提交 c2150e4d 编写于 作者: T Tom Rini
......@@ -178,7 +178,7 @@ __maybe_weak u64 flash_read64(void *addr)
/*-----------------------------------------------------------------------
*/
#if defined(CONFIG_ENV_IS_IN_FLASH) || defined(CONFIG_ENV_ADDR_REDUND) || (CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE)
flash_info_t *flash_get_info(ulong base)
static flash_info_t *flash_get_info(ulong base)
{
int i;
flash_info_t *info;
......@@ -355,8 +355,8 @@ static ulong flash_read_long (flash_info_t * info, flash_sect_t sect,
/*
* Write a proper sized command to the correct address
*/
void flash_write_cmd (flash_info_t * info, flash_sect_t sect,
uint offset, u32 cmd)
static void flash_write_cmd(flash_info_t *info, flash_sect_t sect,
uint offset, u32 cmd)
{
void *addr;
......@@ -2298,7 +2298,7 @@ static void cfi_flash_set_config_reg(u32 base, u16 val)
/*-----------------------------------------------------------------------
*/
void flash_protect_default(void)
static void flash_protect_default(void)
{
#if defined(CONFIG_SYS_FLASH_AUTOPROTECT_LIST)
int i;
......
......@@ -81,7 +81,6 @@ typedef unsigned long flash_sect_t;
/* Prototypes */
extern unsigned long flash_init (void);
extern void flash_protect_default(void);
extern void flash_print_info (flash_info_t *);
extern int flash_erase (flash_info_t *, int, int);
extern int flash_sect_erase (ulong addr_first, ulong addr_last);
......@@ -114,10 +113,6 @@ extern int jedec_flash_match(flash_info_t *info, ulong base);
#define CFI_CMDSET_AMD_LEGACY 0xFFF0
#endif
#if defined(CONFIG_SYS_FLASH_CFI)
extern flash_info_t *flash_get_info(ulong base);
#endif
/*-----------------------------------------------------------------------
* return codes from flash_write():
*/
......
......@@ -165,8 +165,6 @@ extern int cfi_flash_num_flash_banks;
#define CFI_MAX_FLASH_BANKS CONFIG_SYS_MAX_FLASH_BANKS
#endif
void flash_write_cmd(flash_info_t * info, flash_sect_t sect,
uint offset, u32 cmd);
phys_addr_t cfi_flash_bank_addr(int i);
unsigned long cfi_flash_bank_size(int i);
void flash_cmd_reset(flash_info_t *info);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册