While the Kconfig language seems to accept either form of whitespace, we
use a space throughout the project, except in these spots.
Signed-off-by: NTom Rini <trini@konsulko.com>

Rather than using CONFIG namespace for logic internal to
include/configs/astro_mcf5373l.h to select ASTRO_ID (and populate the
default environment), strip CONFIG from the various options used and
set.
Signed-off-by: NTom Rini <trini@konsulko.com>

Update the comment here to refer to PCI_CONFIG_ADDRESS rather than
CONFIG_ADDRESS.
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

The value CONFIG_ALTERA_SPI_IDLE_VAL is never re-defined by a board.
Rename this to ALTERA_SPI_IDLE_VAL.
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

This driver is currently unused.  Remove.
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

This removes a number of spots of dead code based on symbols that start
with CONFIG_[0-9] or CONFIG_A.
Signed-off-by: NTom Rini <trini@konsulko.com>

This driver uses the CONFIG namespace to set the chips internal CONFIG
namespace related bits.  However, CONFIG is reserved for the top-level
Kconfig based configuration system.  Use CFG as the namespace here
instead to avoid pollution.
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

There are an assortment of hard-coded CONFIG_BOOTCOMMAND options in some
board headers.  Rework these so that they do not add to the CONFIG
namespace.
Signed-off-by: NTom Rini <trini@konsulko.com>

Migrate CONFIG_GICV2 and CONFIG_GICV3 to Kconfig.  We still have the GIC
related registers that need to be handled more cleanly but start by
moving this symbol to Kconfig.
Signed-off-by: NTom Rini <trini@konsulko.com>

This driver uses the CONFIG namespace to set the chips internal CONFIG
namespace related bits.  However, CONFIG is reserved for the top-level
Kconfig based configuration system.  Use CFG as the namespace here
instead to avoid pollution.
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NBin Meng <bmeng.cn@gmail.com>

The platforms this code was for have been removed, drop this support
code as well.
Signed-off-by: NTom Rini <trini@konsulko.com>

These sections are no longer relevant, remove.
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>

This converts the following to Kconfig:
   CONFIG_I2C_SET_DEFAULT_BUS_NUM
   CONFIG_I2C_DEFAULT_BUS_NUMBER
Signed-off-by: NTom Rini <trini@konsulko.com>

Remove the irrelevant section from the README and remove the
non-functional SPL-undef section.
Signed-off-by: NTom Rini <trini@konsulko.com>

- As there are no boards that use different values for speed / slave on
  different buses, use a single option.
- Switch to using the common SYS_I2C_SPEED / SYS_I2C_SLAVE options.
- Introduce _HAS_ options for additional buses as only the first one is
  common to all users.
- Convert all remaining symbols to Kconfig.
Signed-off-by: NTom Rini <trini@konsulko.com>

- Migrate SYS_I2C_SH and related defines to Kconfig
- Remove currently unused SYS_I2C_SH related defines
- Cleanup related README section.

Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_I2C_MXC
   CONFIG_SYS_I2C_MXC_I2C1
   CONFIG_SYS_I2C_MXC_I2C2
   CONFIG_SYS_I2C_MXC_I2C3
   CONFIG_SYS_I2C_MXC_I2C4
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_I2C_SPEED
   CONFIG_SYS_I2C_SLAVE
Signed-off-by: NTom Rini <trini@konsulko.com>

There are no longer any cases where we are neither SYS_I2C_LEGACY nor
DM_I2C.  Remove these code paths.
Signed-off-by: NTom Rini <trini@konsulko.com>

This driver and it's only user are converted to DM_I2C, remove legacy
code.
Signed-off-by: NTom Rini <trini@konsulko.com>

The omap24xx I2C driver uses its own CONFIG namespace for common I2C
variables.  Rather than convert more of them to Kconfig, rename these to
the common I2C ones and remove the entirely unused functionality.  As
part of this, we make the am335x_shc platforms consistent with their
intended speed values.
Signed-off-by: NTom Rini <trini@konsulko.com>

On this platform, we have DM_I2C and SPL_DM_I2C always enabled.
Remove legacy options.

Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NLokesh Vutla <lokeshvutla@ti.com>

On this platform, we have DM_I2C and SPL_DM_I2C always enabled.  Remove
legacy options.
Signed-off-by: NTom Rini <trini@konsulko.com>

There are no users of more than 1 i2c bus in the non-DM case currently.
Remove the additional defines for this.
Signed-off-by: NTom Rini <trini@konsulko.com>

Convert SYS_I2C_EARLY_INIT to Kconfig, and make it depend on
SPL_SYS_I2C_LEGACY.  Remove the weak implementation as it's either
something that needs to exist for real, or shouldn't be called.
Signed-off-by: NTom Rini <trini@konsulko.com>

First, we convert CONFIG_SYS_I2C_LEGACY to Kconfig.  Next, as you cannot
have SYS_I2C_LEGACY and DM_I2C at the same time, introduce
CONFIG_SPL_SYS_I2C_LEGACY so that we can enable the legacy option only
in SPL.  Finally, for some PowerPC cases we also need
CONFIG_TPL_SYS_I2C_LEGACY support.  Convert all of the existing users to
one or more symbols.
Signed-off-by: NTom Rini <trini@konsulko.com>

Currently the legacy software i2c support is only used for a single bus.
Remove all of the extra and unused support.  Also update the README to
not reference that, and finish removing some already badly auto-edited
related text.
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_I2C_MVTWSI
Signed-off-by: NTom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_SYS_I2C_SOFT
   CONFIG_SYS_I2C_SOFT_SPEED
   CONFIG_SYS_I2C_SOFT_SLAVE
Signed-off-by: NTom Rini <trini@konsulko.com>

- Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR
  based on current usage.
- Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
  CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE
  CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS
  to Kconfig.  We move these symbols around a bit and add appropriate
  dependencies to them.  In some cases, we now add a correct default value
  as well.
Signed-off-by: NTom Rini <trini@konsulko.com>

At this point in time, there's no systems with "U-Boot environment
exists on an EEPROM which is accessed over the I2C bus" that sets this
option.  Drop it.
Signed-off-by: NTom Rini <trini@konsulko.com>

This platform defines everything needed to be able to use the
eeprom command.  In addition, board/compulab/common/eeprom.c is required
by the platform, and does not use CONFIG_ID_EEPROM to enable/disable
builing of it.  In order to migrate CONFIG symbols to Kconfig and to not
have to add complex logic to handle this case, enable CMD_EEPROM on this
board.

Cc: Uri Mashiach <uri.mashiach@compulab.co.il>
Signed-off-by: NTom Rini <trini@konsulko.com>

Finish moving this driver to Kconfig.
- Update the dependency logic for Exynos5 too
- Remove the unused CONFIG_SYS_I2C_S3C24X0_SPEED variable
- Drop CONFIG_SYS_I2C_S3C24X0_SLAVE as it's always set to 0.
- Move the internal SYS_I2C_S3C24X0_SLAVE define closer to the only user.

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NMinkyu Kang <mk7.kang@samsung.com>
Reviewed-by: NJaehoon Chung <jh80.chung@samsung.com>

This converts the following to Kconfig:
   CONFIG_ID_EEPROM
Signed-off-by: NTom Rini <trini@konsulko.com>

The instances of CONFIG_SYS_I2C_EEPROM_ADDR on these platforms doesn't
match up with the rest of the EERPOM related defines in U-Boot.  Move
these out of the CONFIG namespace rather than make complex Kconfig
logic.

Cc: Samuel Egli <samuel.egli@siemens.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>
Reviewed-by: NAnatolij Gustschin <agust@denx.de>

As the code reads now, making this code path use
CONFIG_SYS_IVM_EEPROM_ADR rather than CONFIG_SYS_I2C_EEPROM_ADDR seems
to make sense as the rest of the EEPROM infrastructure isn't used on
these platforms.

Cc: Aleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NAleksandar Gerasimovski <aleksandar.gerasimovski@hitachi-powergrids.com>

The shc platforms do not make use of the rest of the EEPROM
infrastructure.  Rather than make more elaborate Kconfig logic, remove
this setting from the CONFIG namespace.

Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Looking over the current boards, there are no users of
CONFIG_MAC_ADDR_IN_EEPROM.  Further, omapl138_lcdk uses
CONFIG_NET_RANDOM_ETHADDR.  Drop various unused code paths.

Cc: Adam Ford <aford173@gmail.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

This platform does not use any of the standard EEPROM functionality and
instead provides its own.  Use a local namespace for the I2C related
defines to access the EEPROM.

Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: NTom Rini <trini@konsulko.com>
Acked-by: NLukasz Majewski <lukma@denx.de>

This code is no longer used, remove it.
Signed-off-by: NTom Rini <trini@konsulko.com>