arm: mvebu: Enable DM_USB on AXP / A38x boards

This patch enables DM_USB on the Marvell AXP / A38x eval boards.
Signed-off-by: NStefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Luka Perkov <luka.perkov@sartura.hr>

configs/db-88f6820-gp_defconfig

@@ -5,5 +5,10 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-388-gp"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_SPI_FLASH=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y

configs/db-mv784mp-gp_defconfig

@@ -5,6 +5,11 @@ CONFIG_DEFAULT_DEVICE_TREE="armada-xp-gp"
 CONFIG_SPL=y
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
+CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_NAND_PXA3XX=y
 CONFIG_SPI_FLASH=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y

include/configs/db-88f6820-gp.h

@@ -50,7 +50,6 @@
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_TFTPPUT
 #define CONFIG_CMD_TIME
-#define CONFIG_CMD_USB
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -93,9 +92,6 @@
 #define CONFIG_SUPPORT_VFAT
 
 /* USB/EHCI configuration */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI_MARVELL
 #define CONFIG_EHCI_IS_TDI
 
 /* Environment in SPI NOR flash */

include/configs/db-mv784mp-gp.h

@@ -42,7 +42,6 @@
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_TFTPPUT
 #define CONFIG_CMD_TIME
-#define CONFIG_CMD_USB
 
 /* I2C */
 #define CONFIG_SYS_I2C
@@ -52,9 +51,6 @@
 #define CONFIG_SYS_I2C_SPEED		100000
 
 /* USB/EHCI configuration */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_EHCI_MARVELL
 #define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 

include/configs/mv-common.h

@@ -128,7 +128,7 @@
 /*
  * Common USB/EHCI configuration
  */
-#ifdef CONFIG_CMD_USB
+#if defined(CONFIG_CMD_USB) && !defined(CONFIG_DM)
 #define CONFIG_USB_EHCI		/* Enable EHCI USB support */
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION