Add support for Xilinx zcu100.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

SPL MMC boot requires to have clock early.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.
Reported-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>

This part hasn't been pushed to mainline yet that's why remove it.
The patch can be reverted in future when this is pushed there.
Reported-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>

Add psu init for zc1751 dc cards.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add psu init for zcu102-revA.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch enables the fixed link support for
all ZynqMP boards.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

There is no memory which stores mac address that's why generate it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Enable ethernet phys for zc1751 dc5.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2). This has been tested on zcu106, so
enable it in this defconfig.

To generate an image that triggers this booting flow, you need to pass
'-O arm-trusted-firmware' to mkimage.
Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Targets without net can't use pxe or dhcp boot methods.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch reads phytype from property "xlnx,phy-type" instead
od simply looking for "phy-type". This is to be inline with
Linux and also fixes the issue of detecting it wrongly in
u-boot.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

This patch uses writeq() function to enable greater than 32 bit
addressing of axi-ethernet for the ZynqMP devices.
Signed-off-by: NVipul Kumar <vipulk@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Acked-by: NJoe Hershberger <joe.hershberger@ni.com>

In commit 2453c695 ("arm64: zynqmp: nand: Fixed NAND erase issue for
size 1GiB or more"), ARASAN_NAND_MEM_ADDR1_PAGE_MASK macro changed
to 0xFFFF and the same macro is used in nand write and so that getting
nand write error.
This patch reverted this macro to the 0xFFFF0000 and used
ARASAN_NAND_MEM_ADDR1_COL_MASK in the nand erase function
which is equal to 0xFFFF.
Signed-off-by: NVipul Kumar <vipulk@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

There is delay needed after PCFG_PROGB change if
AES key source is efuse. This fixes the issue of
encrypted bitstream loading with AES efuse as key
source.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Xilfpga library expects the size of bitstream in a pointer
but currenly we are passing the size as a value. This patch
fixes this issue.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NNava kishore Manne <navam@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Latest xilfpga expects to set BIT5 of flags for nonsecure
bitsream and also expects length in bytes instead of words
This patch does the same.
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NJoe Hershberger <joe.hershberger@ni.com>

This patch adds support for ZynqMP platform to print FPGA PCAP status
for "fpga status" command.
Signed-off-by: NNitin Jain <nitinj@xilinx.com>
Signed-off-by: NSiva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

New and old clk drivers are sharing IDs and descriptions.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Sync with mainline.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

- Use eeprom for node name
- Use atmel compatible string instead of at.
- Add missing labels
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.
Signed-off-by: NJavier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

i2c muxes should described like this.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Use different location for SPDX line. Also update dates for new mainline
DTS files.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

The patch fixing issues reported by DTC:
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0x400000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0x800000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xc00000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xd00000 unit name should not have
leading "0x"
zynq-cc108.dtb: Warning (unit_address_format): Node
/amba/spi@e000d000/flash@0/partition@0xf00000 unit name should not have
leading "0x"
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

There is no reason to have double spaces for indentation.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add vendor prefix to si5341.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

There shouldn't be a number appended based on spec.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

U-Boot commands shouldn't be the part of kernel DTS files.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch adds no-1-8-v below properties to sd node for dc5 board dts.
Signed-off-by: NSrinivas Goud <srinivas.goud@xilinx.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Enable TTCs for this target as is done in Linux kernel.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

eeprom can contain information which can be used by nvmem drivers.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This changes was done in mainline and this patch is just following it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Using different node name and label partitions as data.
Also use latest compatible strings based on mainline review.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Follow spec for node names.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Instead of hardcoding numbers.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Remove additional comments which were removed as the part of upstreaming.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Mainline Linux kernel has adopted SPDX header license in a different
format then was used before. This patch is syncing it up.

Also update years in License text and remove Nathalie's email because it
is no longer valid.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Based on review from mainline i2c-mux is standard name for i2c switches.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Use vendor prefix for Maxim chips.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>