For most PPC platforms, they will call the first get_clocks() in
init_sequence_f[] as they define CONFIG_PPC. CONFIG_SYS_FSL_CLK is
then defined to call the second get_clocks(), which should be
redundant for PPC.
Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

To support on board Aquantia's PHY AQR405.
Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

The SEC driver code has been cleaned up to work for 64 bit
physical addresses and systems where endianess of SEC block
is different from the Core.
Changes:
1. Descriptor created on Core is modified as per SEC block
   endianness before the job is submitted.
2. The read/write of physical addresses to Job Rings will
   be depend on endianness of SEC block as 32 bit low and
   high part of the 64 bit address will vary.
3. The 32 bit low and high part of the 64 bit address in
   descriptor will vary depending on endianness of SEC.
Signed-off-by: NAneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

For the Chain of Trust, the esbc_validate command supports
32 bit fields for location of the image. In the header structure
definition, these were declared as pointers which made them
64 bit on a 64 bit core.
Signed-off-by: NAneesh Bansal <aneesh.bansal@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in
SD boot now. For the customer's demand, QSPI needs to be supported in SD
boot too.

This patch adds QSPI or IFC support in SD boot according to the
corresponding defconfig. For detail, ls1021atwr_sdcard_ifc_defconfig is
used to support IFC in SD boot and ls1021atwr_sdcard_qspi_defconfig is
used to support QSPI in SD boot.
Signed-off-by: NAlison Wang <alison.wang@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

The address of uboot changed, so change qe ucode
Signed-off-by: NZhao Qiang <B45475@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

This will allow OF-based earlycon to be used once the appropriate
aliases are added to the device tree and kernel support is fixed.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Reviewed-by: NYork Sun <yorksun@freescale.com>

get_clocks() should not be limited by ESDHC.
Signed-off-by: NGong Qianyu <Qianyu.Gong@freescale.com>

We have finished Generic Board conversion for ARM and PowerPC, i.e.
all the boards have been converted except OpenRISC, SuperH, SPARC,
which have not supported Generic Board framework yet.

Select SYS_GENERIC_BOARD in arch/Kconfig and delete all the macro
defines in include/configs/*.h.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Under the assumptions of having a UBI volume called boot, containing
a ubifs filesystem.
Signed-off-by: NRoy Spliet <rspliet@eclipso.eu>
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NStephen Warren <swarren@nvidia.com>

Add generic fs support, so that commands like ls, load and test -e can be
used on ubifs.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Implement the necessary functions for implementing generic fs support
for ubifs.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Modify the ubifs u-boot wrapper function prototypes for generic fs use,
and give them their own header file.

This is a preparation patch for adding ubifs support to the generic fs
code from fs/fs.c.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NHeiko Schocher <hs@denx.de>

Add CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG support and enable it to set
'board_rev' and 'board_name' envs.
'board_rev' can be used in scripts to determine what board we are running on
and 'board_name' for pretty printing.
Signed-off-by: NGuillaume GARDET <guillaume.gardet@free.fr>

Cc: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>

For current U-Boot to initialize status LEDs via status_led_init(), it
is required to have both CONFIG_STATUS_LED and STATUS_LED_BOOT defined.
This may be a particular concern with GPIO LEDs, where __led_init() is
required to correctly set up the GPIO (gpio_request and
gpio_direction_output). Without STATUS_LED_BOOT the initialization isn't
called, which could leave the user with a non-functional "led" command -
due to the fact that the LED routines in gpio_led.c use gpio_set_value()
just fine, but the GPIO never got set up properly in the first place.

I think having CONFIG_STATUS_LED is sufficient to justify a
corresponding call to status_led_init(), even with no STATUS_LED_BOOT
defined. To do so, common/board_r.c needs call that routine, so it now
is exposed via status_led.h.
Signed-off-by: NBernhard Nortmann <bernhard.nortmann@web.de>
[trini: Add dummy __led_init to pca9551_led.c]
Signed-off-by: NTom Rini <trini@konsulko.com>

Convert altera_tse to driver model and phylib.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Reviewed-by: NMarek Vasut <marex@denx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

As we use device tree to control u-boot now, the generic
board can be removed.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

Convert altera sysid to driver model with misc uclass.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Acked-by: NChin Liang See <clsee@altera.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Implement a Miscellaneous uclass with generic read or
write operations. This class is used only for those
do not fit other more general classes.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Acked-by: NSimon Glass <sjg@chromium.org>

Both altera_jtag_serial_initialize() and
altera_serial_initialize() are no longer used after
they are converted to driver model.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Acked-by: NSimon Glass <sjg@chromium.org>
Acked-by: NMarek Vasut <marex@denx.de>

Convert altera timer to driver model.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Acked-by: NChin Liang See <clsee@altera.com>

Implement a Timer uclass to work with lib/time.c.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Acked-by: NSimon Glass <sjg@chromium.org>

Convert altera_pio to driver model.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Acked-by: NChin Liang See <clsee@altera.com>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Convert altera_uart to driver model.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Reviewed-by: NSimon Glass <sjg@chromium.org>
Acked-by: NMarek Vasut <marex@denx.de>

Convert altera_jtag_uart to driver model.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Acked-by: NMarek Vasut <marex@denx.de>
Reviewed-by: NSimon Glass <sjg@chromium.org>

Move the timer code from interrupts.c into timer.c . Eliminate the
installation of timer interrupt handler, which is no longer used.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

Zap almost all of the ad-hoc timer code from interrupts.c and
use the code in lib/time.c instead.
Signed-off-by: NMarek Vasut <marex@denx.de>
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

As altera_pio_init() uses BSS, it should be moved to
board_early_init_r().
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>
Acked-by: NMarek Vasut <marex@denx.de>

This patch moves command line configuration from board header
file to board defconfig in the way of Kconfig. The change passed
savedefconfig.

This fixes warnings such as : "CONFIG_SYS_HUSH_PARSER" redefined,
when "Use hush shell" is selected with menuconfig, etc.
Signed-off-by: NThomas Chou <thomas@wytron.com.tw>

Since spl doesn't support DM currently, do not define DM_MMC
for spl build.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>

asdfsadf

Import various DT files for am4372, an43xx pinctrl and
am437x-gp-evm from Linux Kernel v4.2
Add config file for this board, enable DM, DM_GPIO, DM_SERIAL
and DM_MMC.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: NLokesh Vutla <lokeshvutla@ti.com>

Since spl doesn't support DM currently, do not define DM_MMC
for spl build.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>

Tested on am437x gp evm and am437x sk evm
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>

Since spl doesn't support DM currently, do not define DM_MMC
for spl build.
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Reviewed-by: NTom Rini <trini@konsulko.com>

Add config file for k2g
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: NVitaly Andrianov <vitalya@ti.com>

Add clock information for Galileo
Signed-off-by: NVitaly Andrianov <vitalya@ti.com>
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com>

Import k2hk specific DT files from Linux Kernel and enable
OF_CONTROL, DM, DM_SERIAL.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>

If CONFIG_SYS_MALLOC_F_LEN is enabled, the stack is moved down to the
specified size to make the malloc function available before relocation.
But on keystone platforms SYS_SPL_MALLOC is immediately preceding stack,
which is causing an overlap with this config enabled.
So leave a gap between malloc space and stack space.
Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com>

Tested on J6Eco EVM
Signed-off-by: NTom Rini <trini@konsulko.com>

Tested on Pandaboard
Signed-off-by: NTom Rini <trini@konsulko.com>