Skip to content

U
U-Boot.Mirror

OS / U-Boot.Mirror

通知 1
Star 0
Fork 0
U
U-Boot.Mirror

体验新版 GitCode，发现更多精彩内容 >>

提交 04de09f8 编写于 作者: T Tom Rini
浏览文件
操作

Merge branch 'topic/arm/socfpga-20141006' of git://git.denx.de/u-boot-socfpga 

Fix a trivial conflict in dw_mmc.c after talking with Marek.

Conflicts:
	drivers/mmc/dw_mmc.c
Signed-off-by: NTom Rini <trini@ti.com>
上级 91693055 2f210639
隐藏空白更改
内联 并排
Showing with 2502 addition and 815 deletion
arch/arm/cpu/armv7/socfpga/Makefile
浏览文件 @ 04de09f8
......@@ -8,5 +8,6 @@
#
obj-y := lowlevel_init.o
obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o
obj-y += misc.o timer.o reset_manager.o system_manager.o clock_manager.o \
fpga_manager.o
obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o scan_manager.o
arch/arm/cpu/armv7/socfpga/clock_manager.c
浏览文件 @ 04de09f8
......@@ -8,38 +8,28 @@
#include <asm/io.h>
#include <asm/arch/clock_manager.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct socfpga_clock_manager *clock_manager_base =
(void *)SOCFPGA_CLKMGR_ADDRESS;
#define CLKMGR_BYPASS_ENABLE 1
#define CLKMGR_BYPASS_DISABLE 0
#define CLKMGR_STAT_IDLE 0
#define CLKMGR_STAT_BUSY 1
#define CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1 0
#define CLKMGR_BYPASS_PERPLLSRC_SELECT_INPUT_MUX 1
#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1 0
#define CLKMGR_BYPASS_SDRPLLSRC_SELECT_INPUT_MUX 1
#define CLEAR_BGP_EN_PWRDN \
(CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \
CLKMGR_MAINPLLGRP_VCO_EN_SET(0)| \
CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
#define VCO_EN_BASE \
(CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(0)| \
CLKMGR_MAINPLLGRP_VCO_EN_SET(1)| \
CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(0))
static inline void cm_wait_for_lock(uint32_t mask)
(struct socfpga_clock_manager *)SOCFPGA_CLKMGR_ADDRESS;
static void cm_wait_for_lock(uint32_t mask)
{
register uint32_t inter_val;
uint32_t retry = 0;
do {
inter_val = readl(&clock_manager_base->inter) & mask;
} while (inter_val != mask);
if (inter_val == mask)
retry++;
else
retry = 0;
if (retry >= 10)
break;
} while (1);
}
/* function to poll in the fsm busy bit */
static inline void cm_wait_for_fsm(void)
static void cm_wait_for_fsm(void)
{
while (readl(&clock_manager_base->stat) & CLKMGR_STAT_BUSY)
;
......@@ -49,22 +39,22 @@ static inline void cm_wait_for_fsm(void)
* function to write the bypass register which requires a poll of the
* busy bit
*/
static inline void cm_write_bypass(uint32_t val)
static void cm_write_bypass(uint32_t val)
{
writel(val, &clock_manager_base->bypass);
cm_wait_for_fsm();
}
/* function to write the ctrl register which requires a poll of the busy bit */
static inline void cm_write_ctrl(uint32_t val)
static void cm_write_ctrl(uint32_t val)
{
writel(val, &clock_manager_base->ctrl);
cm_wait_for_fsm();
}
/* function to write a clock register that has phase information */
static inline void cm_write_with_phase(uint32_t value,
uint32_t reg_address, uint32_t mask)
static void cm_write_with_phase(uint32_t value,
uint32_t reg_address, uint32_t mask)
{
/* poll until phase is zero */
while (readl(reg_address) & mask)
......@@ -128,24 +118,18 @@ void cm_basic_init(const cm_config_t *cfg)
writel(0, &clock_manager_base->per_pll.en);
/* Put all plls in bypass */
cm_write_bypass(
CLKMGR_BYPASS_PERPLLSRC_SET(
CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
CLKMGR_BYPASS_SDRPLLSRC_SET(
CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) |
CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_ENABLE) |
CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_ENABLE) |
CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_ENABLE));
cm_write_bypass(CLKMGR_BYPASS_PERPLL | CLKMGR_BYPASS_SDRPLL |
CLKMGR_BYPASS_MAINPLL);
/*
* Put all plls VCO registers back to reset value.
* Some code might have messed with them.
*/
writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE,
/* Put all plls VCO registers back to reset value. */
writel(CLKMGR_MAINPLLGRP_VCO_RESET_VALUE &
~CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
&clock_manager_base->main_pll.vco);
writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE,
writel(CLKMGR_PERPLLGRP_VCO_RESET_VALUE &
~CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
&clock_manager_base->per_pll.vco);
writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE,
writel(CLKMGR_SDRPLLGRP_VCO_RESET_VALUE &
~CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
&clock_manager_base->sdr_pll.vco);
/*
......@@ -170,19 +154,9 @@ void cm_basic_init(const cm_config_t *cfg)
* We made sure bgpwr down was assert for 5 us. Now deassert BG PWR DN
* with numerator and denominator.
*/
writel(cfg->main_vco_base | CLEAR_BGP_EN_PWRDN |
CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK,
&clock_manager_base->main_pll.vco);
writel(cfg->peri_vco_base | CLEAR_BGP_EN_PWRDN |
CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK,
&clock_manager_base->per_pll.vco);
writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) |
CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
cfg->sdram_vco_base | CLEAR_BGP_EN_PWRDN |
CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK,
&clock_manager_base->sdr_pll.vco);
writel(cfg->main_vco_base, &clock_manager_base->main_pll.vco);
writel(cfg->peri_vco_base, &clock_manager_base->per_pll.vco);
writel(cfg->sdram_vco_base, &clock_manager_base->sdr_pll.vco);
/*
* Time starts here
......@@ -217,6 +191,9 @@ void cm_basic_init(const cm_config_t *cfg)
writel(cfg->perqspiclk, &clock_manager_base->per_pll.perqspiclk);
/* Peri pernandsdmmcclk */
writel(cfg->mainnandsdmmcclk,
&clock_manager_base->main_pll.mainnandsdmmcclk);
writel(cfg->pernandsdmmcclk,
&clock_manager_base->per_pll.pernandsdmmcclk);
......@@ -232,18 +209,16 @@ void cm_basic_init(const cm_config_t *cfg)
/* Enable vco */
/* main pll vco */
writel(cfg->main_vco_base | VCO_EN_BASE,
writel(cfg->main_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
&clock_manager_base->main_pll.vco);
/* periferal pll */
writel(cfg->peri_vco_base | VCO_EN_BASE,
writel(cfg->peri_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
&clock_manager_base->per_pll.vco);
/* sdram pll vco */
writel(CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(0) |
CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
cfg->sdram_vco_base | VCO_EN_BASE,
&clock_manager_base->sdr_pll.vco);
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
&clock_manager_base->sdr_pll.vco);
/* L3 MP and L3 SP */
writel(cfg->maindiv, &clock_manager_base->main_pll.maindiv);
......@@ -294,8 +269,8 @@ void cm_basic_init(const cm_config_t *cfg)
&clock_manager_base->per_pll.vco);
/* assert sdram outresetall */
writel(cfg->sdram_vco_base | VCO_EN_BASE|
CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(1),
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN|
CLKMGR_SDRPLLGRP_VCO_OUTRESETALL,
&clock_manager_base->sdr_pll.vco);
/* deassert main outresetall */
......@@ -307,9 +282,8 @@ void cm_basic_init(const cm_config_t *cfg)
&clock_manager_base->per_pll.vco);
/* deassert sdram outresetall */
writel(CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(0) |
cfg->sdram_vco_base | VCO_EN_BASE,
&clock_manager_base->sdr_pll.vco);
writel(cfg->sdram_vco_base | CLKMGR_MAINPLLGRP_VCO_EN,
&clock_manager_base->sdr_pll.vco);
/*
* now that we've toggled outreset all, all the clocks
......@@ -333,18 +307,10 @@ void cm_basic_init(const cm_config_t *cfg)
CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK);
/* Take all three PLLs out of bypass when safe mode is cleared. */
cm_write_bypass(
CLKMGR_BYPASS_PERPLLSRC_SET(
CLKMGR_BYPASS_PERPLLSRC_SELECT_EOSC1) |
CLKMGR_BYPASS_SDRPLLSRC_SET(
CLKMGR_BYPASS_SDRPLLSRC_SELECT_EOSC1) |
CLKMGR_BYPASS_PERPLL_SET(CLKMGR_BYPASS_DISABLE) |
CLKMGR_BYPASS_SDRPLL_SET(CLKMGR_BYPASS_DISABLE) |
CLKMGR_BYPASS_MAINPLL_SET(CLKMGR_BYPASS_DISABLE));
cm_write_bypass(0);
/* clear safe mode */
cm_write_ctrl(readl(&clock_manager_base->ctrl) |
CLKMGR_CTRL_SAFEMODE_SET(CLKMGR_CTRL_SAFEMODE_MASK));
cm_write_ctrl(readl(&clock_manager_base->ctrl) | CLKMGR_CTRL_SAFEMODE);
/*
* now that safe mode is clear with clocks gated
......@@ -357,4 +323,224 @@ void cm_basic_init(const cm_config_t *cfg)
writel(~0, &clock_manager_base->main_pll.en);
writel(~0, &clock_manager_base->per_pll.en);
writel(~0, &clock_manager_base->sdr_pll.en);
/* Clear the loss of lock bits (write 1 to clear) */
writel(CLKMGR_INTER_SDRPLLLOST_MASK | CLKMGR_INTER_PERPLLLOST_MASK |
CLKMGR_INTER_MAINPLLLOST_MASK,
&clock_manager_base->inter);
}
static unsigned int cm_get_main_vco_clk_hz(void)
{
uint32_t reg, clock;
/* get the main VCO clock */
reg = readl(&clock_manager_base->main_pll.vco);
clock = CONFIG_HPS_CLK_OSC1_HZ;
clock /= ((reg & CLKMGR_MAINPLLGRP_VCO_DENOM_MASK) >>
CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) + 1;
clock *= ((reg & CLKMGR_MAINPLLGRP_VCO_NUMER_MASK) >>
CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) + 1;
return clock;
}
static unsigned int cm_get_per_vco_clk_hz(void)
{
uint32_t reg, clock = 0;
/* identify PER PLL clock source */
reg = readl(&clock_manager_base->per_pll.vco);
reg = (reg & CLKMGR_PERPLLGRP_VCO_SSRC_MASK) >>
CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET;
if (reg == CLKMGR_VCO_SSRC_EOSC1)
clock = CONFIG_HPS_CLK_OSC1_HZ;
else if (reg == CLKMGR_VCO_SSRC_EOSC2)
clock = CONFIG_HPS_CLK_OSC2_HZ;
else if (reg == CLKMGR_VCO_SSRC_F2S)
clock = CONFIG_HPS_CLK_F2S_PER_REF_HZ;
/* get the PER VCO clock */
reg = readl(&clock_manager_base->per_pll.vco);
clock /= ((reg & CLKMGR_PERPLLGRP_VCO_DENOM_MASK) >>
CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) + 1;
clock *= ((reg & CLKMGR_PERPLLGRP_VCO_NUMER_MASK) >>
CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) + 1;
return clock;
}
unsigned long cm_get_mpu_clk_hz(void)
{
uint32_t reg, clock;
clock = cm_get_main_vco_clk_hz();
/* get the MPU clock */
reg = readl(&clock_manager_base->altera.mpuclk);
clock /= (reg + 1);
reg = readl(&clock_manager_base->main_pll.mpuclk);
clock /= (reg + 1);
return clock;
}
unsigned long cm_get_sdram_clk_hz(void)
{
uint32_t reg, clock = 0;
/* identify SDRAM PLL clock source */
reg = readl(&clock_manager_base->sdr_pll.vco);
reg = (reg & CLKMGR_SDRPLLGRP_VCO_SSRC_MASK) >>
CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET;
if (reg == CLKMGR_VCO_SSRC_EOSC1)
clock = CONFIG_HPS_CLK_OSC1_HZ;
else if (reg == CLKMGR_VCO_SSRC_EOSC2)
clock = CONFIG_HPS_CLK_OSC2_HZ;
else if (reg == CLKMGR_VCO_SSRC_F2S)
clock = CONFIG_HPS_CLK_F2S_SDR_REF_HZ;
/* get the SDRAM VCO clock */
reg = readl(&clock_manager_base->sdr_pll.vco);
clock /= ((reg & CLKMGR_SDRPLLGRP_VCO_DENOM_MASK) >>
CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) + 1;
clock *= ((reg & CLKMGR_SDRPLLGRP_VCO_NUMER_MASK) >>
CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) + 1;
/* get the SDRAM (DDR_DQS) clock */
reg = readl(&clock_manager_base->sdr_pll.ddrdqsclk);
reg = (reg & CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK) >>
CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET;
clock /= (reg + 1);
return clock;
}
unsigned int cm_get_l4_sp_clk_hz(void)
{
uint32_t reg, clock = 0;
/* identify the source of L4 SP clock */
reg = readl(&clock_manager_base->main_pll.l4src);
reg = (reg & CLKMGR_MAINPLLGRP_L4SRC_L4SP) >>
CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET;
if (reg == CLKMGR_L4_SP_CLK_SRC_MAINPLL) {
clock = cm_get_main_vco_clk_hz();
/* get the clock prior L4 SP divider (main clk) */
reg = readl(&clock_manager_base->altera.mainclk);
clock /= (reg + 1);
reg = readl(&clock_manager_base->main_pll.mainclk);
clock /= (reg + 1);
} else if (reg == CLKMGR_L4_SP_CLK_SRC_PERPLL) {
clock = cm_get_per_vco_clk_hz();
/* get the clock prior L4 SP divider (periph_base_clk) */
reg = readl(&clock_manager_base->per_pll.perbaseclk);
clock /= (reg + 1);
}
/* get the L4 SP clock which supplied to UART */
reg = readl(&clock_manager_base->main_pll.maindiv);
reg = (reg & CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK) >>
CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET;
clock = clock / (1 << reg);
return clock;
}
unsigned int cm_get_mmc_controller_clk_hz(void)
{
uint32_t reg, clock = 0;
/* identify the source of MMC clock */
reg = readl(&clock_manager_base->per_pll.src);
reg = (reg & CLKMGR_PERPLLGRP_SRC_SDMMC_MASK) >>
CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET;
if (reg == CLKMGR_SDMMC_CLK_SRC_F2S) {
clock = CONFIG_HPS_CLK_F2S_PER_REF_HZ;
} else if (reg == CLKMGR_SDMMC_CLK_SRC_MAIN) {
clock = cm_get_main_vco_clk_hz();
/* get the SDMMC clock */
reg = readl(&clock_manager_base->main_pll.mainnandsdmmcclk);
clock /= (reg + 1);
} else if (reg == CLKMGR_SDMMC_CLK_SRC_PER) {
clock = cm_get_per_vco_clk_hz();
/* get the SDMMC clock */
reg = readl(&clock_manager_base->per_pll.pernandsdmmcclk);
clock /= (reg + 1);
}
/* further divide by 4 as we have fixed divider at wrapper */
clock /= 4;
return clock;
}
unsigned int cm_get_qspi_controller_clk_hz(void)
{
uint32_t reg, clock = 0;
/* identify the source of QSPI clock */
reg = readl(&clock_manager_base->per_pll.src);
reg = (reg & CLKMGR_PERPLLGRP_SRC_QSPI_MASK) >>
CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET;
if (reg == CLKMGR_QSPI_CLK_SRC_F2S) {
clock = CONFIG_HPS_CLK_F2S_PER_REF_HZ;
} else if (reg == CLKMGR_QSPI_CLK_SRC_MAIN) {
clock = cm_get_main_vco_clk_hz();
/* get the qspi clock */
reg = readl(&clock_manager_base->main_pll.mainqspiclk);
clock /= (reg + 1);
} else if (reg == CLKMGR_QSPI_CLK_SRC_PER) {
clock = cm_get_per_vco_clk_hz();
/* get the qspi clock */
reg = readl(&clock_manager_base->per_pll.perqspiclk);
clock /= (reg + 1);
}
return clock;
}
static void cm_print_clock_quick_summary(void)
{
printf("MPU %10ld kHz\n", cm_get_mpu_clk_hz() / 1000);
printf("DDR %10ld kHz\n", cm_get_sdram_clk_hz() / 1000);
printf("EOSC1 %8d kHz\n", CONFIG_HPS_CLK_OSC1_HZ / 1000);
printf("EOSC2 %8d kHz\n", CONFIG_HPS_CLK_OSC2_HZ / 1000);
printf("F2S_SDR_REF %8d kHz\n", CONFIG_HPS_CLK_F2S_SDR_REF_HZ / 1000);
printf("F2S_PER_REF %8d kHz\n", CONFIG_HPS_CLK_F2S_PER_REF_HZ / 1000);
printf("MMC %8d kHz\n", cm_get_mmc_controller_clk_hz() / 1000);
printf("QSPI %8d kHz\n", cm_get_qspi_controller_clk_hz() / 1000);
printf("UART %8d kHz\n", cm_get_l4_sp_clk_hz() / 1000);
}
int set_cpu_clk_info(void)
{
/* Calculate the clock frequencies required for drivers */
cm_get_l4_sp_clk_hz();
cm_get_mmc_controller_clk_hz();
gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000;
gd->bd->bi_dsp_freq = 0;
gd->bd->bi_ddr_freq = cm_get_sdram_clk_hz() / 1000000;
return 0;
}
int do_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
cm_print_clock_quick_summary();
return 0;
}
U_BOOT_CMD(
clocks, CONFIG_SYS_MAXARGS, 1, do_showclocks,
"display clocks",
""
);
arch/arm/cpu/armv7/socfpga/fpga_manager.c 0 → 100644
浏览文件 @ 04de09f8
/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
* All rights reserved.
*
* This file contains only support functions used also by the SoCFPGA
* platform code, the real meat is located in drivers/fpga/socfpga.c .
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/fpga_manager.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/system_manager.h>
DECLARE_GLOBAL_DATA_PTR;
/* Timeout count */
#define FPGA_TIMEOUT_CNT 0x1000000
static struct socfpga_fpga_manager *fpgamgr_regs =
(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
/* Check whether FPGA Init_Done signal is high */
static int is_fpgamgr_initdone_high(void)
{
unsigned long val;
val = readl(&fpgamgr_regs->gpio_ext_porta);
return val & FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK;
}
/* Get the FPGA mode */
int fpgamgr_get_mode(void)
{
unsigned long val;
val = readl(&fpgamgr_regs->stat);
return val & FPGAMGRREGS_STAT_MODE_MASK;
}
/* Check whether FPGA is ready to be accessed */
int fpgamgr_test_fpga_ready(void)
{
/* Check for init done signal */
if (!is_fpgamgr_initdone_high())
return 0;
/* Check again to avoid false glitches */
if (!is_fpgamgr_initdone_high())
return 0;
if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_USERMODE)
return 0;
return 1;
}
/* Poll until FPGA is ready to be accessed or timeout occurred */
int fpgamgr_poll_fpga_ready(void)
{
unsigned long i;
/* If FPGA is blank, wait till WD invoke warm reset */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
/* check for init done signal */
if (!is_fpgamgr_initdone_high())
continue;
/* check again to avoid false glitches */
if (!is_fpgamgr_initdone_high())
continue;
return 1;
}
return 0;
}
arch/arm/cpu/armv7/socfpga/misc.c
浏览文件 @ 04de09f8
......@@ -6,24 +6,103 @@
#include <common.h>
#include <asm/io.h>
#include <altera.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/system_manager.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/nic301.h>
#include <asm/arch/scu.h>
#include <asm/pl310.h>
DECLARE_GLOBAL_DATA_PTR;
static struct pl310_regs *const pl310 =
(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
static struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
static struct socfpga_reset_manager *reset_manager_base =
(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
static struct nic301_registers *nic301_regs =
(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
static struct scu_registers *scu_regs =
(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
return 0;
}
void enable_caches(void)
{
#ifndef CONFIG_SYS_ICACHE_OFF
icache_enable();
#endif
#ifndef CONFIG_SYS_DCACHE_OFF
dcache_enable();
#endif
}
/*
* DesignWare Ethernet initialization
*/
#ifdef CONFIG_DESIGNWARE_ETH
int cpu_eth_init(bd_t *bis)
{
#if CONFIG_EMAC_BASE == SOCFPGA_EMAC0_ADDRESS
const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
#elif CONFIG_EMAC_BASE == SOCFPGA_EMAC1_ADDRESS
const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
#else
#error "Incorrect CONFIG_EMAC_BASE value!"
#endif
/* Initialize EMAC. This needs to be done at least once per boot. */
/*
* Putting the EMAC controller to reset when configuring the PHY
* interface select at System Manager
*/
socfpga_emac_reset(1);
/* Clearing emac0 PHY interface select to 0 */
clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
/* configure to PHY interface select choosed */
setbits_le32(&sysmgr_regs->emacgrp_ctrl,
SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift);
/* Release the EMAC controller from reset */
socfpga_emac_reset(0);
/* initialize and register the emac */
return designware_initialize(CONFIG_EMAC_BASE,
CONFIG_PHY_INTERFACE_MODE);
}
#endif
#ifdef CONFIG_DWMMC
/*
* Initializes MMC controllers.
* to override, implement board_mmc_init()
*/
int cpu_mmc_init(bd_t *bis)
{
return socfpga_dwmmc_init(SOCFPGA_SDMMC_ADDRESS,
CONFIG_HPS_SDMMC_BUSWIDTH, 0);
}
#endif
#if defined(CONFIG_DISPLAY_CPUINFO)
/*
* Print CPU information
*/
int print_cpuinfo(void)
{
puts("CPU : Altera SOCFPGA Platform\n");
puts("CPU: Altera SoCFPGA Platform\n");
return 0;
}
#endif
......@@ -36,22 +115,159 @@ int overwrite_console(void)
}
#endif
int misc_init_r(void)
#ifdef CONFIG_FPGA
/*
* FPGA programming support for SoC FPGA Cyclone V
*/
static Altera_desc altera_fpga[] = {
{
/* Family */
Altera_SoCFPGA,
/* Interface type */
fast_passive_parallel,
/* No limitation as additional data will be ignored */
-1,
/* No device function table */
NULL,
/* Base interface address specified in driver */
NULL,
/* No cookie implementation */
0
},
};
/* add device descriptor to FPGA device table */
static void socfpga_fpga_add(void)
{
return 0;
int i;
fpga_init();
for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
fpga_add(fpga_altera, &altera_fpga[i]);
}
#else
static inline void socfpga_fpga_add(void) {}
#endif
int arch_cpu_init(void)
{
/*
* If the HW watchdog is NOT enabled, make sure it is not running,
* for example because it was enabled in the preloader. This might
* trigger a watchdog-triggered reboot of Linux kernel later.
*/
#ifndef CONFIG_HW_WATCHDOG
socfpga_watchdog_reset();
#endif
return 0;
}
/*
* DesignWare Ethernet initialization
* Convert all NIC-301 AMBA slaves from secure to non-secure
*/
int cpu_eth_init(bd_t *bis)
static void socfpga_nic301_slave_ns(void)
{
#if !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) && !defined(CONFIG_SPL_BUILD)
/* initialize and register the emac */
return designware_initialize(CONFIG_EMAC_BASE,
CONFIG_PHY_INTERFACE_MODE);
writel(0x1, &nic301_regs->lwhps2fpgaregs);
writel(0x1, &nic301_regs->hps2fpgaregs);
writel(0x1, &nic301_regs->acp);
writel(0x1, &nic301_regs->rom);
writel(0x1, &nic301_regs->ocram);
writel(0x1, &nic301_regs->sdrdata);
}
static uint32_t iswgrp_handoff[8];
int misc_init_r(void)
{
int i;
for (i = 0; i < 8; i++) /* Cache initial SW setting regs */
iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
socfpga_bridges_reset(1);
socfpga_nic301_slave_ns();
/*
* Private components security:
* U-Boot : configure private timer, global timer and cpu component
* access as non secure for kernel stage (as required by Linux)
*/
setbits_le32(&scu_regs->sacr, 0xfff);
/* Configure the L2 controller to make SDRAM start at 0 */
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
writel(0x2, &nic301_regs->remap);
#else
return 0;
writel(0x1, &nic301_regs->remap); /* remap.mpuzero */
writel(0x1, &pl310->pl310_addr_filter_start);
#endif
/* Add device descriptor to FPGA device table */
socfpga_fpga_add();
return 0;
}
static void socfpga_sdram_apply_static_cfg(void)
{
const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c;
const uint32_t applymask = 0x8;
uint32_t val = readl(staticcfg) | applymask;
/*
* SDRAM staticcfg register specific:
* When applying the register setting, the CPU must not access
* SDRAM. Luckily for us, we can abuse i-cache here to help us
* circumvent the SDRAM access issue. The idea is to make sure
* that the code is in one full i-cache line by branching past
* it and back. Once it is in the i-cache, we execute the core
* of the code and apply the register settings.
*
* The code below uses 7 instructions, while the Cortex-A9 has
* 32-byte cachelines, thus the limit is 8 instructions total.
*/
asm volatile(
".align 5 \n"
" b 2f \n"
"1: str %0, [%1] \n"
" dsb \n"
" isb \n"
" b 3f \n"
"2: b 1b \n"
"3: nop \n"
: : "r"(val), "r"(staticcfg) : "memory", "cc");
}
int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc != 2)
return CMD_RET_USAGE;
argv++;
switch (*argv[0]) {
case 'e': /* Enable */
writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
socfpga_sdram_apply_static_cfg();
writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080);
writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
writel(iswgrp_handoff[1], &nic301_regs->remap);
break;
case 'd': /* Disable */
writel(0, &sysmgr_regs->fpgaintfgrp_module);
writel(0, SOCFPGA_SDR_ADDRESS + 0x5080);
socfpga_sdram_apply_static_cfg();
writel(0, &reset_manager_base->brg_mod_reset);
writel(1, &nic301_regs->remap);
break;
default:
return CMD_RET_USAGE;
}
return 0;
}
U_BOOT_CMD(
bridge, 2, 1, do_bridge,
"SoCFPGA HPS FPGA bridge control",
"enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
""
);
arch/arm/cpu/armv7/socfpga/reset_manager.c
浏览文件 @ 04de09f8
......@@ -8,12 +8,25 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/fpga_manager.h>
DECLARE_GLOBAL_DATA_PTR;
static const struct socfpga_reset_manager *reset_manager_base =
(void *)SOCFPGA_RSTMGR_ADDRESS;
/* Toggle reset signal to watchdog (WDT is disabled after this operation!) */
void socfpga_watchdog_reset(void)
{
/* assert reset for watchdog */
setbits_le32(&reset_manager_base->per_mod_reset,
1 << RSTMGR_PERMODRST_L4WD0_LSB);
/* deassert watchdog from reset (watchdog in not running state) */
clrbits_le32(&reset_manager_base->per_mod_reset,
1 << RSTMGR_PERMODRST_L4WD0_LSB);
}
/*
* Write the reset manager register to cause reset
*/
......@@ -37,3 +50,57 @@ void reset_deassert_peripherals_handoff(void)
{
writel(0, &reset_manager_base->per_mod_reset);
}
#if defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
void socfpga_bridges_reset(int enable)
{
/* For SoCFPGA-VT, this is NOP. */
}
#else
#define L3REGS_REMAP_LWHPS2FPGA_MASK 0x10
#define L3REGS_REMAP_HPS2FPGA_MASK 0x08
#define L3REGS_REMAP_OCRAM_MASK 0x01
void socfpga_bridges_reset(int enable)
{
const uint32_t l3mask = L3REGS_REMAP_LWHPS2FPGA_MASK |
L3REGS_REMAP_HPS2FPGA_MASK |
L3REGS_REMAP_OCRAM_MASK;
if (enable) {
/* brdmodrst */
writel(0xffffffff, &reset_manager_base->brg_mod_reset);
} else {
/* Check signal from FPGA. */
if (fpgamgr_poll_fpga_ready()) {
/* FPGA not ready. Wait for watchdog timeout. */
printf("%s: fpga not ready, hanging.\n", __func__);
hang();
}
/* brdmodrst */
writel(0, &reset_manager_base->brg_mod_reset);
/* Remap the bridges into memory map */
writel(l3mask, SOCFPGA_L3REGS_ADDRESS);
}
}
#endif
/* Change the reset state for EMAC 0 and EMAC 1 */
void socfpga_emac_reset(int enable)
{
const void *reset = &reset_manager_base->per_mod_reset;
if (enable) {
setbits_le32(reset, 1 << RSTMGR_PERMODRST_EMAC0_LSB);
setbits_le32(reset, 1 << RSTMGR_PERMODRST_EMAC1_LSB);
} else {
#if (CONFIG_EMAC_BASE == SOCFPGA_EMAC0_ADDRESS)
clrbits_le32(reset, 1 << RSTMGR_PERMODRST_EMAC0_LSB);
#elif (CONFIG_EMAC_BASE == SOCFPGA_EMAC1_ADDRESS)
clrbits_le32(reset, 1 << RSTMGR_PERMODRST_EMAC1_LSB);
#endif
}
}
arch/arm/cpu/armv7/socfpga/spl.c
浏览文件 @ 04de09f8
......@@ -19,6 +19,31 @@
DECLARE_GLOBAL_DATA_PTR;
#define MAIN_VCO_BASE ( \
(CONFIG_HPS_MAINPLLGRP_VCO_DENOM << \
CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET) | \
(CONFIG_HPS_MAINPLLGRP_VCO_NUMER << \
CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET) \
)
#define PERI_VCO_BASE ( \
(CONFIG_HPS_PERPLLGRP_VCO_PSRC << \
CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET) | \
(CONFIG_HPS_PERPLLGRP_VCO_DENOM << \
CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET) | \
(CONFIG_HPS_PERPLLGRP_VCO_NUMER << \
CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET) \
)
#define SDR_VCO_BASE ( \
(CONFIG_HPS_SDRPLLGRP_VCO_SSRC << \
CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET) | \
(CONFIG_HPS_SDRPLLGRP_VCO_DENOM << \
CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET) | \
(CONFIG_HPS_SDRPLLGRP_VCO_NUMER << \
CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET) \
)
u32 spl_boot_device(void)
{
return BOOT_DEVICE_RAM;
......@@ -33,86 +58,87 @@ void spl_board_init(void)
cm_config_t cm_default_cfg = {
/* main group */
MAIN_VCO_BASE,
CLKMGR_MAINPLLGRP_MPUCLK_CNT_SET(
CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT),
CLKMGR_MAINPLLGRP_MAINCLK_CNT_SET(
CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT),
CLKMGR_MAINPLLGRP_DBGATCLK_CNT_SET(
CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT),
CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_SET(
CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT),
CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_SET(
CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT),
CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_SET(
CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT),
CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_SET(
CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK) |
CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_SET(
CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK) |
CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_SET(
CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK) |
CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_SET(
CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK),
CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_SET(
CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK) |
CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_SET(
CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK),
CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_SET(
CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK),
CLKMGR_MAINPLLGRP_L4SRC_L4MP_SET(
CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP) |
CLKMGR_MAINPLLGRP_L4SRC_L4SP_SET(
CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP),
(CONFIG_HPS_MAINPLLGRP_MPUCLK_CNT <<
CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET),
(CONFIG_HPS_MAINPLLGRP_MAINCLK_CNT <<
CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET),
(CONFIG_HPS_MAINPLLGRP_DBGATCLK_CNT <<
CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET),
(CONFIG_HPS_MAINPLLGRP_MAINQSPICLK_CNT <<
CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET),
(CONFIG_HPS_MAINPLLGRP_MAINNANDSDMMCCLK_CNT <<
CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET),
(CONFIG_HPS_MAINPLLGRP_CFGS2FUSER0CLK_CNT <<
CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET),
(CONFIG_HPS_MAINPLLGRP_MAINDIV_L3MPCLK <<
CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET) |
(CONFIG_HPS_MAINPLLGRP_MAINDIV_L3SPCLK <<
CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET) |
(CONFIG_HPS_MAINPLLGRP_MAINDIV_L4MPCLK <<
CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET) |
(CONFIG_HPS_MAINPLLGRP_MAINDIV_L4SPCLK <<
CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET),
(CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGATCLK <<
CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET) |
(CONFIG_HPS_MAINPLLGRP_DBGDIV_DBGCLK <<
CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET),
(CONFIG_HPS_MAINPLLGRP_TRACEDIV_TRACECLK <<
CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET),
(CONFIG_HPS_MAINPLLGRP_L4SRC_L4MP <<
CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET) |
(CONFIG_HPS_MAINPLLGRP_L4SRC_L4SP <<
CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET),
/* peripheral group */
PERI_VCO_BASE,
CLKMGR_PERPLLGRP_EMAC0CLK_CNT_SET(
CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT),
CLKMGR_PERPLLGRP_EMAC1CLK_CNT_SET(
CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT),
CLKMGR_PERPLLGRP_PERQSPICLK_CNT_SET(
CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT),
CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_SET(
CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT),
CLKMGR_PERPLLGRP_PERBASECLK_CNT_SET(
CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT),
CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_SET(
CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT),
CLKMGR_PERPLLGRP_DIV_USBCLK_SET(
CONFIG_HPS_PERPLLGRP_DIV_USBCLK) |
CLKMGR_PERPLLGRP_DIV_SPIMCLK_SET(
CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK) |
CLKMGR_PERPLLGRP_DIV_CAN0CLK_SET(
CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK) |
CLKMGR_PERPLLGRP_DIV_CAN1CLK_SET(
CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK),
CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_SET(
CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK),
CLKMGR_PERPLLGRP_SRC_QSPI_SET(
CONFIG_HPS_PERPLLGRP_SRC_QSPI) |
CLKMGR_PERPLLGRP_SRC_NAND_SET(
CONFIG_HPS_PERPLLGRP_SRC_NAND) |
CLKMGR_PERPLLGRP_SRC_SDMMC_SET(
CONFIG_HPS_PERPLLGRP_SRC_SDMMC),
(CONFIG_HPS_PERPLLGRP_EMAC0CLK_CNT <<
CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET),
(CONFIG_HPS_PERPLLGRP_EMAC1CLK_CNT <<
CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET),
(CONFIG_HPS_PERPLLGRP_PERQSPICLK_CNT <<
CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET),
(CONFIG_HPS_PERPLLGRP_PERNANDSDMMCCLK_CNT <<
CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET),
(CONFIG_HPS_PERPLLGRP_PERBASECLK_CNT <<
CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET),
(CONFIG_HPS_PERPLLGRP_S2FUSER1CLK_CNT <<
CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET),
(CONFIG_HPS_PERPLLGRP_DIV_USBCLK <<
CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET) |
(CONFIG_HPS_PERPLLGRP_DIV_SPIMCLK <<
CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET) |
(CONFIG_HPS_PERPLLGRP_DIV_CAN0CLK <<
CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET) |
(CONFIG_HPS_PERPLLGRP_DIV_CAN1CLK <<
CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET),
(CONFIG_HPS_PERPLLGRP_GPIODIV_GPIODBCLK <<
CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET),
(CONFIG_HPS_PERPLLGRP_SRC_QSPI <<
CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET) |
(CONFIG_HPS_PERPLLGRP_SRC_NAND <<
CLKMGR_PERPLLGRP_SRC_NAND_OFFSET) |
(CONFIG_HPS_PERPLLGRP_SRC_SDMMC <<
CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET),
/* sdram pll group */
SDR_VCO_BASE,
CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_SET(
CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE) |
CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_SET(
CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT),
CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_SET(
CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE) |
CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_SET(
CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT),
CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_SET(
CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE) |
CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_SET(
CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT),
CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_SET(
CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE) |
CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_SET(
CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT),
(CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_PHASE <<
CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET) |
(CONFIG_HPS_SDRPLLGRP_DDRDQSCLK_CNT <<
CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET),
(CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_PHASE <<
CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET) |
(CONFIG_HPS_SDRPLLGRP_DDR2XDQSCLK_CNT <<
CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET),
(CONFIG_HPS_SDRPLLGRP_DDRDQCLK_PHASE <<
CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET) |
(CONFIG_HPS_SDRPLLGRP_DDRDQCLK_CNT <<
CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET),
(CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_PHASE <<
CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET) |
(CONFIG_HPS_SDRPLLGRP_S2FUSER2CLK_CNT <<
CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET),
};
debug("Freezing all I/O banks\n");
......
arch/arm/cpu/armv7/socfpga/system_manager.c
浏览文件 @ 04de09f8
/*
* Copyright (C) 2013 Altera Corporation <www.altera.com>
* Copyright (C) 2013 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
......@@ -7,21 +7,62 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/system_manager.h>
#include <asm/arch/fpga_manager.h>
DECLARE_GLOBAL_DATA_PTR;
static struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
/*
* Populate the value for SYSMGR.FPGAINTF.MODULE based on pinmux setting.
* The value is not wrote to SYSMGR.FPGAINTF.MODULE but
* CONFIG_SYSMGR_ISWGRP_HANDOFF.
*/
static void populate_sysmgr_fpgaintf_module(void)
{
uint32_t handoff_val = 0;
/* ISWGRP_HANDOFF_FPGAINTF */
writel(0, &sysmgr_regs->iswgrp_handoff[2]);
/* Enable the signal for those HPS peripherals that use FPGA. */
if (readl(&sysmgr_regs->nandusefpga) == SYSMGR_FPGAINTF_USEFPGA)
handoff_val |= SYSMGR_FPGAINTF_NAND;
if (readl(&sysmgr_regs->rgmii1usefpga) == SYSMGR_FPGAINTF_USEFPGA)
handoff_val |= SYSMGR_FPGAINTF_EMAC1;
if (readl(&sysmgr_regs->sdmmcusefpga) == SYSMGR_FPGAINTF_USEFPGA)
handoff_val |= SYSMGR_FPGAINTF_SDMMC;
if (readl(&sysmgr_regs->rgmii0usefpga) == SYSMGR_FPGAINTF_USEFPGA)
handoff_val |= SYSMGR_FPGAINTF_EMAC0;
if (readl(&sysmgr_regs->spim0usefpga) == SYSMGR_FPGAINTF_USEFPGA)
handoff_val |= SYSMGR_FPGAINTF_SPIM0;
if (readl(&sysmgr_regs->spim1usefpga) == SYSMGR_FPGAINTF_USEFPGA)
handoff_val |= SYSMGR_FPGAINTF_SPIM1;
/* populate (not writing) the value for SYSMGR.FPGAINTF.MODULE
based on pinmux setting */
setbits_le32(&sysmgr_regs->iswgrp_handoff[2], handoff_val);
handoff_val = readl(&sysmgr_regs->iswgrp_handoff[2]);
if (fpgamgr_test_fpga_ready()) {
/* Enable the required signals only */
writel(handoff_val, &sysmgr_regs->fpgaintfgrp_module);
}
}
/*
* Configure all the pin muxes
*/
void sysmgr_pinmux_init(void)
{
unsigned long offset = CONFIG_SYSMGR_PINMUXGRP_OFFSET;
const unsigned long *pval = sys_mgr_init_table;
unsigned long i;
uint32_t regs = (uint32_t)&sysmgr_regs->emacio[0];
int i;
for (i = 0; i < ARRAY_SIZE(sys_mgr_init_table);
i++, offset += sizeof(unsigned long)) {
writel(*pval++, (SOCFPGA_SYSMGR_ADDRESS + offset));
for (i = 0; i < ARRAY_SIZE(sys_mgr_init_table); i++) {
writel(sys_mgr_init_table[i], regs);
regs += sizeof(regs);
}
populate_sysmgr_fpgaintf_module();
}
arch/arm/cpu/armv7/socfpga/timer.c
浏览文件 @ 04de09f8
......@@ -8,6 +8,8 @@
#include <asm/io.h>
#include <asm/arch/timer.h>
#define TIMER_LOAD_VAL 0xFFFFFFFF
static const struct socfpga_timer *timer_base = (void *)CONFIG_SYS_TIMERBASE;
/*
......
arch/arm/include/asm/arch-socfpga/clock_manager.h
浏览文件 @ 04de09f8
......@@ -7,6 +7,15 @@
#ifndef _CLOCK_MANAGER_H_
#define _CLOCK_MANAGER_H_
#ifndef __ASSEMBLER__
/* Clock speed accessors */
unsigned long cm_get_mpu_clk_hz(void);
unsigned long cm_get_sdram_clk_hz(void);
unsigned int cm_get_l4_sp_clk_hz(void);
unsigned int cm_get_mmc_controller_clk_hz(void);
unsigned int cm_get_qspi_controller_clk_hz(void);
#endif
typedef struct {
/* main group */
uint32_t main_vco_base;
......@@ -89,6 +98,11 @@ struct socfpga_clock_manager_sdr_pll {
u32 stat;
};
struct socfpga_clock_manager_altera {
u32 mpuclk;
u32 mainclk;
};
struct socfpga_clock_manager {
u32 ctrl;
u32 bypass;
......@@ -100,112 +114,194 @@ struct socfpga_clock_manager {
struct socfpga_clock_manager_main_pll main_pll;
struct socfpga_clock_manager_per_pll per_pll;
struct socfpga_clock_manager_sdr_pll sdr_pll;
u32 _pad_0xe0_0x200[72];
struct socfpga_clock_manager_altera altera;
u32 _pad_0xe8_0x200[70];
};
#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK 0x00000200
#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK 0x00000080
#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK 0x00000040
#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK 0x00000020
#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK 0x00000010
#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK 0x00000004
#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_SET(x) (((x) << 4) & 0x00000070)
#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_SET(x) (((x) << 7) & 0x00000380)
#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_SET(x) (((x) << 0) & 0x00000001)
#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_SET(x) (((x) << 1) & 0x00000002)
#define CLKMGR_PERPLLGRP_SRC_QSPI_SET(x) (((x) << 4) & 0x00000030)
#define CLKMGR_PERPLLGRP_SRC_NAND_SET(x) (((x) << 2) & 0x0000000c)
#define CLKMGR_PERPLLGRP_SRC_SDMMC_SET(x) (((x) << 0) & 0x00000003)
#define CLKMGR_MAINPLLGRP_VCO_DENOM_SET(x) (((x) << 16) & 0x003f0000)
#define CLKMGR_MAINPLLGRP_VCO_NUMER_SET(x) (((x) << 3) & 0x0000fff8)
#define CLKMGR_MAINPLLGRP_VCO_PWRDN_SET(x) (((x) << 2) & 0x00000004)
#define CLKMGR_MAINPLLGRP_VCO_EN_SET(x) (((x) << 1) & 0x00000002)
#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_SET(x) (((x) << 0) & 0x00000001)
#define CLKMGR_PERPLLGRP_VCO_PSRC_SET(x) (((x) << 22) & 0x00c00000)
#define CLKMGR_PERPLLGRP_VCO_DENOM_SET(x) (((x) << 16) & 0x003f0000)
#define CLKMGR_PERPLLGRP_VCO_NUMER_SET(x) (((x) << 3) & 0x0000fff8)
#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_SET(x) (((x) << 25) & 0x7e000000)
#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(x) (((x) << 24) & 0x01000000)
#define CLKMGR_SDRPLLGRP_VCO_SSRC_SET(x) (((x) << 22) & 0x00c00000)
#define CLKMGR_SDRPLLGRP_VCO_DENOM_SET(x) (((x) << 16) & 0x003f0000)
#define CLKMGR_SDRPLLGRP_VCO_NUMER_SET(x) (((x) << 3) & 0x0000fff8)
#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_SET(x) \
(((x) << 0) & 0x000001ff)
#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_SET(x) \
(((x) << 0) & 0x000001ff)
#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_SET(x) (((x) << 9) & 0x00000e00)
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_SET(x) (((x) << 9) & 0x00000e00)
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_SET(x) (((x) << 9) & 0x00000e00)
#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_SET(x) (((x) << 9) & 0x00000e00)
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_SET(x) (((x) << 2) & 0x0000000c)
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_SET(x) (((x) << 0) & 0x00000003)
#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_SET(x) (((x) << 0) & 0x00000007)
#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_SET(x) (((x) << 0) & 0x00000003)
#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_SET(x) (((x) << 2) & 0x0000000c)
#define CLKMGR_BYPASS_PERPLL_SET(x) (((x) << 3) & 0x00000008)
#define CLKMGR_BYPASS_SDRPLL_SET(x) (((x) << 1) & 0x00000002)
#define CLKMGR_BYPASS_MAINPLL_SET(x) (((x) << 0) & 0x00000001)
#define CLKMGR_PERPLLGRP_DIV_USBCLK_SET(x) (((x) << 0) & 0x00000007)
#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_SET(x) (((x) << 3) & 0x00000038)
#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_SET(x) (((x) << 6) & 0x000001c0)
#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_SET(x) (((x) << 9) & 0x00000e00)
#define CLKMGR_INTER_SDRPLLLOCKED_MASK 0x00000100
#define CLKMGR_INTER_PERPLLLOCKED_MASK 0x00000080
#define CLKMGR_INTER_MAINPLLLOCKED_MASK 0x00000040
#define CLKMGR_CTRL_SAFEMODE_MASK 0x00000001
#define CLKMGR_CTRL_SAFEMODE_SET(x) (((x) << 0) & 0x00000001)
#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_SET(x) (((x) << 24) & 0x01000000)
#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_SET(x) (((x) << 0) & 0x000001ff)
#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_SET(x) (((x) << 3) & 0x00000038)
#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_SET(x) (((x) << 0) & 0x00ffffff)
#define CLKMGR_BYPASS_PERPLLSRC_SET(x) (((x) << 4) & 0x00000010)
#define CLKMGR_BYPASS_SDRPLLSRC_SET(x) (((x) << 2) & 0x00000004)
#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x001ffe00
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x001ffe00
#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x001ffe00
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x001ffe00
#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
#define MAIN_VCO_BASE \
(CLKMGR_MAINPLLGRP_VCO_DENOM_SET(CONFIG_HPS_MAINPLLGRP_VCO_DENOM) | \
CLKMGR_MAINPLLGRP_VCO_NUMER_SET(CONFIG_HPS_MAINPLLGRP_VCO_NUMER))
#define PERI_VCO_BASE \
(CLKMGR_PERPLLGRP_VCO_PSRC_SET(CONFIG_HPS_PERPLLGRP_VCO_PSRC) | \
CLKMGR_PERPLLGRP_VCO_DENOM_SET(CONFIG_HPS_PERPLLGRP_VCO_DENOM) | \
CLKMGR_PERPLLGRP_VCO_NUMER_SET(CONFIG_HPS_PERPLLGRP_VCO_NUMER))
#define SDR_VCO_BASE \
(CLKMGR_SDRPLLGRP_VCO_SSRC_SET(CONFIG_HPS_SDRPLLGRP_VCO_SSRC) | \
CLKMGR_SDRPLLGRP_VCO_DENOM_SET(CONFIG_HPS_SDRPLLGRP_VCO_DENOM) | \
CLKMGR_SDRPLLGRP_VCO_NUMER_SET(CONFIG_HPS_SDRPLLGRP_VCO_NUMER))
#define CLKMGR_CTRL_SAFEMODE (1 << 0)
#define CLKMGR_CTRL_SAFEMODE_OFFSET 0
#define CLKMGR_BYPASS_PERPLLSRC (1 << 4)
#define CLKMGR_BYPASS_PERPLLSRC_OFFSET 4
#define CLKMGR_BYPASS_PERPLL (1 << 3)
#define CLKMGR_BYPASS_PERPLL_OFFSET 3
#define CLKMGR_BYPASS_SDRPLLSRC (1 << 2)
#define CLKMGR_BYPASS_SDRPLLSRC_OFFSET 2
#define CLKMGR_BYPASS_SDRPLL (1 << 1)
#define CLKMGR_BYPASS_SDRPLL_OFFSET 1
#define CLKMGR_BYPASS_MAINPLL (1 << 0)
#define CLKMGR_BYPASS_MAINPLL_OFFSET 0
#define CLKMGR_INTER_SDRPLLLOCKED_MASK 0x00000100
#define CLKMGR_INTER_PERPLLLOCKED_MASK 0x00000080
#define CLKMGR_INTER_MAINPLLLOCKED_MASK 0x00000040
#define CLKMGR_INTER_PERPLLLOST_MASK 0x00000010
#define CLKMGR_INTER_SDRPLLLOST_MASK 0x00000020
#define CLKMGR_INTER_MAINPLLLOST_MASK 0x00000008
#define CLKMGR_STAT_BUSY (1 << 0)
/* Main PLL */
#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN (1 << 0)
#define CLKMGR_MAINPLLGRP_VCO_BGPWRDN_OFFSET 0
#define CLKMGR_MAINPLLGRP_VCO_DENOM_OFFSET 16
#define CLKMGR_MAINPLLGRP_VCO_DENOM_MASK 0x003f0000
#define CLKMGR_MAINPLLGRP_VCO_EN (1 << 1)
#define CLKMGR_MAINPLLGRP_VCO_EN_OFFSET 1
#define CLKMGR_MAINPLLGRP_VCO_NUMER_OFFSET 3
#define CLKMGR_MAINPLLGRP_VCO_NUMER_MASK 0x0000fff8
#define CLKMGR_MAINPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
#define CLKMGR_MAINPLLGRP_VCO_PWRDN (1 << 2)
#define CLKMGR_MAINPLLGRP_VCO_PWRDN_OFFSET 2
#define CLKMGR_MAINPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
#define CLKMGR_MAINPLLGRP_VCO_RESET_VALUE 0x8001000d
#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_OFFSET 0
#define CLKMGR_MAINPLLGRP_MPUCLK_CNT_MASK 0x000001ff
#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_OFFSET 0
#define CLKMGR_MAINPLLGRP_MAINCLK_CNT_MASK 0x000001ff
#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_OFFSET 0
#define CLKMGR_MAINPLLGRP_DBGATCLK_CNT_MASK 0x000001ff
#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_OFFSET 0
#define CLKMGR_MAINPLLGRP_MAINQSPICLK_CNT_MASK 0x000001ff
#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_OFFSET 0
#define CLKMGR_MAINPLLGRP_MAINNANDSDMMCCLK_CNT_MASK 0x000001ff
#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_OFFSET 0
#define CLKMGR_MAINPLLGRP_CFGS2FUSER0CLK_CNT_MASK 0x000001ff
#define CLKMGR_MAINPLLGRP_EN_DBGATCLK_MASK 0x00000010
#define CLKMGR_MAINPLLGRP_EN_DBGCLK_MASK 0x00000020
#define CLKMGR_MAINPLLGRP_EN_DBGTIMERCLK_MASK 0x00000080
#define CLKMGR_MAINPLLGRP_EN_DBGTRACECLK_MASK 0x00000040
#define CLKMGR_MAINPLLGRP_EN_L4MPCLK_MASK 0x00000004
#define CLKMGR_MAINPLLGRP_EN_S2FUSER0CLK_MASK 0x00000200
#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_OFFSET 0
#define CLKMGR_MAINPLLGRP_MAINDIV_L3MPCLK_MASK 0x00000003
#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_OFFSET 2
#define CLKMGR_MAINPLLGRP_MAINDIV_L3SPCLK_MASK 0x0000000c
#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_OFFSET 4
#define CLKMGR_MAINPLLGRP_MAINDIV_L4MPCLK_MASK 0x00000070
#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_OFFSET 7
#define CLKMGR_MAINPLLGRP_MAINDIV_L4SPCLK_MASK 0x00000380
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_OFFSET 0
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGATCLK_MASK 0x00000003
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_OFFSET 2
#define CLKMGR_MAINPLLGRP_DBGDIV_DBGCLK_MASK 0x0000000c
#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_OFFSET 0
#define CLKMGR_MAINPLLGRP_TRACEDIV_TRACECLK_MASK 0x00000007
#define CLKMGR_MAINPLLGRP_L4SRC_L4MP (1 << 0)
#define CLKMGR_MAINPLLGRP_L4SRC_L4MP_OFFSET 0
#define CLKMGR_MAINPLLGRP_L4SRC_L4SP (1 << 1)
#define CLKMGR_MAINPLLGRP_L4SRC_L4SP_OFFSET 1
#define CLKMGR_MAINPLLGRP_L4SRC_RESET_VALUE 0x00000000
#define CLKMGR_L4_SP_CLK_SRC_MAINPLL 0x0
#define CLKMGR_L4_SP_CLK_SRC_PERPLL 0x1
/* Per PLL */
#define CLKMGR_PERPLLGRP_VCO_DENOM_OFFSET 16
#define CLKMGR_PERPLLGRP_VCO_DENOM_MASK 0x003f0000
#define CLKMGR_PERPLLGRP_VCO_NUMER_OFFSET 3
#define CLKMGR_PERPLLGRP_VCO_NUMER_MASK 0x0000fff8
#define CLKMGR_PERPLLGRP_VCO_OUTRESETALL_MASK 0x01000000
#define CLKMGR_PERPLLGRP_VCO_PSRC_OFFSET 22
#define CLKMGR_PERPLLGRP_VCO_PSRC_MASK 0x00c00000
#define CLKMGR_PERPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
#define CLKMGR_PERPLLGRP_VCO_RESET_VALUE 0x8001000d
#define CLKMGR_PERPLLGRP_VCO_SSRC_OFFSET 22
#define CLKMGR_PERPLLGRP_VCO_SSRC_MASK 0x00c00000
#define CLKMGR_VCO_SSRC_EOSC1 0x0
#define CLKMGR_VCO_SSRC_EOSC2 0x1
#define CLKMGR_VCO_SSRC_F2S 0x2
#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_OFFSET 0
#define CLKMGR_PERPLLGRP_EMAC0CLK_CNT_MASK 0x000001ff
#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_OFFSET 0
#define CLKMGR_PERPLLGRP_EMAC1CLK_CNT_MASK 0x000001ff
#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_OFFSET 0
#define CLKMGR_PERPLLGRP_PERQSPICLK_CNT_MASK 0x000001ff
#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_OFFSET 0
#define CLKMGR_PERPLLGRP_PERNANDSDMMCCLK_CNT_MASK 0x000001ff
#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_OFFSET 0
#define CLKMGR_PERPLLGRP_PERBASECLK_CNT_MASK 0x000001ff
#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_OFFSET 0
#define CLKMGR_PERPLLGRP_S2FUSER1CLK_CNT_MASK 0x000001ff
#define CLKMGR_PERPLLGRP_EN_NANDCLK_MASK 0x00000400
#define CLKMGR_PERPLLGRP_EN_SDMMCCLK_MASK 0x00000100
#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_OFFSET 6
#define CLKMGR_PERPLLGRP_DIV_CAN0CLK_MASK 0x000001c0
#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_OFFSET 9
#define CLKMGR_PERPLLGRP_DIV_CAN1CLK_MASK 0x00000e00
#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
#define CLKMGR_PERPLLGRP_DIV_SPIMCLK_OFFSET 3
#define CLKMGR_PERPLLGRP_DIV_USBCLK_OFFSET 0
#define CLKMGR_PERPLLGRP_DIV_USBCLK_MASK 0x00000007
#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_OFFSET 0
#define CLKMGR_PERPLLGRP_GPIODIV_GPIODBCLK_MASK 0x00ffffff
#define CLKMGR_PERPLLGRP_SRC_NAND_OFFSET 2
#define CLKMGR_PERPLLGRP_SRC_NAND_MASK 0x0000000c
#define CLKMGR_PERPLLGRP_SRC_QSPI_OFFSET 4
#define CLKMGR_PERPLLGRP_SRC_QSPI_MASK 0x00000030
#define CLKMGR_PERPLLGRP_SRC_RESET_VALUE 0x00000015
#define CLKMGR_PERPLLGRP_SRC_SDMMC_OFFSET 0
#define CLKMGR_PERPLLGRP_SRC_SDMMC_MASK 0x00000003
#define CLKMGR_SDMMC_CLK_SRC_F2S 0x0
#define CLKMGR_SDMMC_CLK_SRC_MAIN 0x1
#define CLKMGR_SDMMC_CLK_SRC_PER 0x2
#define CLKMGR_QSPI_CLK_SRC_F2S 0x0
#define CLKMGR_QSPI_CLK_SRC_MAIN 0x1
#define CLKMGR_QSPI_CLK_SRC_PER 0x2
/* SDR PLL */
#define CLKMGR_SDRPLLGRP_VCO_DENOM_OFFSET 16
#define CLKMGR_SDRPLLGRP_VCO_DENOM_MASK 0x003f0000
#define CLKMGR_SDRPLLGRP_VCO_NUMER_OFFSET 3
#define CLKMGR_SDRPLLGRP_VCO_NUMER_MASK 0x0000fff8
#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL (1 << 24)
#define CLKMGR_SDRPLLGRP_VCO_OUTRESETALL_OFFSET 24
#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_OFFSET 25
#define CLKMGR_SDRPLLGRP_VCO_OUTRESET_MASK 0x7e000000
#define CLKMGR_SDRPLLGRP_VCO_REGEXTSEL_MASK 0x80000000
#define CLKMGR_SDRPLLGRP_VCO_RESET_VALUE 0x8001000d
#define CLKMGR_SDRPLLGRP_VCO_SSRC_OFFSET 22
#define CLKMGR_SDRPLLGRP_VCO_SSRC_MASK 0x00c00000
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_OFFSET 0
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_CNT_MASK 0x000001ff
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_OFFSET 9
#define CLKMGR_SDRPLLGRP_DDRDQSCLK_PHASE_MASK 0x00000e00
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_OFFSET 0
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_CNT_MASK 0x000001ff
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_OFFSET 9
#define CLKMGR_SDRPLLGRP_DDR2XDQSCLK_PHASE_MASK 0x00000e00
#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_OFFSET 0
#define CLKMGR_SDRPLLGRP_DDRDQCLK_CNT_MASK 0x000001ff
#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_OFFSET 9
#define CLKMGR_SDRPLLGRP_DDRDQCLK_PHASE_MASK 0x00000e00
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_OFFSET 0
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_CNT_MASK 0x000001ff
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_OFFSET 9
#define CLKMGR_SDRPLLGRP_S2FUSER2CLK_PHASE_MASK 0x00000e00
#endif /* _CLOCK_MANAGER_H_ */
arch/arm/include/asm/arch-socfpga/fpga_manager.h 0 → 100644
浏览文件 @ 04de09f8
/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#ifndef _FPGA_MANAGER_H_
#define _FPGA_MANAGER_H_
#include <altera.h>
struct socfpga_fpga_manager {
/* FPGA Manager Module */
u32 stat; /* 0x00 */
u32 ctrl;
u32 dclkcnt;
u32 dclkstat;
u32 gpo; /* 0x10 */
u32 gpi;
u32 misci; /* 0x18 */
u32 _pad_0x1c_0x82c[517];
/* Configuration Monitor (MON) Registers */
u32 gpio_inten; /* 0x830 */
u32 gpio_intmask;
u32 gpio_inttype_level;
u32 gpio_int_polarity;
u32 gpio_intstatus; /* 0x840 */
u32 gpio_raw_intstatus;
u32 _pad_0x848;
u32 gpio_porta_eoi;
u32 gpio_ext_porta; /* 0x850 */
u32 _pad_0x854_0x85c[3];
u32 gpio_1s_sync; /* 0x860 */
u32 _pad_0x864_0x868[2];
u32 gpio_ver_id_code;
u32 gpio_config_reg2; /* 0x870 */
u32 gpio_config_reg1;
};
#define FPGAMGRREGS_STAT_MODE_MASK 0x7
#define FPGAMGRREGS_STAT_MSEL_MASK 0xf8
#define FPGAMGRREGS_STAT_MSEL_LSB 3
#define FPGAMGRREGS_CTRL_CFGWDTH_MASK 0x200
#define FPGAMGRREGS_CTRL_AXICFGEN_MASK 0x100
#define FPGAMGRREGS_CTRL_NCONFIGPULL_MASK 0x4
#define FPGAMGRREGS_CTRL_NCE_MASK 0x2
#define FPGAMGRREGS_CTRL_EN_MASK 0x1
#define FPGAMGRREGS_CTRL_CDRATIO_LSB 6
#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CRC_MASK 0x8
#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_ID_MASK 0x4
#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK 0x2
#define FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK 0x1
/* FPGA Mode */
#define FPGAMGRREGS_MODE_FPGAOFF 0x0
#define FPGAMGRREGS_MODE_RESETPHASE 0x1
#define FPGAMGRREGS_MODE_CFGPHASE 0x2
#define FPGAMGRREGS_MODE_INITPHASE 0x3
#define FPGAMGRREGS_MODE_USERMODE 0x4
#define FPGAMGRREGS_MODE_UNKNOWN 0x5
/* FPGA CD Ratio Value */
#define CDRATIO_x1 0x0
#define CDRATIO_x2 0x1
#define CDRATIO_x4 0x2
#define CDRATIO_x8 0x3
/* SoCFPGA support functions */
int fpgamgr_test_fpga_ready(void);
int fpgamgr_poll_fpga_ready(void);
int fpgamgr_get_mode(void);
#endif /* _FPGA_MANAGER_H_ */
arch/arm/include/asm/arch-socfpga/nic301.h 0 → 100644
浏览文件 @ 04de09f8
/*
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _NIC301_REGISTERS_H_
#define _NIC301_REGISTERS_H_
struct nic301_registers {
u32 remap; /* 0x0 */
/* Security Register Group */
u32 _pad_0x4_0x8[1];
u32 l4main;
u32 l4sp;
u32 l4mp; /* 0x10 */
u32 l4osc1;
u32 l4spim;
u32 stm;
u32 lwhps2fpgaregs; /* 0x20 */
u32 _pad_0x24_0x28[1];
u32 usb1;
u32 nanddata;
u32 _pad_0x30_0x80[20];
u32 usb0; /* 0x80 */
u32 nandregs;
u32 qspidata;
u32 fpgamgrdata;
u32 hps2fpgaregs; /* 0x90 */
u32 acp;
u32 rom;
u32 ocram;
u32 sdrdata; /* 0xA0 */
u32 _pad_0xa4_0x1fd0[1995];
/* ID Register Group */
u32 periph_id_4; /* 0x1FD0 */
u32 _pad_0x1fd4_0x1fe0[3];
u32 periph_id_0; /* 0x1FE0 */
u32 periph_id_1;
u32 periph_id_2;
u32 periph_id_3;
u32 comp_id_0; /* 0x1FF0 */
u32 comp_id_1;
u32 comp_id_2;
u32 comp_id_3;
u32 _pad_0x2000_0x2008[2];
/* L4 MAIN */
u32 l4main_fn_mod_bm_iss;
u32 _pad_0x200c_0x3008[1023];
/* L4 SP */
u32 l4sp_fn_mod_bm_iss;
u32 _pad_0x300c_0x4008[1023];
/* L4 MP */
u32 l4mp_fn_mod_bm_iss;
u32 _pad_0x400c_0x5008[1023];
/* L4 OSC1 */
u32 l4osc_fn_mod_bm_iss;
u32 _pad_0x500c_0x6008[1023];
/* L4 SPIM */
u32 l4spim_fn_mod_bm_iss;
u32 _pad_0x600c_0x7008[1023];
/* STM */
u32 stm_fn_mod_bm_iss;
u32 _pad_0x700c_0x7108[63];
u32 stm_fn_mod;
u32 _pad_0x710c_0x8008[959];
/* LWHPS2FPGA */
u32 lwhps2fpga_fn_mod_bm_iss;
u32 _pad_0x800c_0x8108[63];
u32 lwhps2fpga_fn_mod;
u32 _pad_0x810c_0xa008[1983];
/* USB1 */
u32 usb1_fn_mod_bm_iss;
u32 _pad_0xa00c_0xa044[14];
u32 usb1_ahb_cntl;
u32 _pad_0xa048_0xb008[1008];
/* NANDDATA */
u32 nanddata_fn_mod_bm_iss;
u32 _pad_0xb00c_0xb108[63];
u32 nanddata_fn_mod;
u32 _pad_0xb10c_0x20008[21439];
/* USB0 */
u32 usb0_fn_mod_bm_iss;
u32 _pad_0x2000c_0x20044[14];
u32 usb0_ahb_cntl;
u32 _pad_0x20048_0x21008[1008];
/* NANDREGS */
u32 nandregs_fn_mod_bm_iss;
u32 _pad_0x2100c_0x21108[63];
u32 nandregs_fn_mod;
u32 _pad_0x2110c_0x22008[959];
/* QSPIDATA */
u32 qspidata_fn_mod_bm_iss;
u32 _pad_0x2200c_0x22044[14];
u32 qspidata_ahb_cntl;
u32 _pad_0x22048_0x23008[1008];
/* FPGAMGRDATA */
u32 fpgamgrdata_fn_mod_bm_iss;
u32 _pad_0x2300c_0x23040[13];
u32 fpgamgrdata_wr_tidemark; /* 0x23040 */
u32 _pad_0x23044_0x23108[49];
u32 fn_mod;
u32 _pad_0x2310c_0x24008[959];
/* HPS2FPGA */
u32 hps2fpga_fn_mod_bm_iss;
u32 _pad_0x2400c_0x24040[13];
u32 hps2fpga_wr_tidemark; /* 0x24040 */
u32 _pad_0x24044_0x24108[49];
u32 hps2fpga_fn_mod;
u32 _pad_0x2410c_0x25008[959];
/* ACP */
u32 acp_fn_mod_bm_iss;
u32 _pad_0x2500c_0x25108[63];
u32 acp_fn_mod;
u32 _pad_0x2510c_0x26008[959];
/* Boot ROM */
u32 bootrom_fn_mod_bm_iss;
u32 _pad_0x2600c_0x26108[63];
u32 bootrom_fn_mod;
u32 _pad_0x2610c_0x27008[959];
/* On-chip RAM */
u32 ocram_fn_mod_bm_iss;
u32 _pad_0x2700c_0x27040[13];
u32 ocram_wr_tidemark; /* 0x27040 */
u32 _pad_0x27044_0x27108[49];
u32 ocram_fn_mod;
u32 _pad_0x2710c_0x42024[27590];
/* DAP */
u32 dap_fn_mod2;
u32 dap_fn_mod_ahb;
u32 _pad_0x4202c_0x42100[53];
u32 dap_read_qos; /* 0x42100 */
u32 dap_write_qos;
u32 dap_fn_mod;
u32 _pad_0x4210c_0x43100[1021];
/* MPU */
u32 mpu_read_qos; /* 0x43100 */
u32 mpu_write_qos;
u32 mpu_fn_mod;
u32 _pad_0x4310c_0x44028[967];
/* SDMMC */
u32 sdmmc_fn_mod_ahb;
u32 _pad_0x4402c_0x44100[53];
u32 sdmmc_read_qos; /* 0x44100 */
u32 sdmmc_write_qos;
u32 sdmmc_fn_mod;
u32 _pad_0x4410c_0x45100[1021];
/* DMA */
u32 dma_read_qos; /* 0x45100 */
u32 dma_write_qos;
u32 dma_fn_mod;
u32 _pad_0x4510c_0x46040[973];
/* FPGA2HPS */
u32 fpga2hps_wr_tidemark; /* 0x46040 */
u32 _pad_0x46044_0x46100[47];
u32 fpga2hps_read_qos; /* 0x46100 */
u32 fpga2hps_write_qos;
u32 fpga2hps_fn_mod;
u32 _pad_0x4610c_0x47100[1021];
/* ETR */
u32 etr_read_qos; /* 0x47100 */
u32 etr_write_qos;
u32 etr_fn_mod;
u32 _pad_0x4710c_0x48100[1021];
/* EMAC0 */
u32 emac0_read_qos; /* 0x48100 */
u32 emac0_write_qos;
u32 emac0_fn_mod;
u32 _pad_0x4810c_0x49100[1021];
/* EMAC1 */
u32 emac1_read_qos; /* 0x49100 */
u32 emac1_write_qos;
u32 emac1_fn_mod;
u32 _pad_0x4910c_0x4a028[967];
/* USB0 */
u32 usb0_fn_mod_ahb;
u32 _pad_0x4a02c_0x4a100[53];
u32 usb0_read_qos; /* 0x4A100 */
u32 usb0_write_qos;
u32 usb0_fn_mod;
u32 _pad_0x4a10c_0x4b100[1021];
/* NAND */
u32 nand_read_qos; /* 0x4B100 */
u32 nand_write_qos;
u32 nand_fn_mod;
u32 _pad_0x4b10c_0x4c028[967];
/* USB1 */
u32 usb1_fn_mod_ahb;
u32 _pad_0x4c02c_0x4c100[53];
u32 usb1_read_qos; /* 0x4C100 */
u32 usb1_write_qos;
u32 usb1_fn_mod;
};
#endif /* _NIC301_REGISTERS_H_ */
arch/arm/include/asm/arch-socfpga/reset_manager.h
浏览文件 @ 04de09f8
......@@ -10,6 +10,11 @@
void reset_cpu(ulong addr);
void reset_deassert_peripherals_handoff(void);
void socfpga_bridges_reset(int enable);
void socfpga_emac_reset(int enable);
void socfpga_watchdog_reset(void);
struct socfpga_reset_manager {
u32 status;
u32 ctrl;
......@@ -27,4 +32,8 @@ struct socfpga_reset_manager {
#define RSTMGR_CTRL_SWWARMRSTREQ_LSB 1
#endif
#define RSTMGR_PERMODRST_EMAC0_LSB 0
#define RSTMGR_PERMODRST_EMAC1_LSB 1
#define RSTMGR_PERMODRST_L4WD0_LSB 6
#endif /* _RESET_MANAGER_H_ */
arch/arm/include/asm/arch-socfpga/scu.h 0 → 100644
浏览文件 @ 04de09f8
/*
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __SOCFPGA_SCU_H__
#define __SOCFPGA_SCU_H__
struct scu_registers {
u32 ctrl; /* 0x00 */
u32 cfg;
u32 cpsr;
u32 iassr;
u32 _pad_0x10_0x3c[12]; /* 0x10 */
u32 fsar; /* 0x40 */
u32 fear;
u32 _pad_0x48_0x50[2];
u32 acr; /* 0x54 */
u32 sacr;
};
#endif /* __SOCFPGA_SCU_H__ */
arch/arm/include/asm/arch-socfpga/socfpga_base_addrs.h
浏览文件 @ 04de09f8
......@@ -7,16 +7,56 @@
#ifndef _SOCFPGA_BASE_ADDRS_H_
#define _SOCFPGA_BASE_ADDRS_H_
#define SOCFPGA_L3REGS_ADDRESS 0xff800000
#define SOCFPGA_UART0_ADDRESS 0xffc02000
#define SOCFPGA_UART1_ADDRESS 0xffc03000
#define SOCFPGA_OSC1TIMER0_ADDRESS 0xffd00000
#define SOCFPGA_L4WD0_ADDRESS 0xffd02000
#define SOCFPGA_CLKMGR_ADDRESS 0xffd04000
#define SOCFPGA_RSTMGR_ADDRESS 0xffd05000
#define SOCFPGA_SYSMGR_ADDRESS 0xffd08000
#define SOCFPGA_SCANMGR_ADDRESS 0xfff02000
#define SOCFPGA_EMAC0_ADDRESS 0xff700000
#define SOCFPGA_EMAC1_ADDRESS 0xff702000
#define SOCFPGA_STM_ADDRESS 0xfc000000
#define SOCFPGA_DAP_ADDRESS 0xff000000
#define SOCFPGA_EMAC0_ADDRESS 0xff700000
#define SOCFPGA_EMAC1_ADDRESS 0xff702000
#define SOCFPGA_SDMMC_ADDRESS 0xff704000
#define SOCFPGA_QSPI_ADDRESS 0xff705000
#define SOCFPGA_GPIO0_ADDRESS 0xff708000
#define SOCFPGA_GPIO1_ADDRESS 0xff709000
#define SOCFPGA_GPIO2_ADDRESS 0xff70a000
#define SOCFPGA_L3REGS_ADDRESS 0xff800000
#define SOCFPGA_USB0_ADDRESS 0xffb00000
#define SOCFPGA_USB1_ADDRESS 0xffb40000
#define SOCFPGA_CAN0_ADDRESS 0xffc00000
#define SOCFPGA_CAN1_ADDRESS 0xffc01000
#define SOCFPGA_UART0_ADDRESS 0xffc02000
#define SOCFPGA_UART1_ADDRESS 0xffc03000
#define SOCFPGA_I2C0_ADDRESS 0xffc04000
#define SOCFPGA_I2C1_ADDRESS 0xffc05000
#define SOCFPGA_I2C2_ADDRESS 0xffc06000
#define SOCFPGA_I2C3_ADDRESS 0xffc07000
#define SOCFPGA_SDR_ADDRESS 0xffc20000
#define SOCFPGA_L4WD0_ADDRESS 0xffd02000
#define SOCFPGA_L4WD1_ADDRESS 0xffd03000
#define SOCFPGA_CLKMGR_ADDRESS 0xffd04000
#define SOCFPGA_RSTMGR_ADDRESS 0xffd05000
#define SOCFPGA_SYSMGR_ADDRESS 0xffd08000
#define SOCFPGA_SPIS0_ADDRESS 0xffe02000
#define SOCFPGA_SPIS1_ADDRESS 0xffe03000
#define SOCFPGA_SPIM0_ADDRESS 0xfff00000
#define SOCFPGA_SPIM1_ADDRESS 0xfff01000
#define SOCFPGA_SCANMGR_ADDRESS 0xfff02000
#define SOCFPGA_ROM_ADDRESS 0xfffd0000
#define SOCFPGA_MPUSCU_ADDRESS 0xfffec000
#define SOCFPGA_MPUL2_ADDRESS 0xfffef000
#define SOCFPGA_OCRAM_ADDRESS 0xffff0000
#define SOCFPGA_LWFPGASLAVES_ADDRESS 0xff200000
#define SOCFPGA_LWHPS2FPGAREGS_ADDRESS 0xff400000
#define SOCFPGA_HPS2FPGAREGS_ADDRESS 0xff500000
#define SOCFPGA_FPGA2HPSREGS_ADDRESS 0xff600000
#define SOCFPGA_FPGAMGRREGS_ADDRESS 0xff706000
#define SOCFPGA_ACPIDMAP_ADDRESS 0xff707000
#define SOCFPGA_NANDDATA_ADDRESS 0xff900000
#define SOCFPGA_QSPIDATA_ADDRESS 0xffa00000
#define SOCFPGA_NANDREGS_ADDRESS 0xffb80000
#define SOCFPGA_FPGAMGRDATA_ADDRESS 0xffb90000
#define SOCFPGA_SPTIMER0_ADDRESS 0xffc08000
#define SOCFPGA_SPTIMER1_ADDRESS 0xffc09000
#define SOCFPGA_OSC1TIMER0_ADDRESS 0xffd00000
#define SOCFPGA_OSC1TIMER1_ADDRESS 0xffd01000
#define SOCFPGA_DMANONSECURE_ADDRESS 0xffe00000
#define SOCFPGA_DMASECURE_ADDRESS 0xffe01000
#endif /* _SOCFPGA_BASE_ADDRS_H_ */
arch/arm/include/asm/arch-socfpga/system_manager.h
浏览文件 @ 04de09f8
/*
* Copyright (C) 2013 Altera Corporation <www.altera.com>
* Copyright (C) 2013 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
......@@ -16,72 +16,131 @@ extern unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM];
#endif
#define CONFIG_SYSMGR_PINMUXGRP_OFFSET (0x400)
#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38))
struct socfpga_system_manager {
u32 siliconid1;
/* System Manager Module */
u32 siliconid1; /* 0x00 */
u32 siliconid2;
u32 _pad_0x8_0xf[2];
u32 wddbg;
u32 wddbg; /* 0x10 */
u32 bootinfo;
u32 hpsinfo;
u32 parityinj;
u32 fpgaintfgrp_gbl;
/* FPGA Interface Group */
u32 fpgaintfgrp_gbl; /* 0x20 */
u32 fpgaintfgrp_indiv;
u32 fpgaintfgrp_module;
u32 _pad_0x2c_0x2f;
u32 scanmgrgrp_ctrl;
/* Scan Manager Group */
u32 scanmgrgrp_ctrl; /* 0x30 */
u32 _pad_0x34_0x3f[3];
u32 frzctrl_vioctrl;
/* Freeze Control Group */
u32 frzctrl_vioctrl; /* 0x40 */
u32 _pad_0x44_0x4f[3];
u32 frzctrl_hioctrl;
u32 frzctrl_hioctrl; /* 0x50 */
u32 frzctrl_src;
u32 frzctrl_hwctrl;
u32 _pad_0x5c_0x5f;
u32 emacgrp_ctrl;
/* EMAC Group */
u32 emacgrp_ctrl; /* 0x60 */
u32 emacgrp_l3master;
u32 _pad_0x68_0x6f[2];
u32 dmagrp_ctrl;
/* DMA Controller Group */
u32 dmagrp_ctrl; /* 0x70 */
u32 dmagrp_persecurity;
u32 _pad_0x78_0x7f[2];
u32 iswgrp_handoff[8];
u32 _pad_0xa0_0xbf[8];
u32 romcodegrp_ctrl;
/* Preloader (initial software) Group */
u32 iswgrp_handoff[8]; /* 0x80 */
u32 _pad_0xa0_0xbf[8]; /* 0xa0 */
/* Boot ROM Code Register Group */
u32 romcodegrp_ctrl; /* 0xc0 */
u32 romcodegrp_cpu1startaddr;
u32 romcodegrp_initswstate;
u32 romcodegrp_initswlastld;
u32 romcodegrp_bootromswstate;
u32 romcodegrp_bootromswstate; /* 0xd0 */
u32 __pad_0xd4_0xdf[3];
u32 romcodegrp_warmramgrp_enable;
/* Warm Boot from On-Chip RAM Group */
u32 romcodegrp_warmramgrp_enable; /* 0xe0 */
u32 romcodegrp_warmramgrp_datastart;
u32 romcodegrp_warmramgrp_length;
u32 romcodegrp_warmramgrp_execution;
u32 romcodegrp_warmramgrp_crc;
u32 romcodegrp_warmramgrp_crc; /* 0xf0 */
u32 __pad_0xf4_0xff[3];
u32 romhwgrp_ctrl;
/* Boot ROM Hardware Register Group */
u32 romhwgrp_ctrl; /* 0x100 */
u32 _pad_0x104_0x107;
/* SDMMC Controller Group */
u32 sdmmcgrp_ctrl;
u32 sdmmcgrp_l3master;
u32 nandgrp_bootstrap;
/* NAND Flash Controller Register Group */
u32 nandgrp_bootstrap; /* 0x110 */
u32 nandgrp_l3master;
/* USB Controller Group */
u32 usbgrp_l3master;
u32 _pad_0x11c_0x13f[9];
u32 eccgrp_l2;
/* ECC Management Register Group */
u32 eccgrp_l2; /* 0x140 */
u32 eccgrp_ocram;
u32 eccgrp_usb0;
u32 eccgrp_usb1;
u32 eccgrp_emac0;
u32 eccgrp_emac0; /* 0x150 */
u32 eccgrp_emac1;
u32 eccgrp_dma;
u32 eccgrp_can0;
u32 eccgrp_can1;
u32 eccgrp_can1; /* 0x160 */
u32 eccgrp_nand;
u32 eccgrp_qspi;
u32 eccgrp_sdmmc;
u32 _pad_0x170_0x3ff[164];
/* Pin Mux Control Group */
u32 emacio[20]; /* 0x400 */
u32 flashio[12]; /* 0x450 */
u32 generalio[28]; /* 0x480 */
u32 _pad_0x4f0_0x4ff[4];
u32 mixed1io[22]; /* 0x500 */
u32 mixed2io[8]; /* 0x558 */
u32 gplinmux[23]; /* 0x578 */
u32 gplmux[71]; /* 0x5d4 */
u32 nandusefpga; /* 0x6f0 */
u32 _pad_0x6f4;
u32 rgmii1usefpga; /* 0x6f8 */
u32 _pad_0x6fc_0x700[2];
u32 i2c0usefpga; /* 0x704 */
u32 sdmmcusefpga; /* 0x708 */
u32 _pad_0x70c_0x710[2];
u32 rgmii0usefpga; /* 0x714 */
u32 _pad_0x718_0x720[3];
u32 i2c3usefpga; /* 0x724 */
u32 i2c2usefpga; /* 0x728 */
u32 i2c1usefpga; /* 0x72c */
u32 spim1usefpga; /* 0x730 */
u32 _pad_0x734;
u32 spim0usefpga; /* 0x738 */
};
#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGPINMUX (1 << 0)
#define SYSMGR_ROMCODEGRP_CTRL_WARMRSTCFGIO (1 << 1)
#define SYSMGR_ECC_OCRAM_EN (1 << 0)
#define SYSMGR_ECC_OCRAM_SERR (1 << 3)
#define SYSMGR_ECC_OCRAM_DERR (1 << 4)
#define SYSMGR_FPGAINTF_USEFPGA 0x1
#define SYSMGR_FPGAINTF_SPIM0 (1 << 0)
#define SYSMGR_FPGAINTF_SPIM1 (1 << 1)
#define SYSMGR_FPGAINTF_EMAC0 (1 << 2)
#define SYSMGR_FPGAINTF_EMAC1 (1 << 3)
#define SYSMGR_FPGAINTF_NAND (1 << 4)
#define SYSMGR_FPGAINTF_SDMMC (1 << 5)
/* FIXME: This is questionable macro. */
#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38))
/* EMAC Group Bit definitions */
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
#define SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB 0
#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB 2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x3
#endif /* _SYSTEM_MANAGER_H_ */
arch/arm/include/asm/system.h
浏览文件 @ 04de09f8
......@@ -185,6 +185,7 @@ enum dcache_option {
DCACHE_OFF = 0x12,
DCACHE_WRITETHROUGH = 0x1a,
DCACHE_WRITEBACK = 0x1e,
DCACHE_WRITEALLOC = 0x16,
};
/* Size of an MMU section */
......
arch/arm/lib/cache-cp15.c
浏览文件 @ 04de09f8
......@@ -73,6 +73,8 @@ __weak void dram_bank_mmu_setup(int bank)
i++) {
#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH)
set_section_dcache(i, DCACHE_WRITETHROUGH);
#elif defined(CONFIG_SYS_ARM_CACHE_WRITEALLOC)
set_section_dcache(i, DCACHE_WRITEALLOC);
#else
set_section_dcache(i, DCACHE_WRITEBACK);
#endif
......
board/altera/socfpga/pll_config.h
浏览文件 @ 04de09f8
......@@ -94,6 +94,9 @@
/* Info for driver */
#define CONFIG_HPS_CLK_OSC1_HZ (25000000)
#define CONFIG_HPS_CLK_OSC2_HZ 0
#define CONFIG_HPS_CLK_F2S_SDR_REF_HZ 0
#define CONFIG_HPS_CLK_F2S_PER_REF_HZ 0
#define CONFIG_HPS_CLK_MAINVCO_HZ (1600000000)
#define CONFIG_HPS_CLK_PERVCO_HZ (1000000000)
#ifdef CONFIG_SOCFPGA_ARRIA5
......
board/altera/socfpga/socfpga_cyclone5.c
浏览文件 @ 04de09f8
......@@ -17,7 +17,7 @@ DECLARE_GLOBAL_DATA_PTR;
*/
int checkboard(void)
{
puts("BOARD : Altera SOCFPGA Cyclone5 Board\n");
puts("BOARD: Altera SoCFPGA Cyclone5 Board\n");
return 0;
}
......@@ -34,6 +34,8 @@ int board_early_init_f(void)
*/
int board_init(void)
{
icache_enable();
/* Address of boot parameters for ATAG (if ATAG is used) */
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
return 0;
}
common/image.c
浏览文件 @ 04de09f8
......@@ -138,6 +138,7 @@ static const table_entry_t uimage_type[] = {
{ IH_TYPE_PBLIMAGE, "pblimage", "Freescale PBL Boot Image",},
{ IH_TYPE_RAMDISK, "ramdisk", "RAMDisk Image", },
{ IH_TYPE_SCRIPT, "script", "Script", },
{ IH_TYPE_SOCFPGAIMAGE, "socfpgaimage", "Altera SOCFPGA preloader",},
{ IH_TYPE_STANDALONE, "standalone", "Standalone Program", },
{ IH_TYPE_UBLIMAGE, "ublimage", "Davinci UBL image",},
{ IH_TYPE_MXSIMAGE, "mxsimage", "Freescale MXS Boot Image",},
......
drivers/fpga/Makefile
浏览文件 @ 04de09f8
......@@ -17,4 +17,5 @@ obj-y += altera.o
obj-$(CONFIG_FPGA_ACEX1K) += ACEX1K.o
obj-$(CONFIG_FPGA_CYCLON2) += cyclon2.o
obj-$(CONFIG_FPGA_STRATIX_II) += stratixII.o
obj-$(CONFIG_FPGA_SOCFPGA) += socfpga.o
endif
drivers/fpga/altera.c
浏览文件 @ 04de09f8
......@@ -12,216 +12,162 @@
* Altera FPGA support
*/
#include <common.h>
#include <errno.h>
#include <ACEX1K.h>
#include <stratixII.h>
/* Define FPGA_DEBUG to get debug printf's */
/* #define FPGA_DEBUG */
/* Define FPGA_DEBUG to 1 to get debug printf's */
#define FPGA_DEBUG 0
#ifdef FPGA_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
/* Local Static Functions */
static int altera_validate (Altera_desc * desc, const char *fn);
/* ------------------------------------------------------------------------- */
int altera_load(Altera_desc *desc, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL; /* assume a failure */
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
static const struct altera_fpga {
enum altera_family family;
const char *name;
int (*load)(Altera_desc *, const void *, size_t);
int (*dump)(Altera_desc *, const void *, size_t);
int (*info)(Altera_desc *);
} altera_fpga[] = {
#if defined(CONFIG_FPGA_ACEX1K)
PRINTF ("%s: Launching the ACEX1K Loader...\n",
__FUNCTION__);
ret_val = ACEX1K_load (desc, buf, bsize);
{ Altera_ACEX1K, "ACEX1K", ACEX1K_load, ACEX1K_dump, ACEX1K_info },
{ Altera_CYC2, "ACEX1K", ACEX1K_load, ACEX1K_dump, ACEX1K_info },
#elif defined(CONFIG_FPGA_CYCLON2)
PRINTF ("%s: Launching the CYCLONE II Loader...\n",
__FUNCTION__);
ret_val = CYC2_load (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
{ Altera_ACEX1K, "CycloneII", CYC2_load, CYC2_dump, CYC2_info },
{ Altera_CYC2, "CycloneII", CYC2_load, CYC2_dump, CYC2_info },
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
PRINTF ("%s: Launching the Stratix II Loader...\n",
__FUNCTION__);
ret_val = StratixII_load (desc, buf, bsize);
break;
{ Altera_StratixII, "StratixII", StratixII_load,
StratixII_dump, StratixII_info },
#endif
#if defined(CONFIG_FPGA_SOCFPGA)
{ Altera_SoCFPGA, "SoC FPGA", socfpga_load, NULL, NULL },
#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
};
static int altera_validate(Altera_desc *desc, const char *fn)
{
if (!desc) {
printf("%s: NULL descriptor!\n", fn);
return -EINVAL;
}
if ((desc->family < min_altera_type) ||
(desc->family > max_altera_type)) {
printf("%s: Invalid family type, %d\n", fn, desc->family);
return -EINVAL;
}
if ((desc->iface < min_altera_iface_type) ||
(desc->iface > max_altera_iface_type)) {
printf("%s: Invalid Interface type, %d\n", fn, desc->iface);
return -EINVAL;
}
return ret_val;
if (!desc->size) {
printf("%s: NULL part size\n", fn);
return -EINVAL;
}
return 0;
}
int altera_dump(Altera_desc *desc, const void *buf, size_t bsize)
static const struct altera_fpga *
altera_desc_to_fpga(Altera_desc *desc, const char *fn)
{
int ret_val = FPGA_FAIL; /* assume a failure */
int i;
if (!altera_validate (desc, (char *)__FUNCTION__)) {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
} else {
switch (desc->family) {
case Altera_ACEX1K:
#if defined(CONFIG_FPGA_ACEX)
PRINTF ("%s: Launching the ACEX1K Reader...\n",
__FUNCTION__);
ret_val = ACEX1K_dump (desc, buf, bsize);
#else
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
if (altera_validate(desc, fn)) {
printf("%s: Invalid device descriptor\n", fn);
return NULL;
}
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
PRINTF ("%s: Launching the Stratix II Reader...\n",
__FUNCTION__);
ret_val = StratixII_dump (desc, buf, bsize);
for (i = 0; i < ARRAY_SIZE(altera_fpga); i++) {
if (desc->family == altera_fpga[i].family)
break;
#endif
default:
printf ("%s: Unsupported family type, %d\n",
__FUNCTION__, desc->family);
}
}
return ret_val;
if (i == ARRAY_SIZE(altera_fpga)) {
printf("%s: Unsupported family type, %d\n", fn, desc->family);
return NULL;
}
return &altera_fpga[i];
}
int altera_info( Altera_desc *desc )
int altera_load(Altera_desc *desc, const void *buf, size_t bsize)
{
int ret_val = FPGA_FAIL;
const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__);
if (altera_validate (desc, (char *)__FUNCTION__)) {
printf ("Family: \t");
switch (desc->family) {
case Altera_ACEX1K:
printf ("ACEX1K\n");
break;
case Altera_CYC2:
printf ("CYCLON II\n");
break;
case Altera_StratixII:
printf ("Stratix II\n");
break;
/* Add new family types here */
default:
printf ("Unknown family type, %d\n", desc->family);
}
printf ("Interface type:\t");
switch (desc->iface) {
case passive_serial:
printf ("Passive Serial (PS)\n");
break;
case passive_parallel_synchronous:
printf ("Passive Parallel Synchronous (PPS)\n");
break;
case passive_parallel_asynchronous:
printf ("Passive Parallel Asynchronous (PPA)\n");
break;
case passive_serial_asynchronous:
printf ("Passive Serial Asynchronous (PSA)\n");
break;
case altera_jtag_mode: /* Not used */
printf ("JTAG Mode\n");
break;
case fast_passive_parallel:
printf ("Fast Passive Parallel (FPP)\n");
break;
case fast_passive_parallel_security:
printf
("Fast Passive Parallel with Security (FPPS) \n");
break;
/* Add new interface types here */
default:
printf ("Unsupported interface type, %d\n", desc->iface);
}
printf("Device Size: \t%zd bytes\n"
"Cookie: \t0x%x (%d)\n",
desc->size, desc->cookie, desc->cookie);
if (desc->iface_fns) {
printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
switch (desc->family) {
case Altera_ACEX1K:
case Altera_CYC2:
#if defined(CONFIG_FPGA_ACEX1K)
ACEX1K_info (desc);
#elif defined(CONFIG_FPGA_CYCLON2)
CYC2_info (desc);
#else
/* just in case */
printf ("%s: No support for ACEX1K devices.\n",
__FUNCTION__);
#endif
break;
#if defined(CONFIG_FPGA_STRATIX_II)
case Altera_StratixII:
StratixII_info (desc);
break;
#endif
/* Add new family types here */
default:
/* we don't need a message here - we give one up above */
break;
}
} else {
printf ("No Device Function Table.\n");
}
ret_val = FPGA_SUCCESS;
} else {
printf ("%s: Invalid device descriptor\n", __FUNCTION__);
}
if (!fpga)
return FPGA_FAIL;
return ret_val;
debug_cond(FPGA_DEBUG, "%s: Launching the %s Loader...\n",
__func__, fpga->name);
if (fpga->load)
return fpga->load(desc, buf, bsize);
return 0;
}
/* ------------------------------------------------------------------------- */
int altera_dump(Altera_desc *desc, const void *buf, size_t bsize)
{
const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__);
if (!fpga)
return FPGA_FAIL;
static int altera_validate (Altera_desc * desc, const char *fn)
debug_cond(FPGA_DEBUG, "%s: Launching the %s Reader...\n",
__func__, fpga->name);
if (fpga->dump)
return fpga->dump(desc, buf, bsize);
return 0;
}
int altera_info(Altera_desc *desc)
{
int ret_val = false;
if (desc) {
if ((desc->family > min_altera_type) &&
(desc->family < max_altera_type)) {
if ((desc->iface > min_altera_iface_type) &&
(desc->iface < max_altera_iface_type)) {
if (desc->size) {
ret_val = true;
} else {
printf ("%s: NULL part size\n", fn);
}
} else {
printf ("%s: Invalid Interface type, %d\n",
fn, desc->iface);
}
} else {
printf ("%s: Invalid family type, %d\n", fn, desc->family);
}
const struct altera_fpga *fpga = altera_desc_to_fpga(desc, __func__);
if (!fpga)
return FPGA_FAIL;
printf("Family: \t%s\n", fpga->name);
printf("Interface type:\t");
switch (desc->iface) {
case passive_serial:
printf("Passive Serial (PS)\n");
break;
case passive_parallel_synchronous:
printf("Passive Parallel Synchronous (PPS)\n");
break;
case passive_parallel_asynchronous:
printf("Passive Parallel Asynchronous (PPA)\n");
break;
case passive_serial_asynchronous:
printf("Passive Serial Asynchronous (PSA)\n");
break;
case altera_jtag_mode: /* Not used */
printf("JTAG Mode\n");
break;
case fast_passive_parallel:
printf("Fast Passive Parallel (FPP)\n");
break;
case fast_passive_parallel_security:
printf("Fast Passive Parallel with Security (FPPS)\n");
break;
/* Add new interface types here */
default:
printf("Unsupported interface type, %d\n", desc->iface);
}
printf("Device Size: \t%zd bytes\n"
"Cookie: \t0x%x (%d)\n",
desc->size, desc->cookie, desc->cookie);
if (desc->iface_fns) {
printf("Device Function Table @ 0x%p\n", desc->iface_fns);
if (fpga->info)
fpga->info(desc);
} else {
printf ("%s: NULL descriptor!\n", fn);
printf("No Device Function Table.\n");
}
return ret_val;
return FPGA_SUCCESS;
}
/* ------------------------------------------------------------------------- */
drivers/fpga/socfpga.c 0 → 100644
浏览文件 @ 04de09f8
/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
* All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/fpga_manager.h>
#include <asm/arch/reset_manager.h>
#include <asm/arch/system_manager.h>
DECLARE_GLOBAL_DATA_PTR;
/* Timeout count */
#define FPGA_TIMEOUT_CNT 0x1000000
static struct socfpga_fpga_manager *fpgamgr_regs =
(struct socfpga_fpga_manager *)SOCFPGA_FPGAMGRREGS_ADDRESS;
static struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
/* Set CD ratio */
static void fpgamgr_set_cd_ratio(unsigned long ratio)
{
clrsetbits_le32(&fpgamgr_regs->ctrl,
0x3 << FPGAMGRREGS_CTRL_CDRATIO_LSB,
(ratio & 0x3) << FPGAMGRREGS_CTRL_CDRATIO_LSB);
}
static int fpgamgr_dclkcnt_set(unsigned long cnt)
{
unsigned long i;
/* Clear any existing done status */
if (readl(&fpgamgr_regs->dclkstat))
writel(0x1, &fpgamgr_regs->dclkstat);
/* Write the dclkcnt */
writel(cnt, &fpgamgr_regs->dclkcnt);
/* Wait till the dclkcnt done */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (!readl(&fpgamgr_regs->dclkstat))
continue;
writel(0x1, &fpgamgr_regs->dclkstat);
return 0;
}
return -ETIMEDOUT;
}
/* Start the FPGA programming by initialize the FPGA Manager */
static int fpgamgr_program_init(void)
{
unsigned long msel, i;
/* Get the MSEL value */
msel = readl(&fpgamgr_regs->stat);
msel &= FPGAMGRREGS_STAT_MSEL_MASK;
msel >>= FPGAMGRREGS_STAT_MSEL_LSB;
/*
* Set the cfg width
* If MSEL[3] = 1, cfg width = 32 bit
*/
if (msel & 0x8) {
setbits_le32(&fpgamgr_regs->ctrl,
FPGAMGRREGS_CTRL_CFGWDTH_MASK);
/* To determine the CD ratio */
/* MSEL[1:0] = 0, CD Ratio = 1 */
if ((msel & 0x3) == 0x0)
fpgamgr_set_cd_ratio(CDRATIO_x1);
/* MSEL[1:0] = 1, CD Ratio = 4 */
else if ((msel & 0x3) == 0x1)
fpgamgr_set_cd_ratio(CDRATIO_x4);
/* MSEL[1:0] = 2, CD Ratio = 8 */
else if ((msel & 0x3) == 0x2)
fpgamgr_set_cd_ratio(CDRATIO_x8);
} else { /* MSEL[3] = 0 */
clrbits_le32(&fpgamgr_regs->ctrl,
FPGAMGRREGS_CTRL_CFGWDTH_MASK);
/* To determine the CD ratio */
/* MSEL[1:0] = 0, CD Ratio = 1 */
if ((msel & 0x3) == 0x0)
fpgamgr_set_cd_ratio(CDRATIO_x1);
/* MSEL[1:0] = 1, CD Ratio = 2 */
else if ((msel & 0x3) == 0x1)
fpgamgr_set_cd_ratio(CDRATIO_x2);
/* MSEL[1:0] = 2, CD Ratio = 4 */
else if ((msel & 0x3) == 0x2)
fpgamgr_set_cd_ratio(CDRATIO_x4);
}
/* To enable FPGA Manager configuration */
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCE_MASK);
/* To enable FPGA Manager drive over configuration line */
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
/* Put FPGA into reset phase */
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
/* (1) wait until FPGA enter reset phase */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_RESETPHASE)
break;
}
/* If not in reset state, return error */
if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_RESETPHASE) {
puts("FPGA: Could not reset\n");
return -1;
}
/* Release FPGA from reset phase */
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_NCONFIGPULL_MASK);
/* (2) wait until FPGA enter configuration phase */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_CFGPHASE)
break;
}
/* If not in configuration state, return error */
if (fpgamgr_get_mode() != FPGAMGRREGS_MODE_CFGPHASE) {
puts("FPGA: Could not configure\n");
return -2;
}
/* Clear all interrupts in CB Monitor */
writel(0xFFF, &fpgamgr_regs->gpio_porta_eoi);
/* Enable AXI configuration */
setbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
return 0;
}
/* Write the RBF data to FPGA Manager */
static void fpgamgr_program_write(const void *rbf_data, unsigned long rbf_size)
{
uint32_t src = (uint32_t)rbf_data;
uint32_t dst = SOCFPGA_FPGAMGRDATA_ADDRESS;
/* Number of loops for 32-byte long copying. */
uint32_t loops32 = rbf_size / 32;
/* Number of loops for 4-byte long copying + trailing bytes */
uint32_t loops4 = DIV_ROUND_UP(rbf_size % 32, 4);
asm volatile(
"1: ldmia %0!, {r0-r7}\n"
" stmia %1!, {r0-r7}\n"
" sub %1, #32\n"
" subs %2, #1\n"
" bne 1b\n"
"2: ldr %2, [%0], #4\n"
" str %2, [%1]\n"
" subs %3, #1\n"
" bne 2b\n"
: "+r"(src), "+r"(dst), "+r"(loops32), "+r"(loops4) :
: "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "cc");
}
/* Ensure the FPGA entering config done */
static int fpgamgr_program_poll_cd(void)
{
const uint32_t mask = FPGAMGRREGS_MON_GPIO_EXT_PORTA_NS_MASK |
FPGAMGRREGS_MON_GPIO_EXT_PORTA_CD_MASK;
unsigned long reg, i;
/* (3) wait until full config done */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
reg = readl(&fpgamgr_regs->gpio_ext_porta);
/* Config error */
if (!(reg & mask)) {
printf("FPGA: Configuration error.\n");
return -3;
}
/* Config done without error */
if (reg & mask)
break;
}
/* Timeout happened, return error */
if (i == FPGA_TIMEOUT_CNT) {
printf("FPGA: Timeout waiting for program.\n");
return -4;
}
/* Disable AXI configuration */
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_AXICFGEN_MASK);
return 0;
}
/* Ensure the FPGA entering init phase */
static int fpgamgr_program_poll_initphase(void)
{
unsigned long i;
/* Additional clocks for the CB to enter initialization phase */
if (fpgamgr_dclkcnt_set(0x4))
return -5;
/* (4) wait until FPGA enter init phase or user mode */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_INITPHASE)
break;
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
break;
}
/* If not in configuration state, return error */
if (i == FPGA_TIMEOUT_CNT)
return -6;
return 0;
}
/* Ensure the FPGA entering user mode */
static int fpgamgr_program_poll_usermode(void)
{
unsigned long i;
/* Additional clocks for the CB to exit initialization phase */
if (fpgamgr_dclkcnt_set(0x5000))
return -7;
/* (5) wait until FPGA enter user mode */
for (i = 0; i < FPGA_TIMEOUT_CNT; i++) {
if (fpgamgr_get_mode() == FPGAMGRREGS_MODE_USERMODE)
break;
}
/* If not in configuration state, return error */
if (i == FPGA_TIMEOUT_CNT)
return -8;
/* To release FPGA Manager drive over configuration line */
clrbits_le32(&fpgamgr_regs->ctrl, FPGAMGRREGS_CTRL_EN_MASK);
return 0;
}
/*
* FPGA Manager to program the FPGA. This is the interface used by FPGA driver.
* Return 0 for sucess, non-zero for error.
*/
int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
{
unsigned long status;
if ((uint32_t)rbf_data & 0x3) {
puts("FPGA: Unaligned data, realign to 32bit boundary.\n");
return -EINVAL;
}
/* Prior programming the FPGA, all bridges need to be shut off */
/* Disable all signals from hps peripheral controller to fpga */
writel(0, &sysmgr_regs->fpgaintfgrp_module);
/* Disable all signals from FPGA to HPS SDRAM */
#define SDR_CTRLGRP_FPGAPORTRST_ADDRESS 0x5080
writel(0, SOCFPGA_SDR_ADDRESS + SDR_CTRLGRP_FPGAPORTRST_ADDRESS);
/* Disable all axi bridge (hps2fpga, lwhps2fpga & fpga2hps) */
socfpga_bridges_reset(1);
/* Unmap the bridges from NIC-301 */
writel(0x1, SOCFPGA_L3REGS_ADDRESS);
/* Initialize the FPGA Manager */
status = fpgamgr_program_init();
if (status)
return status;
/* Write the RBF data to FPGA Manager */
fpgamgr_program_write(rbf_data, rbf_size);
/* Ensure the FPGA entering config done */
status = fpgamgr_program_poll_cd();
if (status)
return status;
/* Ensure the FPGA entering init phase */
status = fpgamgr_program_poll_initphase();
if (status)
return status;
/* Ensure the FPGA entering user mode */
return fpgamgr_program_poll_usermode();
}
drivers/mmc/dw_mmc.c
浏览文件 @ 04de09f8
......@@ -119,7 +119,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
if (get_timer(start) > timeout) {
printf("Timeout on data busy\n");
printf("%s: Timeout on data busy\n", __func__);
return TIMEOUT;
}
}
......@@ -178,15 +178,23 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
}
if (i == retry) {
printf("dwmci_send_cmd: timeout..\n");
printf("%s: Timeout.\n", __func__);
return TIMEOUT;
}
if (mask & DWMCI_INTMSK_RTO) {
printf("dwmci_send_cmd: Response Timeout..\n");
/*
* Timeout here is not necessarily fatal. (e)MMC cards
* will splat here when they receive CMD55 as they do
* not support this command and that is exactly the way
* to tell them apart from SD cards. Thus, this output
* below shall be debug(). eMMC cards also do not favor
* CMD8, please keep that in mind.
*/
debug("%s: Response Timeout.\n", __func__);
return TIMEOUT;
} else if (mask & DWMCI_INTMSK_RE) {
printf("dwmci_send_cmd: Response Error..\n");
printf("%s: Response Error.\n", __func__);
return -1;
}
......@@ -206,7 +214,7 @@ static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
do {
mask = dwmci_readl(host, DWMCI_RINTSTS);
if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
printf("dwmci_send_cmd: DATA ERROR!\n");
printf("%s: DATA ERROR!\n", __func__);
return -1;
}
} while (!(mask & DWMCI_INTMSK_DTO));
......@@ -243,7 +251,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
else if (host->bus_hz)
sclk = host->bus_hz;
else {
printf("dwmci_setup_bus: Didn't get source clock value..\n");
printf("%s: Didn't get source clock value.\n", __func__);
return -EINVAL;
}
......@@ -262,7 +270,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
do {
status = dwmci_readl(host, DWMCI_CMD);
if (timeout-- < 0) {
printf("dwmci_setup_bus: timeout!\n");
printf("%s: Timeout!\n", __func__);
return -ETIMEDOUT;
}
} while (status & DWMCI_CMD_START);
......@@ -277,7 +285,7 @@ static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
do {
status = dwmci_readl(host, DWMCI_CMD);
if (timeout-- < 0) {
printf("dwmci_setup_bus: timeout!\n");
printf("%s: Timeout!\n", __func__);
return -ETIMEDOUT;
}
} while (status & DWMCI_CMD_START);
......
drivers/mmc/socfpga_dw_mmc.c
浏览文件 @ 04de09f8
......@@ -7,6 +7,7 @@
#include <common.h>
#include <malloc.h>
#include <dwmmc.h>
#include <errno.h>
#include <asm/arch/dwmmc.h>
#include <asm/arch/clock_manager.h>
#include <asm/arch/system_manager.h>
......@@ -44,12 +45,18 @@ static void socfpga_dwmci_clksel(struct dwmci_host *host)
int socfpga_dwmmc_init(u32 regbase, int bus_width, int index)
{
struct dwmci_host *host;
unsigned long clk = cm_get_mmc_controller_clk_hz();
if (clk == 0) {
printf("%s: MMC clock is zero!", __func__);
return -EINVAL;
}
/* calloc for zero init */
host = calloc(sizeof(struct dwmci_host), 1);
host = calloc(1, sizeof(struct dwmci_host));
if (!host) {
printf("dwmci_host calloc fail!\n");
return -1;
printf("%s: calloc() failed!\n", __func__);
return -ENOMEM;
}
host->name = "SOCFPGA DWMMC";
......@@ -58,7 +65,7 @@ int socfpga_dwmmc_init(u32 regbase, int bus_width, int index)
host->clksel = socfpga_dwmci_clksel;
host->dev_index = index;
/* fixed clock divide by 4 which due to the SDMMC wrapper */
host->bus_hz = CONFIG_SOCFPGA_DWMMC_BUS_HZ;
host->bus_hz = clk;
host->fifoth_val = MSIZE(0x2) |
RX_WMARK(CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH / 2 - 1) |
TX_WMARK(CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH / 2);
......
drivers/net/designware.c
浏览文件 @ 04de09f8
......@@ -279,19 +279,21 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length)
struct eth_dma_regs *dma_p = priv->dma_regs_p;
u32 desc_num = priv->tx_currdescnum;
struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num];
uint32_t desc_start = (uint32_t)desc_p;
uint32_t desc_end = desc_start +
roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN);
uint32_t data_start = (uint32_t)desc_p->dmamac_addr;
uint32_t data_end = data_start +
roundup(length, ARCH_DMA_MINALIGN);
/*
* Strictly we only need to invalidate the "txrx_status" field
* for the following check, but on some platforms we cannot
* invalidate only 4 bytes, so roundup to
* ARCH_DMA_MINALIGN. This is safe because the individual
* descriptors in the array are each aligned to
* ARCH_DMA_MINALIGN.
* invalidate only 4 bytes, so we flush the entire descriptor,
* which is 16 bytes in total. This is safe because the
* individual descriptors in the array are each aligned to
* ARCH_DMA_MINALIGN and padded appropriately.
*/
invalidate_dcache_range(
(unsigned long)desc_p,
(unsigned long)desc_p +
roundup(sizeof(desc_p->txrx_status), ARCH_DMA_MINALIGN));
invalidate_dcache_range(desc_start, desc_end);
/* Check if the descriptor is owned by CPU */
if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) {
......@@ -299,11 +301,10 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length)
return -1;
}
memcpy((void *)desc_p->dmamac_addr, packet, length);
memcpy(desc_p->dmamac_addr, packet, length);
/* Flush data to be sent */
flush_dcache_range((unsigned long)desc_p->dmamac_addr,
(unsigned long)desc_p->dmamac_addr + length);
flush_dcache_range(data_start, data_end);
#if defined(CONFIG_DW_ALTDESCRIPTOR)
desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST;
......@@ -321,8 +322,7 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length)
#endif
/* Flush modified buffer descriptor */
flush_dcache_range((unsigned long)desc_p,
(unsigned long)desc_p + sizeof(struct dmamacdescr));
flush_dcache_range(desc_start, desc_end);
/* Test the wrap-around condition. */
if (++desc_num >= CONFIG_TX_DESCR_NUM)
......@@ -342,11 +342,14 @@ static int dw_eth_recv(struct eth_device *dev)
u32 status, desc_num = priv->rx_currdescnum;
struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num];
int length = 0;
uint32_t desc_start = (uint32_t)desc_p;
uint32_t desc_end = desc_start +
roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN);
uint32_t data_start = (uint32_t)desc_p->dmamac_addr;
uint32_t data_end;
/* Invalidate entire buffer descriptor */
invalidate_dcache_range((unsigned long)desc_p,
(unsigned long)desc_p +
sizeof(struct dmamacdescr));
invalidate_dcache_range(desc_start, desc_end);
status = desc_p->txrx_status;
......@@ -357,9 +360,8 @@ static int dw_eth_recv(struct eth_device *dev)
DESC_RXSTS_FRMLENSHFT;
/* Invalidate received data */
invalidate_dcache_range((unsigned long)desc_p->dmamac_addr,
(unsigned long)desc_p->dmamac_addr +
roundup(length, ARCH_DMA_MINALIGN));
data_end = data_start + roundup(length, ARCH_DMA_MINALIGN);
invalidate_dcache_range(data_start, data_end);
NetReceive(desc_p->dmamac_addr, length);
......@@ -370,9 +372,7 @@ static int dw_eth_recv(struct eth_device *dev)
desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA;
/* Flush only status field - others weren't changed */
flush_dcache_range((unsigned long)&desc_p->txrx_status,
(unsigned long)&desc_p->txrx_status +
sizeof(desc_p->txrx_status));
flush_dcache_range(desc_start, desc_end);
/* Test the wrap-around condition. */
if (++desc_num >= CONFIG_RX_DESCR_NUM)
......
drivers/net/phy/micrel.c
浏览文件 @ 04de09f8
......@@ -25,8 +25,7 @@ static struct phy_driver KSZ804_driver = {
#ifndef CONFIG_PHY_MICREL_KSZ9021
/*
* I can't believe Micrel used the exact same part number
* for the KSZ9021
* Shame Micrel, Shame!!!!!
* for the KSZ9021. Shame Micrel, Shame!
*/
static struct phy_driver KS8721_driver = {
.name = "Micrel KS8721BL",
......@@ -40,7 +39,7 @@ static struct phy_driver KS8721_driver = {
#endif
/**
/*
* KSZ9021 - KSZ9031 common
*/
......@@ -69,8 +68,8 @@ static int ksz90xx_startup(struct phy_device *phydev)
phydev->speed = SPEED_10;
return 0;
}
#ifdef CONFIG_PHY_MICREL_KSZ9021
#ifdef CONFIG_PHY_MICREL_KSZ9021
/*
* KSZ9021
*/
......
include/altera.h
浏览文件 @ 04de09f8
......@@ -10,35 +10,59 @@
#ifndef _ALTERA_H_
#define _ALTERA_H_
typedef enum { /* typedef Altera_iface */
min_altera_iface_type, /* insert all new types after this */
passive_serial, /* serial data and external clock */
passive_parallel_synchronous, /* parallel data */
passive_parallel_asynchronous, /* parallel data */
passive_serial_asynchronous, /* serial data w/ internal clock (not used) */
altera_jtag_mode, /* jtag/tap serial (not used ) */
fast_passive_parallel, /* fast passive parallel (FPP) */
fast_passive_parallel_security, /* fast passive parallel with security (FPPS) */
max_altera_iface_type /* insert all new types before this */
} Altera_iface; /* end, typedef Altera_iface */
enum altera_iface {
/* insert all new types after this */
min_altera_iface_type,
/* serial data and external clock */
passive_serial,
/* parallel data */
passive_parallel_synchronous,
/* parallel data */
passive_parallel_asynchronous,
/* serial data w/ internal clock (not used) */
passive_serial_asynchronous,
/* jtag/tap serial (not used ) */
altera_jtag_mode,
/* fast passive parallel (FPP) */
fast_passive_parallel,
/* fast passive parallel with security (FPPS) */
fast_passive_parallel_security,
/* insert all new types before this */
max_altera_iface_type,
};
typedef enum { /* typedef Altera_Family */
min_altera_type, /* insert all new types after this */
Altera_ACEX1K, /* ACEX1K Family */
Altera_CYC2, /* CYCLONII Family */
Altera_StratixII, /* StratixII Family */
/* Add new models here */
max_altera_type /* insert all new types before this */
} Altera_Family; /* end, typedef Altera_Family */
enum altera_family {
/* insert all new types after this */
min_altera_type,
/* ACEX1K Family */
Altera_ACEX1K,
/* CYCLONII Family */
Altera_CYC2,
/* StratixII Family */
Altera_StratixII,
/* SoCFPGA Family */
Altera_SoCFPGA,
typedef struct { /* typedef Altera_desc */
Altera_Family family; /* part type */
Altera_iface iface; /* interface type */
size_t size; /* bytes of data part can accept */
void * iface_fns;/* interface function table */
void * base; /* base interface address */
int cookie; /* implementation specific cookie */
} Altera_desc; /* end, typedef Altera_desc */
/* Add new models here */
/* insert all new types before this */
max_altera_type,
};
typedef struct {
/* part type */
enum altera_family family;
/* interface type */
enum altera_iface iface;
/* bytes of data part can accept */
size_t size;
/* interface function table */
void *iface_fns;
/* base interface address */
void *base;
/* implementation specific cookie */
int cookie;
} Altera_desc;
/* Generic Altera Functions
*********************************************************************/
......@@ -69,4 +93,8 @@ typedef struct {
Altera_post_fn post;
} altera_board_specific_func;
#ifdef CONFIG_FPGA_SOCFPGA
int socfpga_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size);
#endif
#endif /* _ALTERA_H_ */
include/configs/axs101.h
浏览文件 @ 04de09f8
......@@ -125,7 +125,6 @@
*/
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_DW_AUTONEG
#define CONFIG_DW_SEARCH_PHY
#define CONFIG_NET_MULTI
/*
......
include/configs/socfpga_common.h 0 → 100644
浏览文件 @ 04de09f8
/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
#define __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__
#define CONFIG_SYS_GENERIC_BOARD
/* Virtual target or real hardware */
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_ARMV7
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SOCFPGA
/*
* High level configuration
*/
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_SYS_NO_FLASH
#define CONFIG_CLOCKS
#define CONFIG_FIT
#define CONFIG_OF_LIBFDT
#define CONFIG_SYS_BOOTMAPSZ (64 * 1024 * 1024)
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Memory configurations
*/
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x0
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
#define CONFIG_SYS_INIT_RAM_SIZE (0x10000 - 0x100)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TEXT_BASE 0x08000040
#else
#define CONFIG_SYS_TEXT_BASE 0x01000040
#endif
/*
* U-Boot general configurations
*/
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
/* Print buffer size */
#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Boot argument buffer size */
#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
#define CONFIG_AUTO_COMPLETE /* Command auto complete */
#define CONFIG_CMDLINE_EDITING /* Command history etc */
#define CONFIG_SYS_HUSH_PARSER
/*
* Cache
*/
#define CONFIG_SYS_ARM_CACHE_WRITEALLOC
#define CONFIG_SYS_CACHELINE_SIZE 32
#define CONFIG_SYS_L2_PL310
#define CONFIG_SYS_PL310_BASE SOCFPGA_MPUL2_ADDRESS
/*
* Ethernet on SoC (EMAC)
*/
#if defined(CONFIG_CMD_NET) && !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET)
#define CONFIG_DESIGNWARE_ETH
#define CONFIG_NET_MULTI
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_MII
#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
#define CONFIG_PHYLIB
#define CONFIG_PHY_GIGE
#endif
/*
* FPGA Driver
*/
#ifdef CONFIG_CMD_FPGA
#define CONFIG_FPGA
#define CONFIG_FPGA_ALTERA
#define CONFIG_FPGA_SOCFPGA
#define CONFIG_FPGA_COUNT 1
#endif
/*
* L4 OSC1 Timer 0
*/
/* This timer uses eosc1, whose clock frequency is fixed at any condition. */
#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TIMER_RATE 2400000
#else
#define CONFIG_SYS_TIMER_RATE 25000000
#endif
/*
* L4 Watchdog
*/
#ifdef CONFIG_HW_WATCHDOG
#define CONFIG_DESIGNWARE_WATCHDOG
#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
#define CONFIG_DW_WDT_CLOCK_KHZ 25000
#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 12000
#endif
/*
* MMC Driver
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_GENERIC_MMC
#define CONFIG_DWMMC
#define CONFIG_SOCFPGA_DWMMC
#define CONFIG_SOCFPGA_DWMMC_FIFO_DEPTH 1024
#define CONFIG_SOCFPGA_DWMMC_DRVSEL 3
#define CONFIG_SOCFPGA_DWMMC_SMPSEL 0
/* FIXME */
/* using smaller max blk cnt to avoid flooding the limited stack we have */
#define CONFIG_SYS_MMC_MAX_BLK_COUNT 256 /* FIXME -- SPL only? */
#endif
/*
* Serial Driver
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_COM1 SOCFPGA_UART0_ADDRESS
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_NS16550_CLK 1000000
#else
#define CONFIG_SYS_NS16550_CLK 100000000
#endif
#define CONFIG_CONS_INDEX 1
#define CONFIG_BAUDRATE 115200
/*
* U-Boot environment
*/
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE 4096
/*
* SPL
*/
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_TEXT_BASE 0xFFFF0000
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_STACK_SIZE (4 * 1024)
#define CONFIG_SPL_MALLOC_SIZE (5 * 1024) /* FIXME */
#define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start))
#define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start)
#define CHUNKSZ_CRC32 (1 * 1024) /* FIXME: ewww */
#define CONFIG_CRC32_VERIFY
/* Linker script for SPL */
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds"
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_LIBGENERIC_SUPPORT
#define CONFIG_SPL_WATCHDOG_SUPPORT
#define CONFIG_SPL_SERIAL_SUPPORT
#ifdef CONFIG_SPL_BUILD
#undef CONFIG_PARTITIONS
#endif
#endif /* __CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ */
include/configs/socfpga_cyclone5.h
浏览文件 @ 04de09f8
/*
* Copyright (C) 2012 Altera Corporation <www.altera.com>
* Copyright (C) 2014 Marek Vasut <marex@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#ifndef __CONFIG_SOCFPGA_CYCLONE5_H__
#define __CONFIG_SOCFPGA_CYCLONE5_H__
#include <asm/arch/socfpga_base_addrs.h>
#include "../../board/altera/socfpga/pinmux_config.h"
#include "../../board/altera/socfpga/iocsr_config.h"
#include "../../board/altera/socfpga/pll_config.h"
/*
* High level configuration
*/
/* Virtual target or real hardware */
#undef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_ARMV7
#define CONFIG_SYS_DCACHE_OFF
#undef CONFIG_USE_IRQ
#define CONFIG_MISC_INIT_R
#define CONFIG_SINGLE_BOOTLOADER
#define CONFIG_SOCFPGA
/* base address for .text section */
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TEXT_BASE 0x08000040
#else
#define CONFIG_SYS_TEXT_BASE 0x01000040
#endif
#define CONFIG_SYS_LOAD_ADDR 0x7fc0
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 256
/* Monitor Command Prompt */
#define CONFIG_SYS_PROMPT "SOCFPGA_CYCLONE5 # "
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
/*
* Display CPU and Board Info
*/
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/*
* Enable early stage initialization at C environment
*/
#define CONFIG_BOARD_EARLY_INIT_F
/* flat device tree */
#define CONFIG_OF_LIBFDT
/* skip updating the FDT blob */
#define CONFIG_FDT_BLOB_SKIP_UPDATE
/* Initial Memory map size for Linux, minus 4k alignment for DFT blob */
#define CONFIG_SYS_BOOTMAPSZ ((256*1024*1024) - (4*1024))
#define CONFIG_SPL_RAM_DEVICE
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start))
#define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start)
/*
* Memory allocation (MALLOC)
*/
/* Room required on the stack for the environment data */
#define CONFIG_ENV_SIZE 1024
/* Size of DRAM reserved for malloc() use */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
/* SP location before relocation, must use scratch RAM */
#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
/* Reserving 0x100 space at back of scratch RAM for debug info */
#define CONFIG_SYS_INIT_RAM_SIZE (0x10000 - 0x100)
/* Stack pointer prior relocation, must situated at on-chip RAM */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
/*
* Command line configuration.
*/
/* U-Boot Commands */
#define CONFIG_SYS_NO_FLASH
#include <config_cmd_default.h>
/* FAT file system support */
#define CONFIG_DOS_PARTITION
#define CONFIG_FAT_WRITE
#define CONFIG_HW_WATCHDOG
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FPGA
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_MII
#define CONFIG_CMD_MMC
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
#define CONFIG_CMD_SETEXPR
#define CONFIG_REGEX /* Enable regular expression support */
/*
* Misc
*/
#define CONFIG_DOS_PARTITION 1
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */
#ifdef CONFIG_SPL_BUILD
#undef CONFIG_PARTITIONS
/* Booting Linux */
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "zImage"
#define CONFIG_BOOTARGS "console=ttyS0" __stringify(CONFIG_BAUDRATE)
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_BOOTCOMMAND "run ramboot"
#else
#define CONFIG_BOOTCOMMAND "run mmcload; run mmcboot"
#endif
#define CONFIG_LOADADDR 0x8000
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
/*
* Environment setup
*/
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
#define CONFIG_EMAC_BASE SOCFPGA_EMAC0_ADDRESS
#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
#define CONFIG_EPHY0_PHY_ADDR 0
/* Delay before automatically booting the default image */
#define CONFIG_BOOTDELAY 3
/* Enable auto completion of commands using TAB */
#define CONFIG_AUTO_COMPLETE
/* use "hush" command parser */
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_CMD_RUN
/* PHY */
#define CONFIG_EPHY1_PHY_ADDR 4
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
#define CONFIG_KSZ9021_CLK_SKEW_ENV "micrel-ksz9021-clk-skew"
#define CONFIG_KSZ9021_CLK_SKEW_VAL 0xf0f0
#define CONFIG_KSZ9021_DATA_SKEW_ENV "micrel-ksz9021-data-skew"
#define CONFIG_KSZ9021_DATA_SKEW_VAL 0x0
#define CONFIG_BOOTCOMMAND "run ramboot"
#endif
/*
* arguments passed to the bootm command. The value of
* CONFIG_BOOTARGS goes into the environment value "bootargs".
* Do note the value will overide also the chosen node in FDT blob.
*/
#define CONFIG_BOOTARGS "console=ttyS0,57600,mem=256M@0x0"
/* Extra Environment */
#define CONFIG_HOSTNAME socfpga_cyclone5
#define CONFIG_EXTRA_ENV_SETTINGS \
"verify=n\0" \
"loadaddr= " __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
"bootm ${loadaddr} - ${fdt_addr}\0" \
"bootimage=uImage\0" \
"bootimage=zImage\0" \
"fdt_addr=100\0" \
"fsloadcmd=ext2load\0" \
"bootm ${loadaddr} - ${fdt_addr}\0" \
"fdtimage=socfpga.dtb\0" \
"fsloadcmd=ext2load\0" \
"bootm ${loadaddr} - ${fdt_addr}\0" \
"mmcroot=/dev/mmcblk0p2\0" \
"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
" root=${mmcroot} rw rootwait;" \
"bootz ${loadaddr} - ${fdt_addr}\0" \
"mmcload=mmc rescan;" \
"load mmc 0:1 ${loadaddr} ${bootimage};" \
"load mmc 0:1 ${fdt_addr} ${fdtimage}\0" \
"qspiroot=/dev/mtdblock0\0" \
"qspirootfstype=jffs2\0" \
"qspiboot=setenv bootargs " CONFIG_BOOTARGS \
" root=${qspiroot} rw rootfstype=${qspirootfstype};"\
"bootm ${loadaddr} - ${fdt_addr}\0"
/* using environment setting for stdin, stdout, stderr */
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* Enable the call to overwrite_console() */
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
/* Enable overwrite of previous console environment settings */
#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
/* max number of command args */
#define CONFIG_SYS_MAXARGS 16
/*
* Hardware drivers
*/
/*
* SDRAM Memory Map
*/
/* We have 1 bank of DRAM */
#define CONFIG_NR_DRAM_BANKS 1
/* SDRAM Bank #1 */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* SDRAM memory size */
#define PHYS_SDRAM_1_SIZE 0x40000000
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_START 0x00000000
#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
/*
* NS16550 Configuration
*/
#define UART0_BASE SOCFPGA_UART0_ADDRESS
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
#define CONFIG_CONS_INDEX 1
#define CONFIG_SYS_NS16550_COM1 UART0_BASE
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define V_NS16550_CLK 1000000
#else
#define V_NS16550_CLK 100000000
#endif
#define CONFIG_BAUDRATE 115200
/*
* FLASH
*/
#define CONFIG_SYS_NO_FLASH
/*
* L4 OSC1 Timer 0
*/
/* This timer use eosc1 where the clock frequency is fixed
* throughout any condition */
#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
/* reload value when timer count to zero */
#define TIMER_LOAD_VAL 0xFFFFFFFF
/* Timer info */
#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_SYS_TIMER_RATE 2400000
#else
#define CONFIG_SYS_TIMER_RATE 25000000
#endif
#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
#define CONFIG_ENV_IS_NOWHERE
/*
* network support
*/
#ifndef CONFIG_SOCFPGA_VIRTUAL_TARGET
#define CONFIG_DESIGNWARE_ETH 1
#endif
#ifdef CONFIG_DESIGNWARE_ETH
#define CONFIG_EMAC0_BASE SOCFPGA_EMAC0_ADDRESS
#define CONFIG_EMAC1_BASE SOCFPGA_EMAC1_ADDRESS
/* console support for network */
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_CMD_PING
/* designware */
#define CONFIG_NET_MULTI
#define CONFIG_DW_ALTDESCRIPTOR
#define CONFIG_DW_SEARCH_PHY
#define CONFIG_MII
#define CONFIG_PHY_GIGE
#define CONFIG_DW_AUTONEG
#define CONFIG_AUTONEG_TIMEOUT (15 * CONFIG_SYS_HZ)
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021
/* EMAC controller and PHY used */
#define CONFIG_EMAC_BASE CONFIG_EMAC1_BASE
#define CONFIG_EPHY_PHY_ADDR CONFIG_EPHY1_PHY_ADDR
#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
#endif /* CONFIG_DESIGNWARE_ETH */
/*
* L4 Watchdog
*/
#define CONFIG_HW_WATCHDOG
#define CONFIG_HW_WATCHDOG_TIMEOUT_MS 2000
#define CONFIG_DESIGNWARE_WATCHDOG
#define CONFIG_DW_WDT_BASE SOCFPGA_L4WD0_ADDRESS
/* Clocks source frequency to watchdog timer */
#define CONFIG_DW_WDT_CLOCK_KHZ 25000
/*
* SPL "Second Program Loader" aka Initial Software
*/
/* Enable building of SPL globally */
#define CONFIG_SPL_FRAMEWORK
/* TEXT_BASE for linking the SPL binary */
#define CONFIG_SPL_TEXT_BASE 0xFFFF0000
/* Stack size for SPL */
#define CONFIG_SPL_STACK_SIZE (4 * 1024)
/* MALLOC size for SPL */
#define CONFIG_SPL_MALLOC_SIZE (5 * 1024)
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_BOARD_INIT
#define CHUNKSZ_CRC32 (1 * 1024)
#define CONFIG_CRC32_VERIFY
/* Linker script for SPL */
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds"
/* Support for common/libcommon.o in SPL binary */
#define CONFIG_SPL_LIBCOMMON_SUPPORT
/* Support for lib/libgeneric.o in SPL binary */
#define CONFIG_SPL_LIBGENERIC_SUPPORT
/* Support for watchdog */
#define CONFIG_SPL_WATCHDOG_SUPPORT
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
#endif /* __CONFIG_H */
#endif /* __CONFIG_SOCFPGA_CYCLONE5_H__ */
include/dwmmc.h
浏览文件 @ 04de09f8
......@@ -157,7 +157,7 @@ struct dwmci_idmac {
u32 cnt;
u32 addr;
u32 next_addr;
};
} __aligned(ARCH_DMA_MINALIGN);
static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val)
{
......
include/image.h
浏览文件 @ 04de09f8
......@@ -232,6 +232,7 @@ struct lmb;
#define IH_TYPE_MXSIMAGE 16 /* Freescale MXSBoot Image */
#define IH_TYPE_GPIMAGE 17 /* TI Keystone GPHeader Image */
#define IH_TYPE_ATMELIMAGE 18 /* ATMEL ROM bootable Image */
#define IH_TYPE_SOCFPGAIMAGE 19 /* Altera SOCFPGA Preloader */
/*
* Compression Types
......
tools/Makefile
浏览文件 @ 04de09f8
......@@ -87,6 +87,7 @@ dumpimage-mkimage-objs := aisimage.o \
os_support.o \
pblimage.o \
pbl_crc32.o \
socfpgaimage.o \
lib/sha1.o \
lib/sha256.o \
ublimage.o \
......
tools/imagetool.c
浏览文件 @ 04de09f8
......@@ -47,6 +47,8 @@ void register_image_tool(imagetool_register_t image_register)
init_ubl_image_type();
/* Init Davinci AIS support */
init_ais_image_type();
/* Init Altera SOCFPGA support */
init_socfpga_image_type();
/* Init TI Keystone boot image generation/list support */
init_gpimage_type();
}
......
tools/imagetool.h
浏览文件 @ 04de09f8
......@@ -168,6 +168,7 @@ void init_mxs_image_type(void);
void init_fit_image_type(void);
void init_ubl_image_type(void);
void init_omap_image_type(void);
void init_socfpga_image_type(void);
void init_gpimage_type(void);
void pbl_load_uboot(int fd, struct image_tool_params *mparams);
......
tools/socfpgaimage.c 0 → 100644
浏览文件 @ 04de09f8
/*
* Copyright (C) 2014 Charles Manning <cdhmanning@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*
* Reference doc http://www.altera.com.cn/literature/hb/cyclone-v/cv_5400A.pdf
* Note this doc is not entirely accurate. Of particular interest to us is the
* "header" length field being in U32s and not bytes.
*
* "Header" is a structure of the following format.
* this is positioned at 0x40.
*
* Endian is LSB.
*
* Offset Length Usage
* -----------------------
* 0x40 4 Validation word 0x31305341
* 0x44 1 Version (whatever, zero is fine)
* 0x45 1 Flags (unused, zero is fine)
* 0x46 2 Length (in units of u32, including the end checksum).
* 0x48 2 Zero
* 0x4A 2 Checksum over the header. NB Not CRC32
*
* At the end of the code we have a 32-bit CRC checksum over whole binary
* excluding the CRC.
*
* Note that the CRC used here is **not** the zlib/Adler crc32. It is the
* CRC-32 used in bzip2, ethernet and elsewhere.
*
* The image is padded out to 64k, because that is what is
* typically used to write the image to the boot medium.
*/
#include "pbl_crc32.h"
#include "imagetool.h"
#include <image.h>
#define HEADER_OFFSET 0x40
#define VALIDATION_WORD 0x31305341
#define PADDED_SIZE 0x10000
/* To allow for adding CRC, the max input size is a bit smaller. */
#define MAX_INPUT_SIZE (PADDED_SIZE - sizeof(uint32_t))
static uint8_t buffer[PADDED_SIZE];
static struct socfpga_header {
uint32_t validation;
uint8_t version;
uint8_t flags;
uint16_t length_u32;
uint16_t zero;
uint16_t checksum;
} header;
/*
* The header checksum is just a very simple checksum over
* the header area.
* There is still a crc32 over the whole lot.
*/
static uint16_t hdr_checksum(struct socfpga_header *header)
{
int len = sizeof(*header) - sizeof(header->checksum);
uint8_t *buf = (uint8_t *)header;
uint16_t ret = 0;
while (--len)
ret += *buf++;
return ret;
}
static void build_header(uint8_t *buf, uint8_t version, uint8_t flags,
uint16_t length_bytes)
{
header.validation = htole32(VALIDATION_WORD);
header.version = version;
header.flags = flags;
header.length_u32 = htole16(length_bytes/4);
header.zero = 0;
header.checksum = htole16(hdr_checksum(&header));
memcpy(buf, &header, sizeof(header));
}
/*
* Perform a rudimentary verification of header and return
* size of image.
*/
static int verify_header(const uint8_t *buf)
{
memcpy(&header, buf, sizeof(header));
if (le32toh(header.validation) != VALIDATION_WORD)
return -1;
if (le16toh(header.checksum) != hdr_checksum(&header))
return -1;
return le16toh(header.length_u32) * 4;
}
/* Sign the buffer and return the signed buffer size */
static int sign_buffer(uint8_t *buf,
uint8_t version, uint8_t flags,
int len, int pad_64k)
{
uint32_t calc_crc;
/* Align the length up */
len = (len + 3) & (~3);
/* Build header, adding 4 bytes to length to hold the CRC32. */
build_header(buf + HEADER_OFFSET, version, flags, len + 4);
/* Calculate and apply the CRC */
calc_crc = ~pbl_crc32(0, (char *)buf, len);
*((uint32_t *)(buf + len)) = htole32(calc_crc);
if (!pad_64k)
return len + 4;
return PADDED_SIZE;
}
/* Verify that the buffer looks sane */
static int verify_buffer(const uint8_t *buf)
{
int len; /* Including 32bit CRC */
uint32_t calc_crc;
uint32_t buf_crc;
len = verify_header(buf + HEADER_OFFSET);
if (len < 0) {
fprintf(stderr, "Invalid header\n");
return -1;
}
if (len < HEADER_OFFSET || len > PADDED_SIZE) {
fprintf(stderr, "Invalid header length (%i)\n", len);
return -1;
}
/*
* Adjust length to the base of the CRC.
* Check the CRC.
*/
len -= 4;
calc_crc = ~pbl_crc32(0, (const char *)buf, len);
buf_crc = le32toh(*((uint32_t *)(buf + len)));
if (buf_crc != calc_crc) {
fprintf(stderr, "CRC32 does not match (%08x != %08x)\n",
buf_crc, calc_crc);
return -1;
}
return 0;
}
/* mkimage glue functions */
static int socfpgaimage_verify_header(unsigned char *ptr, int image_size,
struct image_tool_params *params)
{
if (image_size != PADDED_SIZE)
return -1;
return verify_buffer(ptr);
}
static void socfpgaimage_print_header(const void *ptr)
{
if (verify_buffer(ptr) == 0)
printf("Looks like a sane SOCFPGA preloader\n");
else
printf("Not a sane SOCFPGA preloader\n");
}
static int socfpgaimage_check_params(struct image_tool_params *params)
{
/* Not sure if we should be accepting fflags */
return (params->dflag && (params->fflag || params->lflag)) ||
(params->fflag && (params->dflag || params->lflag)) ||
(params->lflag && (params->dflag || params->fflag));
}
static int socfpgaimage_check_image_types(uint8_t type)
{
if (type == IH_TYPE_SOCFPGAIMAGE)
return EXIT_SUCCESS;
return EXIT_FAILURE;
}
/*
* To work in with the mkimage framework, we do some ugly stuff...
*
* First, socfpgaimage_vrec_header() is called.
* We prepend a fake header big enough to make the file PADDED_SIZE.
* This gives us enough space to do what we want later.
*
* Next, socfpgaimage_set_header() is called.
* We fix up the buffer by moving the image to the start of the buffer.
* We now have some room to do what we need (add CRC and padding).
*/
static int data_size;
#define FAKE_HEADER_SIZE (PADDED_SIZE - data_size)
static int socfpgaimage_vrec_header(struct image_tool_params *params,
struct image_type_params *tparams)
{
struct stat sbuf;
if (params->datafile &&
stat(params->datafile, &sbuf) == 0 &&
sbuf.st_size <= MAX_INPUT_SIZE) {
data_size = sbuf.st_size;
tparams->header_size = FAKE_HEADER_SIZE;
}
return 0;
}
static void socfpgaimage_set_header(void *ptr, struct stat *sbuf, int ifd,
struct image_tool_params *params)
{
uint8_t *buf = (uint8_t *)ptr;
/*
* This function is called after vrec_header() has been called.
* At this stage we have the FAKE_HEADER_SIZE dummy bytes followed by
* data_size image bytes. Total = PADDED_SIZE.
* We need to fix the buffer by moving the image bytes back to
* the beginning of the buffer, then actually do the signing stuff...
*/
memmove(buf, buf + FAKE_HEADER_SIZE, data_size);
memset(buf + data_size, 0, FAKE_HEADER_SIZE);
sign_buffer(buf, 0, 0, data_size, 0);
}
static struct image_type_params socfpgaimage_params = {
.name = "Altera SOCFPGA preloader support",
.vrec_header = socfpgaimage_vrec_header,
.header_size = 0, /* This will be modified by vrec_header() */
.hdr = (void *)buffer,
.check_image_type = socfpgaimage_check_image_types,
.verify_header = socfpgaimage_verify_header,
.print_header = socfpgaimage_print_header,
.set_header = socfpgaimage_set_header,
.check_params = socfpgaimage_check_params,
};
void init_socfpga_image_type(void)
{
register_image_type(&socfpgaimage_params);
}
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或