- 11 10月, 2014 3 次提交
-
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Khoronzhuk, Ivan 提交于
Update readme file for Keystone II EVM boards to actual sources. Also correct some typos. For now the Edison evaluation board is added, README for K2E is mostly the same, so update README to contain information also for K2E evm. Rename file to README as it contains information for all keystone evm boards. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Murali Karicheri 提交于
The K2HK and K2E boards support SPL by default, so add CONFIG_SPL option. Also export CONFIG_ARM, CONFIG_ARCH_KEYSTONE and TARGET_K2*_EVM options to spl/.config as they are the same. So now it's convinient to build gph images using only two commands: make k2hk_evm_defconfig make u-boot-spi.gph Acked-By: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NMurali Karicheri <m-karicheri2@ti.com> Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
- 10 10月, 2014 30 次提交
-
-
-
由 Tom Rini 提交于
We need to set the 'BE' flag here for things to work right. Signed-off-by: NTom Rini <trini@ti.com>
-
由 Valentin Longchamp 提交于
Since on powerpc phys_size_t can be unsigned long long, this printout line can result in a not nice compile warning. Signed-off-by: NValentin Longchamp <valentin.longchamp@keymile.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Hannes Petermaier 提交于
The lines COL (collision detect) and CRS (carrier sense) needs to be connected and muxed to the CPSW MAC for a proper function in half-duplex Mode of the interface. Signed-off-by: NHannes Petermaier <oe5hpm@oevsv.at> Cc: Tom Rini <trini@ti.com>
-
由 York Sun 提交于
Fix the spelling of "configs". Signed-off-by: NYork Sun <yorksun@freescale.com> CC: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Jeroen Hofstee 提交于
A SPL/TPL enabled target would was not recognized as such by BSD sed, since it relies on a GNU extension. Instead of or-ing just spell out both matches. Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: NJeroen Hofstee <jeroen@myspectrum.nl> Acked-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 David Müller (ELSOFT AG) 提交于
remove the seldomly used EXT2 support because the U-Boot binary will not fit into the 512KiB flash otherwise. Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 David Müller (ELSOFT AG) 提交于
fix broken SPI access by adding/activating BOARD_EARLY_INIT_F functionality and calling spi_init_f() from there. Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 David Müller (ELSOFT AG) 提交于
Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 David Müller (ELSOFT AG) 提交于
Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 David Müller (ELSOFT AG) 提交于
Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 David Müller (ELSOFT AG) 提交于
Signed-off-by: NDavid Müller <d.mueller@elsoft.ch>
-
由 Wolfgang Denk 提交于
A number of network related files were imported from the LiMon project; these contain a somewhat unclear license statement: Copyright 1994 - 2000 Neil Russell. (See License) I analyzed the source code of LiMon v1.4.2 which was used for this import. It does not contain any "License" file, but the top level directory contains a file "COPYING", which turns out to be GPL v2 of June 1991. So it is legitimate to conclude that the LiMon derived files are also to be released under GPLv2. Mark them as such. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Alexander Kochetkov 提交于
Fix typo of commit d4e53f06. i2c2 pullup resisters are controlled by bit 0 of CONTROL_PROG_IO1. It's value after reset is 0x00100001. In order to clear bit 0, original code write 0xfffffffe to CONTROL_PROG_IO1 and toggle almost all default values. Original code affect following: * disable i2c1 pullup resisters * increase far end load setting for many modules * setup invalid SC/LB combination Signed-off-by: NAlexander Kochetkov <al.kochet@gmail.com> CC: Tom Rini <trini@ti.com> CC: Steve Kipisz <s-kipisz2@ti.com>
-
由 Masahiro Yamada 提交于
These boards have been orphaned for more than 6 months. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards have been orphaned for more than 6 months. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board has been orphaned for more than 6 months. It is the last board defining CONFIG_APM821XX. The code inside #ifdef CONFIG_APM821XX should be removed too. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
This board has been orphaned for more than 6 months. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
These boards have been orphaned for more than 6 months. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
In some cases, the last lines of SPL or TPL are not output to a file. The entries remaining in the "unmatched" variable must be flushed. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Khoronzhuk, Ivan 提交于
The definitions for div ratio supposed to be in hex and were added in dec by mistake. Signed-off-by: NIvan Khoronzhuk <ivan.khoronzhuk@ti.com>
-
由 Roger Quadros 提交于
At least on OMAP, init_sata() no longer performs scsi_scan() so we must do it explicitly here. Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: NRoger Quadros <rogerq@ti.com>
-
由 Roger Quadros 提交于
scsi_scan() must be called as part of scsi_init() and not as part of sata_init(). Signed-off-by: NRoger Quadros <rogerq@ti.com>
-
由 Roger Quadros 提交于
On OMAP platforms, SATA controller provides the SCSI subsystem so implement scsi_init(). Get rid of the unnecessary sata_init() call from dra7xx-evm and omap5-uevm board files. Signed-off-by: NRoger Quadros <rogerq@ti.com>
-
由 Roger Quadros 提交于
The DMA/FIS buffers are set in ahci_port_start() which is called after ahci_host_init(). So don't start the DMA engine here (i.e. don't set FIS_RX) This fixes the following error at kernel boot on OMAP platforms (e.g. DRA7x) WARNING: CPU: 0 PID: 0 at drivers/bus/omap_l3_noc.c:147 l3_interrupt_handler+0x260/0x358() 44000000.ocp:L3 Custom Error: MASTER SATA TARGET GPMC (Idle): Data Access in User mode during Functional access Signed-off-by: NRoger Quadros <rogerq@ti.com>
-
由 Stefan Herbrechtsmeier 提交于
Commit 12cc5437 'omap3: overo: Select fdtfile for expansion board' wrongly missed the operator in the fdtfile test. Update the test to only overwrite an empty fdtfile environment variable. Signed-off-by: NStefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
-
由 York Sun 提交于
Commit 294b91a5 moved initr_malloc earlier than initr_unlock_ram_in_cache. This causes issue on T4240. It may be related to locked L1 d-cache and unlocked L2 cache. D- cache could and should be unlock earlier for normal operation. This patch moves initr_unlock_ram_in_cache before initr_malloc. It has been verified on the following boards, in which only T4240QDS suffered and has been since fixed: T4240QDS, T2080QDS, P5040DS, P4080DS, MPC8572DS, MPC8536DS, MPC8641HPCN, B4860QDS. Signed-off-by: NYork Sun <yorksun@freescale.com> CC: Scott Wood <scottwood@freescale.com> CC: Simon Glass <sjg@chromium.org> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Ian Campbell 提交于
On a couple of platforms I've tripped over long PXE append lines overflowing this array, due to having CONFIG_SYS_CBSIZE == 256. When doing preseeded Debian installs it's pretty trivial to exceed that. Since the symptom can be a silent hang or a crash add a check. Of course the affected boards would also need an increased CBSIZE to actually work. Note that due to the printing of the final bootargs string CONFIG_SYS_PBSIZE also needs to be sufficiently large. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> [trini: Use %zd not %d in printf for all args] Signed-off-by: NTom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
The function nand_flash_detect_ext_param_page() requires NAND_CMD_RNDOUT command supported. It is necessary to detect some types of ONFi-compliant devices. Without it, the error message "unsupported command received 0x5" is shown. Let's support this command on the Denali NAND controller driver. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NChin Liang See <clsee@altera.com>
-
由 Masahiro Yamada 提交于
NAND_CMD_PARAM (0xEC) command is not working on the Denali NAND controller driver. Unlike NAND_CMD_READID (0x90), when the NAND_CMD_PARAM command is followed by an address cycle, the target device goes busy. (R/B# is deasserted) Wait until the parameter data are ready. In addition, unnecessary clear_interrupts() should be removed. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NChin Liang See <clsee@altera.com>
-
- 08 10月, 2014 1 次提交
-
-
由 Hans de Goede 提交于
In order for the gmac nic to work reliable on the Bananapi, we need to set bits 10-12 GTXDC "GMAC Transmit Clock Delay Chain" of the GMAC clk register (0x01c20164) to 3. Without this about 9 out of 10 ethernet packets get lost, with this setting there is no packet loss. So far setting these bits is only necessary on the Bananapi, so this commit solves this with a bit of #ifdef CONFIG_BANANAPI code. If in the future we need to do something similar for other boards, we can create a specific CONFIG_FOO option for this then. Reported-by: NKarsten Merker <merker@debian.org> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Tested-by: NKarsten Merker <merker@debian.org> Tested-by: NZoltan HERPAI <wigyori@openwrt.org> Tested-by: NTony Zhang <tony.zhang@lemaker.org> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
- 07 10月, 2014 6 次提交
-
-
-
由 Anthony Felice 提交于
Removed settings in unsupported register fields. They didn’t do anything, and in most cases, were not documented in the reference manual. Changed register settings to comply with JEDEC required values. Changed timing parameters because they included full clock periods that were doing nothing. Signed-off-by: NAnthony Felice <tony.felice@timesys.com> [rebased on v2014.10-rc2] Signed-off-by: NStefan Agner <stefan@agner.ch>
-
由 Albert ARIBAUD 提交于
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
-
git://git.denx.de/u-boot-socfpga由 Tom Rini 提交于
Fix a trivial conflict in dw_mmc.c after talking with Marek. Conflicts: drivers/mmc/dw_mmc.c Signed-off-by: NTom Rini <trini@ti.com>
-