- 14 7月, 2014 4 次提交
-
-
由 Pavel Machek 提交于
Timer on cyclone5 actually counts down. It took me a while to figure out, as timer counting in wrong direction actually _can_ be used, it just appears to tick at extremely high frequency in u-boot. The bug was introduced in commit 23ab7ee0. Signed-off-by: NPavel Machek <pavel@denx.de> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Lokesh Vutla 提交于
Update the board_name env variable and accordingly populate the dtb file. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Masahiro Yamada 提交于
In the previous commit, all the board fields were filled. Now we can use "-" in the board field for a different meaning. Going forward, "-" stands for no board directory as in cpu, soc, vendor fields. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
The boards.cfg file has allowed to use "-" for the board (= 6th) field if the board name is the same as the 7th field. But I notice one problem. Because tools/reformat.py sorts the lines in the simple alphabetical order (= the order of character code), some entries for the same board are not lined up together. For example, "bf527-ezkit" and "bf527-ezkit-v2" share the same board. But they are located separately because "bf527-ezkit" fills the board field with "-" whereas "bf527-ezkit-v2" specifies it explicitely. The similar things can be seen: - between "trizepsive" and "polaris" - between "RRvision" and "RRvision_LCD" - between "korat" and "korat_perm" - between "lwmon5" and "lcd4_lwmon5" This commit was generated by the following command: awk '$6 == "-" { $6 = $7 } { print }' boards.cfg \ | tools/reformat.py -i -d '-' -s 8 > boards0.cfg; \ mv boards0.cfg boards.cfg Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
- 12 7月, 2014 1 次提交
-
-
- 10 7月, 2014 3 次提交
-
-
由 Eric Nelson 提交于
The pad settings for DISP0_DATA02 and DISP0_DAT10 were not set in the same way as DISP0_DAT00-23, causing much flicker in parallel RGB displays on Dual-Lite and Solo processors. These settings now match the i.MX6 Dual and Quad core versions. Note that this fixes a regression in commit b47abc36 and that this is the second time we've had a regression on these two pads (See commit e654ddf7). Signed-off-by: NEric Nelson <eric.nelson@boundarydevices.com> Acked-by: NOtavio Salvador <otavio@ossystems.com.br>
-
由 Felipe Balbi 提交于
Newer AM437x silicon requires us to explicitly power up the USB2 PHY. By implementing usb_phy_power() we can achieve that. Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Felipe Balbi 提交于
some boards won't work if the PHY isn't explicitly powered up. Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 09 7月, 2014 11 次提交
-
-
由 Michal Simek 提交于
This is a MIME GnuPG-signed message. If you see this text, it means that your E-mail or Usenet software does not support MIME signed messages. The Internet standard for MIME PGP messages, RFC 2015, was published in 1996. To open this message correctly you will need to install E-mail or Usenet software that supports modern Internet standards. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Lokesh Vutla 提交于
Updating omap4_sdp/panda and omap5_uevm maintainer. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Acked-by: NR Sricharan <r.sricharan@ti.com>
-
-
由 Fabio Estevam 提交于
Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces set_ldo_voltage() function that can be used to set the voltages of any of the three LDO regulators controlled by the PMU_REG_CORE register. Prior to this commit there was a single set_vddsoc() which only configured the VDDSOC regulator. Update the comments to align with the new set_ldo_voltage() implementation. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
-
由 Andre Renaud 提交于
DIV_SELECT is used as Fout = Fin * div_select / 2.0, so we should do the shift after the multiply to avoid rounding errors Signed-off-by: NAndre Renaud <andre@bluewatersys.com>
-
由 Lothar Rubusch 提交于
Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NLothar Rubusch <lothar@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de>
-
由 Marek Vasut 提交于
Adjust the mtdparts settings to allow for alternative boot images and for using UBI. Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
由 Marek Vasut 提交于
- "env ask", "env grep" and "setexpr" are needed for commissioning - add support for ext4 file systems - adjust default environment to use ext4 commands - add write support for (V)FAT and EXT4 - add bitmap and splashscreen support - print timestamp information for images Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NWolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
由 Lothar Rubusch 提交于
Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NLothar Rubusch <lothar@denx.de>
-
由 Marek Vasut 提交于
Adjust the mtdparts to also consider factory-programmed config block. Signed-off-by: NMarek Vasut <marex@denx.de>
-
由 Marek Vasut 提交于
- "env ask", "env grep" and "setexpr" are needed for commissioning - add support for ext4 file systems - adjust default environment to use ext4 commands - add write support for (V)FAT and EXT4 - add bitmap and splashscreen support - print timestamp information for images Signed-off-by: NMarek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
-
- 08 7月, 2014 21 次提交
-
-
-
由 Tyler Baker 提交于
The following patch re-enables the dhcp functionality on omap3_beagle. It was removed with df4dbb5d when omap3_beagle was converted to use ti_omap3_common.h. I have tested beagleboard and beagleboard-xm with this patch and confirmed dhcp is working. Signed-off-by: NTyler Baker <tyler.baker@linaro.org>
-
由 Alexey Ignatov 提交于
Fixes a bug when objcopy doesn't put .dtb.init.rodata section to resulting u-boot.bin, so u-boot was unable to find embedded DTB.
-
由 Ian Campbell 提交于
Signed-off-by: NIan Campbell <ijc@hellion.org.uk> Acked-by: NHans de Goede <hdegoede@redhat.com>
-
由 Dirk Eibach 提交于
sha256 has some beefy memory footprint. Make it optional for constrained systems. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Commit "2842c1c2 fit: add sha256 support" badly increased memory footprint, so some of our boards did not build anymore. Since monitor base must not be changed I removed some commands to save memory. Maybe making sha256 optional for fit would be an option for the future since it really has some beefy footprint. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
To avoid peer "ChReceivePathStatus"-messages on iocon startup, initialize PHYs as soon as possible. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
For proper displayport performance, scrambling has to be enabled, but is turned off on DP501 by default. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
The I2C bridge on DP501 supports EDID, MCCS and HDCP by default. Allow EDID only to avoid I2C address conflicts. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
PPC4xx config options were not complete. ICS8N3QV01 and SIL1178 needed some more configuration. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
IHS I2C master support was merely a hack in the osd driver. Now it is a proper u-boot I2C framework driver, supporting the v2.00 master features. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
There is a new iocon hardware flavor, supporting DisplayPort finally. Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Dirk Eibach 提交于
readl was called with values instead of pointers to these values. Why this ever did work is a mystery... Signed-off-by: NDirk Eibach <dirk.eibach@gdsys.cc>
-
由 Masahiro Yamada 提交于
Since ARRAY_SIZE macro is defined in include/common.h, re-defining it in arch-specific files is redundant. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NSonic Zhang <sonic.zhang@analog.com>
-
由 Vasili Galka 提交于
Add invalidate_dcache_range() and flush_dcache_range() for the blackfin architecture. Such functions already exist on this arch with different names, so just forward the call. This fixes the build of bf609-ezkit board as it uses drivers/net/designware.c which requires the above functions. Cc: Sonic Zhang <sonic.adi@gmail.com>, Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: NVasili Galka <vvv444@gmail.com>
-
由 Vasili Galka 提交于
get_sclk() was not defined in bfin_wdt.c, include the corresponding header. Cc: Sonic Zhang <sonic.adi@gmail.com> Signed-off-by: NVasili Galka <vvv444@gmail.com>
-
由 Vasili Galka 提交于
The csarX and cscrX registers in the fbcs_t struct are 16-bit for CONFIG_M5235 and 32-bit wide otherwise. The code in cpu_init.c accessed them always as 32-bit, effectively creating a wrong memory access on M5235. Fixed that by choosing out_be16/out_be32 depending on whether CONFIG_M5235 is defined or not. Cc: Jason Jin <Jason.jin@freescale.com> Signed-off-by: NVasili Galka <vvv444@gmail.com>
-