- 27 8月, 2017 30 次提交
-
-
由 Tom Rini 提交于
While it is true that we no longer have 'ppcenv' and similar sections, including env/embedded.o at all results in the text/etc sections being available for the rest of the link. This in turn is required for the setup used on ms7722se. This also, likely, needs further fine-tuning. Fixes: f40ad66f ("arch/sh: don't bring common/env_embedded.o into the link") Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
In order to be able to reliably use fdt_totalsize, we must have <libfdt.h> included. Fixes: 767cb74a ("cmd: spl: provide address and size of prepared FDT ...") Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
When reworking this code to fix other issues found by Coverity, I forgot to ensure tmp_ep was always cleared before use. Reported-by: Coverity (CID: 166612) Fixes: bc028345 ("mtdparts: Fix final outstanding issue reported by Coverity") Signed-off-by: NTom Rini <trini@konsulko.com>
-
-
-
-
-
-
由 Stefan Agner 提交于
When using ISO partitions with a DMA enabled block device driver reading the ISO partition leads to unaligned DMA operations: CACHE: Misaligned operation at range [bffb7da8, bffb85a8] Align the buffer to make sure we pass a buffer which works for DMA operations. Signed-off-by: NStefan Agner <stefan.agner@toradex.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Stephen Boyd 提交于
If the kernel is configured to be built with debug symbols, or has bug tables, comparing files may not work if line numbers change. This makes comparing object files with these options harder to do. Let's strip out the debug info and drop the __bug_table here so that we don't see false positives. There may be other things to drop later, and it may be architecture specific, but this works for me with my ARM64 build. [ Import Linux commit: 65ba6fa439e7c3cbf97de9dce9e7a3390ae2638c ] Signed-off-by: NStephen Boyd <stephen.boyd@linaro.org> Reviewed-by: NJason Cooper <jason@lakedaemon.net> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Tom Rini 提交于
While &p_jdb[fs->blksz] is a valid expression (it points *one* char sized element past the end of the array, e.g. &p_jdb[fs->blksz + 1] is invalid (according to the C standard (C99/C11)). Changing this to tag = (struct ext3_journal_block_tag *)(p_jdb + ofs); Cc: Stefan Brüns <stefan.bruens@rwth-aachen.de> Suggested-by: NStefan Brüns <stefan.bruens@rwth-aachen.de> Reported-by: Coverity (CID: 165117, 165110) Signed-off-by: NTom Rini <trini@konsulko.com> Reviewed-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
-
由 Tom Rini 提交于
As part of fixing the previously reported issues, it was missed that in the case of mtdparts_init() we need to make sure that tmp_ep is long enough to contain PARTITION_MAXLEN and a NULL termination. Then, to be sure the buffer is NULL terminated, zero the entire buffer rather than just ensuring the first character is NULL. Cc: Lothar Waßmann <LW@KARO-electronics.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reported-by: Coverity (CID: 166329) Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Vikas Manocha 提交于
With this change, it will be possible to de-select falcon mode & spl will only boot U-Boot. Signed-off-by: NVikas Manocha <vikas.manocha@st.com> Suggested-by: NBo Shen <voice.shen@gmail.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Anatolij Gustschin 提交于
Writing prepared FDT to persistent storage should be possible in scripts. Create environment variables containing address and size of the updated FDT. Scripts can use these variables after running 'spl export fdt ...' command to write the new blob to persistent storage. Signed-off-by: NAnatolij Gustschin <agust@denx.de>
-
由 Pau Pajuelo 提交于
Update igep00x0 code with the following features: - Add board and revision detection for the boards: - IGEP0020-RF - IGEP0020-RC - IGEP0030-RG - IGEP0030-RE - Merge IGEP0020 and IGEP0030 mux tables - Add suport to use GPIO_126, GPIO_127 and GPIO_129 - board_name and board_rev environment variables display board and revision informations - Move dtb name selection from code to boot script Signed-off-by: NPau Pajuelo <ppajuel@gmail.com> Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Tested-by: NPau Pajuelo <ppajuel@gmail.com>
-
由 Ladislav Michl 提交于
Avoid cluttering board file with CONFIG_SPL_BUILD ifdefs by moving SPL related functions into separate file. Signed-off-by: NLadislav Michl <ladis@linux-mips.org> Tested-by: NPau Pajuelo <ppajuel@gmail.com> Acked-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
-
由 Semen Protsenko 提交于
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Semen Protsenko 提交于
Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Semen Protsenko 提交于
If SD card is present -- try to boot from it first. If no -- try to boot Android from eMMC. Signed-off-by: NSam Protsenko <semen.protsenko@linaro.org>
-
由 Ruchika Gupta 提交于
kASLR support in kernel requires a random number to be passed via chosen/kaslr-seed propert. sec_firmware generates this random seed which can then be passed in the device tree node. sec_firmware reserves JR3 for it's own usage. Node for JR3 is removed from device-tree. Signed-off-by: NRuchika Gupta <ruchika.gupta@nxp.com>
-
由 Thomas Petazzoni 提交于
do_switch_ecc() calls fsmc_nand_switch_ecc(), which is a direct function call into drivers/mtd/nand/fsmc_nand.c. However, this function is not guarded by CONFIG_NAND_FSMC, which results to a build failure if CONFIG_NAND_FSMC is disabled. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
由 Thomas Petazzoni 提交于
The code in board/spear/common/ is not board-specific but SoC-specific. Therefore, boards from other vendors than "spear" may want to re-use this code, which is currently difficult with the code being placed in board/spear/common/. Since this code really is SoC-specific, this commit moves it to arch/arm/cpu/arm926ejs/spear/, with the rest of the SPEAr related code. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
Use the Atmel PIT timer driver which supports the driver model and device tree. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
Add the new Atmel PIT timer driver, which supports the driver model and device tree. Signed-off-by: NWenyou Yang <wenyou.yang@microchip.com>
-
由 Tom Rini 提交于
The function interrupt_init_cpu() is given an int return type but does not return anything but 0. Rework this to be a void function. Signed-off-by: NTom Rini <trini@konsulko.com> Acked-by: NMario Six <mario.six@gdsys.cc>
-
由 Reno Farnesi 提交于
The overflow calculation was incorrect. Adding the start block of the partition is not needed because the sectors are already relative to the beginning of the partition. If you attempted to write a file smaller than cur_part_info.start blocks on a full partition the old calculation fails to catch the overflow. This would cause an infinite loop in the determine_fatent function. Old, incorrect calculation: ending sector of new file = start sector + file size (in sectors) last sector = partition start + total sectors on the partition Adding the partition start block number is not needed because sectors are already relative to the start of the partition. New calculation: ending sector of new file = start sector + file size (in sectors) last sector = total sectors on the partition Signed-off-by: NReno Farnesi <nfarnesi4@gmail.com>
-
由 Suniel Mahesh 提交于
This re-syncs AM33xx DTS file with current file from Linux v4.13-rc4 to ensure a consistent configuration. Upstream Linux removed the redundant Interrupt-parent property from mmc, mac, lcdc and tscadc sub nodes. Signed-off-by: NSuniel Mahesh <sunil.m@techveda.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Jagan Teki 提交于
Signed-off-by: NJagan Teki <jagan@amarulasolutions.com>
-
由 Simon Glass 提交于
This is currently disabled, so USB keyboards are not detected in U-Boot. Enable this option to fix that. Signed-off-by: NSimon Glass <sjg@chromium.org> Tested-by: NJonathan Gray <jsg@jsg.id.au> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Tested-by: NPaul Barker <pbarker@toganlabs.com>
-
- 26 8月, 2017 10 次提交
-
-
由 Thomas Petazzoni 提交于
The linker script for SuperH brings the .ppcenv and .ppcenvr section of common/env_embedded.o into the .text section. However, the .ppcenv section is only ever filled in by env_embedded.o when CONFIG_SYS_USE_PPCENV is defined, but no platforms in mainline U-Boot use this. In addition, common/env_embedded.o is not always built (when you use CONFIG_ENV_IS_NOWHERE for example), which causes the following build failure: Fixes: LD u-boot /home/thomas/sh4aeb-linux-musl/bin/sh4aeb-linux-ld.bfd: cannot find common/env_embedded.o We fix this by no longer adding the .ppcenv and .ppcenvr sections from common/env_embedded.o into the .text section. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Thomas Petazzoni 提交于
The SuperH architecture allows to be run in either little or big endian mode. Some SuperH SoCs get the little vs. big endian decision through mode pins sampled at reset, so if big endian has been choosen by HW designers, it cannot be easily changed. Therefore, it makes sense to allow building U-Boot for SuperH in big endian mode. To allow this, the only change needed is to adjust the OUTPUT_FORMAT() in the linker script. Signed-off-by: NThomas Petazzoni <thomas.petazzoni@free-electrons.com>
-
由 Marek Vasut 提交于
Enable the MMC and USB DM on the board since it's the modern method and now supported by the drivers. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Enable the MMC and USB DM on the board since it's the modern method and now supported by the drivers. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Drop the SH SDHI bit from the board since SD now probes from DT instead. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Drop the SH SDHI bit from the board since SD now probes from DT instead. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Drop the Serial SH bit from the board since UART now probes from DT instead. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Drop the Serial SH bit from the board since UART now probes from DT instead. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Drop the RAVB bit from the board since RAVB now probes from DT instead. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-
由 Marek Vasut 提交于
Drop the RAVB bit from the board since RAVB now probes from DT instead. Signed-off-by: NMarek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: NNobuhiro Iwamatsu <iwamatsu@nigauri.org>
-