Merge branch 'master' of /home/stefan/git/u-boot/u-boot

README.imx31

-i.MX31 specific Configuration Options:
---------------------------------------
-
-- Timer precision:
-		CONFIG_MX31_TIMER_HIGH_PRECISION
-
-		Enable higher precision timer. The low-precision timer
-		(default) provides approximately 4% error, whereas the
-		high-precision timer is about 0.4% accurate. The extra
-		accuracy is achieved at the cost of higher computational
-		overhead, which, in places where time is measured, should
-		not be critical, so, it should be safe to enable this
-		option.

board/freescale/common/sys_eeprom.c

@@ -463,6 +463,6 @@ unsigned int get_cpu_board_revision(void)
 	if ((be.major == 0xff) && (be.minor == 0xff))
 		return MPC85XX_CPU_BOARD_REV(0, 0);
 
-	return MPC85XX_CPU_BOARD_REV(e.major, e.minor);
+	return MPC85XX_CPU_BOARD_REV(be.major, be.minor);
 }
 #endif

board/freescale/mpc8313erdb/sdram.c

@@ -64,7 +64,7 @@ static long fixed_sdram(void)
 	volatile immap_t *im = (volatile immap_t *)CFG_IMMR;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
 	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
 

board/freescale/mpc8315erdb/sdram.c

@@ -60,7 +60,7 @@ static long fixed_sdram(void)
 	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE  & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
 	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
 

board/freescale/mpc8349emds/mpc8349emds.c

@@ -109,7 +109,7 @@ int fixed_sdram(void)
 			return -1;
 		}
 	}
-	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
 #if (CFG_DDR_SIZE != 256)

board/freescale/mpc8349itx/mpc8349itx.c

@@ -55,7 +55,7 @@ int fixed_sdram(void)
 
 	im->sysconf.ddrlaw[0].ar =
 	    LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
-	im->sysconf.ddrlaw[0].bar = (CFG_DDR_SDRAM_BASE >> 12) & 0xfffff;
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
 
 	/* Only one CS0 for DDR */
 	im->ddr.csbnds[0].csbnds = 0x0000000f;

board/freescale/mpc837xemds/mpc837xemds.c

@@ -108,7 +108,7 @@ int fixed_sdram(void)
 	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
 
 #if (CFG_DDR_SIZE != 512)

board/freescale/mpc837xerdb/mpc837xerdb.c

@@ -96,7 +96,7 @@ int fixed_sdram(void)
 	u32 msize = CFG_DDR_SIZE * 1024 * 1024;
 	u32 msize_log2 = __ilog2(msize);
 
-	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
 
 	im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;

board/matrix_vision/mvblm7/mvblm7.c

@@ -50,7 +50,7 @@ int fixed_sdram(void)
 		if (ddr_size & 1)
 			return -1;
 	}
-	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) &
 		LAWAR_SIZE);
 

board/sbc8349/sbc8349.c

@@ -101,7 +101,7 @@ int fixed_sdram(void)
 			return -1;
 		}
 	}
-	im->sysconf.ddrlaw[0].bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
 	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
 #if (CFG_DDR_SIZE != 256)

cpu/arm1136/mx31/interrupts.c

@@ -27,30 +27,49 @@
 #define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
 
 /* General purpose timers registers */
-#define GPTCR   __REG(TIMER_BASE) /* Control register */
-#define GPTPR  __REG(TIMER_BASE + 0x4) /* Prescaler register */
-#define GPTSR   __REG(TIMER_BASE + 0x8) /* Status register */
-#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
+#define GPTCR	__REG(TIMER_BASE)		/* Control register	*/
+#define GPTPR	__REG(TIMER_BASE + 0x4)		/* Prescaler register	*/
+#define GPTSR	__REG(TIMER_BASE + 0x8)		/* Status register	*/
+#define GPTCNT	__REG(TIMER_BASE + 0x24)	/* Counter register	*/
 
 /* General purpose timers bitfields */
-#define GPTCR_SWR       (1<<15) /* Software reset */
-#define GPTCR_FRR       (1<<9)  /* Freerun / restart */
-#define GPTCR_CLKSOURCE_32 (4<<6)  /* Clock source */
-#define GPTCR_TEN       (1)     /* Timer enable */
+#define GPTCR_SWR		(1 << 15)	/* Software reset	*/
+#define GPTCR_FRR		(1 << 9)	/* Freerun / restart	*/
+#define GPTCR_CLKSOURCE_32	(4 << 6)	/* Clock source		*/
+#define GPTCR_TEN		1		/* Timer enable		*/
+
+/* "time" is measured in 1 / CFG_HZ seconds, "tick" is internal timer period */
+#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION
+/* ~0.4% error - measured with stop-watch on 100s boot-delay */
+#define TICK_TO_TIME(t)	((t) * CFG_HZ / CONFIG_MX31_CLK32)
+#define TIME_TO_TICK(t)	((unsigned long long)(t) * CONFIG_MX31_CLK32 / CFG_HZ)
+#define US_TO_TICK(t)	(((unsigned long long)(t) * CONFIG_MX31_CLK32 + \
+			999999) / 1000000)
+#else
+/* ~2% error */
+#define TICK_PER_TIME	((CONFIG_MX31_CLK32 + CFG_HZ / 2) / CFG_HZ)
+#define US_PER_TICK	(1000000 / CONFIG_MX31_CLK32)
+#define TICK_TO_TIME(t)	((t) / TICK_PER_TIME)
+#define TIME_TO_TICK(t)	((unsigned long long)(t) * TICK_PER_TIME)
+#define US_TO_TICK(t)	(((t) + US_PER_TICK - 1) / US_PER_TICK)
+#endif
 
 static ulong timestamp;
 static ulong lastinc;
 
 /* nothing really to do with interrupts, just starts up a counter. */
+/* The 32768Hz 32-bit timer overruns in 131072 seconds */
 int interrupt_init (void)
 {
 	int i;
 
 	/* setup GP Timer 1 */
 	GPTCR = GPTCR_SWR;
-	for ( i=0; i<100; i++) GPTCR = 0; /* We have no udelay by now */
+	for (i = 0; i < 100; i++)
+		GPTCR = 0; /* We have no udelay by now */
 	GPTPR = 0; /* 32Khz */
-	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN; /* Freerun Mode, PERCLK1 input */
+	/* Freerun Mode, PERCLK1 input */
+	GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
 
 	return 0;
 }
@@ -67,7 +86,7 @@ void reset_timer(void)
 	reset_timer_masked();
 }
 
-ulong get_timer_masked (void)
+unsigned long long get_ticks (void)
 {
 	ulong now = GPTCNT; /* current tick value */
 
@@ -80,6 +99,17 @@ ulong get_timer_masked (void)
 	return timestamp;
 }
 
+ulong get_timer_masked (void)
+{
+	/*
+	 * get_ticks() returns a long long (64 bit), it wraps in
+	 * 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
+	 * 5 * 10^9 days... and get_ticks() * CFG_HZ wraps in
+	 * 5 * 10^6 days - long enough.
+	 */
+	return TICK_TO_TIME(get_ticks());
+}
+
 ulong get_timer (ulong base)
 {
 	return get_timer_masked () - base;
@@ -87,29 +117,20 @@ ulong get_timer (ulong base)
 
 void set_timer (ulong t)
 {
+	timestamp = TIME_TO_TICK(t);
 }
 
 /* delay x useconds AND perserve advance timstamp value */
 void udelay (unsigned long usec)
 {
-	ulong tmo, tmp;
-
-	if (usec >= 1000) {			/* if "big" number, spread normalization to seconds */
-		tmo = usec / 1000;		/* start to normalize for usec to ticks per sec */
-		tmo *= CFG_HZ;			/* find number of "ticks" to wait to achieve target */
-		tmo /= 1000;			/* finish normalize. */
-	} else {					/* else small number, don't kill it prior to HZ multiply */
-		tmo = usec * CFG_HZ;
-		tmo /= (1000*1000);
-	}
-
-	tmp = get_timer (0);		/* get current timestamp */
-	if ( (tmo + tmp + 1) < tmp )/* if setting this forward will roll time stamp */
-		reset_timer_masked ();	/* reset "advancing" timestamp to 0, set lastinc value */
-	else
-		tmo	+= tmp;				/* else, set advancing stamp wake up time */
-	while (get_timer_masked () < tmo)/* loop till event */
-		/*NOP*/;
+	unsigned long long tmp;
+	ulong tmo;
+
+	tmo = US_TO_TICK(usec);
+	tmp = get_ticks() + tmo;	/* get current timestamp */
+
+	while (get_ticks() < tmp)	/* loop till event */
+		 /*NOP*/;
 }
 
 void reset_cpu (ulong addr)

cpu/mpc83xx/spd_sdram.c

@@ -274,7 +274,7 @@ long int spd_sdram()
 	/*
 	 * Set up LAWBAR for all of DDR.
 	 */
-	ecm->bar = ((CFG_DDR_SDRAM_BASE>>12) & 0xfffff);
+	ecm->bar = CFG_DDR_SDRAM_BASE & 0xfffff000;
 	ecm->ar  = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
 	debug("DDR:bar=0x%08x\n", ecm->bar);
 	debug("DDR:ar=0x%08x\n", ecm->ar);

cpu/mpc85xx/cpu.c

@@ -85,7 +85,8 @@ int checkcpu (void)
 	struct cpu_type *cpu;
 #ifdef CONFIG_DDR_CLK_FREQ
 	volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
-	u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+		>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 #else
 	u32 ddr_ratio = 0;
 #endif

cpu/mpc85xx/fdt.c

@@ -152,7 +152,6 @@ static inline void ft_fixup_l2cache(void *blob)
 	}
 	fdt_setprop(blob, off, "cache-unified", NULL, 0);
 	fdt_setprop_cell(blob, off, "cache-block-size", line_size);
-	fdt_setprop_cell(blob, off, "cache-line-size", line_size);
 	fdt_setprop_cell(blob, off, "cache-size", size);
 	fdt_setprop_cell(blob, off, "cache-sets", num_sets);
 	fdt_setprop_cell(blob, off, "cache-level", 2);
@@ -181,7 +180,6 @@ static inline void ft_fixup_cache(void *blob)
 		dnum_sets = dsize / (dline_size * dnum_ways);
 
 		fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
-		fdt_setprop_cell(blob, off, "d-cache-line-size", dline_size);
 		fdt_setprop_cell(blob, off, "d-cache-size", dsize);
 		fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
 
@@ -192,7 +190,6 @@ static inline void ft_fixup_cache(void *blob)
 		inum_sets = isize / (iline_size * inum_ways);
 
 		fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
-		fdt_setprop_cell(blob, off, "i-cache-line-size", iline_size);
 		fdt_setprop_cell(blob, off, "i-cache-size", isize);
 		fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
 

cpu/mpc85xx/speed.c

@@ -54,7 +54,8 @@ void get_sys_info (sys_info_t * sysInfo)
 
 #ifdef CONFIG_DDR_CLK_FREQ
 	{
-		u32 ddr_ratio = ((gur->porpllsr) & 0x00003e00) >> 9;
+		u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
+			>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 		if (ddr_ratio != 0x7)
 			sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
 	}
@@ -101,9 +102,9 @@ int get_clocks (void)
 	 * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
 	 */
 	if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
-		gd->i2c1_clk = sys_info.freqSystemBus / 3;
-	else
 		gd->i2c1_clk = sys_info.freqSystemBus / 2;
+	else
+		gd->i2c1_clk = sys_info.freqSystemBus / 3;
 #else
 	/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
 	gd->i2c1_clk = sys_info.freqSystemBus / 2;

doc/README.imx31

+U-Boot for Freescale i.MX31
+
+This file contains information for the port of U-Boot to the Freescale
+i.MX31 SoC.
+
+1. CONFIGURATION OPTIONS/SETTINGS
+---------------------------------
+
+1.1 Configuration of MC13783 SPI bus
+------------------------------------
+	The power management companion chip MC13783 is connected to the
+	i.MX31 via an SPI bus. Use the following configuration options
+	to setup the bus and chip select used for a particular board.
+
+	CONFIG_MC13783_SPI_BUS	-- defines the SPI bus the MC13783 is connected to.
+			   Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3.
+	CONFIG_MC13783_SPI_CS	-- define the chip select the MC13783 s connected to.
+
+1.2 Timer precision
+-------------------
+	CONFIG_MX31_TIMER_HIGH_PRECISION
+
+	Enable higher precision timer. The low-precision timer
+	(default) provides approximately 4% error, whereas the
+	high-precision timer is about 0.4% accurate. The extra
+	accuracy is achieved at the cost of higher computational
+	overhead, which, in places where time is measured, should
+	not be critical, so, it should be safe to enable this
+	option.

doc/README.mx31

-U-Boot for Freescale i.MX31
-
-This file contains information for the port of U-Boot to the Freescale
-i.MX31 SoC.
-
-1. CONFIGURATION OPTIONS/SETTINGS
----------------------------------
-
-1.1 Configuration of MC13783 SPI bus
-------------------------------------
-The power management companion chip MC13783 is connected to the
-i.MX31 via an SPI bus. Use the following configuration options
-to setup the bus and chip select used for a particular board.
-
-CONFIG_MC13783_SPI_BUS	-- defines the SPI bus the MC13783 is connected to.
-			   Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3.
-CONFIG_MC13783_SPI_CS	-- define the chip select the MC13783 s connected to.

doc/uImage.FIT/multi.its

@@ -56,6 +56,7 @@
 			data = /incbin/("./eldk-4.2-ramdisk");
 			type = "ramdisk";
 			arch = "ppc";
+			os = "linux";
 			compression = "gzip";
 			hash@1 {
 				algo = "sha1";
@@ -67,6 +68,7 @@
 			data = /incbin/("./eldk-3.1-ramdisk");
 			type = "ramdisk";
 			arch = "ppc";
+			os = "linux";
 			compression = "gzip";
 			hash@1 {
 				algo = "crc32";

drivers/mtd/cfi_flash.c

@@ -1932,9 +1932,10 @@ ulong flash_get_size (ulong base, int banknum)
 			/* XXX - Need to test on x8/x16 in parallel. */
 			info->portwidth >>= 1;
 		}
+
+		flash_write_cmd (info, 0, 0, info->cmd_reset);
 	}
 
-	flash_write_cmd (info, 0, 0, info->cmd_reset);
 	return (info->size);
 }
 

include/asm-ppc/immap_85xx.h

@@ -1552,6 +1552,13 @@ typedef struct par_io {
  */
 typedef struct ccsr_gur {
 	uint	porpllsr;	/* 0xe0000 - POR PLL ratio status register */
+#ifdef CONFIG_MPC8536
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x3e000000
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	25
+#else
+#define MPC85xx_PORPLLSR_DDR_RATIO	0x00003e00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	9
+#endif
 	uint	porbmsr;	/* 0xe0004 - POR boot mode status register */
 #define MPC85xx_PORBMSR_HA		0x00070000
 	uint	porimpscr;	/* 0xe0008 - POR I/O impedance status and control register */

include/configs/MPC8313ERDB.h

@@ -174,6 +174,7 @@
 #define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
 #define CFG_FLASH_SIZE		8		/* flash size in MB */
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 #define CFG_FLASH_EMPTY_INFO			/* display empty sectors */
 #define CFG_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
 
@@ -596,7 +597,7 @@
 #define CONFIG_FDTFILE		mpc8313erdb.dtb
 
 #define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200
 
 #define XMK_STR(x)	#x

include/configs/MPC8315ERDB.h

@@ -193,6 +193,7 @@
 
 #define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
 #define CFG_FLASH_SIZE		8 /* FLASH size is 8M */
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
 #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
 #define CFG_LBLAWAR0_PRELIM	0x80000016 /* 8MB window size */

include/configs/MPC8323ERDB.h

@@ -181,6 +181,7 @@
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
 #define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
 #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
 #define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */
@@ -570,7 +571,7 @@
 #define CONFIG_FDTFILE		mpc832x_rdb.dtb
 
 #define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200
 
 #define XMK_STR(x)	#x

include/configs/MPC832XEMDS.h

@@ -169,6 +169,7 @@
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000	/* FLASH base address */
 #define CFG_FLASH_SIZE		16	/* FLASH size is 16M */
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
 #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
 #define CFG_LBLAWAR0_PRELIM	0x80000018	/* 32MB window size */

include/configs/MPC8349EMDS.h

@@ -156,6 +156,7 @@
 #define CONFIG_FLASH_CFI_DRIVER			/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
 #define CFG_FLASH_SIZE		32		/* max flash size in MB */
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 /* #define CFG_FLASH_USE_BUFFER_WRITE */
 
 #define CFG_BR0_PRELIM		(CFG_FLASH_BASE |	/* flash Base address */ \

include/configs/MPC8349ITX.h

@@ -190,6 +190,7 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
 #define CFG_FLASH_SIZE		16		/* FLASH size in MB */
 #define CFG_FLASH_SIZE_SHIFT	4		/* log2 of the above value */
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
 /* Vitesse 7385 */
 

include/configs/MPC8360EMDS.h

@@ -194,6 +194,7 @@
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
 #define CFG_FLASH_SIZE		32 /* max FLASH size is 32M */
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
 
 #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */

include/configs/MPC837XEMDS.h

@@ -229,6 +229,7 @@
 #define CONFIG_FLASH_CFI_DRIVER	/* use the CFI driver */
 #define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
 #define CFG_FLASH_SIZE		32 /* max FLASH size is 32M */
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 
 #define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE /* Window base at flash base */
 #define CFG_LBLAWAR0_PRELIM	0x80000018 /* 32MB window size */

include/configs/MPC837XERDB.h

@@ -253,6 +253,7 @@
 #define CFG_FLASH_BASE		0xFE000000 /* FLASH base address */
 #define CFG_FLASH_SIZE		8 /* max FLASH size is 32M */
 
+#define CFG_FLASH_PROTECTION	1		/* Use h/w Flash protection. */
 #define CFG_FLASH_EMPTY_INFO			/* display empty sectors */
 #define CFG_FLASH_USE_BUFFER_WRITE		/* buffer up multiple bytes */
 
@@ -632,7 +633,7 @@
 #define CONFIG_FDTFILE		mpc8379_rdb.dtb
 
 #define CONFIG_LOADADDR		500000	/* default location for tftp and bootm */
-#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
 #define CONFIG_BAUDRATE		115200
 
 #define XMK_STR(x)	#x

include/configs/MPC8536DS.h

@@ -59,7 +59,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #endif
 #define CONFIG_SYS_CLK_FREQ	get_board_sys_clk(0) /* sysclk for MPC85xx */
-/* #define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0) /\* ddrclk for MPC85xx *\/ FIXME-8536*/
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk(0)
 #define CONFIG_ICS307_REFCLK_HZ	33333000  /* ICS307 clock chip ref freq */
 #define CONFIG_GET_CLK_FROM_ICS307	  /* decode sysclk and ddrclk freq
 					     from ICS307 instead of switches */
@@ -303,7 +303,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_ID_EEPROM
 #ifdef CONFIG_ID_EEPROM
-#define CONFIG_ID_EEPROM
 #define CFG_I2C_EEPROM_NXID
 #endif
 #define CFG_I2C_EEPROM_ADDR	0x57

include/configs/MPC8572DS.h

@@ -108,6 +108,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_CHIP_SELECTS_PER_CTRL	2
 
 /* I2C addresses of SPD EEPROMs */
+#define CFG_SPD_BUS_NUM		1	/* SPD EEPROMS locate on I2C bus 1 */
 #define SPD_EEPROM_ADDRESS1	0x51	/* CTLR 0 DIMM 0 */
 #define SPD_EEPROM_ADDRESS2	0x52	/* CTLR 1 DIMM 0 */
 
@@ -293,11 +294,25 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 #define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
 #define CONFIG_HARD_I2C		/* I2C with hardware support */
 #undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
 #define CFG_I2C_EEPROM_ADDR	0x57
 #define CFG_I2C_SLAVE		0x7F
-#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CFG_I2C_OFFSET		0x3100
+#define CFG_I2C_NOPROBES	{{0,0x29}}/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+#define CFG_I2C2_OFFSET		0x3100
+
+/*
+ * I2C2 EEPROM
+ */
+#define CONFIG_ID_EEPROM
+#ifdef CONFIG_ID_EEPROM
+#define CFG_I2C_EEPROM_NXID
+#endif
+#define CFG_I2C_EEPROM_ADDR	0x57
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_BUS_NUM	1
 
 /*
  * General PCI

include/configs/TQM5200.h

@@ -720,6 +720,9 @@
 /* Interval between registers						     */
 #define CFG_ATA_STRIDE		4
 
+/* Support ATAPI devices */
+#define CONFIG_ATAPI            1
+
 /*-----------------------------------------------------------------------
  * Open firmware flat tree support
  *-----------------------------------------------------------------------

include/configs/imx31_litekit.h

@@ -122,11 +122,9 @@
 #define CFG_MEMTEST_START	0  /* memtest works on */
 #define CFG_MEMTEST_END		0x10000
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
 #define CFG_LOAD_ADDR		0 /* default load address */
 
-#define CFG_HZ			32000
+#define CFG_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING	1
 

include/configs/imx31_phycore.h

@@ -126,7 +126,7 @@
 
 #define CFG_LOAD_ADDR		0 /* default load address */
 
-#define CFG_HZ			32000
+#define CFG_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING	1
 

include/configs/mx31ads.h

@@ -139,11 +139,9 @@
 #define CFG_MEMTEST_START	0		/* memtest works on */
 #define CFG_MEMTEST_END		0x10000
 
-#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
-
 #define CFG_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CFG_HZ			CONFIG_MX31_CLK32 /* use 32kHz clock as source */
+#define CFG_HZ			1000
 
 #define CONFIG_CMDLINE_EDITING	1
 

include/libfdt.h

@@ -122,7 +122,7 @@
 /* Low-level functions (you probably don't need these)                */
 /**********************************************************************/
 
-const void *fdt_offset_ptr(const void *fdt, int offset, int checklen);
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen);
 static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen)
 {
 	return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen);
@@ -458,6 +458,32 @@ static inline void *fdt_getprop_w(void *fdt, int nodeoffset,
  */
 uint32_t fdt_get_phandle(const void *fdt, int nodeoffset);
 
+/**
+ * fdt_get_alias_namelen - get alias based on substring
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ * @namelen: number of characters of name to consider
+ *
+ * Identical to fdt_get_alias(), but only examine the first namelen
+ * characters of name for matching the alias name.
+ */
+const char *fdt_get_alias_namelen(const void *fdt,
+				  const char *name, int namelen);
+
+/**
+ * fdt_get_alias - retreive the path referenced by a given alias
+ * @fdt: pointer to the device tree blob
+ * @name: name of the alias th look up
+ *
+ * fdt_get_alias() retrieves the value of a given alias.  That is, the
+ * value of the property named 'name' in the node /aliases.
+ *
+ * returns:
+ *	a pointer to the expansion of the alias named 'name', of it exists
+ *	NULL, if the given alias or the /aliases node does not exist
+ */
+const char *fdt_get_alias(const void *fdt, const char *name);
+
 /**
  * fdt_get_path - determine the full path of a node
  * @fdt: pointer to the device tree blob

include/mpc83xx.h

@@ -528,7 +528,7 @@
 #if defined(CONFIG_MPC834X)
 #define HRCWH_ROM_LOC_PCI2		0x00200000
 #endif
-#if defined(CONIFG_MPC837X)
+#if defined(CONFIG_MPC837X)
 #define HRCWH_ROM_LOC_ON_CHIP_ROM	0x00300000
 #endif
 #define HRCWH_ROM_LOC_LOCAL_8BIT	0x00500000

lib_arm/board.c

@@ -220,18 +220,6 @@ static int init_func_i2c (void)
 }
 #endif
 
-#ifdef CONFIG_SKIP_RELOCATE_UBOOT
-/*
- * This routine sets the relocation done flag, because even if
- * relocation is skipped, the flag is used by other generic code.
- */
-static int reloc_init(void)
-{
-	gd->flags |= GD_FLG_RELOC;
-	return 0;
-}
-#endif
-
 /*
  * Breathe some life into the board...
  *
@@ -261,11 +249,6 @@ int print_cpuinfo (void); /* test-only */
 
 init_fnc_t *init_sequence[] = {
 	cpu_init,		/* basic cpu dependent setup */
-#if defined(CONFIG_SKIP_RELOCATE_UBOOT)
-	reloc_init,		/* Set the relocation done flag, must
-				   do this AFTER cpu_init(), but as soon
-				   as possible */
-#endif
 	board_init,		/* basic board dependent setup */
 	interrupt_init,		/* set up exceptions */
 	env_init,		/* initialize environment */
@@ -307,6 +290,8 @@ void start_armboot (void)
 	gd->bd = (bd_t*)((char*)gd - sizeof(bd_t));
 	memset (gd->bd, 0, sizeof (bd_t));
 
+	gd->flags |= GD_FLG_RELOC;
+
 	monitor_flash_len = _bss_start - _armboot_start;
 
 	for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {

lib_ppc/bootm.c

@@ -145,7 +145,7 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
 	 * if the user wants it (the logic is in the subroutines).
 	 */
 	if (of_size) {
-		if (fdt_chosen(of_flat_tree, 0) < 0) {
+		if (fdt_chosen(of_flat_tree, 1) < 0) {
 			puts ("ERROR: ");
 			puts ("/chosen node create failed");
 			puts (" - must RESET the board to recover.\n");

libfdt/fdt.c

@@ -78,7 +78,7 @@ int fdt_check_header(const void *fdt)
 	return 0;
 }
 
-const void *fdt_offset_ptr(const void *fdt, int offset, int len)
+const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int len)
 {
 	const char *p;
 

libfdt/fdt_ro.c

@@ -145,17 +145,12 @@ int fdt_path_offset(const void *fdt, const char *path)
 
 	/* see if we have an alias */
 	if (*path != '/') {
-		const char *q;
-		int aliasoffset = fdt_path_offset(fdt, "/aliases");
-
-		if (aliasoffset < 0)
-			return -FDT_ERR_BADPATH;
+		const char *q = strchr(path, '/');
 
-		q = strchr(path, '/');
 		if (!q)
 			q = end;
 
-		p = fdt_getprop_namelen(fdt, aliasoffset, path, q - p, NULL);
+		p = fdt_get_alias_namelen(fdt, p, q - p);
 		if (!p)
 			return -FDT_ERR_BADPATH;
 		offset = fdt_path_offset(fdt, p);
@@ -306,6 +301,23 @@ uint32_t fdt_get_phandle(const void *fdt, int nodeoffset)
 	return fdt32_to_cpu(*php);
 }
 
+const char *fdt_get_alias_namelen(const void *fdt,
+				  const char *name, int namelen)
+{
+	int aliasoffset;
+
+	aliasoffset = fdt_path_offset(fdt, "/aliases");
+	if (aliasoffset < 0)
+		return NULL;
+
+	return fdt_getprop_namelen(fdt, aliasoffset, name, namelen, NULL);
+}
+
+const char *fdt_get_alias(const void *fdt, const char *name)
+{
+	return fdt_get_alias_namelen(fdt, name, strlen(name));
+}
+
 int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 {
 	int pdepth = 0, p = 0;
@@ -320,9 +332,6 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 	for (offset = 0, depth = 0;
 	     (offset >= 0) && (offset <= nodeoffset);
 	     offset = fdt_next_node(fdt, offset, &depth)) {
-		if (pdepth < depth)
-			continue; /* overflowed buffer */
-
 		while (pdepth > depth) {
 			do {
 				p--;
@@ -330,14 +339,16 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 			pdepth--;
 		}
 
-		name = fdt_get_name(fdt, offset, &namelen);
-		if (!name)
-			return namelen;
-		if ((p + namelen + 1) <= buflen) {
-			memcpy(buf + p, name, namelen);
-			p += namelen;
-			buf[p++] = '/';
-			pdepth++;
+		if (pdepth >= depth) {
+			name = fdt_get_name(fdt, offset, &namelen);
+			if (!name)
+				return namelen;
+			if ((p + namelen + 1) <= buflen) {
+				memcpy(buf + p, name, namelen);
+				p += namelen;
+				buf[p++] = '/';
+				pdepth++;
+			}
 		}
 
 		if (offset == nodeoffset) {
@@ -347,7 +358,7 @@ int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen)
 			if (p > 1) /* special case so that root path is "/", not "" */
 				p--;
 			buf[p] = '\0';
-			return p;
+			return 0;
 		}
 	}