- 15 1月, 2015 22 次提交
-
-
由 Michal Simek 提交于
Trivial fix. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Alexey Brodkin 提交于
It makes sense to specify CONFIG_SYS_CLK_FREQ in "configs/xx_defconfig" instead of "include/configs/xxx.h" because then header will be reusable across boards with different CPU clocks. Also this nice to have an ability for end user to tune this value himself via "menuconfig". For now I'm only applying this change to all ARC configs because otherwise scope of change will be huge. Signed-off-by: NAlexey Brodkin <abrodkin@synopsys.com> Cc: Tom Rini <trini@ti.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Hans de Goede <hdegoede@redhat.com> cc: Simon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@ti.com>
-
由 Masahiro Yamada 提交于
If CONFIG_SPL_NOR_SUPPORT is defined, spl_nor_load_image() requires spl_start_uboot(), CONFIG_SYS_OS_BASE, CONFIG_SYS_SPL_ARGS_ADDR, CONFIG_SYS_FDT_BASE to be defined even if users just want to run U-Boot, not Linux. This is inconvenient. This patch is following the codying style of common/spl/spl_nand.c. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Marek Vasut 提交于
Allow booting the OpenRTOS payloads via fitImage image type. Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Marek Vasut 提交于
Add separate image type for the Wittenstein OpenRTOS . Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Tom Rini <trini@ti.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Evgeni Dobrev 提交于
Add support for Seagate BlackArmor NAS220 Signed-off-by: NEvgeni Dobrev <evgeni@studio-punkt.com>
-
由 Bill Pringlemeir 提交于
Some MTD defines are repeated twice; once with UBI and then with MTD. Remove the duplicate MTD defines from the UBI grouping. Signed-off-by: NBill Pringlemeir <bpringlemeir@nbsps.com>
-
由 Simon Glass 提交于
This allows the caller to easily detect how much of the destination buffer has been used. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This allows the caller to easily detect how much of the destination buffer has been used. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This allows the caller to easily detect how much of the destination buffer has been used. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Adjust the code so that the error reporting can all be done at the end, and is the same for each decompression method. Try to detect when decompression fails due to lack of space. Keep the behaviour of resetting on failure even though there should be no memory corruption now. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Refactor to allow this function to be used to announce the image being loaded regardless of compression type and even when there is no decompression. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Use each compression method (including uncompressed). Test for normal operation, insufficient space and corrupted data. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Try to keep the names of the unit test commands consistent. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Export this function for testing. Also add a parameter so that values other than CONFIG_SYS_BOOTM_LEN can be used for the maximum uncompressed size. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Sometimes it is useful to see the output from U-Boot, so add an option to make this easier. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Prior to commit d455d878 there was an inconsistency between the position of the 'address' parameter in 'sb load' and 'sb save'. This was corrected but it broke some tests. Fix the tests and also the help for 'sb save'. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
This code is repeated in several places, and does not detect a common fault where the image is too large. Move it into its own function and provide a more helpful messages in this case, for compression schemes which support this. Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Simon Glass 提交于
Commit 4d3b8a0d fixed a problem with lzma decompress where it would run out of bytes to decompress. The algorithm needs to know how many uncompressed bytes it is expected to produce. However, the fix introduced a potential buffer overrun, and causes the compression test to fail (test_compression command in sandbox). The correct fix seems to be to use the minimum of the expected number of uncompressed bytes and the amount of output space available. That way things work normally when there is enough space, and return an error (without overrunning available space) when there is not. Signed-off-by: NAntonios Vamporakis <ant@area128.com> CC: Kees Cook <keescook@chromium.org> CC: Simon Glass <sjg@chromium.org> CC: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> CC: Luka Perkov <luka@openwrt.org> Signed-off-by: NSimon Glass <sjg@chromium.org>
-
由 Wolfgang Denk 提交于
Prepare code to make later modifications checkpatch-clean. Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Meier, Roger 提交于
Goal: - building all variants of U-Boot with multiple configurations - code quality checks and metrics - https://travis-ci.org/u-boot/u-boot/builds
-
git://git.denx.de/u-boot-x86由 Tom Rini 提交于
Conflicts: tools/buildman/control.py Signed-off-by: NTom Rini <trini@ti.com>
-
- 14 1月, 2015 18 次提交
-
-
由 Masahiro Yamada 提交于
This commit was generated by the following command: scripts/fill_scrapyard.py The commit-ID of CPCIISER4 removal has been fixed by hand because the board was removed by commit 37057260 (ppc4xx: remove CPCIISER4 board), but it was added to README.scrapyard by commit 9a4018e0 (ppc4xx: remove DP405 board). Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
We are removing bunch of non-generic boards these days. Updating doc/README.scrapyard is a really tedious task, but it can be automated. I hope this tool will make our life easier. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Hans de Goede 提交于
The axp221 / axp223's N_VBUSEN pin can be configured as an output rather then an input, and this is used on some boards to control usb-vbus0, add support for this. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Most of the usb-controller init code found in ehci-sunxi.c also is necessary to init the otg usb controller, so move it to a common place. While at it also update various #ifdefs / defines for sun8i support. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
The axp221 / axp223's N_VBUSEN pin can be configured as an output rather then an input, add axp_drivebus_enable() and _disable() functions to set the pin in output mode and control it. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
The voltage setting code knows it needs to call axp221_init before calling the various voltage setting functions. But users of axp utility functions like axp221_get_sid() do not know this, so the utility functions always call axp221_init() to ensure that the p2wi / rsb setup magic has been done. Since doing this repeatedly is quite expensive, add a check to axp221_init so that it only does the initialization once. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Chen-Yu Tsai 提交于
ALDO2 is used to power LPDDR2 SDRAM on both the reference design and the Hummingbird A31, when this type of RAM is present. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The Hummingbird A31 uses an external DAC connected to the LCD0 outputs for the on board VGA output. The DAC has a power control that's toggled by GPIO. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
The external DAC for VGA output might have either a power or reset control pin that needs to be pulled up, as is the case on the Hummingbird A31. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Chen-Yu Tsai 提交于
Using an external DAC for VGA output was available on sun5i. Since some other SoCs don't have a builtin TV encoder, but might have use for a VGA output, enable the option for the platforms that don't have TV encoders. Signed-off-by: NChen-Yu Tsai <wens@csie.org> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Siarhei Siamashka 提交于
This allows to always have a complete log on the VGA/HDMI/LCD console. Signed-off-by: NSiarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Siarhei Siamashka 提交于
Currently the pre-console buffer can accumulate early log messages and flush them to the serial console as soon as it becomes available. This patch just adds one more pre-console buffer flushing point and does all the same for the other consoles too. This is particularly useful for the vga/hdmi/lcd console, where we can see all the older messages now (except for the log messages from SPL). Naturally, we don't want to get an extra copy of the log messages on the serial console again at the second flushing point, so the serial console has to be explicitly filtered out. Signed-off-by: NSiarhei Siamashka <siarhei.siamashka@gmail.com> Acked-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NTom Rini <trini@ti.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Jan Kiszka 提交于
"adr rX, text_end" only works if the label is close. Adding further code to the other functions will prevent this. So move the containing function close to label. No functional change. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Jan Kiszka 提交于
Based on the original version by Marc Zyngier. It adds a psci_cpu_off implementation for the A20 SoC. The mechanism works by first preparing the calling CPU to go offline (disable and flush cache, disable SMP), then requesting CPU 0 to pull the plug. The request is sent as FIQ on SGI15. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-
由 Hans de Goede 提交于
Add support for lvds lcd panels Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NAnatolij Gustschin <agust@denx.de>
-
由 Zoltan HERPAI 提交于
Add support for a sun4i board built by Linksprite. This addition covers both v1 and v2 versions. As the board has been working with 408MHz memory setting in the u-boot-sunxi branch, and has been proven to be running stable during my tests as well, a respective new DRAM config file is added as well. Signed-off-by: NZoltan HERPAI <wigyori@uid0.hu> Acked-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-
由 Hans de Goede 提交于
In some extreme cases it may be necessary to wait 1.5 seconds or more for a hpd signal to show up (and be able to read edid info), but we do not want to penalize all headless boots with an extra second boot delay, so add a hpd_delay parameter which can be set through the video-mode env. variable. While at it raise the default from 300ms to 500ms as 300 may very well be too low in many cases. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NIan Campbell <ijc@hellion.org.uk>
-