- 25 1月, 2014 15 次提交
-
-
由 Masahiro Yamada 提交于
We do not have to define CONFIG_4xx in board config headers because it is defined in arch/powerpc/cpu/ppc4xx/config.mk. include/configs/JSE.h defines "CONFIG_4x", not "CONFIG_4xx". I believe it is a typo because "CONFIG_4x" is not used at all in other files. So, I also deleted "CONFIG_4x" in include/configs/JSE.h. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Commit e5c5301f refactored the build system not to make directories in board makefiles. But commit 8f380381 create directories again in board/avionic-design/tec-ng/Makefile. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Alban Bedel <alban.bedel@avionic-design.de>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NStefan Roese <sr@denx.de> Acked-by: NMatthias Fuchs <matthias.fuchs@esd.eu>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
Like other architectures, CONFIG_AVR32 can be defined in arch/avr32/config.mk rather than board header files. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: NAndreas Bießmann <andreas.devel@googlemail.com>
-
由 Masahiro Yamada 提交于
Commit 643aae14 deleted include/linux/config.h but missed to delete _LINUX_CONFIG_H macro. It is no longer used at all. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Masahiro Yamada 提交于
The script files, define2mk.sed and make-asm-offsets are used to create autoconf.mk and asm-offsets.h while build. Whereas README, dot.kermrc, flash_param, send_cmd, send_image are files useful for kermit. We should not put files which have the totally different purpose into the same directory. This commit creates a new directory, tools/kermit, and move kermit files into it. Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com> Cc: Wolfgang Denk <wd@denx.de>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Darwin Rambo 提交于
When CONFIG_SYS_VSNPRINTF is enabled, it protects print operations such as sprintf, snprintf, vsnprintf, etc., from buffer overflows. But vsnprintf_internal includes the terminating NULL character in the calculation of number of characters written. This affects sprintf and snprintf return values. Fix this issue by setting pointer 'str' back to the location of the '\0'. Signed-off-by: NDarwin Rambo <drambo@broadcom.com> Reviewed-by: NSteve Rae <srae@broadcom.com>
-
由 Darwin Rambo 提交于
If timer_init() is made a weak stub function, then it allows us to remove several empty timer_init functions for those boards that already have a timer initialized when u-boot starts. Architectures that use the timer framework may also remove the need for timer.c. Signed-off-by: NDarwin Rambo <drambo@broadcom.com> Reviewed-by: NTim Kryger <tim.kryger@linaro.org>
-
- 23 1月, 2014 3 次提交
-
-
由 Haijun.Zhang 提交于
On BSC9131, BSC9132, P1010 : For High Capacity SD Cards (> 2 GBytes), the 32-bit source address specifies the memory address in block address format. Block length is fixed to 512 bytes as per the SD High Capacity specification. So we need to convert the block address format to byte address format to calculate the envaddr. If there is no enough space for environment variables or envaddr is larger than 4GiB, we relocate the envaddr to 0x400. The address relocated is in the front of the first partition that is assigned for sdboot only. Signed-off-by: NHaijun Zhang <haijun.zhang@freescale.com> Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Haijun.Zhang 提交于
The upper 4 data signals of esdhc are shared with spi flash. So detect if the upper 4 pins are assigned to esdhc before enable sdhc 8 bit width. Signed-off-by: NHaijun Zhang <haijun.zhang@freescale.com> Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Haijun.Zhang 提交于
Card detection pin is ineffective on T4240QDS Rev1.0. There are two cards can be connected to board. 1. eMMC card is built-in board, can not be removed. so For eMMC card it is always there. 2. Card detecting pin is functional for SDHC card in Rev2.0. This workaround force sdhc driver scan and initialize the card regardless of whether the card is inserted or not in case Rev1.0. Signed-off-by: NHaijun Zhang <Haijun.Zhang@freescale.com> Acked-by: NPantelis Antoniou <panto@antoniou-consulting.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 22 1月, 2014 12 次提交
-
-
由 Prabhakar Kushwaha 提交于
u-boot binary size for Freescale mpc85xx platforms is 512KB. This has been reached to upper limit for some of the platforms causig linker error. So, Increase the u-boot binary size to 768KB. Signed-off-by: NYork Sun <yorksun@freescale.com> Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com>
-
由 Shengzhou Liu 提交于
This patch reverts patch 'add ft_fixup_xgec to support 3rd and 4th 10GEC'. When dual-role MAC acts as 10G,it still uses fsl,fman-port-1g-rx/tx as before. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Acked-by: NYork Sun <yorksun@freescale.com>
-
由 Prabhakar Kushwaha 提交于
Rename CONFIG_PBLRCW_CONFIG and CONFIG_PBLRCW_CONFIG. Also add their details in README. Signed-off-by: NPrabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shengzhou Liu 提交于
- Optimize UDIMM parameters for whole range from 1500MT/s to 2140MT/s. - Remove unused patameters: 'cpo', 'wrdata delay', '2T', which are unrelated to DDR3/3L. Tested with UDIMM 9JSF25672AZ-2G1K1 and verified speed 1200/1866/2133MT/s. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Po Liu 提交于
Using the TPL/SPL method to booting from 8k page NAND flash. - Add 256kB size SRAM tlb for second step booting; - Add spl.c for TPL image boot; - Add spl_minimal.c for minimal SPL image; - Add C29XPCIE_NAND configure; - Modify C29XPCIE.h for nand config and enviroment; Signed-off-by: NPo Liu <Po.Liu@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Po Liu 提交于
Using the TPL method for nand boot by sram was already supported. Here add some code for mpc85xx ifc nand boot. - For ifc, elbc, esdhc, espi, all need the SPL without section .resetvec. - Use a clear function name for nand spl boot. - Add CONFIG_SPL_DRIVERS_MISC_SUPPORT to compile the fsl_ifc.c in spl/Makefile; Signed-off-by: NPo Liu <Po.Liu@freescale.com> Acked-by: NScott Wood <scottwood@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 York Sun 提交于
Existing workaround only handles one RDIMM on reference design. In case of two RDIMMs being used, the workaround requires two separate writes to DDR_SDRAM_MD_CNTL register. This patch also restores two debug registers changed by the workaround. Signed-off-by: NYork Sun <yorksun@freescale.com> CC: Ben Collins <ben.c@servergy.com> CC: James Yang <James.Yang@freescale.com>
-
由 York Sun 提交于
Unfortunately a typo presents "DDR-A003473" instead of "DDR-A003474". Signed-off-by: NYork Sun <yorksun@freescale.com>
-
由 Shengzhou Liu 提交于
Enable Erratum A006379 for T2080, T2081, T4160, B4420. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shengzhou Liu 提交于
- add more serdes protocols support. - fix some serdes lanes route. - fix SGMII doesn't work and incorrect mdio display for XFI when serdes 0x6d. - correct boot location info for SD/SPI boot. Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Ramneek Mehresh 提交于
Defines get_svr() for 83xx devices Signed-off-by: NRamneek Mehresh <ramneek.mehresh@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Priyanka Jain 提交于
Update following DDR related settings for T1040QDS -Correct number of chip selects to two as t1040qds supports two Chip selects. -Update board_specific_parameters udimm structure with settings derived via calibration. -Reduced I2C speed to 50KHz as DDR-SPD does not get reliably read at 400KHz. Verified the updated settings to be working fine with dual-ranked Micron, MT18KSF51272AZ-1G6 DIMM at data rate 833MT/s, 1333MT/s and 1600MT/s. Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: NPriyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 21 1月, 2014 4 次提交
-
-
由 Tom Rini 提交于
Signed-off-by: NTom Rini <trini@ti.com>
-
由 Tom Rini 提交于
The change to add 64bit initrd support broke 32bit initrd support as it always set 64bits worth of data into the properties, even on 32bit systems. The fix is to use addr_cell_len (which already says how much data is in 'tmp') to set the property, rather than always setting 8. Thanks to Stephen Warren for pointing out the fix here. Reported-by: NOtavio Salvador <otavio@ossystems.com.br> Signed-off-by: NTom Rini <trini@ti.com>
-
由 Stephen Warren 提交于
My original intention was to have a 100ms timeout. However, the timer operations used return values in ms not us, so we ended up with a 100s timeout instead. Fixing this exposes that some operations need longer to operate than 100ms, so bump the timeout up to a whole second. Reported-by: NAndre Heider <a.heider@gmail.com> Reviewed-by: NAndre Heider <a.heider@gmail.com> Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
-
由 Stephen Warren 提交于
Send RPC commands to the VideoCore to turn on the SDHCI and USB modules. For SDHCI this isn't needed in practice, since the firmware already turned on the power in order to load U-Boot. However, it's best to be explicit. For USB, this is necessary, since the module isn't powered otherwise. This will allow the kernel USB driver to work. Signed-off-by: NStephen Warren <swarren@wwwdotorg.org>
-
- 20 1月, 2014 6 次提交
-
-
由 Dan Murphy 提交于
The spl directory is ignored by git as these objects are created during spl creation. The only file not created is the Makefile. This file can be modified and checked in via git. Due to the order of rule precedence having the whole directory ignored first then indicating not to ignore the Makefile is not correct the message to force adding the Makefile is still shown. So reorder the .gitignore for the Makefile and indicate that the Makefile does not need to be ignored first and then indicate everything else in spl should be ignored after wards. Signed-off-by: NDan Murphy <dmurphy@ti.com>
-
由 Masahiro Yamada 提交于
Signed-off-by: NMasahiro Yamada <yamada.m@jp.panasonic.com>
-
由 Charles Manning 提交于
The summary already has other verification. This one is not needed. The check caused summaries to be ignored if they were not on the numbered block. This caused problems when a summary was embedded in an image and the image is written to a flash with bad blocks. Signed-off-by: NCharles Manning <cdhmanning@gmail.com>
-
由 Ionut Nicu 提交于
For files where we actually have extent indexes following an extent header (ext_block->eh_depth != 0), the do/while loop from ext4fs_get_extent_block() does not select the proper extent index structure. For example, if we have: ext_block->eh_depth = 1 ext_block->eh_entries = 1 fileblock = 0 index[0].ei_block = 0 the do/while loop will exit with i set to 0 and the ext4fs_get_extent_block() function will return 0, even if there was a valid extent index structure following the header. Signed-off-by: NIonut Nicu <ioan.nicu.ext@nsn.com> Signed-off-by: NMathias Rulf <mathias.rulf@nsn.com>
-
由 Ionut Nicu 提交于
Using fs->blksz in ext4fs_get_extent_block() is not correct since fs->blksz is not initialized on the read path. Use EXT2_BLOCK_SIZE() instead which will produce the desired output. Signed-off-by: NIonut Nicu <ioan.nicu.ext@nsn.com> Signed-off-by: NMathias Rulf <mathias.rulf@nsn.com>
-
由 Piotr Wilczek 提交于
Universal uses only one adapter I2C_0. Signed-off-by: NPiotr Wilczek <p.wilczek@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Acked-by: NPrzemyslaw Marczak <p.marczak@samsung.com>
-