- 30 10月, 2015 2 次提交
-
-
由 Gong Qianyu 提交于
For most PPC platforms, they will call the first get_clocks() in init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is then defined to call the second get_clocks(), which should be redundant for PPC. Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Shaohui Xie 提交于
To support on board Aquantia's PHY AQR405. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 27 10月, 2015 3 次提交
-
-
由 Alison Wang 提交于
As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in SD boot now. For the customer's demand, QSPI needs to be supported in SD boot too. This patch adds QSPI or IFC support in SD boot according to the corresponding defconfig. For detail, ls1021atwr_sdcard_ifc_defconfig is used to support IFC in SD boot and ls1021atwr_sdcard_qspi_defconfig is used to support QSPI in SD boot. Signed-off-by: NAlison Wang <alison.wang@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Zhao Qiang 提交于
The address of uboot changed, so change qe ucode Signed-off-by: NZhao Qiang <B45475@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
由 Scott Wood 提交于
This will allow OF-based earlycon to be used once the appropriate aliases are added to the device tree and kernel support is fixed. Signed-off-by: NScott Wood <scottwood@freescale.com> Reviewed-by: NYork Sun <yorksun@freescale.com>
-
- 25 10月, 2015 3 次提交
-
-
由 Gong Qianyu 提交于
get_clocks() should not be limited by ESDHC. Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>
-
由 Masahiro Yamada 提交于
We have finished Generic Board conversion for ARM and PowerPC, i.e. all the boards have been converted except OpenRISC, SuperH, SPARC, which have not supported Generic Board framework yet. Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro defines in include/configs/*.h. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Guillaume GARDET 提交于
Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support and enable it to set 'board_rev' and 'board_name' envs. 'board_rev' can be used in scripts to determine what board we are running on and 'board_name' for pretty printing. Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr> Cc: Stephen Warren <swarren@wwwdotorg.org> Acked-by: NStephen Warren <swarren@wwwdotorg.org>
-
- 23 10月, 2015 24 次提交
-
-
由 Thomas Chou 提交于
Convert altera_tse to driver model and phylib. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NMarek Vasut <marex@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Chou 提交于
As we use device tree to control u-boot now, the generic board can be removed. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Thomas Chou 提交于
Convert altera sysid to driver model with misc uclass. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NChin Liang See <clsee@altera.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Chou 提交于
Convert altera timer to driver model. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NChin Liang See <clsee@altera.com>
-
由 Thomas Chou 提交于
Convert altera_pio to driver model. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NChin Liang See <clsee@altera.com> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Chou 提交于
Convert altera_uart to driver model. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Reviewed-by: NSimon Glass <sjg@chromium.org> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
Convert altera_jtag_uart to driver model. Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de> Reviewed-by: NSimon Glass <sjg@chromium.org>
-
由 Thomas Chou 提交于
Move the timer code from interrupts.c into timer.c . Eliminate the installation of timer interrupt handler, which is no longer used. Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Thomas Chou 提交于
Zap almost all of the ad-hoc timer code from interrupts.c and use the code in lib/time.c instead. Signed-off-by: NMarek Vasut <marex@denx.de> Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Thomas Chou 提交于
As altera_pio_init() uses BSS, it should be moved to board_early_init_r(). Signed-off-by: NThomas Chou <thomas@wytron.com.tw> Acked-by: NMarek Vasut <marex@denx.de>
-
由 Thomas Chou 提交于
This patch moves command line configuration from board header file to board defconfig in the way of Kconfig. The change passed savedefconfig. This fixes warnings such as : "CONFIG_SYS_HUSH_PARSER" redefined, when "Use hush shell" is selected with menuconfig, etc. Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
-
由 Mugunthan V N 提交于
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> asdfsadf
-
由 Mugunthan V N 提交于
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Mugunthan V N 提交于
Tested on am437x gp evm and am437x sk evm Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Mugunthan V N 提交于
Since spl doesn't support DM currently, do not define DM_MMC for spl build. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Lokesh Vutla 提交于
Add config file for k2g Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NVitaly Andrianov <vitalya@ti.com>
-
由 Vitaly Andrianov 提交于
Add clock information for Galileo Signed-off-by: NVitaly Andrianov <vitalya@ti.com> Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
-
由 Lokesh Vutla 提交于
Import k2hk specific DT files from Linux Kernel and enable OF_CONTROL, DM, DM_SERIAL. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Lokesh Vutla 提交于
If CONFIG_SYS_MALLOC_F_LEN is enabled, the stack is moved down to the specified size to make the malloc function available before relocation. But on keystone platforms SYS_SPL_MALLOC is immediately preceding stack, which is causing an overlap with this config enabled. So leave a gap between malloc space and stack space. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
-
由 Tom Rini 提交于
Tested on J6Eco EVM Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Tom Rini 提交于
Tested on Pandaboard Signed-off-by: NTom Rini <trini@konsulko.com>
-
由 Mugunthan V N 提交于
Since usb ether gadget doesn't have support for driver model, so not defining usb ether gadget when ethernet driver model is defined. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Reviewed-by: NTom Rini <trini@konsulko.com>
-
由 Sjoerd Simons 提交于
Add support for distro bootcmds and network booting while retaining backwards compatibility with the current "legacy" setup. With these changes the default boot sequence becomes: * SD card (standard distro boot) * SD card (legacy boot) * EMMC (standard distro boot) * EMMC (legacy boot) * Nand (legacy boot) * PXE (standard distro boot) * DHCP (standard distro boot) The older boot scripts have some overlap with what the distro bootcommands to however i've left them unchanged to prevent introduction of subtle bugs. Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
-
由 Sjoerd Simons 提交于
Add mandatory address variables for loading scripts and pxe configuration as per README.distro Signed-off-by: NSjoerd Simons <sjoerd.simons@collabora.co.uk>
-
- 22 10月, 2015 1 次提交
-
-
由 George McCollister 提交于
Advantech SOM-6896 is a Broadwell U based COM Express Compact Module Type 6. This patch adds support for it as a coreboot payload. On board SATA and SPI are functional. On board Ethernet isn't functional but since it's optional and ties up a PCIe x4 that is otherwise brought out, this isn't a concern at the moment. USB doesn't work since the xHCI driver appears to be broken. Signed-off-by: NGeorge McCollister <george.mccollister@gmail.com> Reviewed-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org> Reviewed-by: NTom Rini <trini@konsulko.com>
-
- 21 10月, 2015 7 次提交
-
-
由 Bin Meng 提交于
Convert CONFIG_CMD_ELF to Kconfig and tidy up affected boards. Signed-off-by: NBin Meng <bmeng.cn@gmail.com>
-
由 Bin Meng 提交于
CONFIG_HOSTNAME is an environment varible, so that quotation mark is not needed. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Bin Meng 提交于
Add a Kconfig option to disable the Integrated Graphics Device (IGD) so that it does not show in the PCI configuration space as a VGA disaplay controller. This gives a chance for U-Boot to run PCI/PCIe based graphics card's VGA BIOS and use that for the graphics console. Signed-off-by: NBin Meng <bmeng.cn@gmail.com> Acked-by: NSimon Glass <sjg@chromium.org>
-
由 Stefan Roese 提交于
This patch enables DM_SERIAL for all ARCH_MVEBU boards (AXP & A38x). Signed-off-by: NStefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
由 Stefan Roese 提交于
This patch enables DM_USB on the Marvell AXP / A38x eval boards. Signed-off-by: NStefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Luka Perkov <luka.perkov@sartura.hr>
-
由 Stefan Roese 提交于
When running on the AXP I sometimes noticed a strange behavior. As some characters are not echoed on the U-Boot prompt. Not disabling the lowlevel_init code, especially calling cpu_init_cp15() in the main U-Boot seems to solve this issue. Signed-off-by: NStefan Roese <sr@denx.de>
-
由 Maxime Ripard 提交于
Not all sunxi boards have an MMC embedded. Switching to the Kconfig option will allow to enable or disable the support in each boards' defconfig. Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NHans de Goede <hdegoede@redhat.com>
-