eeprom: Drop CONFIG_ENV_EEPROM_IS_ON_I2C usage

At this point in time, there's no systems with "U-Boot environment
exists on an EEPROM which is accessed over the I2C bus" that sets this
option.  Drop it.
Signed-off-by: NTom Rini <trini@konsulko.com>

cmd/eeprom.c

@@ -53,13 +53,12 @@
  * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
  *   0x00000nxx for EEPROM address selectors and page number at n.
  */
-#if !defined(CONFIG_SPI) || defined(CONFIG_ENV_EEPROM_IS_ON_I2C)
-#if !defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
-	(CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
-	(CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2)
+#if !defined(CONFIG_SPI) && \
+	(!defined(CONFIG_SYS_I2C_EEPROM_ADDR_LEN) || \
+		(CONFIG_SYS_I2C_EEPROM_ADDR_LEN < 1) || \
+		(CONFIG_SYS_I2C_EEPROM_ADDR_LEN > 2))
 #error CONFIG_SYS_I2C_EEPROM_ADDR_LEN must be 1 or 2
 #endif
-#endif
 
 #if CONFIG_IS_ENABLED(DM_I2C)
 static int eeprom_i2c_bus;

env/Kconfig

@@ -44,10 +44,6 @@ config ENV_IS_IN_EEPROM
 	  still be one byte because the extra address bits are hidden
 	  in the chip address.
 
-	  - CONFIG_ENV_EEPROM_IS_ON_I2C
-	  define this, if you have I2C and SPI activated, and your
-	  EEPROM, which holds the environment, is on the I2C bus.
-
 	  - CONFIG_I2C_ENV_EEPROM_BUS
 	  if you have an Environment on an EEPROM reached over
 	  I2C muxes, you can define here, how to reach this

include/configs/am335x_evm.h

@@ -168,7 +168,6 @@
 #define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
 #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 

include/configs/am335x_sl50.h

@@ -55,7 +55,6 @@
 #define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
 #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 

include/configs/am43xx_evm.h

@@ -21,7 +21,6 @@
 #endif
 
 /* I2C Configuration */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 

include/configs/am57xx_evm.h

@@ -22,7 +22,6 @@
 #define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
 
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 

include/configs/baltos.h

@@ -204,7 +204,6 @@
 #define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
 #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 

include/configs/cm_fx6.h

@@ -201,7 +201,6 @@
 #define CONFIG_VIDEO_BMP_LOGO
 
 /* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5

include/configs/cm_t335.h

@@ -128,7 +128,6 @@
 /* Status LED polarity is inversed, so init it in the "off" state */
 
 /* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5

include/configs/cm_t43.h

@@ -114,7 +114,6 @@
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 
 /* EEPROM */
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5

include/configs/dra7xx_evm.h

@@ -31,7 +31,6 @@
 #define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
 
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 

include/configs/km/km_arm.h

@@ -143,7 +143,6 @@ extern void __set_direction(unsigned pin, int high);
 #define CONFIG_ENV_TOTAL_SIZE		0x20000     /* no bracets! */
 #else
 #define CONFIG_SYS_DEF_EEPROM_ADDR	0x50
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_EEPROM_WREN
 #define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
 #endif

include/configs/ti_armv7_keystone2.h

@@ -124,7 +124,6 @@
 #define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	6
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
 
 /* NAND Configuration */
 #define CONFIG_KEYSTONE_RBL_NAND