Convert CONFIG_SUPPORT_EMMC_RPMB to Kconfig. Split the command handling
from the underlying support and expose this through CMD_MMC_RPMB.
Signed-off-by: NAlex Kiernan <alex.kiernan@gmail.com>

- The correct way to build with thumb mode is to select SYS_THUMB_BUILD
- We should be setting -march=armv7-m in arch/arm/Makefile not the
  sub-config.mk file.
Signed-off-by: NTom Rini <trini@konsulko.com>

- Xilinx aarch64 is caught in the general xilinx arm job, exclude from
  the general aarch64 job.
- Give the generic aarch64 job a better name
- Re-sort the PowerPC jobs so that we can complete them a bit quicker.
Signed-off-by: NTom Rini <trini@konsulko.com>

Add support for gcc versions 7.3.0, 6.4.0 and 4.9.4.

Also use a regex for matching the tarball names. Some gcc versions
use '-ARCH-' instead of '_ARCH-'.

As part of this, we switch TravisCI to also using these toolchains for
all platforms.
Signed-off-by: NDaniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: NTom Rini <trini@konsulko.com>

- spl_board_init is empty on smartweb so drop that function
- When CONFIG_AT91SAM9_WATCHDOG is set we do not disable the watchdog in
  SPL and instead let full U-Boot handle it.  Instead of an empty
  function just do not call a function.
Signed-off-by: NTom Rini <trini@konsulko.com>

Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

For booting Linux in the generic distro mechanism, cmd/pxe.c
retrieves the FDT file name from "fdtfile" environment variable.

Rename "fdt_file" to "fdtfile" for easier migration to distro boot.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Change the phy-mode property to 'internal' that means to use a built-in PHY
implemented on LD11 SoC.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Add clock-names and reset-names because this node recognizes multiple
clocks and resets.  ("ether", and so on, for each)
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The GIO clock/reset, another MAC clock, and the PHY clock are required
for the ethernet of Pro4 SoC.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Add syscon-phy-mode property specifying a phandle of system controller
to each ethernet node.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Signed-off-by: NTom Rini <trini@konsulko.com>

Drop per-SoC Makefile entries and replace them with one unified entry
now that the PFC tables are gone. Shuffle the Makefile around a bit
to make it more organized.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

The V2H Blanche port was broken since some time. This patch updates
the V2H Blanche port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Enable the DM capable driver instead of the legacy one.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Enable the DM capable driver instead of the legacy one.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Add derivative of the rcar_i2c driver which is capable of
probing itself from DM and uses DT.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Remove the rcar_i2c driver, since it's no longer used by any
board and will be superseded by a DM and DT capable variant.
Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Signed-off-by: NTom Rini <trini@konsulko.com>

devm_zalloc() is already defined in dm/device.h header, so
devm_zalloc can be removed from linux_compact.h beader file.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Switch to DM_USB was done and there is no need to keep !DM_USB code in
tree.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Remove harcoded XHCI lists and detect mode, speed based on DT.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
Serial-changes: 2
- Remove also XHCI macros from hardware.h
- Remove additional new line in zcu106

The patch is adding support for DM_USB for xhci driver.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

By enabling BLK by default this is the next driver which needs to get
support for DM_USB. Adding generic DWC3 glue logic which only
parse nodes and read device mode. Based on it probe proper
host/peripheral DWC3 drivers for it.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

Add support to get maximum speed from dt so that usb drivers
makes use of it for DT parsing.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
(rebase and fix errors)
Reviewed-by: NSimon Glass <sjg@chromium.org>

The patch is preparing dwc3 core for enabling DM_USB with peripheral
driver with using driver model support.
The driver will be bound by the DWC3 wrapper driver based on the
dr_mode device tree entry.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
(Remove dwc3-omap changes)
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This patch adds phy tranceiver driver for STM32 USB PHY
Controller (usbphyc) that provides dual port High-Speed
phy for OTG (single port) and EHCI/OHCI host controller
(two ports).
One port of the phy is shared between the two USB controllers
through a UTMI+ switch.
Signed-off-by: NChristophe Kerello <christophe.kerello@st.com>
Signed-off-by: NAmelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: NPatrice Chotard <patrice.chotard@st.com>

During file download, it only uses 32bit variable for file size and
it limits maximum file size less than 4GB. Update to support more
than 4GB file with using two 32bit variables for file size as thor
protocol 5.0.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>

The thor sender can send filename without null character and it is
used without consideration of overflow. Actually, character array
for filename is assigned with DEFINE_CACHE_ALIGN_BUFFER() and it
is bigger than size of memcpy, so there was no real overflow.
Fix filename overflow for code level integrity.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>

Update dtsi and dts files for resets, phy node and other properties.
Signed-off-by: NLey Foon Tan <ley.foon.tan@intel.com>