS) += fdos
 subdirs-$(CONFIG_CMD_JFFS2) += jffs2

fs/ext2/dev.c

-/*
- * (C) Copyright 2004
- *  esd gmbh <www.esd-electronics.com>
- *  Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- *
- *  based on code of fs/reiserfs/dev.c by
- *
- *  (C) Copyright 2003 - 2004
- *  Sysgo AG, <www.elinos.com>, Pavel Bartusek <pba@sysgo.com>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-
-#include <common.h>
-#include <config.h>
-#include <ext2fs.h>
-
-static block_dev_desc_t *ext2fs_block_dev_desc;
-static disk_partition_t part_info;
-
-int ext2fs_set_blk_dev(block_dev_desc_t *rbdd, int part)
-{
-	ext2fs_block_dev_desc = rbdd;
-
-	if (part == 0) {
-		/* disk doesn't use partition table */
-		part_info.start = 0;
-		part_info.size = rbdd->lba;
-		part_info.blksz = rbdd->blksz;
-	} else {
-		if (get_partition_info
-		    (ext2fs_block_dev_desc, part, &part_info)) {
-			return 0;
-		}
-	}
-	return part_info.size;
-}
-
-
-int ext2fs_devread(int sector, int byte_offset, int byte_len, char *buf)
-{
-	ALLOC_CACHE_ALIGN_BUFFER(char, sec_buf, SECTOR_SIZE);
-	unsigned sectors;
-
-	/*
-	 *  Check partition boundaries
-	 */
-	if ((sector < 0) ||
-	    ((sector + ((byte_offset + byte_len - 1) >> SECTOR_BITS)) >=
-		part_info.size)) {
-		/* errnum = ERR_OUTSIDE_PART; */
-		printf(" ** %s read outside partition sector %d\n",
-		       __func__,
-		       sector);
-		return 0;
-	}
-
-	/*
-	 *  Get the read to the beginning of a partition.
-	 */
-	sector += byte_offset >> SECTOR_BITS;
-	byte_offset &= SECTOR_SIZE - 1;
-
-	debug(" <%d, %d, %d>\n", sector, byte_offset, byte_len);
-
-	if (ext2fs_block_dev_desc == NULL) {
-		printf(" ** %s Invalid Block Device Descriptor (NULL)\n",
-		       __func__);
-		return 0;
-	}
-
-	if (byte_offset != 0) {
-		/* read first part which isn't aligned with start of sector */
-		if (ext2fs_block_dev_desc->
-		    block_read(ext2fs_block_dev_desc->dev,
-			       part_info.start + sector, 1,
-			       (unsigned long *) sec_buf) != 1) {
-			printf(" ** %s read error **\n", __func__);
-			return 0;
-		}
-		memcpy(buf, sec_buf + byte_offset,
-		       min(SECTOR_SIZE - byte_offset, byte_len));
-		buf += min(SECTOR_SIZE - byte_offset, byte_len);
-		byte_len -= min(SECTOR_SIZE - byte_offset, byte_len);
-		sector++;
-	}
-
-	/*  read sector aligned part */
-	sectors = byte_len / SECTOR_SIZE;
-
-	if (sectors > 0) {
-		if (ext2fs_block_dev_desc->block_read(
-			ext2fs_block_dev_desc->dev,
-			part_info.start + sector,
-			sectors,
-			(unsigned long *) buf) != sectors) {
-			printf(" ** %s read error - block\n", __func__);
-			return 0;
-		}
-
-		buf += sectors * SECTOR_SIZE;
-		byte_len -= sectors * SECTOR_SIZE;
-		sector += sectors;
-	}
-
-	if (byte_len != 0) {
-		/* read rest of data which are not in whole sector */
-		if (ext2fs_block_dev_desc->
-		    block_read(ext2fs_block_dev_desc->dev,
-			       part_info.start + sector, 1,
-			       (unsigned long *) sec_buf) != 1) {
-			printf(" ** %s read error - last part\n", __func__);
-			return 0;
-		}
-		memcpy(buf, sec_buf, byte_len);
-	}
-	return 1;
-}

fs/ext2/Makefile → fs/ext4/Makefile

@@ -27,15 +27,18 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	= $(obj)libext2fs.o
+LIB	= $(obj)libext4fs.o
 
 AOBJS	=
-COBJS-$(CONFIG_CMD_EXT2) := ext2fs.o dev.o
+COBJS-$(CONFIG_CMD_EXT4) := ext4fs.o ext4_common.o dev.o
+ifndef CONFIG_CMD_EXT4
+COBJS-$(CONFIG_CMD_EXT2) := ext4fs.o ext4_common.o dev.o
+endif
+COBJS-$(CONFIG_CMD_EXT4_WRITE) += ext4_journal.o crc16.o
 
 SRCS	:= $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS-y))
 
-#CPPFLAGS +=
 
 all:	$(LIB) $(AOBJS)
 

fs/ext4/crc16.c

+/*
+ *      crc16.c
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <common.h>
+#include <asm/byteorder.h>
+#include <linux/stat.h>
+#include "crc16.h"
+
+/** CRC table for the CRC-16. The poly is 0x8005 (x16 + x15 + x2 + 1) */
+static __u16 const crc16_table[256] = {
+	0x0000, 0xC0C1, 0xC181, 0x0140, 0xC301, 0x03C0, 0x0280, 0xC241,
+	0xC601, 0x06C0, 0x0780, 0xC741, 0x0500, 0xC5C1, 0xC481, 0x0440,
+	0xCC01, 0x0CC0, 0x0D80, 0xCD41, 0x0F00, 0xCFC1, 0xCE81, 0x0E40,
+	0x0A00, 0xCAC1, 0xCB81, 0x0B40, 0xC901, 0x09C0, 0x0880, 0xC841,
+	0xD801, 0x18C0, 0x1980, 0xD941, 0x1B00, 0xDBC1, 0xDA81, 0x1A40,
+	0x1E00, 0xDEC1, 0xDF81, 0x1F40, 0xDD01, 0x1DC0, 0x1C80, 0xDC41,
+	0x1400, 0xD4C1, 0xD581, 0x1540, 0xD701, 0x17C0, 0x1680, 0xD641,
+	0xD201, 0x12C0, 0x1380, 0xD341, 0x1100, 0xD1C1, 0xD081, 0x1040,
+	0xF001, 0x30C0, 0x3180, 0xF141, 0x3300, 0xF3C1, 0xF281, 0x3240,
+	0x3600, 0xF6C1, 0xF781, 0x3740, 0xF501, 0x35C0, 0x3480, 0xF441,
+	0x3C00, 0xFCC1, 0xFD81, 0x3D40, 0xFF01, 0x3FC0, 0x3E80, 0xFE41,
+	0xFA01, 0x3AC0, 0x3B80, 0xFB41, 0x3900, 0xF9C1, 0xF881, 0x3840,
+	0x2800, 0xE8C1, 0xE981, 0x2940, 0xEB01, 0x2BC0, 0x2A80, 0xEA41,
+	0xEE01, 0x2EC0, 0x2F80, 0xEF41, 0x2D00, 0xEDC1, 0xEC81, 0x2C40,
+	0xE401, 0x24C0, 0x2580, 0xE541, 0x2700, 0xE7C1, 0xE681, 0x2640,
+	0x2200, 0xE2C1, 0xE381, 0x2340, 0xE101, 0x21C0, 0x2080, 0xE041,
+	0xA001, 0x60C0, 0x6180, 0xA141, 0x6300, 0xA3C1, 0xA281, 0x6240,
+	0x6600, 0xA6C1, 0xA781, 0x6740, 0xA501, 0x65C0, 0x6480, 0xA441,
+	0x6C00, 0xACC1, 0xAD81, 0x6D40, 0xAF01, 0x6FC0, 0x6E80, 0xAE41,
+	0xAA01, 0x6AC0, 0x6B80, 0xAB41, 0x6900, 0xA9C1, 0xA881, 0x6840,
+	0x7800, 0xB8C1, 0xB981, 0x7940, 0xBB01, 0x7BC0, 0x7A80, 0xBA41,
+	0xBE01, 0x7EC0, 0x7F80, 0xBF41, 0x7D00, 0xBDC1, 0xBC81, 0x7C40,
+	0xB401, 0x74C0, 0x7580, 0xB541, 0x7700, 0xB7C1, 0xB681, 0x7640,
+	0x7200, 0xB2C1, 0xB381, 0x7340, 0xB101, 0x71C0, 0x7080, 0xB041,
+	0x5000, 0x90C1, 0x9181, 0x5140, 0x9301, 0x53C0, 0x5280, 0x9241,
+	0x9601, 0x56C0, 0x5780, 0x9741, 0x5500, 0x95C1, 0x9481, 0x5440,
+	0x9C01, 0x5CC0, 0x5D80, 0x9D41, 0x5F00, 0x9FC1, 0x9E81, 0x5E40,
+	0x5A00, 0x9AC1, 0x9B81, 0x5B40, 0x9901, 0x59C0, 0x5880, 0x9841,
+	0x8801, 0x48C0, 0x4980, 0x8941, 0x4B00, 0x8BC1, 0x8A81, 0x4A40,
+	0x4E00, 0x8EC1, 0x8F81, 0x4F40, 0x8D01, 0x4DC0, 0x4C80, 0x8C41,
+	0x4400, 0x84C1, 0x8581, 0x4540, 0x8701, 0x47C0, 0x4680, 0x8641,
+	0x8201, 0x42C0, 0x4380, 0x8341, 0x4100, 0x81C1, 0x8081, 0x4040
+};
+
+/**
+ * Compute the CRC-16 for the data buffer
+*/
+
+unsigned int ext2fs_crc16(unsigned int crc,
+	const void *buffer, unsigned int len)
+{
+	const unsigned char *cp = buffer;
+
+	while (len--)
+		crc = (((crc >> 8) & 0xffU) ^
+		       crc16_table[(crc ^ *cp++) & 0xffU]) & 0x0000ffffU;
+	return crc;
+}

fs/ext4/crc16.h

+/*
+ * crc16.h - CRC-16 routine
+ * Implements the standard CRC-16:
+ *  Width 16
+ *  Poly  0x8005 (x16 + x15 + x2 + 1)
+ *  Init  0
+ *
+ * Copyright (c) 2005 Ben Gardner <bgardner@wabtec.com>
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+#ifndef __CRC16_H
+#define __CRC16_H
+extern unsigned int ext2fs_crc16(unsigned int crc,
+	const void *buffer, unsigned int len);
+#endif

fs/ext4/dev.c

+/*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+ *
+ * made from existing ext2/dev.c file of Uboot
+ * (C) Copyright 2004
+ * esd gmbh <www.esd-electronics.com>
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * based on code of fs/reiserfs/dev.c by
+ *
+ * (C) Copyright 2003 - 2004
+ * Sysgo AG, <www.elinos.com>, Pavel Bartusek <pba@sysgo.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * Changelog:
+ *	0.1 - Newly created file for ext4fs support. Taken from
+ *		fs/ext2/dev.c file in uboot.
+ */
+
+#include <common.h>
+#include <config.h>
+#include <ext_common.h>
+
+static block_dev_desc_t *ext4fs_block_dev_desc;
+static disk_partition_t part_info;
+
+int ext4fs_set_blk_dev(block_dev_desc_t *rbdd, int part)
+{
+	ext4fs_block_dev_desc = rbdd;
+
+	if (part == 0) {
+		/* disk doesn't use partition table */
+		part_info.start = 0;
+		part_info.size = rbdd->lba;
+		part_info.blksz = rbdd->blksz;
+	} else {
+		if (get_partition_info(ext4fs_block_dev_desc,
+					part, &part_info))
+			return 0;
+	}
+	return part_info.size;
+}
+
+int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(char, sec_buf, SECTOR_SIZE);
+	unsigned block_len;
+
+	/* Check partition boundaries */
+	if ((sector < 0)
+	    || ((sector + ((byte_offset + byte_len - 1) >> SECTOR_BITS)) >=
+		part_info.size)) {
+		printf("%s read outside partition %d\n", __func__, sector);
+		return 0;
+	}
+
+	/* Get the read to the beginning of a partition */
+	sector += byte_offset >> SECTOR_BITS;
+	byte_offset &= SECTOR_SIZE - 1;
+
+	debug(" <%d, %d, %d>\n", sector, byte_offset, byte_len);
+
+	if (ext4fs_block_dev_desc == NULL) {
+		printf("** Invalid Block Device Descriptor (NULL)\n");
+		return 0;
+	}
+
+	if (byte_offset != 0) {
+		/* read first part which isn't aligned with start of sector */
+		if (ext4fs_block_dev_desc->
+		    block_read(ext4fs_block_dev_desc->dev,
+				part_info.start + sector, 1,
+				(unsigned long *) sec_buf) != 1) {
+			printf(" ** ext2fs_devread() read error **\n");
+			return 0;
+		}
+		memcpy(buf, sec_buf + byte_offset,
+			min(SECTOR_SIZE - byte_offset, byte_len));
+		buf += min(SECTOR_SIZE - byte_offset, byte_len);
+		byte_len -= min(SECTOR_SIZE - byte_offset, byte_len);
+		sector++;
+	}
+
+	if (byte_len == 0)
+		return 1;
+
+	/* read sector aligned part */
+	block_len = byte_len & ~(SECTOR_SIZE - 1);
+
+	if (block_len == 0) {
+		ALLOC_CACHE_ALIGN_BUFFER(u8, p, SECTOR_SIZE);
+
+		block_len = SECTOR_SIZE;
+		ext4fs_block_dev_desc->block_read(ext4fs_block_dev_desc->dev,
+						  part_info.start + sector,
+						  1, (unsigned long *)p);
+		memcpy(buf, p, byte_len);
+		return 1;
+	}
+
+	if (ext4fs_block_dev_desc->block_read(ext4fs_block_dev_desc->dev,
+					       part_info.start + sector,
+					       block_len / SECTOR_SIZE,
+					       (unsigned long *) buf) !=
+					       block_len / SECTOR_SIZE) {
+		printf(" ** %s read error - block\n", __func__);
+		return 0;
+	}
+	block_len = byte_len & ~(SECTOR_SIZE - 1);
+	buf += block_len;
+	byte_len -= block_len;
+	sector += block_len / SECTOR_SIZE;
+
+	if (byte_len != 0) {
+		/* read rest of data which are not in whole sector */
+		if (ext4fs_block_dev_desc->
+		    block_read(ext4fs_block_dev_desc->dev,
+				part_info.start + sector, 1,
+				(unsigned long *) sec_buf) != 1) {
+			printf("* %s read error - last part\n", __func__);
+			return 0;
+		}
+		memcpy(buf, sec_buf, byte_len);
+	}
+	return 1;
+}

fs/ext4/ext4_common.h

+/*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+ *
+ * ext4ls and ext4load :  based on ext2 ls load support in Uboot.
+ *
+ * (C) Copyright 2004
+ * esd gmbh <www.esd-electronics.com>
+ * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
+ *
+ * based on code from grub2 fs/ext2.c and fs/fshelp.c by
+ * GRUB  --  GRand Unified Bootloader
+ * Copyright (C) 2003, 2004  Free Software Foundation, Inc.
+ *
+ * ext4write : Based on generic ext4 protocol.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __EXT4_COMMON__
+#define __EXT4_COMMON__
+#include <ext_common.h>
+#include <ext4fs.h>
+#include <malloc.h>
+#include <asm/errno.h>
+#if defined(CONFIG_CMD_EXT4_WRITE)
+#include "ext4_journal.h"
+#include "crc16.h"
+#endif
+
+#define YES		1
+#define NO		0
+#define TRUE		1
+#define FALSE		0
+#define RECOVER	1
+#define SCAN		0
+
+#define S_IFLNK		0120000		/* symbolic link */
+#define BLOCK_NO_ONE		1
+#define SUPERBLOCK_SECTOR	2
+#define SUPERBLOCK_SIZE	1024
+#define F_FILE			1
+
+static inline void *zalloc(size_t size)
+{
+	void *p = memalign(ARCH_DMA_MINALIGN, size);
+	memset(p, 0, size);
+	return p;
+}
+
+extern unsigned long part_offset;
+int ext4fs_read_inode(struct ext2_data *data, int ino,
+		      struct ext2_inode *inode);
+int ext4fs_read_file(struct ext2fs_node *node, int pos,
+		unsigned int len, char *buf);
+int ext4fs_find_file(const char *path, struct ext2fs_node *rootnode,
+			struct ext2fs_node **foundnode, int expecttype);
+int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name,
+			struct ext2fs_node **fnode, int *ftype);
+
+#if defined(CONFIG_CMD_EXT4_WRITE)
+uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n);
+int ext4fs_checksum_update(unsigned int i);
+int ext4fs_get_parent_inode_num(const char *dirname, char *dname, int flags);
+void ext4fs_update_parent_dentry(char *filename, int *p_ino, int file_type);
+long int ext4fs_get_new_blk_no(void);
+int ext4fs_get_new_inode_no(void);
+void ext4fs_reset_block_bmap(long int blockno, unsigned char *buffer,
+					int index);
+int ext4fs_set_block_bmap(long int blockno, unsigned char *buffer, int index);
+int ext4fs_set_inode_bmap(int inode_no, unsigned char *buffer, int index);
+void ext4fs_reset_inode_bmap(int inode_no, unsigned char *buffer, int index);
+int ext4fs_iget(int inode_no, struct ext2_inode *inode);
+void ext4fs_allocate_blocks(struct ext2_inode *file_inode,
+				unsigned int total_remaining_blocks,
+				unsigned int *total_no_of_block);
+void put_ext4(uint64_t off, void *buf, uint32_t size);
+#endif
+#endif

fs/ext4/ext4_journal.h

+/*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+ *
+ * Journal data structures and headers for Journaling feature of ext4
+ * have been referred from JBD2 (Journaling Block device 2)
+ * implementation in Linux Kernel.
+ *
+ * Written by Stephen C. Tweedie <sct@redhat.com>
+ *
+ * Copyright 1998-2000 Red Hat, Inc --- All Rights Reserved
+ * This file is part of the Linux kernel and is made available under
+ * the terms of the GNU General Public License, version 2, or at your
+ * option, any later version, incorporated herein by reference.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __EXT4_JRNL__
+#define __EXT4_JRNL__
+
+#define EXT2_JOURNAL_INO		8	/* Journal inode */
+#define EXT2_JOURNAL_SUPERBLOCK	0	/* Journal  Superblock number */
+
+#define JBD2_FEATURE_COMPAT_CHECKSUM	0x00000001
+#define EXT3_JOURNAL_MAGIC_NUMBER	0xc03b3998U
+#define TRANSACTION_RUNNING		1
+#define TRANSACTION_COMPLETE		0
+#define EXT3_FEATURE_INCOMPAT_RECOVER	0x0004	/* Needs recovery */
+#define EXT3_JOURNAL_DESCRIPTOR_BLOCK	1
+#define EXT3_JOURNAL_COMMIT_BLOCK	2
+#define EXT3_JOURNAL_SUPERBLOCK_V1	3
+#define EXT3_JOURNAL_SUPERBLOCK_V2	4
+#define EXT3_JOURNAL_REVOKE_BLOCK	5
+#define EXT3_JOURNAL_FLAG_ESCAPE	1
+#define EXT3_JOURNAL_FLAG_SAME_UUID	2
+#define EXT3_JOURNAL_FLAG_DELETED	4
+#define EXT3_JOURNAL_FLAG_LAST_TAG	8
+
+/* Maximum entries in 1 journal transaction */
+#define MAX_JOURNAL_ENTRIES 100
+struct journal_log {
+	char *buf;
+	int blknr;
+};
+
+struct dirty_blocks {
+	char *buf;
+	int blknr;
+};
+
+/* Standard header for all descriptor blocks: */
+struct journal_header_t {
+	__u32 h_magic;
+	__u32 h_blocktype;
+	__u32 h_sequence;
+};
+
+/* The journal superblock.  All fields are in big-endian byte order. */
+struct journal_superblock_t {
+	/* 0x0000 */
+	struct journal_header_t s_header;
+
+	/* Static information describing the journal */
+	__u32 s_blocksize;	/* journal device blocksize */
+	__u32 s_maxlen;		/* total blocks in journal file */
+	__u32 s_first;		/* first block of log information */
+
+	/* Dynamic information describing the current state of the log */
+	__u32 s_sequence;	/* first commit ID expected in log */
+	__u32 s_start;		/* blocknr of start of log */
+
+	/* Error value, as set by journal_abort(). */
+	__s32 s_errno;
+
+	/* Remaining fields are only valid in a version-2 superblock */
+	__u32 s_feature_compat;	/* compatible feature set */
+	__u32 s_feature_incompat;	/* incompatible feature set */
+	__u32 s_feature_ro_compat;	/* readonly-compatible feature set */
+	/* 0x0030 */
+	__u8 s_uuid[16];	/* 128-bit uuid for journal */
+
+	/* 0x0040 */
+	__u32 s_nr_users;	/* Nr of filesystems sharing log */
+
+	__u32 s_dynsuper;	/* Blocknr of dynamic superblock copy */
+
+	/* 0x0048 */
+	__u32 s_max_transaction;	/* Limit of journal blocks per trans. */
+	__u32 s_max_trans_data;	/* Limit of data blocks per trans. */
+
+	/* 0x0050 */
+	__u32 s_padding[44];
+
+	/* 0x0100 */
+	__u8 s_users[16 * 48];	/* ids of all fs'es sharing the log */
+	/* 0x0400 */
+} ;
+
+struct ext3_journal_block_tag {
+	uint32_t block;
+	uint32_t flags;
+};
+
+struct journal_revoke_header_t {
+	struct journal_header_t r_header;
+	int r_count;		/* Count of bytes used in the block */
+};
+
+struct revoke_blk_list {
+	char *content;		/* revoke block itself */
+	struct revoke_blk_list *next;
+};
+
+extern struct ext2_data *ext4fs_root;
+
+int ext4fs_init_journal(void);
+int ext4fs_log_gdt(char *gd_table);
+int ext4fs_check_journal_state(int recovery_flag);
+int ext4fs_log_journal(char *journal_buffer, long int blknr);
+int ext4fs_put_metadata(char *metadata_buffer, long int blknr);
+void ext4fs_update_journal(void);
+void ext4fs_dump_metadata(void);
+void ext4fs_push_revoke_blk(char *buffer);
+void ext4fs_free_journal(void);
+void ext4fs_free_revoke_blks(void);
+#endif

include/ext2fs.h

-/*
- *  GRUB  --  GRand Unified Bootloader
- *  Copyright (C) 2000, 2001  Free Software Foundation, Inc.
- *
- *  (C) Copyright 2003 Sysgo Real-Time Solutions, AG <www.elinos.com>
- *  Pavel Bartusek <pba@sysgo.de>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License as published by
- *  the Free Software Foundation; either version 2 of the License, or
- *  (at your option) any later version.
- *
- *  This program is distributed in the hope that it will be useful,
- *  but WITHOUT ANY WARRANTY; without even the implied warranty of
- *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *  GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* An implementation for the Ext2FS filesystem ported from GRUB.
- * Some parts of this code (mainly the structures and defines) are
- * from the original ext2 fs code, as found in the linux kernel.
- */
-
-
-#define SECTOR_SIZE		0x200
-#define SECTOR_BITS		9
-
-/* Error codes */
-typedef enum
-{
-  ERR_NONE = 0,
-  ERR_BAD_FILENAME,
-  ERR_BAD_FILETYPE,
-  ERR_BAD_GZIP_DATA,
-  ERR_BAD_GZIP_HEADER,
-  ERR_BAD_PART_TABLE,
-  ERR_BAD_VERSION,
-  ERR_BELOW_1MB,
-  ERR_BOOT_COMMAND,
-  ERR_BOOT_FAILURE,
-  ERR_BOOT_FEATURES,
-  ERR_DEV_FORMAT,
-  ERR_DEV_VALUES,
-  ERR_EXEC_FORMAT,
-  ERR_FILELENGTH,
-  ERR_FILE_NOT_FOUND,
-  ERR_FSYS_CORRUPT,
-  ERR_FSYS_MOUNT,
-  ERR_GEOM,
-  ERR_NEED_LX_KERNEL,
-  ERR_NEED_MB_KERNEL,
-  ERR_NO_DISK,
-  ERR_NO_PART,
-  ERR_NUMBER_PARSING,
-  ERR_OUTSIDE_PART,
-  ERR_READ,
-  ERR_SYMLINK_LOOP,
-  ERR_UNRECOGNIZED,
-  ERR_WONT_FIT,
-  ERR_WRITE,
-  ERR_BAD_ARGUMENT,
-  ERR_UNALIGNED,
-  ERR_PRIVILEGED,
-  ERR_DEV_NEED_INIT,
-  ERR_NO_DISK_SPACE,
-  ERR_NUMBER_OVERFLOW,
-
-  MAX_ERR_NUM
-} ext2fs_error_t;
-
-
-extern int ext2fs_set_blk_dev(block_dev_desc_t *rbdd, int part);
-extern int ext2fs_ls (const char *dirname);
-extern int ext2fs_open (const char *filename);
-extern int ext2fs_read (char *buf, unsigned len);
-extern int ext2fs_mount (unsigned part_length);
-extern int ext2fs_close(void);

include/ext4fs.h

+/*
+ * (C) Copyright 2011 - 2012 Samsung Electronics
+ * EXT4 filesystem implementation in Uboot by
+ * Uma Shankar <uma.shankar@samsung.com>
+ * Manjunatha C Achar <a.manjunatha@samsung.com>
+ *
+ * Ext4 Extent data structures are taken from  original ext4 fs code
+ * as found in the linux kernel.
+ *
+ * Copyright (c) 2003-2006, Cluster File Systems, Inc, info@clusterfs.com
+ * Written by Alex Tomas <alex@clusterfs.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __EXT4__
+#define __EXT4__
+#include <ext_common.h>
+
+#define EXT4_EXTENTS_FL		0x00080000 /* Inode uses extents */
+#define EXT4_EXT_MAGIC			0xf30a
+#define EXT4_FEATURE_RO_COMPAT_GDT_CSUM	0x0010
+#define EXT4_FEATURE_INCOMPAT_EXTENTS	0x0040
+#define EXT4_INDIRECT_BLOCKS		12
+
+#define EXT4_BG_INODE_UNINIT		0x0001
+#define EXT4_BG_BLOCK_UNINIT		0x0002
+#define EXT4_BG_INODE_ZEROED		0x0004
+
+/*
+ * ext4_inode has i_block array (60 bytes total).
+ * The first 12 bytes store ext4_extent_header;
+ * the remainder stores an array of ext4_extent.
+ */
+
+/*
+ * This is the extent on-disk structure.
+ * It's used at the bottom of the tree.
+ */
+struct ext4_extent {
+	__le32	ee_block;	/* first logical block extent covers */
+	__le16	ee_len;		/* number of blocks covered by extent */
+	__le16	ee_start_hi;	/* high 16 bits of physical block */
+	__le32	ee_start_lo;	/* low 32 bits of physical block */
+};
+
+/*
+ * This is index on-disk structure.
+ * It's used at all the levels except the bottom.
+ */
+struct ext4_extent_idx {
+	__le32	ei_block;	/* index covers logical blocks from 'block' */
+	__le32	ei_leaf_lo;	/* pointer to the physical block of the next *
+				 * level. leaf or next index could be there */
+	__le16	ei_leaf_hi;	/* high 16 bits of physical block */
+	__u16	ei_unused;
+};
+
+/* Each block (leaves and indexes), even inode-stored has header. */
+struct ext4_extent_header {
+	__le16	eh_magic;	/* probably will support different formats */
+	__le16	eh_entries;	/* number of valid entries */
+	__le16	eh_max;		/* capacity of store in entries */
+	__le16	eh_depth;	/* has tree real underlying blocks? */
+	__le32	eh_generation;	/* generation of the tree */
+};
+
+struct ext_filesystem {
+	/* Total Sector of partition */
+	uint64_t total_sect;
+	/* Block size  of partition */
+	uint32_t blksz;
+	/* Inode size of partition */
+	uint32_t inodesz;
+	/* Sectors per Block */
+	uint32_t sect_perblk;
+	/* Group Descriptor Block Number */
+	uint32_t gdtable_blkno;
+	/* Total block groups of partition */
+	uint32_t no_blkgrp;
+	/* No of blocks required for bgdtable */
+	uint32_t no_blk_pergdt;
+	/* Superblock */
+	struct ext2_sblock *sb;
+	/* Block group descritpor table */
+	struct ext2_block_group *gd;
+	char *gdtable;
+
+	/* Block Bitmap Related */
+	unsigned char **blk_bmaps;
+	long int curr_blkno;
+	uint16_t first_pass_bbmap;
+
+	/* Inode Bitmap Related */
+	unsigned char **inode_bmaps;
+	int curr_inode_no;
+	uint16_t first_pass_ibmap;
+
+	/* Journal Related */
+
+	/* Block Device Descriptor */
+	block_dev_desc_t *dev_desc;
+};
+
+extern block_dev_desc_t *ext4_dev_desc;
+extern struct ext2_data *ext4fs_root;
+extern struct ext2fs_node *ext4fs_file;
+
+#if defined(CONFIG_CMD_EXT4_WRITE)
+extern struct ext2_inode *g_parent_inode;
+extern int gd_index;
+extern int gindex;
+
+int ext4fs_init(void);
+void ext4fs_deinit(void);
+int ext4fs_filename_check(char *filename);
+int ext4fs_write(const char *fname, unsigned char *buffer,
+				unsigned long sizebytes);
+#endif
+
+struct ext_filesystem *get_fs(void);
+int init_fs(block_dev_desc_t *dev_desc);
+void deinit_fs(block_dev_desc_t *dev_desc);
+int ext4fs_open(const char *filename);
+int ext4fs_read(char *buf, unsigned len);
+int ext4fs_mount(unsigned part_length);
+void ext4fs_close(void);
+int ext4fs_ls(const char *dirname);
+void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot);
+int ext4fs_devread(int sector, int byte_offset, int byte_len, char *buf);
+int ext4fs_set_blk_dev(block_dev_desc_t *rbdd, int part);
+long int read_allocated_block(struct ext2_inode *inode, int fileblock);
+#endif