- 08 7月, 2021 12 次提交
-
-
由 Tom Rini 提交于
These boards have not been converted to CONFIG_DM_PCI by the deadline and is also missing conversion to CONFIG_DM. Remove them. Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
These boards have not been converted to CONFIG_DM_PCI by the deadline. Remove them. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Heiko Schocher <hs@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NHeiko Schocher <hs@denx.de>
-
由 Tom Rini 提交于
This board has not been converted to CONFIG_DM_PCI by the deadline. Remove it. Cc: Ilya Yanok <yanok@emcraft.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
These boards have not been converted to CONFIG_DM_PCI, CONFIG_DM_USB or in some cases CONFIG_DM itself by the deadline. Remove them. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
This board has not been converted to CONFIG_DM_MMC by the deadline. Remove it. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is the last of the mcf547x_8x family of boards, remove that support as well. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
These board has not been converted to CONFIG_DM_PCI by the deadline. Remove them. As this is all of the CONFIG_M548x platforms as well, remove that code. Cc: TsiChung Liew <Tsi-Chung.Liew@nxp.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Drop the MPC837XERDB_SLAVE configuration. Cc: Sinan Akman <sinan@writeme.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
With the ventana boards migrated to DM_PCI and DM_ETH, we can remove this prototype. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: NTom Rini <trini@konsulko.com>
-
https://source.denx.de/u-boot/custodians/u-boot-dm由 Tom Rini 提交于
various minor sandbox improvements
-
由 Tom Rini 提交于
- Update CI to use gcc-11.1 and clang-11 to build everything. This requires a few fixes to the code that these newer compilers have exposed.
-
- 07 7月, 2021 28 次提交
-
-
-
由 Tom Rini 提交于
- Move to gcc-11.1.0 builds from kernel.org for supported platforms and LLVM-11 for those tests. - As Heinrich has noted, the RISC-V platform specification has a profile OS-A for running rich operating systems like Linux and BSD. This profile requires 64bit and UEFI conforming to the EBBR. Only the 'embedded' profile may use 32bit. Given this, drop grub for 32bit RISC-V as it no longer compiles with gcc-11.1 and upstream is unlikely to fix it: https://www.mail-archive.com/grub-devel@gnu.org/msg30736.html - Update to grub-2.06 release to address other issues of building with gcc-11.1. - Update to newer Xtensa (gcc-9.2.0) and ARC (gcc-10.2) toolchains Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Cc: Rick Chen <rick@andestech.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
With x86 we can execute an option ROM either natively or using the x86 emulator (if enabled with CONFIG_BIOSEMU). Both of these share the _X86EMU_env variable, with the native code using it to hold register state during interrupt processing. At present, in 32-bit U-Boot, the variable is declared twice, once in common code and once in code only compiled with CONFIG_BIOSEMU. With GCC 11 this causes a 'multiple definitions' error on boards with CONFIG_BIOSEMU. Drop the emulator definition when CONFIG_BIOSEMU is used. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Tom Rini 提交于
When we do not have bootstage enabled, rather than include an empty dummy function, we just don't reference it. This saves us space in some tight builds. This also shows a few cases where show_boot_progress was incorrectly guarded before. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Follow what the Linux Kernel does here and disable the 'zero-length-bounds', 'array-bounds' and 'stringop-overflow' warnings here. This brings in commits 5c45de21a2223, 44720996e2d79 and 5a76021c2eff7 from the Linux Kernel. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
With gcc-11 we get a multiple errors here as the declarations for mscc_pinctrl_ops and mscc_gpio_ops are missing an extern. CC: Gregory CLEMENT <gregory.clement@bootlin.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NHoratiu Vultur <horatiu.vultur@microchip.com> Reviewed-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
-
由 Tom Rini 提交于
The board code here references the display_width / display_height variables set in the video driver, declare these as externs as gcc-11 will notice and lead to a multiple definition error. Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
In some board cpld.h files the definition of the cpld_data struct not-quite makes a typedef for cpld_data_t. This problem is caught with gcc-11 as a multiple definition error. As there are no users of this non-typedef, fix this by not declaring it one to begin with. Cc: Priyanka Jain <priyanka.jain@nxp.com> Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
With gcc-11 we see: drivers/ddr/marvell/a38x/ddr3_debug.c:672:47: error: argument 2 of type 'u32[5]' {aka 'unsigned int[5]'} with mismatched bound [-Werror=array-parameter=] 672 | int ddr3_tip_read_adll_value(u32 dev_num, u32 pup_values[MAX_INTERFACE_NUM * MAX_BUS_NUM], | ~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/ddr/marvell/a38x/ddr3_training_ip_engine.h:10, from drivers/ddr/marvell/a38x/ddr3_init.h:17, from drivers/ddr/marvell/a38x/ddr3_debug.c:6: drivers/ddr/marvell/a38x/ddr3_training_ip_flow.h:116:47: note: previously declared as 'u32[]' {aka 'unsigned int[]'} And similar warnings. Correct these by updating the prototype. Remove the prototype for ddr3_tip_read_pup_value as it is unused. Signed-off-by: NTom Rini <trini@konsulko.com>
-
https://source.denx.de/u-boot/custodians/u-boot-atmel由 Tom Rini 提交于
First set of u-boot-atmel fixes for 2021.10 cycle: This small fixes set is dedicated to fixing the onewire subsystem for the at91 boards which was broken since 2020.04.
-
由 Tianrui Wei 提交于
Previous device tree for OpenPiton emits a warning during compilation. This commit fixes the previous warning adds dts to the OpenPiton RISC-V board and added the device tree to MAINTAINER file. Signed-off-by: NTianrui Wei <tianrui-wei@outlook.com> Reported-by: NTom Rini <trini@konsulko.com> Reviewed-by: NLeo Yu-Chi Liang <ycliang@andestech.com>
-
由 Tom Rini 提交于
- mpc8379erdb DM_USB, DM_PCI and DM_ETH support. - Drop PCI support from the integrator family of boards - Add synquacer support - Assorted lpc32xx updates and improvements - snapdragon (and related) fixes, Broadcom iproc update
-
由 Stephan Gerhold 提交于
At the moment, the U-Boot serial_msm driver does not initialize the UART_DM_DMEN register with the required value. Usually this does not cause any problems, because there is Qualcomm's LK bootloader running before U-Boot which initializes the register with the correct value. It's important that this register is initialized correctly, because the U-Boot driver does not make use of the BAM/DMA or single character mode functionality of the UART controller. A different bootloader before U-Boot might initialize the register differently. For example, on DragonBoard 410c U-Boot can also be installed to the "aboot" partition (replacing LK entirely). In this case U-Boot is loaded directly by SBL, which seems to use the single-character mode for some reason. In single character mode there is always just one char in the FIFO, instead of the 4 characters expected by msm_serial_fetch(). It also causes issues with "earlycon" later in the Linux kernel, which tries to output 4 chars at once, but only the first char will be written. This causes early UART log in Linux to be corrupted like this: [ 00ano:ameoi .Q1B[ 00ac _idaM00080oo'ahani-lcle._20). 15NdNii 5 SPMSJ20:U2 [ 00rkoolmsamel [ 00Fw ]elamletopsioble [ 00ore instead of [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd030] [ 0.000000] Machine model: Qualcomm Technologies, Inc. APQ 8016 SBC [ 0.000000] earlycon: msm_serial_dm0 at MMIO 0x00000000078b0000 (options '') [ 0.000000] printk: bootconsole [msm_serial_dm0] enabled Make sure to initialize UART_DM_DMEN correctly to fix this issue when loading U-Boot directly after SBL (instead of through LK). There is no functional difference when loading U-Boot through LK since LK also initializes UART_DM_DMEN to 0x0. [1] [1]: https://git.linaro.org/landing-teams/working/qualcomm/lk.git/tree/platform/msm_shared/uart_dm.c?h=dragonboard410c-LA.BR.1.2.7-03810-8x16.0-linaro3#n203 Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: NStephan Gerhold <stephan@gerhold.net> Reviewed-by: NRamon Fried <rfried.dev@gmail.com>
-
由 Stephan Gerhold 提交于
It looks like SD card detection is broken at the moment for DB410c. The eMMC is detected correctly, but the SD card is not. This is probably similar to the issue fixed in commit 85051474 ("mmc: msm_sdhci: Use mmc_of_parse for setting host_caps") for eMMC, except that the SD card does not have a property like "non-removable" that skips the card detection. The SDHCI on DB410c cannot detect itself if a SD card is inserted, so add the necessary cd-gpios to make SD card detection work again. While at it, fix the #gpio-cells for the soc_gpios to avoid DTC warnings - the soc_gpios are actually already used with two cells for the gpio-leds so this was just wrong all the time. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: NStephan Gerhold <stephan@gerhold.net> Reviewed-by: NRamon Fried <rfried.dev@gmail.com>
-
由 Sheep Sun 提交于
Fix typo in clock-snapdragon.c Signed-off-by: NSheep Sun <sunxiaoyang2003@gmail.com>
-
由 Sheep Sun 提交于
The GICC register used by u-boot is 0x0a20c000, which is actually a GICC for WCNSS, the WLAN processor. U-boot runs on the Application Processor, therefore it should use APCS GICC instead. Hence, correct it with APCS GICC register address. Signed-off-by: NSheep Sun <sunxiaoyang2003@gmail.com>
-
由 Trevor Woerner 提交于
Enable a DMed i2c driver for the ea-lpc3250devkitv2 board. Include some sample commands/output for testing. Signed-off-by: NTrevor Woerner <twoerner@gmail.com>
-
由 Trevor Woerner 提交于
Convert the CONFIG_SYS_I2C_LPC32XX configuration symbol from an include directive to a Kconfig value. Signed-off-by: NTrevor Woerner <twoerner@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Trevor Woerner 提交于
Add the of_match/compatible string to the lpc32xx i2c driver so it works correctly with device-tree. Signed-off-by: NTrevor Woerner <twoerner@gmail.com>
-
由 Trevor Woerner 提交于
The lpc32xx driver was not obtaining the per-device base address correctly from the device tree. Fix the FIXME in order to get the correct base address. Signed-off-by: NTrevor Woerner <twoerner@gmail.com>
-
由 Trevor Woerner 提交于
The LPC32XX_I2C_STAT_DRMI is not used anywhere so remove it. Signed-off-by: NTrevor Woerner <twoerner@gmail.com>
-
由 Trevor Woerner 提交于
Add basic support for running U-Boot on the Embedded Artists LPC3250 Developer's Kit v2 board by launching U-Boot from the board's s1l loader (which comes pre-installed on the board). Signed-off-by: NTrevor Woerner <twoerner@gmail.com>
-
由 Trevor Woerner 提交于
Import the dtsi, dts, and clock binding files for the lpc32xx ea3250 board directly and unmodified from the latest Linux kernel. Signed-off-by: NTrevor Woerner <twoerner@gmail.com>
-
由 Trevor Woerner 提交于
There's nothing special or unique to the lpc32xx that requires its own config parameter for specifying the console uart index. Therefore instead of using the lpc32xx-specific CONFIG_SYS_LPC32XX_UART include parameter, use the already-available CONFIG_CONS_INDEX from Kconfig. Signed-off-by: NTrevor Woerner <twoerner@gmail.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Masami Hiramatsu 提交于
Enable EFI capsule update support. With the EFI capsule update, you can update U-Boot, TF-A and OP-TEE. TF-A and OP-TEE are usually combined as a FIP binary, but if the binary is bigger than 480KB, you have to modify FIP header, split the OP-TEE and stores the OP-TEE binary in the different place. This configuration supports both cases. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>
-
由 Masami Hiramatsu 提交于
Since the EDK2 GenerateCapsule script is out of date and it doesn't generate the supported version capsule file, the document should refer the mkeficapsule in tools. Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>
-
由 Masami Hiramatsu 提交于
Add the DeveloperBox 96boards EE support. This board is also known as Socionext SynQuacer E-Series. It contians one "SC2A11" SoC, which has 24-cores of arm Cortex-A53, and 4 DDR3 slots, 3 PCIe slots (1 4x port and 2 1x ports which are expanded via PCIe bridge chip), 2 USB 3.0 ports and 2 USB 2.0 ports, 2 SATA ports and 1 GbE, 64MB NOR flash and 8GB eMMC on standard MicroATX Form Factor. For more information, see this page; https://www.96boards.org/product/developerbox/Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>
-
由 Masami Hiramatsu 提交于
Add device trees for 96boards EE DeveloperBox and basement SynQuacer SoC dtsi. These files are imported from EDK2 commit 83d38b0b4c0f240d4488c600bbe87cea391f3922 as-is (except for the changes #include path and some macros). And add U-Boot specific changes in synquacer-sc2a11-developerbox-u-boot.dtsi Signed-off-by: NMasami Hiramatsu <masami.hiramatsu@linaro.org>
-