Trivial fix.
Signed-off-by: NMichal Simek <michal.simek@xilinx.com>

This commit was generated by the following command:

    scripts/fill_scrapyard.py

The commit-ID of CPCIISER4 removal has been fixed by hand because
the board was removed by commit 37057260 (ppc4xx: remove CPCIISER4
board), but it was added to README.scrapyard by commit 9a4018e0
(ppc4xx: remove DP405 board).
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

In some extreme cases it may be necessary to wait 1.5 seconds or more for a hpd
signal to show up (and be able to read edid info), but we do not want to
penalize all headless boots with an extra second boot delay, so add a hpd_delay
parameter which can be set through the video-mode env. variable.

While at it raise the default from 300ms to 500ms as 300 may very well be too
low in many cases.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>

If a board has no LCD, but does have VGA fallback to VGA when no HDMI cable
is connected (unless hpd=0).
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>

Add lcd output support, see the new Kconfig entries and doc/README.video for
how to enable / configure this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NIan Campbell <ijc@hellion.org.uk>

Update README.x86 to include new build instructions for U-Boot as
the coreboot payload and testing considerations with coreboot.
Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
Acked-by: NSimon Glass <sjg@chromium.org>

It is useful to be able to see the MTRR setup in U-Boot. Add a command
to list the state of the variable MTRR registers and allow them to be
changed.

Update the documentation to list some of the available commands.

This does not support fixed MTRRs as yet.
Signed-off-by: NSimon Glass <sjg@chromium.org>
Tested-by: NBin Meng <bmeng.cn@gmail.com>

only keep CPCI4052
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>

Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: NStefan Roese <sr@denx.de>

Signed-off-by: NLuka Perkov <luka.perkov@sartura.hr>
CC: Prafulla Wadaskar <prafulla@marvell.com>
CC: Wolfgang Denk <wd@denx.de>
Acked-by: NStefan Roese <sr@denx.de>

Signed-off-by: NLuka Perkov <luka.perkov@sartura.hr>

The ChromeOS EC keyboard is used by various different chromebooks. Peach
pi being the third board in the u-boot tree to use it (snow and peach
pit the other two). Rather then embedding the same big DT node in the
peach-pi DT again, copy the dtsi snippit & bindings documentation from
linux and include it in all 3 boards.

This slightly changes the dt bindings in u-boot:
  * google,key-rows becomes keypad,num-rows
  * google,key-colums becomes keypad,num-colums
  * google,repeat-delay-ms and google,repeat-rate-ms are no longer used
    and replaced by hardcoded values (similar to tegra kbc)
Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
Acked-by: NSimon Glass <sjg@chromium.org>
Tested-by: NSimon Glass <sjg@chromium.org>

To enjoy driver-model on sandbox, using device tree is recommended.
While we are here, change sandbox_config to sandbox_defconfig too.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: NSimon Glass <sjg@chromium.org>
Acked-by: NJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>

All the MPC824X boards are still non-generic boards:
A3000, CPC45, CU824, eXalion, MVBLUE, MUSENKI, Sandpoint824x, utx8245
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Josef Wagner <Wagner@Microsys.de>
Cc: Torsten Demke <torsten.demke@fci.com>
Cc: Jim Thompson <jim@musenki.com>
Cc: Greg Allen <gallen@arlut.utexas.edu>

These boards are still non-generic boards.

drivers/rtc/ds12887.c should also be removed because it can not
be built without CONFIG_ATC.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

These boards are still non-generic boards.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

This board is still a non-generic board.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

This board is still a non-generic board.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Oliver Brown <obrown@adventnetworks.com>

This board is still a non-generic board.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Grandegger <wg@denx.de>

This board is still a non-generic board.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Heiko Schocher <hs@denx.de>

These boards are still non-generic boards.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Wolfgang Denk <wd@denx.de>

This board is still a non-generic board.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Rune Torgersen <runet@innovsys.com>

This board is still a non-generic board.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>

This board is still a non-generic board.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Frank Panno <fpanno@delphintech.com>

This board is still a non-generic board.
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Brad Kemp <Brad.Kemp@seranoa.com>