- 14 10月, 2008 14 次提交
-
-
由 Matthias Fuchs 提交于
This patch fixes building with CONFIG_API and CONFIG_USB_STORAGE. USB_MAX_STOR_DEV is defined in include/usb.h, but needed in api/api_storage.c. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com>
-
由 Peter Tyser 提交于
Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Peter Tyser 提交于
The checks for CFG_EEPROM_PAGE_WRITE_ENABLE and CFG_EEPROM_PAGE_WRITE_BITS in various temperature sensor drivers are not necessary Signed-off-by: NPeter Tyser <ptyser@xes-inc.com>
-
由 Mike Frysinger 提交于
Since we're working with unsigned data, you can't apply a signed pointer cast and then attempt to print the result. Otherwise you get wrong output when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF". Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Mike Frysinger 提交于
We don't need CONFIG_CFG_STRINGS anymore now that we have the define CONFIG_CMD_STRINGS and Makefile control. Signed-off-by: NMike Frysinger <vapier@gentoo.org>
-
由 Jason Jin 提交于
When the total size of all NAND devices exceeds 4 GiB, the size will overflow. This patch tries to fix this. Note that we still have a problem when a single NAND device is bigger than 4 GiB: then the overflow would actually happen earlier, i. e. when storing the size in nand_info[].size, as nand_info[].size is an "u_int32_t". Signed-off-by: NJason Jin <Jason.jin@freescale.com> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
-
-
由 Louis Su 提交于
Signed-off-by: NLouis Su <louis@asix.com.tw> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Andre Schwarz 提交于
Currently VSC8601 doesn't link with 10/100M partners if the EEPROM/Strapping is not set up. Setting the auto-neg register fixes this. Signed-off-by: NAndre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Nobuhiro Iwamatsu 提交于
get_prom function was used __attriute__ , but it is not enable. ax88796.o does not do link besides ne2000.o. When ld is carried out, get_prom function of ax88796.c is ignored. This problem is a thing by specifications of ld. I checked and test this patch on SuperH and MIPS. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NBen Warren <biggerbadderben@gmail.com>
-
由 Nobuhiro Iwamatsu 提交于
Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Nobuhiro Iwamatsu 提交于
Address calculated in EXPORT_FUNC in SuperH was wrong, I revised it. Signed-off-by: NNobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Ed Swarthout 提交于
Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com> Acked-by: NAndy Fleming <afleming@freescale.com>
-
- 13 10月, 2008 13 次提交
-
-
由 Hugo Villeneuve 提交于
This is no longer necessary now that the GD_FLG_RELOC flag is set for all ARM boards. Signed-off-by: NHugo Villeneuve <hugo.villeneuve@lyrtech.com>
-
由 Luigi 'Comio' Mantellini 提交于
Signed-off-by: NLuigi 'Comio' Mantellini <luigi.mantellini@idf-hit.com>
-
-
由 Nick Spence 提交于
This is needed in unlock_ram_in_cache() because it is called from C and will corrupt the small data area anchor that is kept in R2. lock_ram_in_cache() is modified similarly as good coding practice, but is not called from C. Signed-off-by: NNick Spence <nick.spence@freescale.com>
-
由 Kumar Gala 提交于
For some reason we duplicated the majority of code in lib_ppc/interrupts.c Not know how that happened, but there is no good reason for it. Use the interrupt_init_cpu() and timer_interrupt_cpu() since its why they exist. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Ed Swarthout 提交于
The flash_unlock_seq requires a sector for AMD_LEGACY. Fix a retcode check typeo. Signed-off-by: NEd Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Stefan Roese 提交于
-
-
-
-
-
-
-
- 10 10月, 2008 4 次提交
-
-
由 Matthias Fuchs 提交于
This patch fixes USB 2.0 communication issues on some DU440 boards. Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Matthias Fuchs 提交于
Signed-off-by: NMatthias Fuchs <matthias.fuchs@esd-electronics.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
- 09 10月, 2008 7 次提交
-
-
由 Kumar Gala 提交于
Commit 445a7b38 introduced the following compile warnings: cmd_i2c.c:112: warning: missing braces around initializer cmd_i2c.c:112: warning: (near initialization for 'i2c_no_probes[0]') Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Wolfgang Grandegger 提交于
Measurements with our MPC8544 board showed that the I2C bus frequency is wrong by a factor of 1.5. Obviously, the interpretation of the MPC85xx_PORDEVSR2_SEC_CFG bit of the cfg_sec_freq register is not correct. There seems to be an error in the 8544 RM. Signed-off-by: NWolfgang Grandegger <wg@grandegger.com>
-
由 Rafal Czubak 提交于
get_cpu_board_revision() returned board revision based on information stored in global static struct eeprom. It should instead use one from local struct board_eeprom, to which the data is actually read from EEPROM. The bug led to system hang after printing L1 cache information on U-Boot startup. The problem was observed on MPC8555CDS system and possibly affects other Freescale MPC85xx boards using CFG_I2C_EEPROM_CCID. The change has been successfully tested on MPC8555CDS system. Signed-off-by: NRafal Czubak <rcz@semihalf.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
由 Guennadi Liakhovetski 提交于
Switch to the standard CFG_HZ=1000 value, while at it, minor white-space cleanup, remove CFG_CLKS_IN_HZ from config-headers. Tested on mx31ads, provides 2% or 0.4% precision depending on the CONFIG_MX31_TIMER_HIGH_PRECISION flag. Measured with stop-watch on 100s boot-delay. Signed-off-by: NGuennadi Liakhovetski <lg@denx.de>
-
由 gnusercn 提交于
due to the arm implementation which supposed that U-Boot is in RAM when we jump to start_armboot Signed-off-by: Ngnusercn <gnusercn@gmail.com> Signed-off-by: NJean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-
- 08 10月, 2008 2 次提交
-
-
由 Adam Graham 提交于
After changing SDRAM_CLKTR phase value rerun the memory preload initialization sequence (INITPLR) to reset and relock the memory DLL. Changing the SDRAM_CLKTR memory clock phase coarse timing adjustment effects the phase relationship of the internal, to the PPC chip, and external, to the PPC chip, versions of MEMCLK_OUT. Signed-off-by: NAdam Graham <agraham@amcc.com> Signed-off-by: NVictor Gallardo <vgallardo@amcc.com> Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Haiying Wang 提交于
Signed-off-by: NHaiying Wang <Haiying.Wang@freescale.com>
-